**** BEGIN LOGGING AT Sat Oct 18 02:59:57 2008 Oct 18 08:27:39 gm :) Oct 18 08:28:03 PullUp on suspend on Treo680 is not good idea :b Oct 18 08:28:20 good morning Oct 18 08:28:38 I read that the Treo does support USB host ... someone connected a keyboard to it. Oct 18 08:28:49 BobOfDoom did Oct 18 08:28:57 I had only mouse and flash :b Oct 18 08:29:04 flash = memory? Oct 18 08:29:19 usb flash pen Oct 18 08:29:30 and Linux did recognize it? Oct 18 08:29:50 yes Oct 18 08:29:51 Yes, I think, my (new :) ) MDA Vario IV (HTC Touch Pro) also has USB host... the bootloader supports it, Windows doesn't. Oct 18 08:30:01 :D Oct 18 08:30:06 And it also needs external power ... Oct 18 08:30:34 Or are there ways that the smartphone can provide power on USB? Oct 18 08:31:29 I discussed it with friend and 3.3V from serial port power can be changed into 5v Oct 18 08:31:33 alegra: there are ways (there's a contraption called a charge pump that convert from the phones low 3.7V to 5V) but not without some hardware work Oct 18 08:31:57 so only MUC-guts-USB Oct 18 08:32:06 palm devices have a 3.7V pin on the connector for powering external stuff Oct 18 08:32:35 right, they need 5V ... I forgot that. Oct 18 08:32:57 Someone told me that a Treo / Zire / ... might be damaged if you connect a USB device to it (which needs power). Oct 18 08:33:32 well I've tried it.. and .. nothing hapepns :p Oct 18 08:34:11 I don't think it can damage the hardware, unless you do something really strange Oct 18 08:34:52 Sleep_Walker: USB pullup on in suspend? yeah.. that's gonna drain the battery Oct 18 08:35:31 well.. it might be bad to draw too much power, but you'd have to make up a special cable to get any power out of it anyway Oct 18 08:35:58 you can get USB hubs with batteries Oct 18 08:36:09 that's probably the safest and easiest method Oct 18 08:40:37 I think I have an old USB hub with a power supply. Oct 18 08:47:52 BobOfDoom: I'm talking about USB pullup because of BT Oct 18 08:48:00 pullup affects also that Oct 18 08:48:18 and I wouldn't wake up on BT event Oct 18 08:48:29 simply because it's gone :) Oct 18 09:21:51 ahd Oct 18 09:21:58 ah* Oct 18 09:22:00 k Oct 18 09:26:34 BobOfDoom: what about adding 0,1,2,3 into gpiotrace2html for indication of afn change? Oct 18 09:26:43 or is it done somehow else? Oct 18 09:27:34 I just detected GPIO AFN change :( Oct 18 09:29:01 fields in table are empty for now... Oct 18 09:29:21 oh Oct 18 09:29:30 can you post the GPIOs.txt? Oct 18 09:29:42 I tried to make gpios2html notice it, but I didn't test it Oct 18 09:29:55 oh, I see Oct 18 09:38:55 BobOfDoom: for example this one http://sleepwalker.hackndev.com/GPIO/GPIO-tel2.txt Oct 18 09:41:06 sorry, there is also some mess added Oct 18 09:41:16 my parser gets it correctly Oct 18 09:42:13 sed -i 's/^CS2REGS[^|]*||//' GPIO-tel2.txt Oct 18 09:42:17 this should fix it Oct 18 11:00:49 chm :/ Oct 18 11:01:25 flash is detected correctly, but cannot be mount :( Oct 18 11:56:41 I've got plenty of different AFNs set in Linux... Oct 18 12:03:36 hmmm, how so, that keyboard in linux use different AFN than PalmOS? is it because that doesn Oct 18 12:03:48 doesn't matter? Oct 18 12:04:06 hmmm, it does matter :O Oct 18 12:04:35 so - I've got bad dump or gpiotrace2html writes af0 even if AFN differs... Oct 18 12:06:19 err Oct 18 12:06:35 AFN dumping was wrong and I fixed it Oct 18 12:06:39 not sure if you updated? Oct 18 12:06:44 maybe it's still wrong Oct 18 12:06:51 I haven't updated Oct 18 12:07:28 BobOfDoom: http://git.hackndev.com/?p=tools;a=summary Oct 18 12:07:32 no update here.. Oct 18 12:07:44 have you forgot to push? :) Oct 18 12:18:23 damn Oct 18 12:20:31 all GPIOs which differs in high/low