**** BEGIN LOGGING AT Thu Jun 25 02:59:57 2020 Jun 25 03:02:32 C was added by: C Jun 25 07:08:17 Hey does halium-9.0 works for msm8939? Jun 25 07:08:54 My device only has a Pie and lollipop kernel but the pie is the only one with a device tree Jun 25 11:15:49 I'm trying to get plasma mobile to work. Right now it boots and I'm able to ssh into it, but it just sits at the bootloader screen and doesn't show anything. Where do I start debugging? Jun 25 11:21:18 every `test_` segfaults Jun 25 11:27:20 it hangs when I `echo sta > /sys/module/wlan/parameters/fwpath` to enable wifi Jun 25 12:11:17 I want to try to port halium, should i use the arm32 los 14.1 kernel, or the arm64 los 16 kernel? If using the los16 kernel is better, where is the porting guide for halium 9? Jun 25 12:11:40 I want to try to port halium, should i use the arm32 los 14.1 kernel, or the arm64 los 16 kernel? If using the los16 kernel is better, where is the porting guide for halium 9? Jun 25 14:08:04 sakhatlonda was added by: sakhatlonda Jun 25 14:42:14 antoine62[m]1: I would use the 14.1 and Halium 7.1 it is way more mature and easy to port for the moment Jun 25 14:42:18 At least for me personally Jun 25 14:46:53 So I preordered the Sony Xperia Mark II. I figure it is stock Android 10 + Sony proprietary software... Is there a way to rip all of the Sony software and then load that onto the Xperia if I put AOSB on it? Jun 25 14:52:04 Does anyone have a dockerfile that can be used to compile kernels? I'm looking to try and start porting helium 9 to the google pixel 1 (sailfish) Jun 25 14:52:08 Stellar_Eagle was added by: Stellar_Eagle Jun 25 14:52:49 or if that is a bad idea, some other way to get going with all of the tools needed? Jun 25 14:55:20 @erfanoabdi [GPS works if u go outside and wait for it to get location fixed lol (took ~7min)], I am getting "access error" on sensor status app for GPS. App permissions? The sensor status app says backend supported, active and Ubuntu. I don't see any app permission request for GPS. Is there any other way to check other than the app Jun 25 14:55:21 ? Please let me know. Thank you. Jun 25 14:55:46 I'm on a ubuntu 20.04 derivative Jun 25 15:00:59 @Stellar_Eagle [I am getting "access error" on sensor status app for GPS. App permissions? The s …], yeah check logcats Jun 25 15:01:55 @erfanoabdi [yeah check logcats], Thanks. Will do. Jun 25 15:06:50 The term "access error" confused me a bit - is it access to physical hw module or sw module or refusal to app by OS! Will check on logs. Jun 25 15:17:11 @erfanoabdi [yeah check logcats], If anyone calls you by Ubuntu Touch. Do You Show Call Notification? Jun 25 15:21:31 @Stellar_Eagle [The term "access error" confused me a bit - is it access to physical hw module o …], can be any error Jun 25 15:21:51 @KernelPanix [If anyone calls you by Ubuntu Touch. Do You Show Call Notification?], yes i guess Jun 25 15:21:58 @erfanoabdi [yes i guess], Sad Jun 25 15:22:02 interesting hybris boot just panics Jun 25 15:22:05 @erfanoabdi [yes i guess], How I Get Log This Jun 25 15:22:10 Not Works For Me Jun 25 15:22:20 @Lukapanio [interesting hybris boot just panics], on s3ve3g Jun 25 15:22:22 (Sticker, 512x512) https://irc.ubports.com/zOyBXtcI.webp Jun 25 15:23:09 [ 4.020647] [0: switch_root: 1] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 Jun 25 15:23:26 @erfanoabdi [can be any error], Oh ok. Reading about apparmor security. Since it shows zero for apps like camera, location, etc I need to revisit my kernel it seems. Jun 25 15:24:13 ..related to defconfig security settings Jun 25 15:27:20 ah no, check locats Jun 25 15:27:24 logcat* Jun 25 15:27:35 @erfanoabdi [sudo -s … LD_LIBRARY_PATH=/system/lib64 lxc-attach -e -n android -- /system/bin/l …], ^ Jun 25 15:28:01 Ok. Start with that. Thank you. Jun 25 15:28:36 @erfanoabdi [^], ah Jun 25 15:28:37 okay Jun 25 15:28:39 all logcat Jun 25 15:29:02 @KernelPanix [all logcat], logcat doesn't help you Jun 25 15:29:09 u should get syslog Jun 25 15:29:23 @erfanoabdi [u should get syslog], ah Jun 25 15:29:24 okay Jun 25 15:29:43 i Boot To Ubuntu … Call … Wait Done … Get Syslog Jun 25 15:38:17 Ozwald1 was added by: Ozwald1 Jun 25 15:46:03 @KernelPanix [If anyone calls you by Ubuntu Touch. Do You Show Call Notification?], No not even ringing but when you press power button than start ringing and notification Jun 25 15:46:42 @Naveen Kumar [No not even ringing but when you press power button than start ringing and notif …], sad Jun 25 15:46:49 @Naveen Kumar [No not even ringing but when you press power button than start ringing and notif …], Only Device Jun 25 15:46:53 Or All ? Jun 25 16:22:49 : auid=32011 uid=0 gid=0 ses=2 pid=2026 comm="test_hwcomposer" reason="memory violation" sig=6 Jun 25 16:23:04 (Video, 28s) https://irc.ubports.com/nVpPpquE.mp4 Jun 25 16:23:20 BOARD_KERNEL_CMDLINE := selinux=0 audit=0 ignore_loglevel androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78af000 Jun 25 16:26:28 W/Adreno-GSL( 0): : ioctl fd 26 code 0xc0140933 (IOCTL_KGSL_TIMESTAMP_EVENT) failed: errno 22 Invalid argument … W/Adreno-EGLSUB( 0): : gsl_device_3d_add_fence_event failed … W/Adreno-EGL( 0): : EGL_BAD_SURFACE Jun 25 16:35:21 @Lukapanio [W/Adreno-GSL( 0): : ioctl fd 26 code 0xc0140933 (IOCTL_K …], guys any idea? Jun 25 16:36:00 looks similar to http://docs.halium.org/en/latest/porting/debug-build/graphics.html#egl-bad-surface Jun 25 16:36:10 but my rootfs is already caf Jun 25 16:38:16 Hmm qestion can a snapdragon device be not caf? Jun 25 16:39:57 Well for Hammerhead there used to be caf and non-caf repos Jun 25 16:40:22 Pixel devices aren't using CAF hals Jun 25 16:40:34 @Herrie1982 [Well for Hammerhead there used to be caf and non-caf repos], Not nexus and not pixel hear Jun 25 16:40:40 galaxy s3 neo Jun 25 16:40:56 snapdragon 400 Jun 25 16:40:56 @ankaos [BOARD_KERNEL_CMDLINE := selinux=0 audit=0 ignore_loglevel androidboot.hardware=q …], Hermann Jun 25 16:43:26 konusuzadam was added by: konusuzadam Jun 25 16:43:35 Hi Jun 25 16:43:46 @erfanoabdi How do I install Redmi Note 7 (lavender) Ubuntu touch? Jun 25 16:45:34 ?? Jun 25 16:48:24 #notes Jun 25 16:49:51 root@localhost:/# EGL_PLATFORM=hwcomposer test_hwcomposer … width: 720 height: 1280 … library "/vendor/lib/egl/libGLESv2S3D_adreno.so" not found … OpenGL ES 2.0 (OpenGL ES 3.0 V@84.0 AU@05.00.00.046.002 (CL@)) … Segmentation fault Jun 25 16:50:38 flipburn was added by: flipburn Jun 25 16:51:46 eyprcin was added by: eyprcin Jun 25 16:52:19 type=1701 audit(1388537104.570:124): auid=32011 uid=0 gid=0 ses=2 