**** BEGIN LOGGING AT Fri Jan 05 03:00:02 2018 Jan 05 04:40:12 soooo any luck with getting Halium on the OP5? is there somewhere I can watch progress? I don't think y'all want me messing up what might already be done by making assumptions... Jan 05 04:41:21 I believe @xreactx managed to make progress with sailfish port and the fixes used there can be re-used with halium als... Jan 05 04:41:51 bshah: yeah, he has, been following the thread I originally made that he posted on over on XDA. XD Jan 05 04:42:20 he took over where I would have gotten in over my head with Jan 05 04:42:40 suffice it to say my ambitions far outmatched my capabilities Jan 05 04:42:58 I hit a roadblock... Can't figure out how to get Wlan working on the OP5 for SFOS Jan 05 04:44:45 xreactx, I'd help if I knew what the heck I'd be doing, you got much further than I would have in that short of time Jan 05 04:51:02 xreactx, wonder if Marius might be able to help ya, and you him Jan 05 04:51:22 being as both of you are working on the same device, though he's likely working on other devices as well Jan 05 05:43:57 @bhushanshah hi can you add device titan to fixup-mountpoints … device moto g 2014 … "titan") … sed -i … -e 's block/bootdevice/by-name/modem mmcblk0p1 ' … -e 's block/bootdevice/by-name/system mmcblk0p36 ' … -e 's block/bootdevice/by-name/userdata mmcblk0p38 ' … -e 's block/bootdevice/by-name/recovery mmcblk0p32 ' … -e 's block/bootdevice/by-name/cache mmcblk0p35 ' … -e 's block/bootdevice/by-name/boot mmcblk0p31 ' … "$@" … ;; Jan 05 05:48:46 best if you open a PR against e.g. https://github.com/halium/hybris-bot Jan 05 05:48:49 err Jan 05 05:48:58 https://github.com/halium/hybris-boot Jan 05 06:00:40 https://github.com/mer-hybris/hybris-boot/pull/126 Jan 05 06:01:17 umm mer-hybris/hybris-boot is not used by halium Jan 05 06:01:23 looks like you made a PR to wrong remote? Jan 05 06:01:50 oh yes Jan 05 06:13:41 https://github.com/Halium/hybris-boot/pull/30 Jan 05 06:59:59 i see in main.mk new lib added "halium/droidmedia" what this should do ? and is it needed ? Jan 05 07:03:41 (Photo, 960x1280) https://irc.ubports.com/CszhJIRd/file_3560.jpg ? Jan 05 07:09:56 i think fixup-mountpoints is wrong Jan 05 07:44:12 Anthony Tonio was added by: Anthony Tonio Jan 05 07:44:22 Hi! Jan 05 07:44:54 @Anthony Tonio, Welcome! Jan 05 07:45:01 very nice project ;) Jan 05 07:45:21 I got a Nexus 5 Jan 05 07:52:01 @UniversalSuperBox bro need your help with this specifc error Jan 05 07:52:02 https://paste.ubuntu.com/26324230/ Jan 05 08:01:36 or anyone Jan 05 08:21:54 TCEYHAN was added by: TCEYHAN Jan 05 08:23:55 @SALPHA8506, ur mount point wrong Jan 05 08:54:16 @Mr_Doge, never mind fixed it.... Jan 05 11:55:08 @bhushanshah how much time does it take for systemctl status to start or become active? Jan 05 11:55:44 it may or may not become active Jan 05 11:57:04 @bhushanshah, https://pastebin.com/LaGcug7i Jan 05 11:57:17 Is it fine? Jan 05 12:00:13 I think Jan 05 12:01:09 @bhushanshah, I still can't see that spiral though on running either EGL_PLATFORM=hwcomposer test_hwcomposer or test_hwcomposer Jan 05 12:01:25 logcat please Jan 05 12:05:08 @bhushanshah, https://pastebin.com/XGQMKQkv Jan 05 12:06:51 hmm useless thins Jan 05 12:09:56 @bhushanshah, Want more? Jan 05 12:10:26 not really, it will be same crap Jan 05 12:10:50 @bhushanshah, What to do then? Jan 05 12:11:03 strace test_hwcomposer Jan 05 12:11:07 root@localhost:~# test_hwcomposer … width: 720 height: 1280 … library "/vendor/lib/egl/libGLESv2S3D_adreno.so" not found … OpenGL ES 2.0 (OpenGL ES 3.0 V@145.0 AU@ (GIT@I38fdb1353f)) … stop Jan 05 12:11:14 @bhushanshah, OK Jan 05 12:11:47 Also Jan 05 12:11:55 test_hwcomposer alone will never wokr Jan 05 12:12:02 always export