with PalmOS are just IN :( Oct 18 12:23:04 http://git.hackndev.com/?p=tools;a=commitdiff;h=4b4581c92721c343be696927a7475b98097030f2 Oct 18 12:25:07 ah, this fix Oct 18 12:25:29 BobOfDoom: I thought there is problem in gpiotrace2html Oct 18 12:25:50 hmm, I'd rather redump that Oct 18 12:27:00 Sleep_Walker: oh there's a problem in gpiotrace2html? Oct 18 12:27:03 could be as well Oct 18 12:27:14 give me a moment, pls Oct 18 12:29:19 my mistake Oct 18 12:29:43 problem is, that I build PRCs on different machine :/ Oct 18 12:45:54 orright, I'm off, gn Oct 18 12:46:19 gn Oct 18 13:42:52 gn Oct 18 13:46:34 a bit late I think :b Oct 18 14:22:12 ok, finally flash mounted :) Oct 18 14:22:20 I didn't have SCSI support for that Oct 18 14:44:02 hello, can somebody help me with debian on my palm treo 650 ? Oct 18 14:44:33 Dare_devil^: shoot Oct 18 14:45:01 Sleep_Walker: ? :) Oct 18 14:45:08 poloz otazku Oct 18 14:45:14 ako? Oct 18 14:45:30 kdyz nekdo bude vedet, poradi, cekat na svoleni se ptat tu nema smysl Oct 18 14:45:42 aha, ok, thx Oct 18 14:49:21 I tried a debian on my treo 650 by this tut http://hackndev.com/node/195 , but it freezed when i pushed "Boot!" button.. I tried P3T3's zImage and initrd.gz , it boot me into init but i get error: ls: /media/hdd/gpe*: No such file or directory; failed! ; could not mount root fs: init failed! please reset, check you configuration and retry.. i have 3 partitions on my memory card, 1 - fat16 , 2 - ext2 , 3 - swap .. i untared rootfs on s Oct 18 14:49:22 .. where is problem? Oct 18 15:01:17 wtf? Oct 18 15:01:19 :1097:2: warning: #warning syscall fadvise64 not implemented Oct 18 15:01:21 :1265:2: warning: #warning syscall migrate_pages not implemented Oct 18 15:01:23 :1321:2: warning: #warning syscall pselect6 not implemented Oct 18 15:01:24 :1325:2: warning: #warning syscall ppoll not implemented Oct 18 15:01:25 :1365:2: warning: #warning syscall epoll_pwait not implemented Oct 18 15:01:42 are some GCC version needs for 2.6.27? Oct 18 15:21:22 got it :b Oct 18 16:09:19 Hello, can somebody help me? I tried a debian on my treo 650 by this tut http://hackndev.com/node/195 , but it freezed when i pushed "Boot!" button.. I tried P3T3's zImage and initrd.gz , it boot me into init but i get error: ls: /media/hdd/gpe*: No such file or directory; failed! ; could not mount root fs: init failed! please reset, check you configuration and retry.. i have 3 partitions on my memory card, 1 - fat16 , 2 - ext2 , 3 - Oct 18 16:09:19 st i saved initd.gz and zImage .. where is problem? Oct 18 16:15:15 bbl Oct 18 16:22:45 Sleep_Walker: mam zalozit novu diskusiu alebo mam pridat komentar do uz vzniknutej? Oct 18 19:56:54 hey Oct 18 19:57:11 anything I can do to improve whatever the linux desktop is now for palm t5/tx Oct 18 19:57:14 in terms of speed etc Oct 18 19:57:21 the sd gets maxed out by 1 app badly Oct 18 19:57:31 dunno if it that's my particular flash chip or what Oct 18 19:57:41 also is the 256 meg diskonchip supported yet Oct 18 21:02:28 anyone know if I can boot a Zire 71 using a disk image file rather than an ext2 partiton? Oct 18 22:40:27 hi Oct 18 22:41:17 BobOfDoom: does LCD display work for you on Treo650 with 2.6.27rc2? Oct 18 22:43:06 could you update treo650 defconfig or send me treo650 config other way? Oct 19 00:14:18 rc2? Oct 19 00:14:24 it works in 2.6.27 final Oct 19 00:15:41 Sleep_Walker: defconfig is here: http://git.hackndev.com/?p=linux-2.6;a=blob;f=arch/arm/configs/palmt650_defconfig;h=37aa15a97020a1c98918d9272af51af8acc95844;hb=stable Oct 19 00:16:05 oh you mean in the playpen.. Oct 19 00:16:13 hmmm I should update that Oct 19 00:17:12 but yeah it did work **** ENDING LOGGING AT Sun Oct 19 02:59:56 2008