**** BEGIN LOGGING AT Mon Jun 08 02:59:58 2020 Jun 08 07:38:42 does this look familiar to anyone? `mkdir: can't create directory '/root/halium-system': Read-only file system` Jun 08 07:39:16 (full log: https://paste.ubuntu.com/p/P2tdZpVz3C/) Jun 08 07:48:12 Fwd from NotKit: mount -o remount,rw / Jun 08 07:48:24 this happens in init Jun 08 07:48:48 and I can't access telnet Jun 08 07:52:25 more specifically, I have to flash `Halium-boot_no_console_patch` to get this far, otherwise there seem to be problems with rndis not working Jun 08 07:52:36 @atheris84 [does this look familiar to anyone? mkdir: can't create directory '/root/halium-s …], thats not fetal error, kernel shouldn't panic at first place Jun 08 07:54:13 `mkdir: can't create directory '/root/halium-system': Read-only file system … <12>[ 2.080045] [6: exe: 813] mount: mounting /halium-system on /root/halium-system failed: No such file or directory … <12>[ 2.085284] [6: init: 820] ln: /root/sbin/init: Read-only file system … <12>[ 2.085733] [6: Jun 08 07:54:13 init: 821] ln: /root/sbin/recovery: Read-only file system … <12>[ 2.085906] [7: init: 1] initrd: booting android... … <12>[ 2.085981] [7: init: 1] Begin: Running /scripts/local-bottom ... … <12>[ 2.086041] [7: init: 1] done. … <12>[ 2.086085] [7: init: 1] done. … <12>[ 2.0861 Jun 08 07:54:13 97] [7: init: 1] Begin: Running /scripts/nfs-bottom ... … <12>[ 2.086249] [7: init: 1] done. … <12>[ 2.086349] [7: init: 1] Begin: Running /scripts/init-bottom ... … <12>[ 2.091603] [7: init: 1] done. … <12>[ 2.092256] [7: exe: 828] mount: mounting /run on /root/run Jun 08 07:54:13 failed: No such file or directory … <12>[ 2.093009] [6: run-init: 829] run-init: /sbin/init: No such file or directory … <12>[ 2.093126] [7: init: 1] Target filesystem doesn't have requested /sbin/init. … <12>[ 2.093753] [7: run-init: 830] run-init: /sbin/init: No such file or directory … <12>[ 2.094974] [ Jun 08 07:54:13 6: run-init: 831] run-init: /etc/init: Permission denied … <12>[ 2.095939] [7: run-init: 832] run-init: /bin/init: No such file or directory … <2>[ 2.127094] [7: sh: 1] sec_debug_set_extra_info_fault = PANIC / 0xffffff80080fa0f4 … <0>[ 2.127113] [7: sh: 1] Kernel panic - not syncing: Attempted Jun 08 07:54:13 to kill init!` Jun 08 07:54:42 it seems to be enough to kill init Jun 08 07:55:43 Having said that, it didn't panic previously, just sat there not working. Wiping and reinstalling it panics now Jun 08 07:59:20 @kdrag0n [It's probably similar to the issue on my kernel (IPA init fail: ipa ipa3_uc_reg_ …], This error could NOT be possibly the main reason for ipa failure. The same error happens for me in Ubports and lineage 16. But the ipa initializes and wifi works. Jun 08 08:00:19 @joelselvaraj [This error could NOT be possibly the main reason for ipa failure. The same error …], Right, I took a quick look through my old logs+code again and it looks like the issue is because icnss probe is failing Jun 08 08:00:36 Ipa3 error is indeed normal because of how qcacld checks for IPA Jun 08 08:00:50 @atheris84 [Having said that, it didn't panic previously, just sat there not working. Wiping …], do you have gsi installed? or just halium-boot? Jun 08 08:01:05 Both Jun 08 08:02:23 no idea, as i can see in the logs both rootfs and android system is mounted (loop1 and 0) Jun 08 08:02:44 @kdrag0n [Right, I took a quick look through my old logs+code again and it looks like the …], That's great news! Now we at least know what's the issue. Jun 08 08:12:46 okok, calm down. Jun 08 08:13:00 looks like you have to edit the fstab Jun 08 08:16:33 hans_: fstab isn't used at this stage of boot Jun 08 08:21:52 so I assume, that it is the bootloader, which has mounted the file system to only load the kernel. Jun 08 08:25:08 no, problem is "initrd: boot mode: android" Jun 08 08:25:15 should be "initrd: boot mode: halium" Jun 08 08:27:41 ah Jun 08 08:28:01 @atheris84 [(full log: https://paste.ubuntu.com/p/P2tdZpVz3C/)], "androidboot.mode=charger" … it's trying to boot to off-mode charging Jun 08 08:28:32 hold power button to turn it on.. Jun 08 08:28:37 @erfanoabdi ["androidboot.mode=charger" … it's trying to boot to off-mode charging], hello Jun 08 08:29:08 @KernelPanix [hello], 👋 Jun 08 08:29:16 (Document) https://irc.ubports.com/B4VDKHaQ.txt Jun 08 08:29:20 @erfanoabdi [👋], yes Jun 08 08:29:29 log camera GSI v7 Jun 08 08:29:31 for me Jun 08 08:29:40 get logcat Jun 08 08:29:50 @KernelPanix [], this log Jun 08 08:30:02 this is kernel log Jun 08 08:30:12 @KernelPanix [this log], Seems init killing Jun 08 08:30:13 @erfanoabdi [sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/l …], ^ Jun 08 08:30:15 (Sticker, 512x512) https://irc.ubports.com/nJvqKibG.webp Jun 08 08:30:55 @erfanoabdi [this is kernel log], i use … sudo -s … dmesg | grep -i audio > /var/log/camera.txt Jun 08 08:31:04 ? how u get local Jun 08 08:31:05 ? Jun 08 08:31:11 `sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/logcat` Jun 08 08:31:38 so you ahve to rebeuil the rd? Jun 08 08:31:42 @erfanoabdi [sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/l …], okay u Jun 08 08:32:46 hans_: no his log was from off-mode charging, as mode reported from kernel cmdline Jun 08 08:33:07 so halium rd was trying to boot to android, instead of rootfs Jun 08 08:35:02 I was not referring to this specified log. Jun 08 08:35:26 @erfanoabdi [so halium rd was trying to boot to android, instead of rootfs], ah, and GPS Not Works Jun 08 08:35:33 I was referring to your message, the problem would be the boot mode set to android rather than halium Jun 08 08:37:33 I