**** BEGIN LOGGING AT Sun Dec 15 02:59:57 2019 Dec 15 19:10:25 I have flashed a BBB with Debian. Then customized it. How to save the whole thing on the SDCard? Dec 15 19:21:28 hmm, pretty sure there's a script for it in /opt somewhere Dec 15 19:31:26 I found the beaglebone-black-eMMC-flasher script but it needs a lot of rework to "reverse" it. Anyway thanks for the hit. Dec 15 19:31:59 I'm pretty sure there's a script to create an sd card from eMMC contents, without any need to modify anything Dec 15 20:53:16 the script /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh seems to be the right candidate! Dec 15 21:00:39 :) Dec 15 23:12:12 https://www.hackster.io/functt/a-long-awaited-drone-w-bbblue-and-ardupilot-0ee27b for those of you who are bored not reading funny items accumulated through time, this funny-accumulation does it and well. Dec 15 23:12:21 Wait for the new video! Dec 15 23:12:30 Is that interesting or not? Dec 16 00:15:53 how does the SD to eMMC on the BBBlue work? Dec 16 00:17:00 Do I just change the, I never once did this transition, # mark to nothing by uncommenting the line in /boot for the eMMC support script and then turn on the BBBlue w/ the same SD Card in it and wait for it to finish installing? Dec 16 00:25:09 Sorry for the question. Forget about it. Dec 16 00:25:15 I had the incorrect SD in the slot. Oops. Dec 16 00:25:37 Too many SDs makes for a long day. Yikes. Dec 16 00:31:04 It works! Dec 16 00:34:52 The issue w/ arducopter and the BBBlue is this: Dec 16 00:35:00 ... Dec 16 00:35:55 Once the systemd .service file has been altered or interrupted by ejection of the SD Card or by setting up the eMMC from SD Card, the entire process of calibration needs to be restarted. Dec 16 00:36:42 Also, when using the SD Card instead of the onboard eMMC chip, rebinding needs to take place at certain intervals b/c of the SD Card being ejected. Dec 16 00:36:48 That is all for now. Dec 16 01:12:27 Anyway...for anyone using the BBBlue w/ arducopter, every time you calibrate the ESCs for any reason, you need to rebind the TX/RX. Dec 16 01:26:48 1. Systemd start up script. 2. Calibrate your ESCs. 3. Rebind the TX/RX. <<<<<< this is the cycle and it makes it so no one can use the arducopter software on the BBBlue. Dec 16 01:26:55 Sorry but blah!@ **** ENDING LOGGING AT Mon Dec 16 03:01:54 2019