**** BEGIN LOGGING AT Mon Oct 21 02:59:58 2019 Oct 21 04:50:58 @Aka [How can I patch file with kdiff file?], You were working on j5xnlte right? Oct 21 04:54:06 Were is good word. Oct 21 05:17:41 @Akatsu . [Were is good word.], Oh :p Oct 21 05:42:07 Too much for me Oct 21 05:42:24 I have no idea how to bring this stupid modem up Oct 21 06:28:09 Yea Oct 21 06:28:16 Had the exact problem Oct 21 06:28:20 Gave up as well **** BEGIN LOGGING AT Mon Oct 21 06:44:26 2019 Oct 21 06:49:46 Jason shashwin was added by: Jason shashwin Oct 21 07:15:30 On what have you failed? Oct 21 07:15:41 @nsagottaseethis Oct 21 07:20:34 Well have you got ub running? Because from history I can see you had issues with compiling Oct 21 07:44:17 Yea I followed a tutorial made for another samsung device Oct 21 07:44:31 About the bluetooth error Oct 21 07:44:54 And it failed once more after that Oct 21 07:45:00 Well, you had to add system_bt repo Oct 21 07:45:25 @Akatsu . [Well, you had to add system_bt repo], I dont really remember the exact procedure Oct 21 07:45:57 Its been some time but I believe the tutorial wrote that you had to do that Oct 21 07:46:13 And mka systemimage if fails on active display then comment it inside /hardware/samsung/android.mk Oct 21 07:46:23 At the end you got booting Ubuntu? Oct 21 07:46:29 Nope Oct 21 07:46:50 I had an error message while compiling Oct 21 07:46:55 About hardware again Oct 21 07:46:56 https://github.com/Kiciuk/local_manifest Oct 21 07:47:16 https://github.com/EralpCelebu Oct 21 07:47:21 [Edit] https://github.com/EralpCelebi Oct 21 07:47:29 I think İ has my manifest there Oct 21 07:47:39 I think about doing mainline on j5 Oct 21 07:48:01 Ill compare them when I get time Oct 21 07:48:23 @Akatsu . [I think about doing mainline on j5], If you have time we can work on that Oct 21 07:49:26 I'm bit too stupid Oct 21 07:49:56 Well Oct 21 07:50:11 I dont really have that many braincells either man Oct 21 07:50:19 :p Oct 21 07:51:38 Ill re-fetch the source today Oct 21 07:51:45 I do have other sources where I get ril and broken audio Oct 21 07:51:46 To try it out with your manifest Oct 21 07:51:52 @Akatsu . [I do have other sources where I get ril and broken audio], I think Oct 21 07:51:55 But it's slow Oct 21 07:52:12 @Akatsu . [I do have other sources where I get ril and broken audio], I have seen something about that Oct 21 07:52:15 And phone takes long to wakeup from sleep Oct 21 07:52:51 @Akatsu . [And phone takes long to wakeup from sleep], I feel like Ive seen exact outcomes in this group Oct 21 07:53:07 Is your phone FQ? Oct 21 07:53:13 Fq? Oct 21 07:53:21 The model of j5xnlte Oct 21 07:53:27 Fn Oct 21 07:53:43 It should be more stable on that Oct 21 07:53:45 J510fn Oct 21 07:53:50 Compared to mine Oct 21 07:57:38 Ill try getting ubuntu to boot on my phone today Oct 21 08:02:34 I will try mess one more time too Oct 21 08:02:46 But now I'm in job Oct 21 08:02:53 5h more Oct 21 08:05:29 Kkk Oct 21 08:05:59 Im busy right now but Ill start fetching in about 3 hours Oct 21 08:29:39 Building Halium is just the same as building regular LOS, correct? Oct 21 08:31:01 Less packages Oct 21 08:31:09 I mean the process its self. Oct 21 08:31:18 But yes, setup source breakfast and make Oct 21 08:31:26 Thought so, thanks. Oct 21 08:43:39 Oh, well that errored out straight away. … ```[ 99% 1148/1149] glob vendor/qcom/opensource/interfaces/display/config/1.1/Android.bp … ninja: error: '/home/android/halium/out/target/product/crownlte/obj/STATIC_LIBRARIES/libbrotli_intermediates/export_includes', needed by '/home/android/halium/out/target/product/crownlte/obj/EXECUTABLES/upda Oct 21 08:43:40 ter_intermediates/import_includes', missing and no known rule to make it … 09:43:26 ninja failed with: exit status 1``` Oct 21 08:49:50 Looks like pre-built apk error Oct 21 08:50:02 Try to get rid of it and android bp Oct 21 08:51:08 Is that note9? Oct 21 08:53:43 Note9 yes. It shouldn't be using anything from the qcom vendor though. Oct 21 08:53:49 I'll have a go through the trees in a sec Oct 21 09:00:29 What tree are you using? Oct 21 09:00:44 I don't remember to have it running 7.1 Oct 21 09:27:11 I was using whatshisfaces branch Oct 21 09:27:13 Herrie Oct 21 09:59:57 docEbrown was added by: docEbrown Oct 21 10:02:11 Hi all, I'm trying to debug a Nexus 5X bullhead boot loop. I've followed the standard instructions as well as tried to use hybris-recovery.img without being able to prevent the boot loop. Unfortunately no kernel logs are being