don't know the details of the early android device boot mechanisms, but I assume that the boot mode must be variable and set by the hardware (i.e. ROM of the device) dependant on the way, the phone is turned on (e.g. by user pressing volume button or some space in some memory, which had been set before shutdown). Jun 08 08:38:54 You can tell me to be quiet, I do not want to waste your time. I am fairly new to Halium, but I am keen to get to know it, that is why I am spending my time on the irc channel. Jun 08 08:38:56 https://github.com/Halium/initramfs-tools-halium/blob/halium/scripts/halium#L42 Jun 08 08:39:07 thanks! Jun 08 08:39:41 oh no, i'm new to this stage of halium boot too ;) Jun 08 08:40:32 @KernelPanix [ah, and GPS Not Works], GPS works if u go outside and wait for it to get location fixed lol (took ~7min) Jun 08 08:41:22 (Sticker, 512x507) https://irc.ubports.com/iFB3G3Mp.webp Jun 08 08:41:24 thanks u Jun 08 08:42:59 erfanoabdi: line 31/32 seem to explain my question. Jun 08 08:44:02 doesn't look difficult to debug, if you haven't solved it already Jun 08 08:45:06 yeah i might try again today, need to rebuild los16 with better vendor and rebase/cleanup kernel Jun 08 08:47:17 erfanoabdi: can you suggest me an entrance point for a documentation? I am searching the official Halium page at the moment, but it seems pretty outdated to me. I am still flying around in my Openmoko dream world and I know that software basis's change quite quickly on this field Jun 08 08:48:41 Marco was added by: Marco Jun 08 08:49:16 But I am very interested in the topic. E.g. I wonder why to use a fat Lineage distro is the basis. Is it so difficult to extract the blobs and start with a simple linux with nothing but an ssh server? I do not see the point. To be honest, of course, I do not know yet the details of android's way to handle I/O, so for instance i don't know if and how I can use the framebuffer. Jun 08 08:52:39 Hi, I have a Samsung Galaxy A5 2015 with 2GB of ram and 12GB of expandable storage, can I still install halium? Jun 08 08:53:13 12 gb is probably the storage available to the user Jun 08 08:53:24 should be 16 gb Jun 08 08:53:26 so yes Jun 08 08:53:29 @Marco [Hi, I have a Samsung Galaxy A5 2015 with 2GB of ram and 12GB of expandable stora …], U can Boot LineageOS 16 ? Jun 08 09:04:46 I'm checking now, there are a fee steps to install it on model SM-A500FU but i think it's possible Jun 08 09:10:19 @Marco [I'm checking now, there are a fee steps to install it on model SM-A500FU but i t …], U Can Use LineageOS 16 Jun 08 09:10:21 ? Jun 08 09:10:28 I Mean Booted ? Jun 08 09:20:30 Can anybody explain to me, why nobody is using Debian in the smartpone world? What prevents me from debootstrapping my kde plasma system on my pc and then quickly flash it to my smartphone? What do I need OpenEmbedded and all that stuff for, it seems to be useless to me, introducing many unneccessary tools and standards, for which there are pre-existing alternatives? Jun 08 09:21:09 Once I have Halium running, this should be the number one way to go for me, shouldn't it? Jun 08 09:21:55 (Photo, 725x395) https://irc.ubports.com/dSOVVtj1.png Can somebody please tell me what exactly do I need to set in here? Jun 08 09:23:29 Make sure your Android Kernel Source defconfig can use with Halium. Jun 08 09:23:54 @commandyourstyle [Make sure your Android Kernel Source defconfig can use with Halium.], That's what I was afraid of.. Jun 08 09:24:00 I have no idea what does it mean :/ Jun 08 09:24:19 Just check it... let me bring up an example... Jun 08 09:25:54 `Allowed values : y` … For now if I see something with this below, I'm inserting CONFIG_*=y to config file.. But I'm not sure if it should be done like this Jun 08 09:27:08 And I've just saw this: … `WARNING: CONFIG_AUDIT is invalid … Value is: y … Allowed values : n, !` Jun 08 09:27:11 [Edit] And I've just saw this: … ```WARNING: CONFIG_AUDIT is invalid … Value is: y … Allowed values : n, !``` Jun 08 09:27:24 and it means what I should change CONFIG_AUDIT to n? Jun 08 09:28:43 (Photo, 942x576) https://irc.ubports.com/EgbsDSK7.png Jun 08 09:29:10 halium/halium-boot/check-kernel-config [your defconfig] -w Jun 08 09:29:45 it can fix usually thing in your defconfig Jun 08 09:30:12 but be careful with the apparmor item... Jun 08 09:30:19 @mrcyjanek [and it means what I should change CONFIG_AUDIT to n?], U Build Halium ? huh Jun 08 09:30:29 @KernelPanix [U Build Halium ? huh], Yeah Jun 08 09:30:38 @mrcyjanek [Yeah], use Check Kernel Jun 08 09:30:39 finally... I have a Galaxy J6+ XD Jun 08 09:30:44 @commandyourstyle [halium/halium-boot/check-kernel-config [your defconfig] -w], o.. okay Jun 08 09:30:45 thanks Jun 08 09:30:53 @mrcyjanek [thanks], This auto Create Kernel Config Jun 08 09:30:58 And Read Docs Jun 08 09:31:02 (Sticker, 512x507) https://irc.ubports.com/Mivo0aGj.webp Jun 08 09:31:39 but the 64GB variant is very... rare... recovery image can't use for it... so tricky...XD Jun 08 09:32:42 is it required for both halium-boot checker & mer-kernel-checker for defconfig charging? Jun 08 09:54:04 `[ 28% 2/7] Building Kernel` i hate this part of compiling halium, I'm suffering in silence. Jun 08 09:55:06 good luck for you Jun 08 10:00:39 @commandyourstyle [good luck for you], Thanks Jun 08 10:04:35 Damn, I'm still stuck in bootloop :( Jun 08 10:05:20 Nothing shows in dmesg :/ Jun 08 10:06:37 which device/Android version? Jun 08 10:07:39 hans_, regarding your questions, booting Linux with SSH server is fairly simple and doesn't require Android bits Jun 08 10:07:49 [Edit] which