**** BEGIN LOGGING AT Thu Nov 03 02:59:56 2022
Nov 03 04:38:45 <Chad> I'm new to Beagle. Been using Pi4. The Pi4 GPU just isn't working for us to decode 4K video. Are there any options here?
**** BEGIN LOGGING AT Thu Nov 03 05:43:57 2022
Nov 03 14:56:34 <jfsimon1981> */msg nickserv identify jfsimon1981
Nov 03 14:57:16 <zmatt> fail
Nov 03 14:57:29 <jfsimon1981> yep failed to discover it publicly
Nov 03 14:58:20 <zmatt> also, you're using your nickname as password? :P
Nov 03 14:58:38 <jfsimon1981> no ?
Nov 03 14:59:04 <zmatt> ok good... so that command wouldn't have worked anyway
Nov 03 14:59:22 <jfsimon1981> i gen 1 you can check how they feel s3MtJb4QrEA3uLre
Nov 03 14:59:38 <zmatt> also, you may be interested in https://libera.chat/guides/sasl ... that avoids having to deal with nickserv manually
Nov 03 14:59:38 <jfsimon1981> Yep i copy past from console.
Nov 03 15:03:45 <jfsimon1981> All right thanks
Nov 03 15:04:09 <jfsimon1981> Setup properly
Nov 03 22:06:34 <NishanthMenon> zmatt: https://libera.irclog.whitequark.org/beagle/2022-08-17#32752727 -> https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/log/?h=08.05.00.002 your wish was done :D
Nov 03 22:06:35 <NishanthMenon> for next ai64 migration..
Nov 03 22:06:59 <NishanthMenon> rcn-ee: ^^ :D
Nov 03 22:09:25 <zmatt> haha nice
Nov 04 00:01:37 <set_> Hello...
Nov 04 00:01:58 <set_> Okay, okay, okay. So, does the ServoCape come w/ the inputs populated or not?
Nov 04 00:02:17 <zmatt> ?
Nov 04 00:02:40 <set_> There are 5v inputs on the ServoCape.
Nov 04 00:03:08 <set_> And signals at 3.3v PWM and a GNDs.
Nov 04 00:03:09 <zmatt> not really... what are you referring to?
Nov 04 00:03:16 <set_> The ServoCape!
Nov 04 00:03:50 <set_> I have signal in and mouser.com has a photo up of the signal inputs populated.
Nov 04 00:04:03 <zmatt> the inputs are not 5v, they're 3.3v
Nov 04 00:04:09 <set_> I think they need to change it on their site or allow for people to understand.
Nov 04 00:04:10 <set_> Oh?
Nov 04 00:04:20 <set_> It says 5v.
Nov 04 00:04:24 <zmatt> where?
Nov 04 00:04:32 <set_> On the ServoCape silkscreen.
Nov 04 00:04:46 <zmatt> the only thing 5v is the supply input (which just connects to the 5v output on the servo output headers)
Nov 04 00:05:15 <set_> Near the blue screw terminal, there is a silkscreen heading w/ the words Signal In.
Nov 04 00:05:42 <set_> Above that it shows the the signals, the gnds, and the 5v inputs.
Nov 04 00:05:58 <set_> @zmatt: Would you like a photo?
Nov 04 00:06:35 <set_> I notified mouser already but they are acting like what was once collective is indifferent now.
Nov 04 00:06:46 <set_> So, I am not trying to rip or gip the system here.
Nov 04 00:07:28 <zmatt> that 2-pin header labeled "5v" is a 5v output from the beaglebone, I have no idea why they visually grouped near the servo signal input headers
Nov 04 00:07:30 <set_> I am trying to figure out if Mouser has some rotten apples that are keeping the signal inputs to themselves and shafting me or if I do not get signal in populated at all.
Nov 04 00:07:38 <set_> Oh!
Nov 04 00:08:06 <set_> Oh.
Nov 04 00:08:10 <set_> Okay.
Nov 04 00:08:25 <set_> Hmm. Is that in the datasheet?
Nov 04 00:08:47 <set_> If this is an issue, I will drop it.
Nov 04 00:08:53 <zmatt> schematic
Nov 04 00:09:20 <set_> No concern but the fact remains, I already contacted mouser about the population again and again. Twice only actually.
Nov 04 00:09:24 <set_> Schematic!
Nov 04 00:09:29 <set_> Off to check it out.
Nov 04 00:09:59 <zmatt> X2
Nov 04 00:10:20 <set_> Wait!
Nov 04 00:10:34 <set_> Allied is even selling them for $22.00.
Nov 04 00:10:44 <set_> What is going on down in Cajunville?
Nov 04 00:10:53 <set_> I just spent $40.00 on it.
Nov 04 00:10:56 <set_> Blah.
Nov 04 00:11:07 <zmatt> both prices sound excessively expensive to me
Nov 04 00:11:40 <zmatt> considering how little there's on this thing
Nov 04 00:11:49 <set_> You or whomever is in charge of the ServoCape notifications I think should adjust photos of the input headers being populated if indeed they are not.
Nov 04 00:11:50 <set_> Right.
Nov 04 00:11:54 <set_> I understand.
Nov 04 00:12:20 <set_> Allied, Mouser, and now who knows who? You know?
Nov 04 00:12:26 <zmatt> I'm not in charge of anything whatsoever, I don't work for beagleboard.org
Nov 04 00:12:31 <set_> Me neither.
Nov 04 00:12:35 <set_> I am just reaching out.
Nov 04 00:13:00 <zmatt> if the product you received doesn't match the photo, you should probably notify the supplier from which you obtained the product
Nov 04 00:13:13 <set_> As usual, GHI may get upset. Either way, I will wait to understand more in time. Right...
Nov 04 00:13:16 <set_> That is what I thought.
Nov 04 00:13:33 <zmatt> (i.e. the distributor0
Nov 04 00:13:34 <set_> So, that is what I did. Again!
Nov 04 00:13:35 <zmatt> )
Nov 04 00:13:40 <set_> Right.
Nov 04 00:13:50 <set_> Okay.
Nov 04 00:13:55 <zmatt> anyway, zZ
Nov 04 00:13:58 <set_> No!
Nov 04 00:14:00 <set_> Wait...
Nov 04 00:14:04 <set_> Fine.
Nov 04 00:19:45 <set_> Anyway...sorry for stirring up trouble (as they call it).
Nov 04 00:28:35 <set_> @zmatt: Now, w/ your knowledge from reading the proper schematic that I cannot find right now, I have realized I have a 5v output on the ServoCape to go and use.
Nov 04 00:28:39 <set_> Thank you again!
Nov 04 02:24:33 <set_> bbblue and arducopter is back on the menu!
Nov 04 02:25:04 <set_> bear w/ me...
Nov 04 02:25:10 <set_> Okay, not tonight.
Nov 04 02:27:52 <set_> But soon!
**** ENDING LOGGING AT Fri Nov 04 02:59:56 2022