produced in /sys/fs/pstore. Any help would be greatly appreciated! Oct 21 10:31:27 Isn't nexus officially supported? Oct 21 10:31:46 @docEbrown [Hi all, I'm trying to debug a Nexus 5X bullhead boot loop. I've followed the st …], Does the device work in Android? Oct 21 10:32:07 There is a hardware fault with the Nexus 5X and 6P that can cause the big cores to completely fail Oct 21 10:32:10 yes lineage works just fine. Oct 21 10:32:28 @TuxThePenguin [There is a hardware fault with the Nexus 5X and 6P that can cause the big cores …], Awesome! Oct 21 10:33:33 @TuxThePenguin [There is a hardware fault with the Nexus 5X and 6P that can cause the big cores …], Does that apply to all of the devices? Oct 21 10:33:43 Afaik yes Oct 21 10:34:04 Well that sucks Oct 21 10:34:07 Basically over time heat stress causes the solder balls under the CPU to fail Oct 21 10:34:17 And in 99% of cases it's under the big cores Oct 21 10:34:39 There is a workaround … Disabling those cores … So you lose about half of the potential performance but the device still works Oct 21 10:34:55 Although if it hasn't happened to you yet then it's probably something else Oct 21 10:35:56 It is a 2nd hand phone I just got off a friend. It seemed to have been working fine. I can log in via adb shell, but none of the kernel logs are present Oct 21 13:53:29 so I am now changing some defconfigs spesifically arm/...j5xnlte_eur... Oct 21 13:54:28 should I fix every warning on the mer check? Oct 21 14:03:30 @Akatsu . [I will try mess one more time too], I would pitch in if I had one, I only have a note 4 and a note 8, I DD the note 8 though so dont expect anything on that for a while Oct 21 14:18:45 @nsagottaseethis [so I am now changing some defconfigs spesifically arm/...j5xnlte_eur...], if you want ubuntu touch then don;t bother with mer-kernel-check Oct 21 14:18:52 my repos have all fixes in it Oct 21 14:19:03 hm Oct 21 14:19:22 the halium-boot fstab is really making me frusturated Oct 21 14:19:33 fstab? Oct 21 14:24:15 yea Oct 21 14:24:41 im not really sure about what are you talking tbh Oct 21 14:42:28 @nsagottaseethis [the halium-boot fstab is really making me frusturated], Whats the problem your seeing? Oct 21 14:43:15 I figured it out Oct 21 14:43:28 indentation Oct 21 14:44:44 Ahh yeah, that matters with hybris-boot Oct 21 15:51:09 So Oct 21 15:51:59 realloc: out of memory Oct 21 15:52:08 mmap: Out of memory Oct 21 15:52:21 thats something new Oct 21 15:52:25 with my sources/ Oct 21 15:52:27 ? Oct 21 15:52:28 I think you know what I'm about to say, but you need more memory Oct 21 15:52:29 yep Oct 21 15:52:43 @UniversalSuperBox is that RAM issue? Oct 21 15:52:46 :p good point Oct 21 15:52:59 i build now on new sources Oct 21 15:53:01 @Akatsu . [@UniversalSuperBox is that RAM issue?], Well, yes Oct 21 15:53:08 wondering if it will work Oct 21 15:53:14 interesting Oct 21 15:53:25 if it work i will upload it Eralp Oct 21 15:54:16 im on 16GB of ram Oct 21 15:54:45 switched 2 weeks ago from 8, got like 16GB samsung B-die for 50$ brand new Oct 21 15:55:18 So Oct 21 15:55:23 I closed every application Oct 21 15:55:30 background daemon Oct 21 15:55:35 didnt work Oct 21 15:55:43 killed the xserver Oct 21 15:55:47 switched to tty1 Oct 21 15:55:50 still didnt work Oct 21 15:55:54 maybe `make -j 1` ? not sure it makes a difference Oct 21 15:56:14 Im getting this error from halium-install Oct 21 15:57:23 `-v` ? Oct 21 15:57:51 and then pastebin the whole log Oct 21 16:00:09 welp pastebin is for soem reason banned in my country Oct 21 16:00:25 https://github.com/JBBgameich/halium-install Im trying to set this one up Oct 21 16:01:21 @nsagottaseethis [welp pastebin is for soem reason banned in my country], ALL of them? There's dozens of services .... gist? Oct 21 16:01:55 true Oct 21 16:02:19 Ill try the second one first Oct 21 16:02:35 if it fails Ill put it on gist Oct 21 16:02:53 or as a gist would be more appropriate Oct 21 16:08:22 cp: error writing '.halium-install-rootfs.iq3Er/usr/bin/qemu-arm-static': No space left on device … interesting Oct 21 16:10:54 Very different error, but hey. Are the partitions of your device full? Oct 21 16:10:58 https://gist.github.com/EralpCelebi/6464642dea3f23f37be684710774e231 this is the first commands output Oct 21 16:11:07 @dohniks [Very different error, but hey. Are the partitions of your device full?], do you think wiping would help? Oct 21 16:12:39 nope Oct 21 16:12:43 still the same error Oct 21 16:12:49 its really weird Oct 21 16:14:38 