device/kernel version? Jun 08 10:09:04 the problems start when you need to use 3D acceleration, modem, camera and so on - just extracting blobs is not enough, as those usually have complicated initialization sequence and expect Android environment to work with Jun 08 10:32:00 @NotKit [which device/kernel version?], OnePlus 6t kernel 4.9 Jun 08 10:33:11 @mrcyjanek [Damn, I'm still stuck in bootloop :(], so what happens? is it stuck on logo or reboots? Jun 08 10:33:38 @NotKit [so what happens? is it stuck on logo or reboots?], It's stuck on "This device is unsafe" logo and after about a minute reboots Jun 08 10:33:58 probably it failed to setup USB network Jun 08 10:34:15 did you disable QCNRNDIS and enable CONFIGFS_RNDIS? Jun 08 10:35:04 @NotKit [did you disable QCNRNDIS and enable CONFIGFS_RNDIS?], In kernel config? Jun 08 10:35:06 [ "QCNRNDIS" not found ] Jun 08 10:36:00 @NotKit [did you disable QCNRNDIS and enable CONFIGFS_RNDIS?], And to the second one, CONFIG_RNDIS_IPA=y was in default CONFIGFS_RNDIS is not found in that file Jun 08 10:36:35 (Document) https://irc.ubports.com/oV8l6MHF.txt Jun 08 10:36:46 Also this is the result or mer kernel config check Jun 08 10:37:11 I've ran it with -w flag, few times, but still a lot remains invalid Jun 08 10:37:47 ```CONFIG_FHANDLE=y … CONFIG_SYSFS=y … CONFIG_SIGNALFD=y … CONFIG_EPOLL=y … CONFIG_CGROUP_DEVICE=y … CONFIG_PROC_FS=y … CONFIG_AUDIT=y … CONFIG_MEMCG_SWAP=y … CONFIG_FANOTIFY=y … CONFIG_CGROUPS=y … CONFIG_INOTIFY_USER=y … CONFIG_DEVTMPFS=y … CONFIG_TIMERFD=y … CONFIG_AUDIT=n``` Jun 08 10:37:53 And this is what I've added manually Jun 08 10:38:24 @mrcyjanek [Also this is the result or mer kernel config check], mer? Jun 08 10:38:46 mer_verify_kernel_config Jun 08 10:39:11 [Edit] ```CONFIG_FHANDLE=y … CONFIG_SYSFS=y … CONFIG_SIGNALFD=y … CONFIG_EPOLL=y … CONFIG_CGROUP_DEVICE=y … CONFIG_PROC_FS=y … CONFIG_MEMCG_SWAP=y … CONFIG_FANOTIFY=y … CONFIG_CGROUPS=y … CONFIG_INOTIFY_USER=y … CONFIG_DEVTMPFS=y … CONFIG_TIMERFD=y … CONFIG_AUDIT=n``` Jun 08 10:39:17 don't use it, use halium-boot/check-kernel-config Jun 08 10:39:22 O... Jun 08 10:39:23 Okay Jun 08 10:39:34 should I reset config file to defaults? Jun 08 10:39:48 mer_verify_kernel_config doesn't modify config by itself Jun 08 10:39:55 @NotKit [mer_verify_kernel_config doesn't modify config by itself], Even with -w flag? Jun 08 10:40:07 it doesn't have support for that flag Jun 08 10:40:17 but remove ```CONFIG_AUDIT=n``` from your changes Jun 08 10:40:53 @NotKit [but remove CONFIG_AUDIT=n from your changes], Ok Jun 08 10:40:56 @NotKit [it doesn't have support for that flag], oh...... Jun 08 10:41:05 Config file checked, found 276 errors that I did not fix. Jun 08 10:41:12 So I know what to do, I guess Jun 08 10:44:26 ** is neither enabled nor disabled in config file - it means that I should enable it..? Jun 08 10:44:42 or google what does it do, and decide on my own? Jun 08 10:46:04 @KernelPanix [I Mean Booted ?], I only rooted the phone, I'm not using custom rom Jun 08 10:48:46 @Marco [I only rooted the phone, I'm not using custom rom], Flash Yes U Need LineageOS 16 + halium Boot Jun 08 10:50:43 (Photo, 720x1280) https://irc.ubports.com/20fttlme.png Jun 08 10:51:18 What does it mean? Jun 08 10:56:53 @Marco [], Are you sure this for yourspecified device ? Jun 08 10:58:12 The site says that is compatible with all SM-A500 variants Jun 08 10:58:49 @Marco [], You can unzip that file, and there will be a shell script that verify if your device is compatible - you can edit it Jun 08 10:59:14 @Marco [], Happened to me when using wrong twrp version Jun 08 11:00:49 @mrcyjanek [You can unzip that file, and there will be a shell script that verify if your de …], "ro.product.model=SM-A500FU" … Wich is mine Jun 08 11:01:07 @Marco ["ro.product.model=SM-A500FU" … Wich is mine], no Jun 08 11:01:11 code name Jun 08 11:02:13 samsung-a5ulte, samsung-a5lte ?! Jun 08 11:02:59 @KernelPanix [code name], "ro.build.version.codename=REL" Jun 08 11:03:20 :( Jun 08 11:03:23 A500FU should be a5ulte... yes... Jun 08 11:03:25 @Marco ["ro.build.version.codename=REL"], delete line this Jun 08 11:03:30 U not need Jun 08 11:03:37 I like u delete this Jun 08 11:03:41 @commandyourstyle [samsung-a5ulte, samsung-a5lte ?!], Yes Jun 08 11:03:56 @KernelPanix [I like u delete this], I'll try Jun 08 11:03:57 @Marco [Yes], u can delete this Jun 08 11:04:03 @Marco [I'll try], Works 100% Jun 08 11:05:20 (Photo, 1004x1280) https://irc.ubports.com/UUqSDevB.png Use this twrp Jun 08 11:05:56 Ok Jun 08 11:09:30 (Photo, 720x1280) https://irc.ubports.com/OU0XjBDh.png Is working!!!! Jun 08 11:10:08 @Marco [], delete line or Use Other Twrp ? Jun 08 11:10:45 Both Jun 08 11:10:49 @Marco [], wait booted Jun 08 11:13:33 After reboot there was the lineage symbol and now black scree.. Jun 08 11:13:46 Screen* Jun 08 11:17:10 My pc see the device in "adb devicesl Jun 08 11:21:57 (Video, 2s) https://irc.ubports.com/f1Res50v.mp4 Doing nothing Jun 08 11:22:28 @Marco [], wait booted Jun 08 11:22:42 Ok Jun 08 11:23:02 @Marco [Ok], and Jun 08 11:23:08 so A5 2015 can build with halium-9? Jun 08 11:23:11 U Need 1 PC Or Laptop Or VPS Jun 08 11:23:30 Running Ubuntu 64Bit ( I Like Ubuntu 18.04 ) Jun 08 11:23:32 (Sticker, 512x507) https://irc.ubports.com/nsZ3EgR5.webp Jun 08 11:25:25 @KernelPanix [and], Still loading Jun 08 11:25:50 first boot need 10~15 min Jun 08 11:26:12 I wish Jun 08 11:26:59 @commandyourstyle [first boot need 10~15 min], i like mean u Jun 08 11:27:00 (Sticker, 512x507) https://irc.ubports.com/bdFdnZ30.webp Jun 08 11:27:08 If it takes more, try