**** BEGIN LOGGING AT Wed Dec 05 03:00:02 2018
Dec 05 05:46:43 <ubptgbot> <Dargons10> Hi Can anyone help me with fixup-mountpoints? i dont understand well that i have to make.
Dec 05 05:54:45 <ubptgbot> <Dargons10> [Edit] Hi Can anyone help me with fixup-mountpoints? i dont understand well what i have to make.
Dec 05 06:09:11 <ubptgbot> <cahgentoo> (Sticker, 512x512) https://irc.ubports.com/xlfVz5jG.webp
Dec 05 06:14:36 <ubptgbot> <abhishek_0> @Dargons10, You can look at other devices as example
Dec 05 06:39:01 <ubptgbot> <Dargons10> @abhishek_0, Ok. Ill look at then
Dec 05 06:50:27 <ubptgbot> <minlexx> @drebrez, wow, how did that happen?
Dec 05 08:53:06 <ubptgbot> Waseem Alkurdi was added by: Waseem Alkurdi
Dec 05 09:57:36 <drebrez> @minlexx I suppose I've burnt the power IC, I was powering the phone without the battery but with an external power source, with some chinese voltage converter to set 4.2 volt, and now I'm reading that power ICs are very sensible to power spikes, so that's my guesssing
Dec 05 09:59:21 <drebrez> I was using this thing here https://it.aliexpress.com/item/DC-Buck-Step-Down-Module-LM2596-DC-DC-4-0-40V-to-1-25-37V-Adjustable/32825777330.html?spm=a2g0s.9042311.0.0.27424c4dHiLuCa
Dec 05 10:02:05 <ubptgbot> <minlexx> That's sad. I've recently bought a similar thing.. haven't tried yet
Dec 05 10:08:04 <drebrez> and since I'm not expert in hardware components and electrical stuff, I don't really know how to verify / check / inspect the hardware to know exactly what's the problem
Dec 05 10:28:13 <ubptgbot> <akaWolf> drebrez just give it to repair center
Dec 05 10:31:13 <ubptgbot> <minlexx> drebrez: I actually have 2 SGS 5 phones, could send you one :D   But I think it's better to find newer device (with newer kernel), like mido for example... should be easier -_-
Dec 05 11:11:29 <ubptgbot> <bhushanshah> (and feasible in long term)
Dec 05 11:22:40 <ubptgbot> johanneswk00 was added by: johanneswk00
Dec 05 11:24:16 <ubptgbot> <johanneswk00> Hey guys has anyone got some knowledge about porting for a / b partitioned android devices? I like to try to port a UBport rom but some help would be awesome!
Dec 05 11:26:14 <ubptgbot> <SmallSharky> @johanneswk00, You just have to make simple ROM and flash it to one of the slots, isn't it?
Dec 05 11:28:45 <ubptgbot> <johanneswk00> @SmallSharky, Sounds simple! I've got no experience in porting for A / B devices so that's why I'm asking
Dec 05 11:31:31 <ubptgbot> <ilyaishere> Sergey Popov ^
Dec 05 11:32:37 <ubptgbot> <SmallSharky> Try to go simple way. If you will have problems then you will see what to do.
Dec 05 11:55:05 <ubptgbot> <Sergobot> @johanneswk00, Hi! :) … There's a Pull Request to add A/B slot support into initrams of halium-boot: https://github.com/Halium/initramfs-tools-halium/pull/14
Dec 05 11:55:23 <ubptgbot> <Sergobot> It works fine but there's a problem with encryption (see the PR).
Dec 05 11:56:01 <ubptgbot> <Sergobot> Unfortunately it's kinda frozen right now, as I don't have much time to devote to it nowadays.
Dec 05 11:56:19 <ubptgbot> <Sergobot> So, help is welcomed :D
Dec 05 12:00:01 <ubptgbot> <Waseem Alkurdi> @Sergobot  … Hi! … I have a question … Why don't graphics work on the Pixel XL / marlin?
Dec 05 12:00:16 <ubptgbot> <johanneswk00> Thanks all! I'll have a look at it and I will send you a dozen of questions if I can't get it working 😜
Dec 05 12:00:36 <ubptgbot> <Sergobot> @Waseem Alkurdi, Not sure :( … Haven't been working on that since August, so don't remember the details
Dec 05 12:01:04 <ubptgbot> <Waseem Alkurdi> @Sergobot, But is the problem solvable without anything on Qualcomm's end?