You're not using any cmd line options it seems. Is that correct? Check `-h` Oct 21 16:15:06 (Gotta go) Oct 21 16:16:35 I used verbose Oct 21 16:16:39 @nsagottaseethis use halium-install from jbb Oct 21 16:16:55 yea Im trying to use that one Oct 21 16:17:07 Debug: Chosen rootfs is pm-rootfs-20190811-133243.tar.gz … Debug: Chosen android image is system.img … Debug: Chosen release is halium … I: Writing rootfs into mountable image … Formatting '.halium-install-imgs.GGzlO/rootfs.img', fmt=raw size=1073741824 … mke2fs 1.44.1 (24-Mar-2018) … Discarding device blocks: done Oct 21 16:17:07 … Creating filesystem with 262144 4k blocks and 65536 inodes … Filesystem UUID: 5006bc62-4cec-40c2-b02a-6792d1535dd9 … Superblock backups stored on blocks: … 32768, 98304, 163840, 229376 … Allocating group tables: done … Writing inode tables: done … Creating journal (8192 blo Oct 21 16:17:07 cks): done … Writing superblocks and filesystem accounting information: done … ^CI: Cleaning up Oct 21 16:17:07 @nsagottaseethis [https://gist.github.com/EralpCelebi/6464642dea3f23f37be684710774e231 this is the …], And this is its error? Oct 21 16:17:23 @nsagottaseethis [Debug: Chosen rootfs is pm-rootfs-20190811-133243.tar.gz … Debug: Chosen android i …], You need to waittttttt Oct 21 16:17:26 A lootttt Oct 21 16:17:37 @Mattia990 [And this is its error?], no thats the other one Oct 21 16:17:59 @nsagottaseethis [Debug: Chosen rootfs is pm-rootfs-20190811-133243.tar.gz … Debug: Chosen android i …], Redo this and wait, if it will give you an error you'll see it Oct 21 16:17:59 @Mattia990 [You need to waittttttt], I exited the program first Oct 21 16:18:12 just because how massive the the error log was Oct 21 16:18:33 Ill upload a part of it as a gist Oct 21 16:18:38 @nsagottaseethis [Ill upload a part of it as a gist], Ah okk Oct 21 16:20:25 Don't you need -p pm or something? Oct 21 16:21:05 https://gist.github.com/EralpCelebi/45b8bf6d68cd060a88ee2c1250026a60 Oct 21 16:21:14 @dohniks [Don't you need -p pm or something?], I added -p halium Oct 21 16:21:42 should be -p pm Oct 21 16:21:49 oh Oct 21 16:21:56 trying Oct 21 16:23:49 yep it worked Oct 21 16:40:10 sooo it doesnt boot Oct 21 16:45:14 is there a way to clean halium repo ? Oct 21 16:45:20 local one Oct 21 16:45:31 delete everything outside Oct 21 16:49:50 did yours fail too Oct 21 17:10:35 any hints how long will repo sync takes on halium with 10mbps? Oct 21 17:14:09 maybe up to an hour, just a guess to Oct 21 17:14:11 [Edit] maybe up to an hour, just a guess tho Oct 21 17:14:46 after you sync Oct 21 17:14:52 copy the folder somewhere Oct 21 17:15:06 so you wont have to sync over and over again Oct 21 17:16:56 im pretty out of space Oct 21 17:18:05 my .repo on halium-7.1 is <4 GB Oct 21 17:18:39 (Photo, 775x273) https://irc.ubports.com/hZA0vdGL.png any idea how to resize /home ? Oct 21 17:19:01 @Akatsu . [], do you have lvm? Oct 21 17:19:08 probably nope Oct 21 17:19:16 ahh Oct 21 17:19:21 use a live usb Oct 21 17:21:32 im looking now at geekbench Oct 21 17:21:33 wow Oct 21 17:21:49 pinephone will have slower cpu than old snapdragon 410 Oct 21 17:22:03 Id still buy one Oct 21 17:22:13 i will skip probably Oct 21 17:22:29 at least you dont have to deal with all of this :p Oct 21 17:22:48 my wish list: Something like snapdragon 625(low power long battery), 6000Mah 5.5FHD 6/128 Oct 21 17:23:01 can be thick Oct 21 17:23:18 ohoho Oct 21 17:23:33 battery and 5.5 is out of question sadly Oct 21 17:23:45 yea Oct 21 17:23:49 everything is 6+ nowadays, i do like my mido size Oct 21 17:24:02 yea Oct 21 17:24:11 I dont really like big phones either Oct 21 17:24:33 my first smartphone was 4 Oct 21 17:24:42 tbh my wishlist is basicly a arm development board in the form of a mobile phone Oct 21 17:24:52 then 5.5 and its enought, i don;t have hands for more Oct 21 17:25:01 :p Oct 21 17:25:14 pinephone is just like arm development board Oct 21 17:25:22 but A64 is dated Oct 21 17:25:24 yea exactly Oct 21 17:25:27 and Mali is shit Oct 21 17:25:32 basicly Oct 21 17:26:05 I would like to buy a n900 nokia Oct 21 17:26:37 it would be basicly useless but still Oct 21 17:27:16 whatever nice to meet you man Oct 21 17:30:46 rixchy_ was added by: rixchy_ Oct 21 17:31:04 Hi! Someone has chagalllte in this group or an other Samsung device? Oct 21 17:31:11 *any Oct 21 17:32:20 After installing hybris-boot, my device has been giving "KERNEL IS NOT SEANDROID ENFORCING" I think this is a boot/kernel build issue I made? Oct 21 17:32:38 I do Oct 