**** BEGIN LOGGING AT Tue Apr 05 02:59:57 2022
Apr 05 03:08:52 <zmatt> what does cat /etc/debian_version say ?
Apr 05 03:14:08 <mattb0ne> damn never mind
Apr 05 03:14:14 <mattb0ne> rcn-ee
Apr 05 03:14:22 <mattb0ne> said I could make it a flasher
Apr 05 03:14:33 <mattb0ne> with that command let me reboot  with the sd card in there
Apr 05 03:14:47 <mattb0ne> I am using the bullseye monthly
Apr 05 03:16:47 <zmatt> be sure to enter that command while booted from sd card, and then boot from sd card again
Apr 05 03:18:35 <mattb0ne> could i mess it up by not booting from the SD card again
Apr 05 03:18:58 <mattb0ne> actually I booted and it looks like it is flashing
Apr 05 03:19:26 <zmatt> I mean, if you created a flasher sd card but didn't boot from that flasher sd card then obviously nothing would have happened yet
Apr 05 03:48:03 <mattb0ne> ok i am on bullseye
Apr 05 03:48:18 <mattb0ne> now if I am connecting to the board via usb
Apr 05 03:48:29 <mattb0ne> do I need to do anything on the bealge to share internet
Apr 05 03:48:47 <mattb0ne> getting network unreachalbe pining 8.8.8.8
Apr 05 03:48:52 <mattb0ne> unreachable*
Apr 05 03:50:12 <zmatt> internet sharing via usb is never something that just works by default, it always requires setup on both sides
Apr 05 03:50:56 <zmatt> the easy way to get a beaglebone internet is via ethernet/wifi (whichever applies)
Apr 05 03:51:56 <mattb0ne> yeah these new laptops do not have ports anymore
Apr 05 03:52:07 <mattb0ne> i got two thunderbolt ports and that is it
Apr 05 03:56:35 <zmatt> it looks like usb-c ethernet adapters are available for as little as $10 (for 100 Mbit, not gigabit, but that's fine for this purpose)
Apr 05 03:57:17 <mattb0ne> ok I will go get one o fthose
Apr 05 03:57:22 <mattb0ne> of those *
Apr 05 03:59:54 <zmatt> seems like a good idea, since that will work without touching any config on the beaglebone (only need to enable internet sharing on the PC to that interface), and it avoids having to meddle with the settings of the bbb's usb network interface (on both sides) and risk losing connection to it
Apr 05 04:01:02 <zmatt> is your PC running windows or linux?
Apr 05 04:03:09 <mattb0ne> windows
Apr 05 04:03:17 <mattb0ne> i have wsl2
Apr 05 04:03:22 <mattb0ne> seems to be ok
Apr 05 04:03:30 <mattb0ne>  so far
Apr 05 04:04:35 <mattb0ne> does it make sense to be able to ping 8.8.8.8 but have sudo update fail
Apr 05 04:05:22 <zmatt> depends on the failure.. if the problem is dns resolution then yes I see no problem with that
Apr 05 09:02:47 <set_> Hello, are there any updated C1/3 BBBs for sell anywhere?
Apr 05 21:03:52 <Guest30> Hi, I have a BBAI and I'd like to change the cpu frequency.  When I issue cpufreq-info, both cores report the "frequency should be within 400 MHz and 400 MHz."  But available frequencies listed go up to 1.5GHz.  Does anyone know how I can increase the cpu freq?  Do I need a kernel update?
Apr 05 21:04:29 <Guest30> oh also I tried changing the governor from userspace to ondemand to performance and had the same issue
**** ENDING LOGGING AT Wed Apr 06 02:59:57 2022