Dec 05 12:01:11 <ubptgbot> <Sergobot> It can probably be fixed rather easily, I just didn't come up with a solution yet
Dec 05 12:02:30 <ubptgbot> <Waseem Alkurdi> @Sergobot, I'm a beginner at this (but not Linux in general) ... So can I possibly bring this device up myself as a learning experience?😅
Dec 05 12:02:46 <ubptgbot> <Waseem Alkurdi> But not at* Linux
Dec 05 12:03:14 <ubptgbot> <Waseem Alkurdi> Or it needs advanced knowledge/experience/... ?
Dec 05 12:04:19 <ubptgbot> <Waseem Alkurdi> @Sergobot 😅
Dec 05 12:04:51 <ubptgbot> <Sergobot> If the Pixel is not your primary device, give it a go :D
Dec 05 12:05:34 <ubptgbot> <Sergobot> You'll learn much while trying to build and generally make things work
Dec 05 12:05:41 <ubptgbot> <Waseem Alkurdi> @Sergobot, It is my P.D., but since I have redundancy ... definitely will! … Do I need to *write* C though?
Dec 05 12:05:59 <ubptgbot> <Waseem Alkurdi> I do know a couple other languages and could read C, but can't write it😅
Dec 05 12:06:32 <ubptgbot> <Sergobot> Write? I don't think so, but definitely read C code and may be tinker with it here and there
Dec 05 12:06:49 <ubptgbot> <Waseem Alkurdi> @Sergobot, Great! 😍😍😍😍😍
Dec 05 12:07:07 <ubptgbot> <Waseem Alkurdi> I'll start maybe this weekend
Dec 05 12:07:15 <ubptgbot> <Thespartann> (Sticker, 512x341) https://irc.ubports.com/RlXol1ET.webp
Dec 05 12:07:16 <ubptgbot> <Waseem Alkurdi> Thanks!😀
Dec 05 12:07:28 <ubptgbot> <Waseem Alkurdi> @Thespartann, 😂😂😂😂😂
Dec 05 12:07:52 <ubptgbot> <Sergobot> @Waseem Alkurdi, You're welcome! If any question arises, don't hesitate to ask here :)
Dec 05 12:08:25 <ubptgbot> <Waseem Alkurdi> @Sergobot, I appreciate it ... definitely will!😁
Dec 05 12:09:25 <ubptgbot> <NotKit> @johanneswk00 to confirm, A/B device has Android 7?
Dec 05 12:10:20 <ubptgbot> <johanneswk00> @NotKit, It's the essential phone so there is a lineage port of 14.1
Dec 05 12:11:24 <ubptgbot> <Donreddy> Hi I have little question.. How much space it will took to clone github project to build halium for op3 ?
Dec 05 12:11:33 <ubptgbot> <NotKit> you will need to reformat data without encryption if you didn't
Dec 05 12:11:48 <ubptgbot> <NotKit> [Edit] you will need to reformat data without encryption if you didn't, but this is true for other Halium ports as well
Dec 05 12:12:24 <ubptgbot> <NotKit> @Donreddy, can't tell the exact numbers, but you need at least 20 GB to clone (for shallow clone) and build I think
Dec 05 12:12:53 <ubptgbot> <Waseem Alkurdi> @NotKit, But expect up to 40 GB if you unshallow the clone 😅
Dec 05 12:13:03 <ubptgbot> <Waseem Alkurdi> @Donreddy
Dec 05 12:13:10 <ubptgbot> <johanneswk00> @NotKit, Thanks that's not going to be a problem!