EGL_PLATFORM Jan 05 12:12:33 Ah! It also returned same messgae. Jan 05 12:12:53 I actually used that one first. Jan 05 12:13:30 @bhushanshah, strace EGL_PLATFORM=hwcomposer test_hwcomposer ? Jan 05 12:14:05 yep Jan 05 12:18:27 @bhushanshah, https://pastebin.com/STKW6bmd Jan 05 13:21:53 @TheImpulson, is device caf ? Jan 05 13:24:11 @Mr_Doge, Yes Jan 05 13:24:27 @TheImpulson, tried adding bhushans repo ? Jan 05 13:25:24 https://paste.ubuntu.com/26325611/ @UniversalSuperBox rescue me,,, solved many .. last two errors Jan 05 13:26:22 @Mr_Doge, The one you gave me last time? Jan 05 13:26:32 @TheImpulson, yes Jan 05 13:26:45 @Mr_Doge, Yes. I already did that part. Jan 05 13:28:26 @Mr_Doge, fstab error? … mountpoints goods? Jan 05 13:29:11 That's the second time you've pinged me in an hour Jan 05 13:29:31 @UniversalSuperBox, And? XDD … Its problem? :O Jan 05 13:29:49 @petya230, these are different dude Jan 05 13:30:13 @Mr_Doge, fstab = partitions = mountpoints Jan 05 13:30:42 @petya230, 🤦‍♂️🤦‍♂️🤦‍♂️ dude Jan 05 13:30:50 ? Jan 05 13:31:35 @TheImpulson, @vanyasem Jan 05 13:31:36 I just want to help... :( Jan 05 13:31:43 @petya230, you anit getting what i am talikng about . right ? Jan 05 13:32:01 @Mr_Doge, Om, nope Jan 05 13:32:14 thats why.. Jan 05 13:32:44 @Mr_Doge, What did you enabled? Jan 05 13:33:09 @TheImpulson, nothing.. just uport stuff Jan 05 13:33:30 Okay, well. You can disable sdcardfs Jan 05 13:33:39 No one uses that Jan 05 13:34:15 @UniversalSuperBox could it be that android boot mode = charger is also set when I boot via fastboot? Jan 05 13:34:24 @anpok, Nope Jan 05 13:34:33 had the device plugged to the charger last night.. Jan 05 13:35:07 And, @Mr_Doge, your second error is fixed by the kernel I linked you to yesterday: https://github.com/snapcore/sample-kernels/commit/f94b2e67d3a4711dc9e110b2af64f757cc6a1d6d Jan 05 13:35:18 @UniversalSuperBox, wouldnt that disable the sdcard functionality ? Jan 05 13:35:23 No Jan 05 13:35:41 It'd disable sdcardfs, the filesystem Jan 05 13:37:14 @UniversalSuperBox, Okay Guys, I've mentioned this earlier but here we go again, can we a) stop pinging people for every issue? b) keep patience when your question gets no answer? … This is common internet equiette and would be nice if everyone can follow that.. Jan 05 13:37:48 I mean it's fine to ask for help, but this is not 24x7 help desk where you can expect instant help Jan 05 13:38:17 People have jobs, school, or other personal matters to take care as well Jan 05 13:38:32 This is so stupid to ping people every 5 minutes Jan 05 13:48:48 @bhushanshah, We dont ping every 5 minute :l Jan 05 13:48:55 But I see Jan 05 13:49:06 Its problem for this Jan 05 13:49:08 Group Jan 05 13:49:23 Have fun Jan 05 13:49:59 We can help if we have time and gaze in Jan 05 13:53:28 But if we just watch this channel for errors all the time, we won't get anything done Jan 05 14:26:35 BTW can I get access to Halium organization to push my trees? or am I supposed to do that? Jan 05 14:27:41 @TheImpulson, I recommend fork & make PRs Jan 05 14:27:59 You can push it to your GitHub Account and we can move it to the halium organization when your stuff works Jan 05 14:28:07 @Flohack, My tree is not there yet. Someone need to add my tree there. Jan 05 14:28:20 My tree is already on my github. Jan 05 14:28:41 @TheImpulson, Then @bhushanshah should fork it :) Jan 05 14:29:39 LNJ just moved his repo to my account so I could move it to the halium org. That works instead of forking, but takes longer Jan 05 14:55:53 Don't see anything as uevent Jan 05 14:55:54 (Photo, 567x181) https://irc.ubports.com/Le7xmv0y/file_3566.jpg Jan 05 14:56:10 What should I do about adding udev Jan 05 14:56:11 well sure Jan 05 14:56:14 for starters.. Jan 05 