formatting data and then reboot Jun 08 11:27:25 Wipe All Jun 08 11:27:28 Flash Agan Jun 08 11:30:30 @aribk how is your 7.1 port coming along? Friend mine would like to try Jun 08 11:32:05 SerialNumber: GNU/Linux Device on rndis0 10.15.19.82 Jun 08 11:32:22 :DDD Jun 08 11:32:23 @mrcyjanek [SerialNumber: GNU/Linux Device on rndis0 10.15.19.82], you should be able to SSH in Jun 08 11:32:29 @NotKit [you should be able to SSH in], Ouck Jun 08 11:32:30 @NotKit [you should be able to SSH in], [Edit] Ouch Jun 08 11:32:33 it keeps rebooting Jun 08 11:33:20 Should I regflash ubports GSI? Jun 08 11:34:15 need logs on why does it reboot Jun 08 11:34:28 did it display anything? Jun 08 11:34:33 [ 4.901834] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory Jun 08 11:34:39 @NotKit [need logs on why does it reboot], It rebooted once actually Jun 08 11:34:48 I've got ssh access Jun 08 11:35:07 probably i need to update udev rules Jun 08 11:36:26 ```root@ubuntu-phablet:/vendor# ls … lost+found``` Jun 08 11:36:29 Ouchhhhh Jun 08 11:38:16 @mrcyjanek [root@ubuntu-phablet:/vendor# ls … lost+found], are u using lineage-16 kernel? Jun 08 11:38:22 @erfanoabdi [are u using lineage-16 kernel?], Yeah Jun 08 11:39:36 ```root@ubuntu-phablet:/etc/udev/rules.d# ls … 50-firmware.rules 60-persistent-v4l.rules 70-fajita.rules 70-ubport.rules 90-alsa-restore.rules 90-alsa-ucm.rules``` Jun 08 11:40:03 So I'm rebooting it Jun 08 11:40:36 ```phablet@ubuntu-phablet:~$ sudo su … sudo: su: command not found``` Jun 08 11:40:38 Is it normal? Jun 08 11:41:09 And also, is this the moment where I should go to ubports porting group or this is still halium thing? Jun 08 11:43:08 ```phablet@ubuntu-phablet:~$ test_hwc2 … failed to get hwcomposer service … Aborted … phablet@ubuntu-phablet:~$ test_hwcomposer … test_hwcomposer: test_hwcomposer.cpp:174: int main(int, char**): Assertion `err == 0' failed. … Aborted … phablet@ubuntu-phablet:~``` Jun 08 11:43:41 The Test is not part of the ubports rootfs Jun 08 11:43:45 @KernelPanix [Flash Agan], It reboots in twrp mode, now i'll try Jun 08 11:43:55 And the above is normal Jun 08 11:44:08 @anpok [And the above is normal], Okay Jun 08 11:44:15 @anpok [The Test is not part of the ubports rootfs], Oh, ok Jun 08 11:44:32 So what am I supposed to do..? Jun 08 11:44:50 But having ssh is great -- ship it! Jun 08 11:45:11 Yea ;D Jun 08 11:45:24 [Edit] @aribk how is your 7.1 port coming along? A Friend of mine would like to try. Jun 08 11:47:49 (Photo, 720x1280) https://irc.ubports.com/t29rqK02.png Finally Jun 08 11:50:22 @Marco [], okay Jun 08 11:50:29 (I've lost ssh) Jun 08 11:50:46 @Marco [], okay Jun 08 11:51:01 Now Inbox Private For Me Jun 08 11:53:58 Thank you all for help Jun 08 11:54:17 Guys anyone working on the volla phone here? Jun 08 11:54:25 ?! not halium? XD Jun 08 12:08:21 @YouPaintMyLove [Guys anyone working on the volla phone here?], I am Jun 08 12:09:05 @mrcyjanek [root@ubuntu-phablet:/vendor# ls … lost+found], investigate why /vendor fails to mount first Jun 08 12:09:13 rest won't work until that is fixed Jun 08 12:09:18 Okay Jun 08 12:09:50 I've also managed to grab dmesg http://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Fssh_fail_ubports.txt Jun 08 12:10:04 https://github.com/erfanoabdi/rootfs-builder-debos-android9/blob/android9/android9/overlay/var/lib/lxc/android/mount-android.sh Jun 08 12:11:53 @NotKit [I am], Sir can I ask for its status on Ubuntu Touch? Jun 08 12:12:02 @NotKit [https://github.com/erfanoabdi/rootfs-builder-debos-android9/blob/android9/androi …], Should I run it on the ubtouch? Jun 08 12:12:21 I just pointed you to the code that attempts to mount vendor Jun 08 12:13:03 @NotKit [I just pointed you to the code that attempts to mount vendor], Okay, but it should be run from inside of lxc? Jun 08 12:13:18 No Jun 08 12:13:19 wait Jun 08 12:13:33 it is executed and it doesn't work and I need to figure out why Jun 08 12:13:56 @YouPaintMyLove [Sir can I ask for its status on Ubuntu Touch?], most of basic phone features are working. Current task is integrating it with UBPorts system-image-server for receiving OTAs Jun 08 12:14:13 @mrcyjanek [it is executed and it doesn't work and I need to figure out why], right Jun 08 12:14:40 (Photo, 528x763) https://irc.ubports.com/U5xpMe26.png Jun 08 12:14:42 (but I hope you didn't wipe vendor partition when flashing GSI, because lost+found means it is mounted but empty) Jun 08 12:14:54 [Edit] (but I hope you didn't wipe vendor partition when flashing GSI, because having lost+found folder means it is mounted but empty) Jun 08 12:15:28 @NotKit [(but I hope you didn't wipe vendor partition when flashing GSI, because having l …], (I'm not sure... I'll reflash oxygenos, wipe everything except vendor and flash halium-boot and then ubports gsi) Jun 08 12:16:21 @NotKit [most of basic phone features are working. Current task is integrating it with UB …], Thats amazing sir. So does Volla Phone uses native or halium hybris?? Jun 08 12:16:35 Halium/hybris Jun 08 12:17:34 @NotKit [Halium/hybris], Thanks for the info sir. Jun 08 12:19:20 I have a question, can I use vendor partition from android10? Jun 08 12:19:40 because I couldn't find stock android 9 rom anywhere Jun 08 12:19:45 @mrcyjanek [I have a question, can I use vendor partition from android10?], no Jun 08 12:19:50 oh no Jun 08 12:20:04 look at XDA or 4PDA Jun 08 12:21:00 https://otafsg1.h2os.com/patch/amazone2/GLO/OnePlus6TOxygen/OnePlus6TOxygen_34.O.24_GLO_024_1909112343/OnePlus6TOxygen_34_OTA_024_all_1909112343_d5b1905.zip Jun 08 12:21:33 @NotKit [https://otafsg1.h2os.com/patch/amazone2/GLO/OnePlus6TOxygen/OnePlus6TOxygen_34.O …], <3 thanks Jun 08 12:21:35 https://androidfilehost.com/?fid=4349826312261679320 Jun 08 12:22:28 (Photo, 645x225) https://irc.ubports.com/ewn78vXV.png Jun 08 12:22:32 well... Jun 08 12:22:37 But I'll figure it out Jun 08 13:47:27 ```phablet@ubuntu-phablet:/vendor$ ls … lost+found``` Jun 08 13:47:29 [Edit] ```phablet@ubuntu-phablet:/vendor$ ls … lost+found``` Jun 08 13:47:48 no matter what I do it's still like this Jun 08 13:48:46 Copying /vendor and pasting it there won't work right? Jun 08 13:49:08 flashed v7 gsi? Jun 08 13:49:13 @erfanoabdi [flashed v7 gsi?], Yes Jun 08 13:49:51 do u have anything in this path : `/sys/firmware/devicetree/base/firmware/android/fstab/vendor` Jun 08 13:50:32 ```phablet@ubuntu-phablet:/vendor$ ls /sys/firmware/devicetree/base/firmware/android/fstab/vendor … compatible dev fsmgr_flags mnt_flags name type``` Jun 08 13:51:06 sudo -s … /var/lib/lxc/android/mount-android.sh Jun 08 13:51:39 ```root@ubuntu-phablet:/android/vendor# /var/lib/lxc/android/mount-android.sh … A/B slot system detected! Slot suffix is _a … checking for vendor mount point … mounting /dev/disk/by-partlabel/vendor_a as /vendor … mount: /dev/sde16 is already mounted or /android/vendor busy … /dev/sde16 is already mounted on /android/vendor … ls: Jun 08 13:51:40 cannot access '/vendor/etc/fstab*': No such file or directory … fstab not found``` Jun 08 13:52:31 `mount` Jun 08 13:53:32 @erfanoabdi [mount], https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Fmount.txt Jun 08 13:54:11 so /android/vendor is mounted but u can't see any file on it? Jun 08 13:54:36 didn't u wipe it on twrp? Jun 08 13:54:49 I didn't Jun 08 13:55:12 looks like the partition is empty itself! Jun 08 13:55:28 try to flash stock 9 vendor on the partition again using fastboot Jun 08 13:55:40 @erfanoabdi [looks like the partition is empty itself!], I have full backup of stock rom i think.. Jun 08 13:55:56 @erfanoabdi [try to flash stock 9 vendor on the partition again using fastboot], will do Jun 08 14:18:02 I SAW UBUNTU TOUCH LOGO!!!! Jun 08 14:18:26 So now I should update udev rules right? Jun 08 14:24:50 Yup, i had to - but I've ran over other issues :/ I'll try to figure them out Jun 08 14:47:24 https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Fstuck_at_boot_animation.txt Jun 08 14:47:56 Does anybody have any idea what to do if I'm at stuck at ubuntu touch boot animation? Jun 08 14:49:52 ```[ 2.611150] Begin: Running /scripts/init-bottom ... … [ 2.619370] run-init: /init: No such file or directory … [ 2.619467] Target filesystem doesn't have requested /init.``` Jun 08 14:50:10 I'm think that this could cause some problems... Jun 08 14:50:13 [Edit] I think that this could cause some problems... Jun 08 15:13:01 @erfanoabdi [sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/l …], ^ get this Jun 08 15:13:26 ok Jun 08 15:15:46 @erfanoabdi [sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/l …], https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Flogcat.txt&raw=true Jun 08 15:16:48 Not sure if it's all because I see that it begins at 22 second Jun 08 15:18:19 I'm thinking about reflashing it.. because I've dirty-flashed it on the old oxygen os Jun 08 15:31:31 Ok... I've managed to get into the Language picking screen but touch screen is refusing to work 😐 Jun 08 15:31:38 (it doesn't work at all) Jun 08 15:38:18 I'll try this patch Jun 08 15:38:18 Fwd from kalube: Here's my working halium kernel https://github.com/ubports-enchilada/android_kernel_oneplus_sdm845 Jun 08 15:49:55 ohno Jun 08 15:50:01 wifi is not working :( Jun 08 15:53:24 Well at least it booted Jun 08 15:53:28 and logged in Jun 08 17:09:51 robante15 was added by: robante15 Jun 08 18:30:36 @mrcyjanek [Here's my working halium kernel https://github.com/ubports-enchilada/android_ker …], Sorry for tagging @kalube, but I'd like to know if this kernel worked, like if wifi, calling, bluetooth was working Jun 08 18:37:25 HI. Small question. I'm manually building kernel(system.img and halium-boot.img). And now trying to add gsi. Already applied some patches to kernel and built them successfully. Am i right understand the sequence of uploading gsi and images? … 1) twrp - clean data … 2) bootloader - flash halium boot … 3) twrp - install GSI … 4) host - Jun 08 18:37:26 do ./halium-install with system.img and UT rootfs … 5) install enabling apparmor … 6) install ramdisk … 7) reboot device with right partition Jun 08 18:45:40 @mrcyjanek [Sorry for tagging @kalube, but I'd like to know if this kernel worked, like if w …], hey no problem, WiFi works on the OnePlus 5 but the same changes don't fix it for me, android side never initialises it after loading the kernel module. ril is broken, no IMEI. the screen is stuck at full brightness and you can't lock the phone Jun 08 18:46:07 @kalube [hey no problem, WiFi works on the OnePlus 5 but the same changes don't fix it fo …], Yup, same happened to me. Jun 08 18:47:20 if anyone has an op6 and can look into it that would be amazing! I've been mostly working on postmarketos mainline and aiming to get that going instead - there's some work on running ubports on postmarketos but it's a fair way off. I also tried booting a mainline ubports rootfs but there's an issue with graphics that makes lightdm fail Jun 08 18:48:28 @kalube [if anyone has an op6 and can look into it that would be amazing! I've been mostl …], I've oneplus 6t, and I'm using your kernel it works as you described Jun 08 18:49:49 @mrcyjanek definitely let me know if you get wifi