21 17:32:53 and as far as I know it isnt Oct 21 17:33:03 thats ok Oct 21 17:33:09 we are not using SELINUX Oct 21 17:33:10 Oh, ok. Do you know how to fix it? Oct 21 17:33:20 you dont have to :p Oct 21 17:33:21 its ok, its supposed to be like that Oct 21 17:33:31 @Akatsu . [we are not using SELINUX], I understand that, but it's stuck at the Samsung logo. Oct 21 17:33:41 then its different story Oct 21 17:33:43 Means, it is just stuck at that message. Oct 21 17:33:47 look if its recognized by USB Oct 21 17:33:52 you should get telnet Oct 21 17:33:55 lsusb Oct 21 17:34:13 Wait, lemme look into it. Oct 21 17:34:27 if you get telnet then kernel is booted Oct 21 17:34:41 if you get ssh then rootfs is also working Oct 21 17:34:41 It is not detected in USB, let me check telnet. Oct 21 17:34:54 it has to be detected via usb Oct 21 17:35:05 because it attach as network card over usb Oct 21 17:36:44 oh its exynos Oct 21 17:36:52 Yup. Oct 21 17:36:58 Does that matter? Oct 21 17:37:09 I mean, I am not that smart in Halium industry for now. Oct 21 17:37:11 most ppl work on qualcomm Oct 21 17:37:20 Oh, ok. Oct 21 17:37:22 so its easier to get fixes Oct 21 17:37:30 are you trying to get ubuntu? Oct 21 17:37:34 or other os? Oct 21 17:37:37 What do you mean by that. Oct 21 17:37:53 Plasma Mobile Oct 21 17:37:57 Yeah. Oct 21 17:38:03 Plasma it is. Oct 21 17:38:08 oh, plasma is indeed hybris Oct 21 17:38:23 Yea mine just went into a bootloop a few minutes ago Oct 21 17:38:34 wait by bootloop you mean what? Oct 21 17:38:45 screen flickers 2s and it reboot? Oct 21 17:39:31 i will build on new sources in 1h Oct 21 17:39:31 Ok, I cannot detect the device in telnet. Oct 21 17:40:03 I cannot find the network name. Terminal just spits out bunch of errors running "dmesg | tail". Oct 21 17:40:10 if you cannot see device under lsusb it means your kernel fail to boot Oct 21 17:40:58 Yup, lsusb cannot detect it either. I think it is a build issue afterall. Oct 21 17:41:18 have you applied mer hybris fixes and fixmountpoints? Oct 21 17:41:35 Hybris fixes.. Oct 21 17:41:40 Maybe not. Oct 21 17:41:41 mer kernel check Oct 21 17:41:44 script Oct 21 17:41:57 then you have to apply changes to defconfig Oct 21 17:42:00 I did everything after the doc, so. Oct 21 17:42:11 I did the kernel check script. Oct 21 17:42:25 Where was the defconfig again. Oct 21 17:42:37 under kernel dir Oct 21 17:42:43 Thanks. Oct 21 17:42:46 kernel/arch/armXX Oct 21 17:42:59 can you link to your soruces? Oct 21 17:43:11 Under kernel I have "samsung/exybos5420/arch/" Oct 21 17:43:39 @Akatsu . [can you link to your soruces?], I wanted to upload them to Github, but I didn't do it yet. Will upload them. Oct 21 17:43:49 or atleast to base ones Oct 21 17:43:53 lineageOS repo? Oct 21 17:44:15 Yup. Oct 21 17:46:17 I am so glad I joined this chat. Oct 21 17:48:45 @Akatsu . [screen flickers 2s and it reboot?], yep Oct 21 17:52:11 Open device/samsung/msm8916-common/rootdir/Init.qcom.rc and put hash before this line marked Oct 21 17:52:20 (Photo, 720x1280) https://irc.ubports.com/7giid9br.png Oct 21 17:52:46 It's adsp doing its job in failing Oct 21 17:52:57 Wish I get it working on other sources Oct 21 17:54:11 Mka system image and again on device Oct 21 17:57:19 Ok, hey again. I apologzie if I seem a bit "nooby" to you, but for some reason the repo won't upload to GitHub. Oct 21 17:57:32 I used the Terminal and on Github only Readme shows. Oct 21 17:57:43 im nooby too Oct 21 17:58:45 SO, yeah. But I gotta get rid of the issue. Oct 21 17:58:58 Let me look into the docs and the config file. Oct 21 18:02:37 @Akatsu . [then you have to apply changes to defconfig], I checked, CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC are both set to y. Oct 21 18:02:54 I apologize that you cannot view my source, but I will think of something later. Oct 21 18:03:04 But, what is this. http://docs.halium.org/en/latest/porting/build-sources.html#as-of-systemd-233-the-3-4-kernel-needs-to-have-a-patch-in-order-to-boot-tmpmnt-not-being-created Oct 21 18:03:43 small issue Oct 21 18:03:49 its qualcomm kernel Oct 21 18:04:05 oh Oct 21 18:04:06 Ok. Thank you for the info. Oct 21 18:04:08 it should work Oct 21 18:04:10 do it Oct 21 18:04:14 Alright. Oct 21 18:04:51 I have no idea where this file is located in the build directory. https://github.com/ubports/android_kernel_google_msm/pull/5/commits/1ad88b041787d8ce8407a021271ef1031e95cba6 Oct 21 18:07:13 your source is different Oct 21 18:07:32 What do you mean. Oct 21 