**** BEGIN LOGGING AT Sun Jan 23 02:59:57 2011 Jan 23 14:21:25 Marex: got my arm-gcc running. michael from the linara team did a great job - do most neccessary hint was that i need a bare-metal one for the kernel Jan 23 15:50:33 macgyver_alt: cool, enjoy your kernel Jan 23 15:53:22 Marex: dont get the mmcblk support working - from where did you boot - sd card? Jan 23 16:00:23 yes Jan 23 16:00:35 what do you mean by "dont get the mmcblk support working" ? Jan 23 16:41:27 Marex: dont get the rootfs load - rootfs is ext2 on a sd partition - ext2 was compiled in Jan 23 17:49:30 Marex: no filesystem could mount root: ext2, .... (rootfs is ext2 of course) Jan 23 19:38:44 macgyver_alt: is mmcblk0 detected at all ? if not, try rootdelay=5 (or something ... the number is # of seconds to wait for card to get recognised) kernel parameter Jan 23 19:40:33 no mmcblk at all Jan 23 19:44:35 use rootdelay then Jan 23 19:46:37 gonna try Jan 23 19:59:11 tried everything - basis is your config - turned ext2 on - ok will gve crocoboot the paramter ... Jan 23 20:16:54 macgyver_alt: you can compile the parameters into kernel if you suspected cocoboot that it doesn't pass them correctly Jan 23 20:22:55 whre to Jan 23 20:38:34 make ARCH=arm CROSS_COMPILE=... menuconfig Jan 23 20:38:43 kernel config -> boot params .. and force boot params Jan 23 20:41:32 of course i did Jan 23 20:41:41 macgyver_alt: so ... any change ? Jan 23 20:42:33 ok i'll see Jan 23 20:43:34 I believe rootdelay will make the trick Jan 23 20:43:44 it's a common case Jan 23 20:44:09 althoug a expensive good card Jan 23 20:45:35 it's a slow controller ... that's the poitn Jan 23 20:45:38 *point Jan 23 20:45:58 or rather ... it checks for the card every now and then ... and it's not all the time Jan 23 20:47:12 i see **** ENDING LOGGING AT Mon Jan 24 02:59:58 2011