14:56:28 do you see /system is mounted? Jan 05 14:56:58 No ;_; Jan 05 14:57:08 Failed to mount system.img Jan 05 14:57:14 does /data/system.img exist? Jan 05 15:04:04 @bhushanshah, It is present … Sorry .. I will ask tommorow .. Something came up Jan 05 15:08:24 @bhushanshah, did you saw my log? if you are free. Jan 05 15:09:14 I did Jan 05 15:09:20 unfortunately it's all same Jan 05 15:09:38 Can you run logcat and capture log when you run test_hwcomposer? Jan 05 15:10:02 (use `grep -v` to filter out some of repeating crap like netlinklistner thing) Jan 05 16:37:49 @bhushanshah, This time the log was with it. Jan 05 16:49:02 last few errors with kernel 3.10 https://paste.ubuntu.com/26326604/ Jan 05 18:18:03 Hallo, can somebody help me with a error in the capability header file of the kernel? Jan 05 18:18:17 post error first Jan 05 18:18:20 to pastebin Jan 05 18:18:27 then ask if someone can help Jan 05 18:20:40 Thanks for the answer … here is my log file, … if have the same file in a bacon build, where it works fine … https://pastebin.ubuntu.com/26327193/ Jan 05 18:21:28 @BlueKenny, device? Jan 05 18:22:02 @TheImpulson, natrium Jan 05 18:22:05 it is for a Xiami Mi5s Plus / Natrium Jan 05 18:22:36 👍🏻 Jan 05 18:23:11 The file capability.h looks fine … https://pastebin.ubuntu.com/26314840/ Jan 05 18:23:20 @BlueKenny, Not error related but you seem to have some duplicate entries. Jan 05 18:26:31 Thanks i check this :) … i think that this defined "struct" is missing some other definitions da are in other file in my bacon tree, so it works there but not here ? Jan 05 18:28:03 @JBBgameich Can i use your tool in raspberry? Because i've seen that sig2img and qemu-something-arm aren't available for raspberry Jan 05 18:28:35 @BlueKenny, Can I see the source? Jan 05 18:29:49 @TheImpulson, Wich file can I give you? Jan 05 18:30:26 @BlueKenny, Gimme the link of whole kernel source. Jan 05 18:33:00 @Mattia, qemu-arm-static is not needed on the pi, so you'd have to remove all references too it Jan 05 18:33:52 and yeah, looks like simg2img doesn't build on arm ... so probably you can't use it on the pi unless you find a simg2img build for it Jan 05 18:39:07 @vanyasem, need your help with this Jan 05 18:39:13 ok Jan 05 18:39:14 listening Jan 05 18:39:44 how does it work ? or what i have to do? Jan 05 18:40:34 you need to view your cmdline for ubports-boot.img … `abootimg -i /path/to/boot.img` Jan 05 18:40:41 note the data path Jan 05 18:40:45 it will be invalid Jan 05 18:41:00 you change it and apply the changes with `abootimg -u /path/to/boot.img "cmdline=editedcmdline"` Jan 05 18:41:15 then you verify that it's correct now by running `abootimg -i /path/to/boot.img` again Jan 05 18:41:50 cmdline = console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 sched_enable_hmp=1 phy-msm-usb.floated_charger_enable=1 datapart=/dev/block/bootdevice/by-name/userdata Jan 05 18:42:02 plz surround it with ` Jan 05 18:42:09 so it will get detected as code in telegram Jan 05 18:42:41 edit the message plz @Mr_Doge Jan 05 18:42:43 i can't read it Jan 05 18:45:01 done Jan 05 18:45:15 @Mr_Doge, so yeah note that the datapart is incorrect Jan 05 18:45:21 it's okay Jan 05 18:45:42 @JBBgameich, Thanks Jan 05 18:45:44 you need to fix it though Jan 05 18:46:22 by using the .. mcpblk33 something something ? Jan 05 18:46:32 i am trying to look it up Jan 05 18:46:33 i forgot Jan 05 18:46:51 Dalton is the one to ask here, but i'll try to do my best to help you Jan 05 18:47:06 i appreaciate that Jan 05 18:48:07 @Mr_Doge, first, remove all `console=` bitls Jan 05 18:49:12 @vanyasem, Riddle me this: Why is his TARGET_PRODUCT is aosp_arm then? shouldn't it be natrium? cause lunch natrium_lineage-userdebug? Jan 05 18:49:26 @Mr_Doge, yes `/dev/mmcblk0p54` without /block Jan 05 18:49:51 @TheImpulson, should. i'm busy now with @Mr_Doge. can't help everyone at the same time Jan 05 18:50:21 send the new cmdline to me after you're done with changing it @Mr_Doge Jan 05 18:54:45 ```cmdline = androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 sched_enable_hmp=1 phy-msm-usb.floated_charger_enable=1 datapart=/dev/mmcblk0p30``` Jan 05 18:54:52 does this seems alright Jan 05 18:55:15 @vanyasem Jan 05 18:55:38 yes it does. again, i'm not a UBports expert so i might be mistaken Jan 05 18:56:01 have you patched you ubports-boot already? if not, do it now Jan 05 18:56:47 then install ubports via rootstock and pray Jan 05 18:56:58 @vanyasem, https://docs.ubports.com/en/latest/porting/installing-16-04.html Jan 05 18:57:49 (Photo, 775x108) https://irc.ubports.com/v67Oa0ff/file_3572.jpg i have no idea what i did Jan 05 18:58:02 what a hell is this Jan 05 18:58:23 run `abootimg -u /path/to/ubports-boot.img "cmdline=editedcmdline"` Jan 05 18:58:30 no need to rebuild anything now Jan 05 19:02:00 @Mr_Doge, @Mr_Doge Dalton PMed me that you don't actually need to remove console= parts Jan 05 19:02:05 if your device doesn't bootloop Jan 05 19:02:10 i am sorry i was wrong Jan 05 19:03:13 @vanyasem, this is why i was going through the chat :P just to confirm... Jan 05 19:03:27 the abootimg part is not documented at all Jan 05 19:09:06 @vanyasem, this returned … ```bad argument``` Jan 05 19:10:08 plz paste the entire command you're trying to run Jan 05 19:11:11 @vanyasem, https://paste.ubuntu.com/26327396/ Jan 05 19:11:53 try to remove spaces after `cmdline =` Jan 05 19:12:18 still the same Jan 05 19:13:10 @Mr_Doge, try to remove `' '` from the path argument Jan 05 19:13:24 experiment with it till it works, that's all i can say Jan 05 19:13:37 or send me your ubports boot in pm Jan 05 19:13:44 so i will be able to experiment myself Jan 05 19:14:12 i don't have a halium tree anywhere near me Jan 05 19:14:13 @vanyasem, didnt work either Jan 05 19:14:19 @vanyasem, this Jan 05 19:19:08 @vanyasem, it's `abootimg -u /path/to/boot.img -c "cmdline=editedcmdline"` Jan 05 19:19:11 i forgot one argument Jan 05 19:20:10 stupid me Jan 05 19:20:40 😂😂 Jan 05 19:49:31 i ran the daltons rootstock touch install script... but what is whole ubport.tar.gz file is doin in my /data/ Jan 05 19:49:34 ? Jan 05 19:49:50 it looks like it errored out Jan 05 19:50:09 so should i use jbb's script ..? Jan 05 19:51:23 i haven't pushed ubports changes Jan 05 19:51:47 it was 4 months since i promised to Jan 05 19:52:09 your best option is to annoy me in PM untill i actually do something about broken scripts Jan 05 19:52:26 or figure it out yourself. it's broken 🤷‍♂️ Jan 05 19:53:24 (Document) https://irc.ubports.com/fITlSVNs/file_3573.mp4 Jan 05 22:59:26 Marius, what if we made a way for Halium to provide the udev rules? Re: https://github.com/ubports/ubuntu-touch/issues/409 Jan 05 22:59:39 @mariogrip Jan 05 22:59:44 @UniversalSuperBox, @Mr_Doge is testing your things Jan 05 22:59:49 I forgot how you named them Jan 05 22:59:53 Uh ok Jan 05 22:59:57 regarding UBports on hybris-boot Jan 05 23:00:02 Oh neat Jan 05 23:00:03 we discussed that in PM Jan 05 23:00:16 what's the name for that project again? Jan 05 23:00:24 ut-halium-compat Jan 05 23:00:36 But I also call it issue 404 if that's easier Jan 05 23:00:49 issue 404 is a lot better Jan 05 23:00:56 let's call it issue 404 Jan 05 23:01:01 @UniversalSuperBox, as I can't remember that Jan 05 23:01:17 Yessss, it might catch on Jan 05 23:01:45 fire? Jan 05 23:01:49 It still needs the kernel changes Jan 05 23:01:52 @vanyasem, (sorry) Jan 05 23:02:06 Given recent battery issues, maybe Jan 05 23:02:21 'bat0 on fire?' Jan 05 