18:07:41 https://github.com/LineageOS/android_kernel_samsung_exynos5420/blob/cm-14.1/fs/stat.c Oct 21 18:07:52 it uses different variables Oct 21 18:07:53 Thanks. Oct 21 18:08:01 I imported it from LOS> Oct 21 18:08:06 I did, Oct 21 18:08:33 But I am going to overwrite tha file anyways, just in case. Oct 21 18:11:23 After running breakfast do I need to do the kernel-check script? Oct 21 18:11:29 (Again?) Oct 21 18:11:34 no Oct 21 18:11:37 Ok. Oct 21 18:11:54 The same with fixup-mountpoints, right? Oct 21 18:12:08 these arent changed with breakfast Oct 21 18:12:15 Ok, thank you. Oct 21 18:12:41 Ok, the bootimg is rebuilding. Oct 21 18:12:51 I mean no. Oct 21 18:12:58 *the hybris-boot. Oct 21 18:13:02 Sorry. Oct 21 18:13:27 Does systemimage also has to be rebuilt? Oct 21 18:13:35 Or the hybris-boot only. Oct 21 18:13:45 hey, I've booted UT rootfs and have graphics with some basic stuff working. looking at dmesg I see the following services failing: `qti pd_mapper qseeproxydaemon qvop-daemon cnss-daemon ril-daemon ril-daemon2 & ofono` so it's a given I get no telephony etc. here's full dmesg of UT booting up: https://pastebin.com/XfkcJzvK Oct 21 18:14:00 you dont need android image to run kernel Oct 21 18:14:21 @Akatsu . [you dont need android image to run kernel], Alright. I will keep you updates after the installation. Oct 21 18:14:23 if you boot kernel without android image and rootfs you will just boot into built into kernel initramfs Oct 21 18:14:46 device is OnePlus 5 on cm-14.1 base with 4.4 kernel Oct 21 18:14:50 so telnet device under lsusb will be exposed Oct 21 18:15:32 I kinda didn't understand what you said. LOL. But I will install it now. Oct 21 18:20:26 @rixchy_ [Ok, hey again. I apologzie if I seem a bit "nooby" to you, but for some reason t …], You need to fork it, then create your own branch in the fork and commit your changes Oct 21 18:23:59 Ok, so I think I have some good news. Oct 21 18:24:54 Akatsu I installed the rebuilt boot.img, and I just found out on my notifications panel, some sort of drive mounted (It is the tablet.) Oct 21 18:25:07 So I am going to try lsusb again. Oct 21 18:25:26 Same problem. Why halium needs java mka mkbootimg? Oct 21 18:25:26 (Document) https://irc.ubports.com/Ju9DwNx7.xml Oct 21 18:25:50 @srmane4444 [Same problem. Why halium needs java mka mkbootimg?], give error msg Oct 21 18:25:54 Akatsu IT GOT DETECTED Oct 21 18:26:03 The kernel booted. Oct 21 18:26:04 telnet interface mer debug switch etc? Oct 21 18:26:13 Wait, let me switch into telnet. Oct 21 18:26:25 I am happy only because lsusb detected it with the connection name LOL. Oct 21 18:27:00 It says "iSerial 4 Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd" Oct 21 18:27:09 gratz you have telnet Oct 21 18:27:14 Yay. Oct 21 18:27:17 @Akatsu . [give error msg], ```mka mkbootimg 16:31:57 Failed to run java: exec: "java": executable file not found in $PATH panic: Failed to run java: exec: "java": executable file not found in $PATH``` Oct 21 18:27:33 You have to install java I guess. Oct 21 18:27:37 JDK. Oct 21 18:27:43 just install jdk 1.7 Oct 21 18:28:52 I looked at the docs and it said to run "dmesg | tail".. Is this bad: "dmesg | tail … [ 2264.937481] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 sdb15 sdb16 sdb17 sdb18 sdb19 sdb20 sdb21 … [ 2264.941768] sd 2:0:0:0: [sdb] Attached SCSI removable disk … [ 2267.849437] EXT4-fs (sdb3): mounted filesystem Oct 21 18:28:52 with ordered data mode. Opts: (null) … [ 2268.295796] EXT4-fs (sdb18): mounted filesystem without journal. Opts: (null) … [ 2268.585876] EXT4-fs (sdb20): mounted filesystem with ordered data mode. Opts: (null) … [ 2268.607359] EXT4-fs (sdb16): recovery complete … [ 2268.609200] EXT4-fs (sdb16): mounted filesystem with ordered data mode. Opts: (null Oct 21 18:28:52 ) … [ 2269.249398] EXT4-fs (sdb21): recovery complete … [ 2269.249407] EXT4-fs (sdb21): mounted filesystem with ordered data mode. Opts: (null) … [ 2269.292978] EXT4-fs (sdb19): mounted filesystem with ordered data mode. Opts: (null)". Oct 21 18:29:13 its ok imo Oct 21 18:29:20 Ha, lmao. Oct 21 18:29:26 have you tried to install rootfs with plasma/ Oct 21 18:29:27 ? Oct 21 18:29:32 Not yet. Oct 21 18:29:38 @Akatsu . [just install jdk 1.7], What is this version 1.7? can openjdk-8-jdk? Oct 21 18:29:48 jdk-7 proobably Oct 21 18:30:11 @Akatsu . [jdk-7 proobably], no such package Oct 21 18:30:25 Atleast on Ubuntu. Oct 21 18:30:57 ok jdk8 Oct 21 18:30:58 my bad Oct 21 18:31:06 It is ok. Oct 21 18:31:42 