**** BEGIN LOGGING AT Tue Oct 21 02:59:57 2008 Oct 21 12:31:08 * Sleep_Walker wasn't able to leave MUX mode yet Oct 21 12:31:10 probably Oct 21 12:31:20 I've got OK only for AT Oct 21 12:43:41 setl 79 && setl && setl 87 40 39 34 && seth 87 40 39 34 && set2 41 && set1 34 && seti 35 34 14 Oct 21 12:52:28 BobOfDoom: this link http://www.sonyericsson.com/downloads/GC7X_GC8X_GSG_AT_Command_R2A_EN.pdf on hh.org wiki is not available... Oct 21 12:59:23 Sleep_Walker: hmm.. I got 680.. and I broke it within 15 minutes of opening the box XD Oct 21 12:59:27 that's gotta be a record Oct 21 12:59:32 :D Oct 21 12:59:52 Sleep_Walker: try: AT+CFUN=1 Oct 21 13:00:06 that should power it up and let you use other commands Oct 21 13:00:43 BobOfDoom: you shouldn't open box with 680 by using shovel Oct 21 13:00:52 and if yes, not for 15 minutes Oct 21 13:01:05 Sleep_Walker: my 680 resets whenever Palm OS is idle... so if I hold down some key, or plug in and out the SD constantly, I can keep it alive long enough to start pTunes playing something, and then it's ok Oct 21 13:01:23 I think it resets on switching power modes (I think Palm OS puts CPU into idle mode) Oct 21 13:01:24 what about reflash? Oct 21 13:01:30 suspend makes it reset too Oct 21 13:01:39 what ROM version you have? Oct 21 13:01:57 I dunno.. it was working fine, then I opened it up to read the chips Oct 21 13:02:03 I still have answer from GSM only sometimes :( Oct 21 13:02:09 amg :FD Oct 21 13:02:23 definitely no ASIC, all chips are accounted for btw, top-left one was RF GSM thingy Oct 21 13:02:43 reclaim? Oct 21 13:02:47 and camera is just labelled with "06020" which is not very helpful Oct 21 13:02:56 06020? Oct 21 13:03:00 that IS something Oct 21 13:03:17 yeah.. it's written on the flex cable that the camera module is attached to though Oct 21 13:03:26 the module itself has nothing wrrite non it Oct 21 13:04:07 my guess, is I've either cracked a weak solder somewhere while taking the PCB out, or killed something with static electricity Oct 21 13:04:44 hopefully I can workaround it in linux, it might just be the power manager chip or something that's going flakey in suspend Oct 21 13:04:58 oh yeah, power manager chip is MAX8688 Oct 21 13:05:03 oh Oct 21 13:05:15 and the WM9712.. is labelled WM1613G Oct 21 13:05:19 which is kind of weird Oct 21 13:05:40 I foudn some references to WM9172 in the 650 being labelled that in certain revision too Oct 21 13:05:41 :D Oct 21 13:07:38 btw. best results with GSM_HOST_WAKE 10 and GSM_WAKE 40 Oct 21 13:07:56 but I don't know any for sure Oct 21 13:08:27 ah Oct 21 13:08:39 well once you can do AT+CFUN=1 you can check GSM_WAKE Oct 21 13:08:45 well Oct 21 13:08:55 assuming it works the same way Oct 21 13:09:00 USB might different Oct 21 13:09:36 in the 650 after doing AT+CFUN=1 the chip will stop responding after a while, cause it goes to sleep Oct 21 13:09:43 so you have to wake it up by toggling GSM_WAKE Oct 21 13:11:25 * BobOfDoom is hurredly writing distributed filesystem... due in < 9 hours Oct 21 13:46:09 we're going to karts as team building :b Oct 21 13:46:20 I'll try it on the way Oct 21 13:47:38 :D Oct 21 13:47:44 damnit Oct 21 13:47:50 my work sucks for team building :p Oct 21 21:42:09 PPC 6700 with WM6 Oct 21 21:42:16 It needs linux Oct 21 21:42:22 seriously. Oct 21 21:42:31 like, dual-boot Oct 21 21:43:33 but whens wm6.1 gonna be released for the 6700? Oct 21 21:43:55 #handhelds or #htc-linux is more appropriate channel for this Oct 21 21:44:21 ah right ... disconnect the same minute you join ... fuck Oct 21 21:50:39 very serious need of linux Oct 21 21:52:51 Yes. Seriously. **** ENDING LOGGING AT Wed Oct 22 02:59:57 2008