23:03:14 root@localhost:~# dmesg … [BAT0]: On fire Jan 05 23:04:28 `system is going for shutdown NOW` Jan 05 23:04:52 s/for shutdown/to explode Jan 05 23:04:56 @UniversalSuperBox, This is important Jan 05 23:05:04 apparmor one's? Jan 05 23:05:09 Yes Jan 05 23:05:22 It's not freakin' magic, it's some initscripts Jan 05 23:05:31 I suggest everyone to enable it by default even if not planning to run UBports Jan 05 23:05:44 I guess we could add that checker to Halium docs Jan 05 23:06:08 I see two possible solutions Jan 05 23:06:20 listening Jan 05 23:06:24 We fork mer's tool Jan 05 23:06:25 Or we fork Canonical's tool Jan 05 23:06:45 @UniversalSuperBox, Marius has already done that Jan 05 23:06:50 or am I mistaken? Jan 05 23:07:12 Well, we just pop in the Halium configs and we're done Jan 05 23:07:14 we just need to fix Halium/UBports conflicts and push make it default Jan 05 23:07:24 Yep Jan 05 23:07:25 @UniversalSuperBox, yeah Jan 05 23:07:30 and we gotta do it quick Jan 05 23:07:44 And that tool automatically fixes the configs Jan 05 23:07:45 @vanyasem, there are 2-3 conflicts iirc Jan 05 23:07:57 Lemme know and I can test them Jan 05 23:08:00 @UniversalSuperBox, it does not describe the reasons though Jan 05 23:08:12 ¯\_(ツ)_/¯ Jan 05 23:08:16 Does anyone care? Jan 05 23:08:19 for enabling/disabling kernel configs Jan 05 23:08:35 We need all of the 'optional' ones anyway Jan 05 23:08:36 @UniversalSuperBox, i was impressed and scared when I read the explanations Jan 05 23:08:49 so that's a solid no Jan 05 23:09:10 And a few more as mentioned in the docs Jan 05 23:09:28 We should also provide a link to the example patches for 3.10 Jan 05 23:10:19 why haven't you added abootimg documentation Jan 05 23:10:24 Uh Jan 05 23:10:25 Wot Jan 05 23:10:29 tampering Halium fstab is not a way to go Jan 05 23:10:32 Why haven't you? Jan 05 23:10:45 why should I? you were the one to write the docs Jan 05 23:10:56 you even asked me to explain how abootimg works for you Jan 05 23:11:01 well I guess I can do it Jan 05 23:11:24 you'll have to check it though, English is not my native launguage Jan 05 23:11:42 Because I forgot the parameter for info. Or I might have been not at desk. Jan 05 23:12:19 abootimg -i /path/to/boot.img … abootimg -u /path/to/boot.img -c "cmdline=params" Jan 05 23:12:26 so will you do it or should I do it ? Jan 05 23:12:27 Yup Jan 05 23:12:32 @vanyasem, let's decide Jan 05 23:12:33 I'm not at my desk Jan 05 23:12:41 I'm in a car Jan 05 23:12:42 ok, I'm on it Jan 05 23:12:44 It is cold car Jan 05 23:12:56 @vanyasem, I hope it won't take 4 months to do that Jan 05 23:13:18 I'm sorry I offended you Jan 05 23:13:28 you haven't, I find it funny Jan 05 23:13:41 I don't understand Jan 05 23:13:57 @UniversalSuperBox, huh? Jan 05 23:14:25 I mean I'm not offended by that. I find that situation hilarious Jan 05 23:14:36 Ircin while drivin is for idiots Jan 05 23:14:50 I'm not driving Jan 05 23:15:17 Then stay in a car without drivin is for idiots Jan 05 23:15:18 @vanyasem, That I continued to recommend a solution that would not actually break Halium? Jan 05 23:15:35 Someone else is driving Jan 05 23:15:58 @UniversalSuperBox, oh I misunderstood you. I though you were talking about 4 months of not testing the 5x Jan 05 23:16:06 Oh Jan 05 23:16:20 let's drop the subject Jan 05 23:16:34 I thought you were talking about the docs not being changed Jan 05 23:16:42 Then hitchin a ride is for poor ppl Jan 05 23:16:51 Heck, those todos are the reason for issue 404 Jan 05 23:29:19 @UniversalSuperBox, Thank you! Kernel 3.10 is a real nightmare... Jan 06 02:07:32 It's been a while since I've been on, how is it coming along. To port onto a custom built phone. **** ENDING LOGGING AT Sat Jan 06 03:00:02 2018