working or fix display stuff. Building a custom system image might be the way to go... Jun 08 18:49:59 @kalube [@mrcyjanek definitely let me know if you get wifi working or fix display stuff. …], oh no.. Jun 08 18:50:05 so I should not use GSI? Jun 08 18:51:10 @mrcyjanek no idea, GSI is /generic/ so if you build you're own you'll have a proper understanding of device specific quirks. I honestly don't know much at all about halium Jun 08 18:51:28 @kalube [@mrcyjanek no idea, GSI is /generic/ so if you build you're own you'll have a pr …], I don't know much about it too :/ Jun 08 18:52:24 [Edit] @mrcyjanek no idea, GSI is /generic/ so if you build your own you'll have a proper understanding of device specific quirks. I honestly don't know much at all about halium Jun 08 18:52:26 in ubports u have more luck with gsi cuz everything is generic Jun 08 18:53:00 @erfanoabdi [in ubports u have more luck with gsi cuz everything is generic], then why it doesn't work :/ Jun 08 18:53:06 bad vendor Jun 08 18:53:08 @kalube [@mrcyjanek definitely let me know if you get wifi working or fix display stuff. …], have you tested it with another rom? Jun 08 18:53:14 @erfanoabdi [bad vendor], It's stock Jun 08 18:53:40 @erfanoabdi [bad vendor], I've tried booting on top of OOS 9 and LOS 16 with no luck Jun 08 18:53:48 Sailfish OS works with the same LOS image Jun 08 18:53:57 @kalube [Sailfish OS works with the same LOS image], with calls and stuff? Jun 08 18:54:00 los 16 is using stock vendor too on 6t Jun 08 18:54:08 @mrcyjanek [with calls and stuff?], yeah :D Jun 08 18:54:20 @kalube [yeah :D], So I guess it's problem with ubport image Jun 08 18:54:24 because kernel was the same? Jun 08 18:54:28 @erfanoabdi [los 16 is using stock vendor too on 6t], How should one go about debugging and fixing vendor quirks? Jun 08 18:54:40 @mrcyjanek [So I guess it's problem with ubport image], not necessarily Jun 08 18:54:52 @kalube [How should one go about debugging and fixing vendor quirks?], check logcat and see why services crashing Jun 08 18:54:59 @erfanoabdi Once the UBports GSI is more stable, will you work on making GSIs of more Halium UIs. Jun 08 18:55:01 [Edit] @erfanoabdi Once the UBports GSI is more stable, will you work on making GSIs of more Halium UIs? Jun 08 18:55:08 [Edit] @erfanoabdi Once the UBports GSI is more stable, will you work on making GSIs of more Halium systems? Jun 08 18:55:30 @mintphin [@erfanoabdi Once the UBports GSI is more stable, will you work on making GSIs of …], more halium systems? Jun 08 18:55:33 Like libhybris pmOS or Plasma Mobile? Jun 08 18:55:34 @erfanoabdi [check logcat and see why services crashing], @mrcyjanek the GSI expects vendor config files and such to be in specific places, if for some reason they aren't then that could cause issues Jun 08 18:56:06 @mintphin [Like libhybris pmOS or Plasma Mobile?], they aren't compatible with 9 yet, too much work Jun 08 18:56:08 @mintphin [Like libhybris pmOS or Plasma Mobile?], libhybris pmos is not generic Jun 08 18:56:15 @kalube [@mrcyjanek the GSI expects vendor config files and such to be in specific places …], hm... Jun 08 18:56:16 Oh. Jun 08 18:56:22 well actually, might be Jun 08 18:56:22 @mrcyjanek [hm...], I have no idea what to do.. Jun 08 18:56:30 but eh, doesn't seem worth to me Jun 08 18:56:33 Just mainline kek Jun 08 18:56:45 whats 6t bugs now? Jun 08 18:57:17 @erfanoabdi [whats 6t bugs now?], on 6 at least, wifi still broken (I've applied the same fixes that work on cheeseburger), no RIL and screen stuck on at full brightness Jun 08 18:57:23 Fwd from kalube: hey no problem, WiFi works on the OnePlus 5 but the same changes don't fix it for me, android side never initialises it after loading the kernel module. ril is broken, no IMEI. the screen is stuck at full brightness and you can't lock the phone Jun 08 18:58:21 cam? Jun 08 18:58:25 Also broken Jun 08 18:58:37 Haven't looked much into it beyond installing the extra package on GSI 4 Jun 08 18:58:48 Wanted to fix wifi at least first Jun 08 18:59:12 cam works on sailfish? Jun 08 18:59:15 yeah Jun 08 18:59:28 Literally everything works on libhybris Jun 08 18:59:32 [Edit] Literally everything works on libhybris/sailfish Jun 08 19:00:07 Perhaps similar sparse files are needed? But I didn't need to do much in the end for wifi Jun 08 19:00:30 @kalube [Wanted to fix wifi at least first], wifi, display and phone is priority for me Jun 08 19:00:36 rest may remain broken lol Jun 08 19:00:39 https://github.com/sailfish-oneplus6/droid-config-enchilada if this offers any insight Jun 08 19:00:40 i can help with other stuffs but no wifi Jun 08 19:00:54 @erfanoabdi [i can help with other stuffs but no wifi], Like display and phone? Jun 08 19:01:46 yeah Jun 08 19:01:56 @erfanoabdi [yeah], That would be cool Jun 08 19:02:19 my 6t will arrive soon in this days.. Jun 08 19:02:47 @erfanoabdi [my 6t will arrive soon in this days..], That cool Jun 08 19:02:48 @erfanoabdi [my 6t will arrive soon in this days..], Oh awesome man Jun 08 19:03:08 @erfanoabdi do you plan on looking into postmarketos / mainline? Jun 08 19:03:16 nope Jun 08 19:03:39 haha understandable, will be awesome to have better halium support Jun 08 19:03:43 did u patch anything for camera? Jun 08 19:03:53 @erfanoabdi [did u patch anything for camera?], for sailfish?