**** BEGIN LOGGING AT Mon Nov 02 02:59:56 2009
Nov 02 07:51:29 <ilidiam> how can i start a program build in c in the fonera 2.0n ?
Nov 02 08:01:52 <xMff> ./programm ?
Nov 02 08:03:07 <ilidiam> but i want add it in the starup of fonera
Nov 02 08:03:43 <xMff> https://forum.openwrt.org/viewtopic.php?id=11301
Nov 02 09:04:02 <Danicasti> Buongiorno!
Nov 02 13:21:39 <barbon> olà
Nov 02 13:41:02 <ruka_fon> hello
Nov 02 13:41:38 <ruka_fon> does any know of a issue with the 2.0n and external usb hub?
Nov 02 13:43:39 <blathijs> I've heard something about that before, someone had a hub that wasn't recognized. Switched it for another brand and it worked.
Nov 02 13:43:43 <blathijs> ruka_fon: What issue are you facing?
Nov 02 13:51:11 <ruka_fon> when i connect a huawei e220 to a usb 2.0 powered hub, it recognizes it, but it doesn't connect
Nov 02 13:51:34 <blathijs> Ah, different problem then
Nov 02 13:51:36 <ruka_fon> when i put the e220 directly thru the usb port on the router
Nov 02 13:51:43 <ruka_fon> it connects
Nov 02 13:52:00 <blathijs> Hmm, that's weird
Nov 02 13:52:02 <ruka_fon> i've seen it reported on the boards at fon
Nov 02 13:52:08 <blathijs> ruka_fon: What do you mean by "recognizes" ?
Nov 02 13:52:10 <OdyX> ruka_fon: is the hub externally powered (aka don't you have too much power-eating devices on it ?
Nov 02 13:52:29 <ruka_fon> it is expernally powered yes
Nov 02 13:52:52 <ruka_fon> the firmware detects the card
Nov 02 13:53:06 <ruka_fon> the hub with 2.0g worked
Nov 02 13:53:15 <ruka_fon> but with 2.0n no :(
Nov 02 13:54:06 <ruka_fon> the strange thing, the router 2.0n is always restarting when i connect the hub to the usb port
Nov 02 13:54:16 <ruka_fon> it looks like it
Nov 02 13:54:31 <blathijs> ruka_fon: Does the uptime display on the dashboard confirm that?
Nov 02 13:55:09 <ruka_fon> if i didn't want to connect a usb printer and a hdd, it would be fine to connect directly to the router, but i want to connect more
Nov 02 13:55:27 <ruka_fon> i'm not at home now, but i'll check it when i arrive
Nov 02 13:55:38 <ruka_fon> i'm not at home now, but i'll check it when i arrive, blathijs
Nov 02 13:56:28 <blathijs> ruka_fon: Stick around, perhaps one of the devs can help you debug it a bit
Nov 02 13:56:29 <ruka_fon> does anyone know of any issue with 3g card and usb hub?
Nov 02 13:56:41 <blathijs> I have no clue about how the 3G stuff is implemented, unfortunately
Nov 02 13:57:46 <ruka_fon> the only usb device that need power is the 3g card, the other ones, like the hp printer or the external hdd, don't need it.
Nov 02 13:58:10 <blathijs> ruka_fon: Did you try with just the hub and the 3G card?
Nov 02 13:58:20 <blathijs> ruka_fon: Also, do the other devices work with the hub?
Nov 02 13:58:45 <ruka_fon> i haven't tried connecting anything else
Nov 02 13:58:56 <ruka_fon> later i'll try it
Nov 02 13:59:02 <blathijs> k :-)
Nov 02 13:59:17 <ruka_fon> the hub with just the 3g card was what i was doing
Nov 02 13:59:45 <ruka_fon> i've even tryed disconnecting the power from the hub
Nov 02 14:00:48 <ruka_fon> blathijs: thank you for help.. I'll try the other devices to check if they work
Nov 02 14:01:02 <ruka_fon> bye all
Nov 02 15:10:59 <blathijs> pff, compiling the firmware takes long... Still compiling the toolchain :-)
Nov 02 20:28:47 <mtemmerm> Hi. I have a question - and hope I'm not out of line here - about Fonera firmware on other hardware than a fonera. I just purchased a Belkin F5D8235-4 wireless router and was looking around for replacement firmware. Does anyone know if it's been done before?
Nov 02 20:29:32 <mtemmerm> I didn't know about the existence of fonera until I started looking for alt firmwares, and tbh am a bit blown away by the presentation of it :)
Nov 02 20:31:46 <blathijs> mtemmerm: I think it's been done, not sure who or how :-)
Nov 02 20:32:18 <blathijs> mtemmerm: Essentially, the Fonera runs OpenWRT with a bunch of custom packages for configuration and interface
Nov 02 20:32:57 <mtemmerm> I found one or two forum entries but it's a bit of a mix between openwrt & ddwrt and I'm confused :D
Nov 02 20:33:23 <mtemmerm> afaik - if your firmware works on ralink 2880 bases soc it should be fine I guess
Nov 02 20:33:47 <blathijs> I think the 2.0n is just that (at least ralink, I think I saw 28xx somwhere as well)
Nov 02 20:33:49 <mtemmerm> another question: the printer server support (which looks awesome) is that based on CUPS?
Nov 02 20:34:00 <mtemmerm> has to be, right?
Nov 02 20:34:45 <mtemmerm> that's great news :) i can't search around too good now since i'm on company time
Nov 02 20:35:03 <blathijs> Dunno about the printer server
Nov 02 20:36:01 <mtemmerm> Well, will dl the sources and see how it goes when I get home I guess :) thanks already!
Nov 02 20:37:00 <mtemmerm> blathijs: are you dutch or flemish by any chance btw? :)
Nov 02 20:39:44 <blathijs> Yup, dutch
Nov 02 20:41:16 <mtemmerm> dacht al, bla / thijs
Nov 02 20:41:30 <mtemmerm> bedankt thijs ;) ik naar huis - avond ;)
Nov 02 20:41:38 * mtemmerm zuiderbuur ;)
Nov 02 20:54:56 <ruka_fon> hello
Nov 02 20:55:04 <ruka_fon> I'm back.
Nov 02 20:55:08 <ruka_fon> now from home
Nov 02 20:55:28 <ruka_fon> blathijs: i've tried the printer from the usb hub
Nov 02 20:55:34 <ruka_fon> and it works just fine
Nov 02 20:55:59 <ruka_fon> but when i connect the huawei e220 to the hub, it all goes down
Nov 02 20:56:45 <ruka_fon> tomorrow i'll get a new 3g modem to check if it works better
Nov 02 20:56:58 <ruka_fon> anyone there?
Nov 02 20:59:35 <blathijs> ruka_fon: Different type, or just another one?
Nov 02 21:08:50 <ruka_fon> different type
Nov 02 21:09:09 <ruka_fon> well, just to keep u informed
Nov 02 21:09:15 <ruka_fon> bye all
**** ENDING LOGGING AT Tue Nov 03 02:59:57 2009