Dec 05 12:13:10 <ubptgbot> <Donreddy> 😳😱
Dec 05 12:13:44 <ubptgbot> <Waseem Alkurdi> @Donreddy, Got a school/college/internet café/public place with Internet nearby?😅
Dec 05 12:13:57 <ubptgbot> <Waseem Alkurdi> That might be handy😂
Dec 05 12:14:13 <ubptgbot> <Donreddy> That's why I lacking behind other developers bcoz of poor internet in India ..lol
Dec 05 12:15:01 <ubptgbot> <Donreddy> Can u upload compressed file up to 5gb ..for me
Dec 05 12:15:10 <ubptgbot> <Donreddy> Bro Waseem
Dec 05 12:15:16 <ubptgbot> <Waseem Alkurdi> @Donreddy, Same here in Jordan
Dec 05 12:15:32 <ubptgbot> <Waseem Alkurdi> I think that some of the other members might be more qualified to do this😅
Dec 05 12:16:02 <ubptgbot> <Waseem Alkurdi> Or just get a VPS
Dec 05 12:16:10 <ubptgbot> <Waseem Alkurdi> Free ones exist
Dec 05 12:16:13 <ubptgbot> <Donreddy> Ok bro. May god like peoples help us. 😭
Dec 05 12:16:22 <ubptgbot> <Waseem Alkurdi> @Donreddy, Amen😀
Dec 05 12:16:28 <ubptgbot> <Waseem Alkurdi> As I told you
Dec 05 12:16:31 <ubptgbot> <Waseem Alkurdi> Get a VPS
Dec 05 12:16:36 <ubptgbot> <Waseem Alkurdi> Azure
Dec 05 12:16:39 <ubptgbot> <Waseem Alkurdi> Microsoft
Dec 05 12:16:50 <ubptgbot> <Waseem Alkurdi> There's been a tutorial a while back
Dec 05 12:16:57 <ubptgbot> <Waseem Alkurdi> By @Albe95 at XDA
Dec 05 12:17:07 <ubptgbot> <Waseem Alkurdi> on how to build on Azure
Dec 05 12:17:12 <ubptgbot> <Donreddy> Yes but that is headache bcoz need  to attach CC then only it will activate..lol
Dec 05 12:17:18 <ubptgbot> <Waseem Alkurdi> @Donreddy, ?
Dec 05 12:17:22 <ubptgbot> <Waseem Alkurdi> No need
Dec 05 12:17:32 <ubptgbot> <Waseem Alkurdi> Just get a prepaid card charged with $0
Dec 05 12:17:43 <ubptgbot> <Waseem Alkurdi> Or a .edu email
Dec 05 12:17:52 <ubptgbot> <Waseem Alkurdi> At a university
Dec 05 12:18:01 <ubptgbot> <Donreddy> @Waseem Alkurdi, Do u have any plz come on DM bro.it will be help ful
Dec 05 12:18:17 <ubptgbot> <Waseem Alkurdi> @Donreddy, What's DM?
Dec 05 12:18:27 <ubptgbot> <Donreddy> Direct message
Dec 05 12:18:31 <ubptgbot> <Waseem Alkurdi> Oh
Dec 05 12:18:37 <ubptgbot> <Donreddy> 👍
Dec 05 12:18:45 <ubptgbot> <Waseem Alkurdi> No need😅
Dec 05 12:18:53 <ubptgbot> <Waseem Alkurdi> I have one but it isn't empty
Dec 05 12:18:56 <ubptgbot> <Waseem Alkurdi> Has money
Dec 05 12:19:32 <ubptgbot> <Donreddy> No I m asking how to get one.. I don't want spam this group here..bro
Dec 05 12:19:41 <ubptgbot> <Waseem Alkurdi> Okay
Dec 05 16:28:35 <ubptgbot> <Stefano0101> @Donreddy, ALready built, needs debugging, kernel rebuilding. See here: https://halium.mynameisivan.ru   that's Ivan Semkin work there and Marius is also building/porting for Op3/3t, but he won't answer any of my questions (probably busy)
Dec 05 16:31:40 <ubptgbot> <Stefano0101> @Donreddy, https://pad.ubports.com/p/porting-devices
Dec 05 16:37:24 <ubptgbot> <Stefano0101> Plasma Mobile on Op3/3t work in progress . Ivan Semking, Bhushan Shah...
Dec 05 16:37:35 <ubptgbot> <Stefano0101> (Photo, 1440x2560) https://irc.ubports.com/PbqLayCd.png
Dec 05 16:38:49 <ubptgbot> <Stefano0101> (Photo, 996x423) https://irc.ubports.com/rCCVMfSc.png
Dec 05 16:40:12 <ubptgbot> <Stefano0101> (Photo, 996x423) https://irc.ubports.com/hN4JSo25.png
Dec 05 16:40:16 <ubptgbot> <Stefano0101> And this is UT screenshot. No graphics yet.
Dec 05 16:43:17 <ubptgbot> <abhishek_0> @Stefano0101, Hey this is cool
Dec 05 16:43:26 <ubptgbot> <abhishek_0> @Stefano0101, What about UT ?
