**** BEGIN LOGGING AT Wed Aug 29 03:00:03 2018 Aug 29 09:53:52 got sms and data over sim to work now. not quite sure how, though ;-). Aug 29 09:55:19 thats good news, but would have been nice to know what to tweak on the wiki to help other folks stuck in the same way Aug 29 09:55:48 can make phone calls, too, but audio doesn't work. Aug 29 09:56:19 I think I removed the sim-lock within android and after rebooting this worked. Aug 29 09:56:31 yea see the TP3 planning page, needs someone with a free call plan to figure out the tweaks needed Aug 29 09:56:45 but might as well have been due to the changes we discussed that just needed a reboot to take effect. Aug 29 09:57:38 chould be a matter of changing in/out audio stuff in pauvcontrol Aug 29 09:58:05 audio in general works fine Aug 29 09:58:14 I mean within calls Aug 29 09:58:20 ok. Aug 29 09:59:32 pavconv hasn't changed much after joining a call. Aug 29 09:59:56 speaker in the UI is crossed out, too and can't be tapped. Aug 29 10:00:18 mic can be toggled, but I don't think it has an efect. can't hear things on the other end. Aug 29 10:00:40 I'd suspect youd want to change the input/output devices from the dropdowns? Aug 29 10:02:16 on the config setting there is - profile - call mode? Aug 29 10:03:05 config of what? the call-app? Aug 29 10:03:31 in volume control you've got: playback, recording, out/in, configuration Aug 29 10:03:42 not sure if I se profiles in pulse avc Aug 29 10:03:49 under configuration there is droid_card.primary - profile: Aug 29 10:03:56 yes Aug 29 10:04:13 ah. right. Aug 29 10:05:14 ok. now I can toggle the sound in the ui. but I dnt think there's an effect. Aug 29 10:05:22 dial-tones dnt work either. Aug 29 10:06:26 so after picking that profile, you've gone to input devices and picked say 'input from voice call'? Aug 29 10:07:42 ok. Aug 29 10:09:30 hm. pulse avs keeps crashing, when I fiddle with inputs/outputs after selecting the "call mode"-profile. Aug 29 10:10:43 s/avs/avc/ Aug 29 10:11:59 thats got to be annoying, yea your the first to find these bugs, check logs or run in gdb etc Aug 29 10:14:03 I picked output to speaker and then called my number and actually got the dialing tones from the network as it was ringing Aug 29 10:14:35 Though when I hungup it swapped back to Parking port whatever that is Aug 29 10:14:58 from the command line pavucontrol-qt is more stable. Aug 29 10:15:16 sais it's missing liblwparser.so at startup (but starts). Aug 29 10:15:45 when I make inputs it tries to connect to pulseaudio, fails and resets to what was there previously. Aug 29 10:16:50 I've been using the 'LXQT menu->Sound&Video->PulseAudio Volume Control' suspect that is your -qt one Aug 29 10:17:19 yes. that's the one that crashes, when I order changes. Aug 29 10:17:26 It dosnt seem to reset like your getting though, well only the once on hangup Aug 29 10:17:35 `pavucontrol-qt` from the command line looks the same but is a bit more stable Aug 29 10:20:07 "missing liblwparser.so" is annoying error in MediaTek blobs which doesn't affect operation Aug 29 10:20:21 hm. guess I got the commandline-one to segfault as well, now ;-). Aug 29 10:21:19 are you on stretch or buster? Aug 29 10:21:30 stretch, I think Aug 29 10:21:38 adam_b, I think stretch has UBPorts ofono with broken incoming calls? Aug 29 10:21:52 NeKit: no I backported so we are all the same Aug 29 10:22:25 there is still nothing to notice for incomming calls though Aug 29 10:22:33 yes. it's 'stretch main contrib non-free' Aug 29 10:22:53 tobra: its the gemian bits that we change Aug 29 10:23:38 that's 'stretch main' as well. Aug 29 10:23:40 ahh I see you were just answering the stretch/buster question Aug 29 10:23:48 