\ Jun 08 19:03:57 yeah Jun 08 19:04:04 "Waiting for service 'sensorservice' on '/dev/binder'..." is coming from cam? Jun 08 19:05:12 iirc only the jolla camera app config Jun 08 19:05:33 @kalube [https://github.com/sailfish-oneplus6/droid-config-enchilada if this offers any i …], All the patches needed to get hardware working on sailfish are in `sparse/` Jun 08 19:06:29 @erfanoabdi this needed to be overlayed on top of the android system for basically anything to work though https://github.com/sailfish-oneplus6/droid-config-enchilada/blob/hybris-16.0/sparse/usr/libexec/droid-hybris/system/etc/ld.config.28.txt Jun 08 19:07:12 yeah we don't need that stuffs here Jun 08 19:07:20 Hmm right Jun 08 19:07:28 Not sure I can be of more help to be honest Jun 08 19:07:50 fixing crashing camera service will fix 50% of bugs in ubports Jun 08 19:07:57 @erfanoabdi [fixing crashing camera service will fix 50% of bugs in ubports], really> Jun 08 19:07:59 @erfanoabdi [fixing crashing camera service will fix 50% of bugs in ubports], [Edit] really? Jun 08 19:08:02 yeah Jun 08 19:08:13 Hopefully @mrcyjanek can help Jun 08 19:08:25 @kalube [Hopefully @mrcyjanek can help], Sadly, I'm noob also if it comes to porting Jun 08 19:09:05 minimedia waiting for cam to initialize … and ubuntu waits for minimedia to init which is needed for sensor and power Jun 08 19:09:16 (Photo, 742x129) https://irc.ubports.com/c5G3TgWn.png Jun 08 19:09:19 So I should do this? Jun 08 19:09:23 no Jun 08 19:09:26 oh no Jun 08 19:09:37 then what I should do..? Jun 08 19:15:09 let me make a patch for you Jun 08 19:15:21 @erfanoabdi [let me make a patch for you], <3 Jun 08 19:16:43 @mrcyjanek [<3], boot to twrp Jun 08 19:17:04 @erfanoabdi [boot to twrp], ok Jun 08 19:17:46 I'm in Jun 08 19:21:05 get this: https://build.lolinet.com/file/minimediaservice … ```adb shell … mkdir s … mount /data/android-rootfs.img /s … exit``` … `adb push minimediaservice /s/system/bin/` … ```adb shell … chmod 0755 /s/system/bin/minimediaservice … umount s … reboot``` Jun 08 19:23:44 @erfanoabdi [get this: https://build.lolinet.com/file/minimediaservice … adb shell … mkdir s … mou …], ```phablet@ubuntu-phablet:~$ dmesg | grep camera … [ 0.000000] OF: reserved mem: initialized node camera_region@0x8bf00000, compatible id removed-dma-pool … [ 0.784873] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved Jun 08 19:23:44 memory node camera_region@0x8bf00000 … [ 18.781147] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[3839] was attempted by "crash_dump32 170 631 1"[3835] … [ 18.942606] init: Service 'vendor.camera-provider-2-4' (pid 170) received signal 6 … [ 18.942664] init: Sending signal 9 to service 'vendor.camera-provider Jun 08 19:23:44 -2-4' (pid 170) process group... HYBRIS: killing PID instead of process group. … [ 18.944411] init: starting service 'vendor.camera-provider-2-4'... … [ 28.702387] ptrace attach of "/vendor/bin/hw/android.hardware.camera.provider@2.4-service"[4490] was attempted by "crash_dump32 642 710 1"[4488] … [ 38.654339] ptrace attach of "/vendor/bin/hw Jun 08 19:23:44 /android.hardware.camera.provider@2.4-service"[5043] was attempted by "crash_dump32 719 787 1``` Jun 08 19:23:54 dmesg is same as previously :/ Jun 08 19:23:59 get logcat Jun 08 19:24:04 ok Jun 08 19:27:25 Anyone get Halium up and running on the Essential PH-1? Jun 08 19:28:42 @erfanoabdi [get logcat], https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Flogcat2.txt Jun 08 19:33:39 @mrcyjanek [https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Flogcat2.txt], whats sha1 of minimediaservice on your system partition? Jun 08 19:33:45 d16996cd86e72e4318c34453eed7fb483ae323db Jun 08 19:34:43 d16996cd86e72e4318c34453eed7fb483ae323db ./bin/minimediaservice Jun 08 19:34:55 hmm Jun 08 19:37:20 yes Jun 08 19:37:47 @mrcyjanek [https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Flogcat2.txt], Because it seems to crash :/ Jun 08 19:38:54 LD_LIBRARY_PATH=/system/lib64 strace /system/bin/minimediaservice Jun 08 19:41:15 https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Fstrace_minimediaservice.txt Jun 08 19:42:22 ah Jun 08 19:42:28 `strace /system/bin/minimediaservice` Jun 08 19:43:36 now it take a bit longer Jun 08 19:43:44 ioctl(3, BINDER_WRITE_READ Jun 08 19:43:47 It's stuck here Jun 08 19:44:21 ok send it Jun 08 19:44:28 I'll kill it Jun 08 19:45:10 https://oldpc.mrcyjanek.net/files_old/index.php?p=%2FPorting%2Fstrace_minimediaservice_2.txt Jun 08 19:45:12 oh no Jun 08 19:45:14 wait Jun 08 19:45:48 https://paste.ubuntu.com/p/6ZC2Y3tY8k/ Jun 08 19:46:25 Doesn't that mean it's doing what it's meant to? Ignore me if I'm being stupid Jun 08 19:47:53 ```read(3, "# Copyright (C) 2017 The Android"..., 1024) = 1024 … read(3, " partition\n# can't be loaded in "..., 1024) = 1024 … read(3, " has to be able to dlopen the fi"..., 1024) = 1024 … read(3, ".default.asan.search.paths += "..., 1024) = 1024 … read(3, "hs += /system/product/app\nnamesp"..., 1024) = 1024 … read(3, "permitted.path Jun 08 19:47:53 s = /odm/${LIB}\nn"..., 1024) = 1024 … read(3, "o:libvndksupport.so:libvulkan.so"..., 1024) = 1024 … read(3, "################################"..., 1024) = 1024 … read(3, "sp\nnamespace.rs.asan.search.path"..., 1024) = 1024 … read(3, "o:libdl.so:liblog.so:libm.so:lib"..., 1024) = 1024 … read(3, "libhidlmemory.so:libhidltranspor"..., 1024) = 1024 … Jun 08 19:47:53 read(3, "p\nnamespace.vndk.asan.search.pat"..., 1024) = 1024 … read(3, "dk-sp-28/hw\n\n# The \"vndk\" namesp"..., 1024) = 1024 … read(3, "m-android.so\n\n# Allow VNDK-SP ex"..., 1024) = 1024 … read(3, "e delegation to the system names"..., 1024) = 1024 … read(3, "o:libGLESv1_CM.so:libGLESv2.so:l"..., 1024) = 1024 … read(3, "e@1.0.so:android.framew Jun 08 19:47:53 orks.sche"..., 1024) = 1024 … read(3, "mera.device@3.3.so:android.hardw"..., 1024) = 1024 … read(3, "dware.media.bufferpool@1.0.so:an"..., 1024) = 1024 … read(3, "oid.hardware.usb@1.1.so:android."