Ok, so I have an issue. Oct 21 18:32:27 Docs said, after running "dmesg | tail", you should have this some sort of line, "[ 1234.123456] rndis_host 1-7:1.0 enp0s20f0u7: renamed from usb0" I do not have such. Oct 21 18:32:35 @rixchy_ [I looked at the docs and it said to run "dmesg | tail".. Is this bad: "dmesg | t …], As you can see here. Oct 21 18:32:49 as long as you have interface its ok Oct 21 18:32:59 Ok, but I cannot connect to telnet. Oct 21 18:33:09 and before you were able? Oct 21 18:33:15 No.. Oct 21 18:33:24 (Sticker, 512x368) https://irc.ubports.com/lef3rn5k.webp Oct 21 18:33:29 xd Oct 21 18:33:46 Ok, ok. I am just going to install Plasma. xd Oct 21 18:33:55 The last time I built halium-7.1, and java is not needed there, and this has the great advantage of not having java, because its build eats up all the memory and throws it into a swap of 1 GB and pc completely freezes. On halium-7.1 this was not. Consumption above 2 GB did not rise. RAM - 3376 mb. Oct 21 18:34:08 Well, you can use make. Oct 21 18:34:13 Not mka, as seen in the docs. Oct 21 18:36:44 But now the need arose to build halium 8.1 a year later. Oct 21 18:38:39 Wait, wait, wait to be able to run halium-install your device needs to be detected in adb? Oct 21 18:38:48 yes Oct 21 18:38:51 wait Oct 21 18:38:53 twrp Oct 21 18:38:57 you have to run it Oct 21 18:38:59 Ik, I have it installed. Oct 21 18:39:08 use jbb install script Oct 21 18:39:11 btw Oct 21 18:39:33 What is that script. Oct 21 18:39:35 Where is it. Oct 21 18:39:45 https://zackptg5.com/android.php#disverfe Oct 21 18:39:54 https://github.com/JBBgameich/halium-install Oct 21 18:40:12 I am. Oct 21 18:42:53 Device is detected, rootfs.img is being pushed to /data at the moment. Oct 21 18:43:02 Brb. Oct 21 18:54:21 Alright, it is done, but. Oct 21 18:54:55 I am concerned about something, it seems like an error, tho I am not sure. Oct 21 18:55:23 I apologize for this long text/spam. "./halium-install ~/halium/out/target/product/chagalllte/pm.tar.gz ~/halium/out/target/product/chagalllte/system.img … Debug: Chosen rootfs is /home/rixchy_/halium/out/target/product/chagalllte/pm.tar.gz … Debug: Chosen android image is /home/rixchy_/halium/out/target/product/chagalllte/system.img … Deb Oct 21 18:55:24 ug: Chosen release is none … I: Writing rootfs into mountable image … I: Writing android image into mountable image … I: Running post installation tasks … I: Shrinking images … e2fsck 1.44.1 (24-Mar-2018) … resize2fs 1.44.1 (24-Mar-2018) … Resizing the filesystem on .halium-install-imgs.V023J/system.img to 35788 (4k) blocks. … Begin pass 2 (max = 1 Oct 21 18:55:24 2385) … Relocating blocks XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX … Begin pass 3 (max = 17) … Scanning inode table XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX … The filesystem on .halium-install-imgs.V023J/system.img is now 35788 (4k) blocks long. … I: Unmounting images … I: Pushing rootfs and android image to /data via ADB … .ha Oct 21 18:55:24 lium-install-imgs.V023J/rootfs.img:....2 MB/s (2147483648 bytes in 648.497s) … .halium-install-imgs.V023J/system.img:... 3.1 MB/s (146587648 bytes in 44.819s) … I: Cleaning up … umount: .halium-install-rootfs.hIuz4: not mounted." Oct 21 18:55:42 @srmane4444 [Same problem. Why halium needs java mka mkbootimg?], Java isnt used at all, if your getting an error for java or apk issues you have to comment or delete those lines in the vendor tree Oct 21 18:56:24 @rixchy [I apologize for this long text/spam. "./halium-install ~/halium/out/target/produ …], Does someone have any idea about this? I feel like the last line is an error, Oct 21 18:57:16 How big is your rootfs? What rootfs is it? And try to paste anything over 4 lines to a service like pastebin Oct 21 18:57:55 1. 1,2 GB. Plasma. Oct 21 18:58:11 Looks like it pushed both images to the device as normal Oct 21 18:58:16 Ok, does your device boot if you try it? Oct 21 18:58:26 Please wait, rebooting the device. Oct 21 18:59:13 @UniversalSuperBox [Looks like it pushed both images to the device as normal], Exactly what I was thinking, not sure on rootfs size though as I havent bothered with plasma in quite some time Oct 21 18:59:25 Nope. "KERNEL IS NOTSEANDROID ENFORCING". It is stuck there, and after turning on, bunch of drives mounted. Oct 21 18:59:37 Those are the tablet's drives. Oct 21 18:59:47 Your using hybris-boot right? Oct 21 18:59:50 Yup. Oct 21 19:00:00 Built after docs. Oct 21 19:00:29 Whats it say in dmesg on your dev