yes ;-). Aug 29 10:24:05 incomming calls work fine for me, though. Aug 29 10:24:23 you can answer them? Aug 29 10:24:36 the notification part I mean. there's still no audio. Aug 29 10:25:44 I think I did that earlier. lemme check again Aug 29 10:27:21 y. "works". Aug 29 10:27:36 except for the audio, that is. Aug 29 10:27:46 yea I just tried it, and yea it popps up, thats new Aug 29 10:29:09 maybe I should also `apt update/upgrade`. Aug 29 10:30:50 so I just tried setting config - call mode, then in from call and out to speaker, and then found that it auto answered the call after two rings and I could year my self, then made a click and it got into a feedback loop of crazyness Aug 29 10:31:29 so yea we just need to get that change the profile to happen automatically on calls etc Aug 29 10:32:04 ok ;-) Aug 29 10:32:19 and figure out why yours is crashing when setting that Aug 29 10:32:52 y. "segfault" isn't really a telling error. Aug 29 10:33:11 no but you run within gdb and it should tell you whereabouts Aug 29 10:33:19 maybe something simple like rebooting and checking again tonight does the trick already. Aug 29 10:33:33 (would still be nice to know what happens on my device though) Aug 29 10:33:52 y. could do that. Aug 29 10:50:57 if I quit pavucontrol-qt (in a controlled way) between setting the input and the output, it accepts the settings, they seem persistent and things dnt crash. Aug 29 10:51:55 ok. and audio seems to "work" then. Aug 29 10:52:25 (I got the same crazy clicking/interferrence though that you had as well probably) Aug 29 10:53:19 tobra: mine was expected as I had the two phones close enough so that there was feeback from one to the other, fixed by taking the handsets appart Aug 29 10:53:41 might have been my problem, too Aug 29 10:55:34 after the call the profile is back to "default profile" though. Aug 29 10:56:16 yea I had that too, does it swap back to the call profile when you make another call? ie does it remember the call mode settings or not? Aug 29 10:57:00 nope. Aug 29 10:57:22 should probably look at ubpors/sfos and see how they handle it Aug 29 11:11:25 after closing it only just now, I also noticed that I got a purple LED on the back out of whatever I did ;-). Aug 29 11:12:31 tobra: the leds mix, so its red-celluar, green-wifi, blue-bt, handy to let you know whats still on when especially when wifi eats battery like crazy Aug 29 11:17:42 ok. I think that's new as well and came with `apt update`? bc before I hadn't noticed. Aug 29 12:19:17 Jasu_M, does mainline survive kexec? Aug 29 12:52:59 NeKit: yeah :) Aug 29 12:54:06 I patch the DTB with the memory and reserved-memory sections provided by the loader though Aug 29 12:54:08 https://github.com/Jasu/gemini-pda-buildroot/commit/9e1cc9dc2382af0920756fe984fc9042a588674f#diff-48ff3d67779f3fb5a7a732b066471208R17 Aug 29 12:55:07 of course I could have just used the currently running DTB :P Aug 29 12:55:21 once reboot is working, you could actually use fastboot, but xflash is a bit unstable Aug 29 12:55:29 (fastboot boot feature I mean) Aug 29 12:55:52 does it work? I looked at the boot loader source, and it doesn't seem to really support it Aug 29 12:56:40 lk supports it, but current build provides no way to boot into this mode without xflash Aug 29 12:58:41 then I'd have to swap the UART cable to a USB cable which would be a hassle Aug 29 13:00:06 ah, yes, I forgot I had UART soldered to pins when I tried Aug 29 23:25:41 hi, how do you guys do an ALT? Aug 29 23:26:04 the bar keeps appearing Aug 30 00:29:12 A mate of mine fired up Vim. Couldn’t get out of edit mode. How do you type “Esc”? Aug 30 00:31:05 (in debian) **** ENDING LOGGING AT Thu Aug 30 02:25:42 2018