**** BEGIN LOGGING AT Wed Feb 23 02:59:57 2022 Feb 23 13:35:17 when i try to stop or start pru cores, i usually get an error like IO error , or "/lib/firmware/am57xx-pru1_1-fw  deos not exist" any idea why this happens and how i can mitigate it Feb 23 13:35:41 sometimes reboot works, sometimes i have to reflash the image Feb 23 14:28:44 Any idea when Single Board  item# BBB01-SC-505 will be available? Feb 23 14:41:22 Guest33: keep your eye on Seeed: 102110420 https://www.digikey.com/en/products/detail/beagleboard-by-seeed-studio/102110420/12719590 we had 10k of these 3 weeks ago... expecting more of them before GHI's build.. Feb 23 14:44:34 Yes we have on order with Digikey for a month now,  but lead time is no good.  Mouser shows expecting 7/22/2022 but not sure if that is actuate.  Thank you for your help Feb 23 14:45:10 Guest33: the longest delay is the pmic on the build.. Feb 23 14:45:59 Guest33: honesty, i'd call customer service and either switch the part on your order, or have dual orders.. Feb 23 14:49:42 I've given this information to our engineer.  I am only the buyer. Thank you for you help. Feb 23 18:16:29 Try industryial one (beagleboard industry) if that would fit, check with the engineer. Normally it should be fine to replace with. Feb 23 18:16:49 Farnell looks for 24 of june for that model. Feb 23 18:20:42 farnell is showing regular BBBs available in a few weeks, and more in early may Feb 23 19:09:44 every dist should get around 10k every month... based on what TI promised in parts to BeagleBoard.. Feb 23 23:55:54 Is it possible to create, on the fly, a new console at some usb-to-serial? e.g. user1 on the J1 serial, and user2 on a ft232 Feb 23 23:57:47 can just start a tty on it I think? Feb 24 00:06:57 like agetty? Feb 24 00:34:52 yea was just looking how startup does it but not sure now lol Feb 24 00:46:42 `/sbin/agetty --local-line 1200 ttyUSB0 vt100` _almost_ did the job on my desktop Feb 24 00:48:11 i was just trying similar Feb 24 00:48:38 now mine is stuck Feb 24 01:58:33 sudo systemctl start serial-getty@ttyUSB0 Feb 24 02:06:25 zmatt: how can I specify the baud rate? **** ENDING LOGGING AT Thu Feb 24 02:59:56 2022