machine while trying to boot the tablet? My note 4 takes 20 minutes to boot reference rootfs Oct 21 19:00:43 Ok. Oct 21 19:01:17 OKAYYYY. "[ 3222.361698] print_req_error: I/O error, dev sdb, sector 0 flags 801 … [ 3222.362138] print_req_error: I/O error, dev sdb, sector 0 flags 801 … [ 3222.362413] print_req_error: I/O error, dev sdb, sector 0 flags 801 … [ 3222.362594] print_req_error: I/O error, dev sdb, sector 0 flags 801 … [ 3222.366501] print_req_error: I/O err Oct 21 19:01:17 or, dev sdb, sector 0 flags 801 … [ 3222.374011] print_req_error: I/O error, dev sdb, sector 0 flags 801" Oct 21 19:01:21 What device are you porting? Oct 21 19:01:32 Chagalllte [Samsung Galaxy Tab S 10.5 LTE[ Oct 21 19:02:35 None of that dmesg is in reference to your tab, give it like 15 to 20 and see if anything changes, might even be able to just "dmesg | grep enp" Oct 21 19:03:25 Should I paste the whole thing for now into pastebin? Oct 21 19:04:36 I would say give it like 15 to 20 then try that command I sent and see if you get any results Oct 21 19:05:08 [Edit] I would say give it like 15 to 20 minutes then try that command I sent and see if you get any results Oct 21 19:05:34 Just in case here's the pastebin with commands before it booted. Just if you want to check it out. https://pastebin.com/QJ4FJStm Oct 21 19:07:56 Your getting this for a RNDIS device from what I can tell … enp0s20u2 … Is your device CAF by chance? Oct 21 19:08:34 @Shakendo [Your getting this for a RNDIS device from what I can tell … enp0s20u2 … Is your de …], No, because it runs on Exynos (ARM) processor. Oct 21 19:08:37 Or maybe. Oct 21 19:08:57 I think I am dumb. Oct 21 19:09:48 Ok, if its CAF that might be the reason you only get your bootlogo, I think Plasma lacks the files for that (I could be wrong) what is your end goal for your port? Plasma, UT, Lune, ...? Oct 21 19:10:03 @Shakendo [Ok, if its CAF that might be the reason you only get your bootlogo, I think Plas …], Ubuntu Touch. Oct 21 19:10:47 Ok, I would say if the reference rootfs boots and your android container starts now woukd be the time to start working towards UT Oct 21 19:10:58 But I couldn't find the files for my device because I think Exynos 5420 is 32 bit processor, and they post only 64 bit processor files. Oct 21 19:11:05 @Shakendo [Ok, I would say if the reference rootfs boots and your android container starts …], Okay. Oct 21 19:12:04 I set a timer for 20 minutes, 5 minutes ago. I know it is too late for now, but for now it is still stuck. If it doesn't work, then I am going to power it off and try the CMA later. Oct 21 19:12:12 *CAF Oct 21 19:12:36 [Edit] I set a timer for 20 minutes, 5 minutes ago. I know it is too late for now, but for now it is still stuck. If it doesn't work, then I am going to power it off and try the CAF tomorrow. Oct 21 19:13:10 With UT it doesnt matter, youll wanna use the 32-bit rootfs for now, 64-bit is still in development and works on some devices, you can build all the 64-bit pieces and itll work with the 32-bit rootfs, I myself am working on a port for a galaxy note 4 Oct 21 19:14:09 Cool. I have an iPhone, and I regret it!! I have so less freedom with my phone. Atleast I have my Android tablet. :( Oct 21 19:16:38 Yeah, I have a note 8 for my DD, I hate it but I need a stable device for work that has features UT doesnt offer as of my last time checking. I also have a tablet I should start working on Oct 21 19:17:54 I have an old phone and its bricked. lul. Recovery partition wont boot, stuck on android logo and locked bootloader, and I dont have adb on it. So that phone is a brick. Oct 21 19:18:03 Literal brick. Oct 21 19:20:40 Hmm, what kind of phone? Oct 21 19:20:56 Just5. You won't absoulutely know it. Oct 21 19:21:09 No download mode too. Oct 21 19:21:43 I know of it, no experience with it lol Oct 21 19:21:54 lul. Oct 21 19:22:12 enp0s20u2 I bet this is his tablet Oct 21 19:22:29 Tyger look in his last log Oct 21 19:23:04 Fwd from Shakendo: Your getting this for a RNDIS device from what I can tell … enp0s20u2 … Is your device CAF by chance? Oct 21 19:23:18 @srmane4444 [], To try to build halium-8.1 at least you need to install openjdk-8. I’m not In front of my pc at the moment, so I can’t answer precisely: using Tab, identify best pkg name Oct 21 19:23:28 His device is exynos Oct 21 19:23:38 @Akatsu . [His device is exynos], Yup. Oct 21 19:23:47 He can now attach device with script Oct 21 19:23:54 And then telnet or ssh Oct 21 19:24:04 Not sure which interface it is Oct 21 19:24:25 Well dmesg | grep enp isnt gonna show that Oct 21 19:24:33 Ok, it is been 20 mins. I am going to run dmesg. Oct 21 19:24:46 [Edit] Well "dmesg | grep enp" isnt gonna show that Oct 21 19:25:15 Here is the log. https://pastebin.com/CW68nTUR Oct 21 19:25:49 Still on Samsung logo, gonna try CAF rootfs tomorrow. Oct 21 19:26:16 New USB device found, idVendor=04f2, idProduct=b52b, bcdDevice=95.52 Oct 21 19:26:38 Caf rootfs is for Qualcomm based devices Oct 21 19:26:54 I understand that. Oct 21 19:27:07 Should I run just dmesg? Oct 21 19:27:07 Uh it's laptop? Oct 21 19:27:15 @Akatsu . [Uh it's laptop?], No. 