**** BEGIN LOGGING AT Sat May 29 03:01:08 2021
May 29 15:23:40 <lolleren> hi, I'm trying to use pygame to draw graphics onto the frambuffer using the hdmi port of a BBAI from this example:
May 29 15:23:41 <lolleren> https://github.com/MarkAYoder/BeagleBoard-exercises/blob/a531dca3a5f52813623bd40ea42bc733decfc70d/displays/ili9341/fb/pygame/clock.py#L26
May 29 15:23:41 <lolleren> But getting "No suitable video driver found"
May 29 15:23:49 <lolleren> any ideas what might be wrong ?
May 29 15:25:36 <lolleren> If that wasnt obvious, the HDMI display works fine. and I see that I can write to the framebuffer using "sudo cat /dev/urandom > /dev/fb0"
May 29 20:15:50 <petre> I've got a BBB running Debian 10.3.  I just switched it from using DHCP to a static address by editing /etc/network/interfaces.  But now when it boots up, it's binding both the static address and the dynamic address to eth0.  How do I get it to stop using the dynamic address?
May 29 20:17:27 <petre> I also see a "Failed to start Raise network interfaces" message when it's booting up, although when I login in and run 'ip a' I see both address bound to eth0 still.
May 29 20:53:51 <set_> Hmm.
May 29 20:54:16 <set_> Let me see if I can find that write up of the changing of network(s).
May 29 20:56:25 <set_> Dang it. I only found the person that does the write up of USB networkin' on an older Ubuntu dev. desktop.
May 29 20:57:40 <set_> https://gist.github.com/pdp7/d2711b5ff1fbb000240bd8337b859412 may help a bit.
May 29 20:57:52 <set_> I found others around but I have not tested them in a bit.
May 29 20:59:42 <ds2> anyone else finding the discourse mail feature to be a total and complete waste of time?
May 29 21:00:48 <ds2> every single mail shows up as "[BeagleBoard] Summary" WTF
May 29 21:29:24 <set_> Me!
May 29 21:29:32 <set_> ?
May 29 21:29:40 <set_> Oh.
May 29 21:29:55 <set_> ds2: You obviously want a selected few?
May 29 21:32:25 <set_> I am not sure if there is a way to figure that out.
**** ENDING LOGGING AT Sun May 30 02:59:57 2021