..., 1024) = 1024 … read(3, ":libhidlcache.so:libjpeg.so:libk"..., 1024) = 1024 … read(3, "ight_soft_gsmdec.so:libstagefrig"..., 1024) = 1024 … read(3, "c Jun 08 19:47:53 h.paths += /vendor/${LIB}/vndk-"..., 1024) = 1024 … read(3, "is redirected\n# to the system na"..., 1024) = 1024 … read(3, "################################"..., 1024) = 1024 … read(3, ".default.isolated = false\nnamesp"..., 1024) = 132``` Jun 08 19:52:22 LD_LIBRARY_PATH=/system/lib64 /vendor/bin/adsprpcd & Jun 08 19:52:31 LD_LIBRARY_PATH=/system/lib64 /vendor/bin/sscrpcd & Jun 08 19:52:39 run this 2 command and take logcat again Jun 08 19:53:00 as root? Jun 08 19:53:19 before running this, make sure u have backup of your persist partition Jun 08 19:53:23 @mrcyjanek [as root?], yeah Jun 08 19:53:39 LD_LIBRARY_PATH=/system/lib64 /vendor/bin/chre & Jun 08 19:53:42 @erfanoabdi [before running this, make sure u have backup of your persist partition], I don't have, but i can reflash it within few minutes Jun 08 19:53:58 @erfanoabdi [LD_LIBRARY_PATH=/system/lib64 /vendor/bin/chre &], 3 commands^ Jun 08 19:55:30 root@ubuntu-phablet:~# CANNOT LINK EXECUTABLE "/vendor/bin/sscrpcd": library "libprotobuf-cpp-full.so" not found … [2]+ Exit 1 LD_LIBRARY_PATH=/system/lib64 /vendor/bin/sscrpcd Jun 08 19:57:52 https://paste.ubuntu.com/p/6ZS4s42hV3/ Jun 08 19:59:51 Well, I have to go now, so I'll be back tomorrow Jun 08 19:59:55 Thanks for help Jun 08 20:00:16 Also, when will you have your op6t? Jun 08 20:00:48 @mrcyjanek [Also, when will you have your op6t?], no idea, soon Jun 08 20:02:32 @erfanoabdi [no idea, soon], I think that I'll wait untill you get it... Jun 08 20:02:45 because I'm noob in porting :/ Jun 08 20:03:33 @mrcyjanek [because I'm noob in porting :/], no it's not u, this is complicated.., we have a permission error on qmi service loading Jun 08 20:03:42 sscrpcd isn't loaded Jun 08 20:07:46 @mrcyjanek [because I'm noob in porting :/], You can do it dude, it's ok to have absolutely no clue what's going on and break shit Jun 08 20:07:49 @erfanoabdi [sscrpcd isn't loaded], and I have no idea how to fix it :| Jun 08 20:08:10 @kalube [You can do it dude, it's ok to have absolutely no clue what's going on and break …], I hope that I'll manage to fix it Jun 08 20:08:39 Take persist backup before playing with it Jun 08 20:08:50 It's not on fastboot firmware zip Jun 08 20:09:06 @erfanoabdi [It's not on fastboot firmware zip], Doesn't android regenerate it if it's empty? Jun 08 20:09:25 Running that daemons may change permissions and that may kill Android sensors Jun 08 20:09:32 @kalube [Doesn't android regenerate it if it's empty?], Nope Jun 08 20:09:36 fun... Jun 08 20:09:41 Huh Jun 08 20:09:56 To fix an issue with wifi on sailfish I ended up just not mounting persist at all Jun 08 20:09:59 libhybris didn't seem to care Jun 08 20:10:22 sailfish would break selinux perms and wifi would stop working in android Jun 08 20:10:36 Oh wait I'm pretty sure I copied the contents. nvm Jun 08 20:10:55 Yeah persist is needed Jun 08 20:11:04 We're trying to not do that here Jun 08 20:11:11 hehe yeah Jun 08 20:11:25 @erfanoabdi [Take persist backup before playing with it], Like for example twrp full backup? Jun 08 20:11:30 @mrcyjanek [Like for example twrp full backup?], Yeah Jun 08 20:11:37 Okay, I'll do Jun 08 20:11:44 👍 Jun 08 20:25:24 (Photo, 509x842) https://irc.ubports.com/SD3U0fsF.png cool Jun 08 20:34:05 @anpok [@aribk how is your 7.1 port coming along? A Friend of mine would like to try.], I've been stuck on audio for some time now. But today I wonder if I finally made a little progress. I think maybe I mistakenly thought the sound card was registered and driver got loaded when it actually didn't. Jun 08 20:34:43 I've been comparing the output from 'aplay -l' on my S7 to that on my Nexus 5 Jun 08 20:35:56 Excerpt from Nexus 5 looks like this: Jun 08 20:36:00 card 0: msm8974taikomtp [msm8974-taiko-mtp-snd-card], device 0: MultiMedia1 (*) [] Jun 08 20:36:15 While on my S7 I get this: Jun 08 20:36:31 card 0: Sound [Lucky CS47L91 Sound], device 0: i2s0-pri moon-aif1-0 [] Jun 08 20:37:23 Would I be correct in guessing that this means no driver has been loaded for the sound card on the S7 ? Jun 08 21:43:29 @erfanoabdi How do I know which binder commits to revert? There are many on my kernel that go back several years. All of them? Jun 08 21:50:08 Alright now I have a proper Pixel XL, and should be able to get LXC started and working. I'll keep you all updated. Jun 08 22:05:16 @SolarisSpark Working on the same device! Have lxc running currently but nothing beyond that. Erfan's porting notes have been a huge help. Jun 08 22:05:18 @erfanoabdi [👍], hello Jun 08 22:05:36 can run *-armhf.deb on ubports 64bit ? Jun 08 22:06:03 @JT [@SolarisSpark Working on the same device! Have lxc running currently but nothing …], Wow how did you get it started? Jun 08 22:06:19 I could never get it running on sailfish Jun 08 22:07:43 @SolarisSpark [Wow how did you get it started?], Disabling CONFIG_PFK was the first hurdle. Jun 08 22:08:04 And that's in defconfig huh Jun 08 22:08:21 Or BoardConfig.mk Jun 08 22:10:48 defconfig Jun 08 22:11:22 Alrighty. Anything else I should know to get it running? Jun 08 22:13:18 Op5/5T works fine except modem slot1 causes kernel panic Jun 09 00:09:16 Toni M was added by: Toni M Jun 09 02:15:12 Hoàng Alva was added by: Hoàng Alva Jun 09 02:19:04 dante hunter (MAR) was added by: dante hunter (MAR) **** ENDING LOGGING AT Tue Jun 09 02:59:57 2020