😂 Oct 21 19:27:30 This id is from chicony Oct 21 19:27:46 I have a Webcam on my laptop from Chicony, Oct 21 19:27:53 It is interfering with logs..? Oct 21 19:27:56 Wot. Oct 21 19:28:01 Yea Oct 21 19:28:06 This what I pasted Oct 21 19:28:06 That is a lot of red. "[ 5943.916636] Buffer I/O error on dev sdb3, logical block 84, lost sync page write … [ 5943.916645] JBD2: Error -5 detected when updating journal superblock for sdb3-8. … [ 5943.916647] Aborting journal on device sdb3-8. … [ 5943.916650] Buffer I/O error on dev sdb3, logical block 84, lost sync page write … [ 5943.9 Oct 21 19:28:07 16653] JBD2: Error -5 detected when updating journal superblock for sdb3-8. … [ 5944.082159] Buffer I/O error on dev sdb16, logical block 52, lost sync page write … [ 5944.082168] JBD2: Error -5 detected when updating journal superblock for sdb16-8. … [ 5944.082170] Aborting journal on device sdb16-8. … [ 5944.082174] Buffer I/O error on dev sdb16, Oct 21 19:28:07 logical block 52, lost sync page write … [ 5944.082176] JBD2: Error -5 detected when updating journal superblock for sdb16-8." Oct 21 19:28:24 Does, that help? Oct 21 19:28:40 Please post long logs on paste.ubuntu.com or a similar service. This room is bridged to IRC and the bot murders IRC clients with long messages. :) Oct 21 19:29:00 Yeah, I am copying the logo to the paste bin now. :) Oct 21 19:29:39 @UniversalSuperBox how is ub on mainline? Also requires tons of patches to run? Oct 21 19:29:58 It's not the same as Ubuntu Touch on Halium just yet, but it's getting better every day Oct 21 19:30:04 I feel absolutely exhausted with halium and want to try run mainline kernel instead Oct 21 19:30:17 I have a feeling you'll have a much worse time that way Oct 21 19:30:22 Okay, here is the full log of dmesg https://pastebin.com/HHH8Zgm0 Oct 21 19:30:51 Sadly it's too hard to get it up Oct 21 19:30:55 Do you know which block device is `/dev/sdb3`? Oct 21 19:31:00 Do you have an SD card installed? Oct 21 19:31:04 If not this stupid modem I would have it fully working Oct 21 19:31:35 @UniversalSuperBox [Do you have an SD card installed?], No. Oct 21 19:31:45 Only 16 GB of internal. Oct 21 19:31:58 Or going to switch targets to le2 instead Oct 21 19:32:32 Wait, that's dmesg of your host system Oct 21 19:32:37 I think you have a failing hard drive Oct 21 19:32:41 But that's separate issue Oct 21 19:32:51 @UniversalSuperBox [Wait, that's dmesg of your host system], Ok. I am noob then. Oct 21 19:33:12 @UniversalSuperBox [I think you have a failing hard drive], I can't have a failing HD! I just changed my HDD to a SSD like a month ago! Oct 21 19:33:25 @UniversalSuperBox [But that's separate issue], But you are right. Oct 21 19:33:31 What is an output of lsusb? Oct 21 19:33:40 Reading back... Whatever you plugged in is presenting a "File-CD Gadget" Oct 21 19:34:23 Okay, I apologize, but I cannot continue today anymore. It is 11 in the evening for me. Oct 21 19:34:38 9pm for me Oct 21 19:34:41 Sorry for the inconvenience, but I will have to see you tomorrow. Oct 21 19:34:45 3pm for me Oct 21 19:34:49 That's okay. And whatever has become /dev/sdb is the problem, probably not your hard drive Oct 21 19:34:52 Good night Oct 21 19:34:58 @UniversalSuperBox [That's okay. And whatever has become /dev/sdb is the problem, probably not your …], Okay. Oct 21 19:35:05 @UniversalSuperBox [Good night], Good night. Oct 21 19:35:10 Could be a thumb drive maybe or a optical drive? Oct 21 19:36:00 Ok, tomorrow I change my target device Oct 21 19:36:30 Gonna switch to le2 Oct 21 19:36:56 Snap 652 3/32 fhd Oct 21 19:38:40 I do wonder what is main scope of halium? Build android image containing libhybris run it and use as proxy for Ubuntu to initialize and talk to rest devices? Oct 21 19:39:20 So all stuff like frame buffer, audio is executed by Android **** ENDING LOGGING AT Tue Oct 22 03:00:24 2019