Dec 05 16:44:12 <ubptgbot> <abhishek_0> Use the latest edge rootfs
Dec 05 16:46:18 <ubptgbot> <abhishek_0> And grab the logs
Dec 05 16:51:25 <ubptgbot> <Stefano0101> @abhishek_0, Yes, it is. Bhushan is on it, has the logs, trying to sort out the Touch input. (Plasma Mobile). UT is the screenshot, boots up, ssh ok, wifi ok, touch not yet, no graphics.
Dec 05 16:51:30 <ubptgbot> <Donreddy> (Sticker, 512x512) https://irc.ubports.com/0QarHg12.webp
Dec 05 16:52:42 <ubptgbot> <Waseem Alkurdi> @Stefano0101, How did you get the screenshot if graphics don't work?
Dec 05 16:52:46 <ubptgbot> <Stefano0101> @abhishek_0, I'm only a tester, all credit to Ivan and Bhushan
Dec 05 16:53:17 <ubptgbot> <Stefano0101> @Waseem Alkurdi, adb shell , terminal on PC
Dec 05 16:53:36 <ubptgbot> <Waseem Alkurdi> @Stefano0101, No, not the screenfetch
Dec 05 16:53:40 <ubptgbot> <Waseem Alkurdi> I meant this
Dec 05 16:53:47 <ubptgbot> <Donreddy> @Stefano0101, Did call works..?
Dec 05 16:53:48 <ubptgbot> <Waseem Alkurdi> @Stefano0101, This
Dec 05 16:53:57 <ubptgbot> <abhishek_0> @Stefano0101, Ah!, I thought you were porting to some new device :')
Dec 05 16:54:37 <ubptgbot> <Stefano0101> Not known, as won't respond to touch as yet. Bhushan is trying to fix it.
Dec 05 16:55:22 <ubptgbot> <Stefano0101> @abhishek_0, Technically a new device, as there is not a working port for Op3/3t
Dec 05 16:56:11 <ubptgbot> <Stefano0101> @Waseem Alkurdi, Photo made with my Pentax K-50 18-135mm
Dec 05 16:58:46 <ubptgbot> <Stefano0101> @abhishek_0, But, Marius might have a surprise for us, never known. He can really keep a secret. Maybe a Christmas present???
Dec 05 16:59:33 <ubptgbot> <Waseem Alkurdi> @Stefano0101, 😅
Dec 05 16:59:48 <ubptgbot> <Waseem Alkurdi> I meant
Dec 05 17:00:16 <ubptgbot> <Waseem Alkurdi> If there is no graphics output, because as you say, graphics don't work, how did this screen show?
Dec 05 17:01:12 <ubptgbot> <Stefano0101> @Waseem Alkurdi, NO graphics on UT, on Plasma Mobile is working.
Dec 05 17:01:20 <ubptgbot> <Waseem Alkurdi> Oh 😅
Dec 05 17:01:46 <ubptgbot> <Waseem Alkurdi> But still, half the work is done!😂
Dec 05 17:02:56 <ubptgbot> <Stefano0101> @Waseem Alkurdi, https://github.com/Halium/projectmanagement/issues/63#issuecomment-437081451
Dec 05 17:27:57 <ubptgbot> <unknown> @Stefano0101, Nice :-)
Dec 05 17:28:44 <ubptgbot> <unknown> @Stefano0101, Which one are you testing on?
Dec 05 17:39:33 <ubptgbot> <Stefano0101> @unknown, Op3t
Dec 05 21:16:13 <ubptgbot> f171pp0 was added by: f171pp0
Dec 05 21:22:00 <ubptgbot> <f171pp0> Hi. I got stuck at when I have to add vendor blobs to ```vendor/```  … I've searched into ```TheMuppets’ GitHub organization``` repo (https://github.com/TheMuppets/) and I haven't found my device's codename, but I've found a directory called ```msm8953-common```, assuming that msm8953 is the codename for snapdragon625 and the device
Dec 05 21:22:00 <ubptgbot>  I was looking for has this chipset, can I use these blobs?
Dec 06 02:06:03 <ubptgbot> <Ben Mayo> So I'm starting a port to the Essential PH-1. The kernel is compiling now, so I'm not sure its even going to work yet, but if it does- does anybody have some information about how to properly flash halium-boot to the device, considering it has an a/b partition layout?
**** ENDING LOGGING AT Thu Dec 06 03:00:01 2018