pid=1849 comm="test_hwcomposer" reason="memory violation" sig=11 Jun 25 16:52:39 any idea what is that? Jun 25 16:55:51 [ 260.300435] test_hwcomposer (1849): undefined instruction: pc=b5551c48 … [ 260.300450] Code: e320f000 e320f000 f26001f0 e12fff1e (ec510f1e) … [ 260.383356] type=1701 audit(1388537104.570:124): auid=32011 uid=0 gid=0 ses=2 pid=1849 comm="test_hwcomposer" reason="memory violation" sig=11 … [ 260.387079] mdss_fb_blank_sub: FB_NUM:0, Jun 25 16:55:51 MDSS_FB_BLANK ++ Jun 25 17:04:53 @ankaos [BOARD_KERNEL_CMDLINE := selinux=0 audit=0 ignore_loglevel androidboot.hardware=q …], can u give me U Source ? Jun 25 17:05:13 No Jun 25 17:05:23 @ankaos [No], sad Jun 25 17:05:42 Yea sar Jun 25 17:05:45 [Edit] Yea sad Jun 25 17:06:27 Sailfish 🆗 ubports ❌ Jun 25 17:09:21 @ankaos [Sailfish 🆗 ubports ❌], Cam Jun 25 17:09:24 @ankaos [Sailfish 🆗 ubports ❌], [Edit] Can Jun 25 17:09:33 pls push all to github Jun 25 17:09:39 and give me links Jun 25 17:10:05 @ankaos [Sailfish 🆗 ubports ❌], and this use Snapdragon 625 ( msm8953 ) huh ? Jun 25 17:10:33 enesutku07 github name Jun 25 17:10:40 This is full pull Jun 25 17:14:34 @ankaos [This is full pull], console=ttyHSL0,115200,n8 … => … console=tty0 Jun 25 17:14:36 booted Jun 25 17:14:51 @KernelPanix [booted], Not open screen Jun 25 17:14:57 Tested this command Jun 25 17:15:00 sad Jun 25 17:15:15 Maybe xorg broken Jun 25 17:15:28 @ankaos [Maybe xorg broken], private inbox me Jun 25 17:25:02 If I set CONFIG_DEFAULT_SECURITY_APPARMOR=y, UT does not boot, usb disconnects. If CONFIG_DEFAULT_SECURITY_SELINUX=y UT boots properly but I assume it results in app permissions issue. Are … CONFIG_DEFAULT_SECURITY="apparmor" … CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 … CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 - enough? Jun 25 18:23:47 @Stellar_Eagle [If I set CONFIG_DEFAULT_SECURITY_APPARMOR=y, UT does not boot, usb disconnects. …], No, it did not help. Jun 25 18:41:35 what is reason="memory violation" Jun 25 18:41:40 and what to do with it Jun 25 19:12:07 is there a way to start apparmor in ubport GSI after booting with CONFIG_DEFAULT_SECURITY_SELINUX=y initially? Jun 25 20:14:37 apparmor enabler does not help. Device does not boot after zip install Jun 25 20:29:58 how do you patch the defconfig? I am following the instructions here: https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI)#common-kernel-patches Jun 25 20:30:45 I ran the script but I get the following error Jun 25 20:30:57 echo ERROR: savedefconfig does not match private/msm-google/arch/arm64/configs/marlin_defconfig Jun 25 20:31:36 a b was added by: a b Jun 25 20:31:40 I'm under the impression I need to run some make commands to tell make there is an old kernel config file and use a new one Jun 25 20:59:37 figured out the issue: for future reference. I named the kernel config file marlin_defconfig_helium but a Makefile somewhere was parsing files and looking for config files that end in _defconfig. So, just had to rename my config file to marlin_helium_defconfig. Jun 25 21:00:26 @GarrettCornwell [figured out the issue: for future reference. I named the kernel config file marl …], btw, it's `halium` not helium :) Jun 25 21:07:57 ah thanks. halium, maybe my head is filled with too much helium :) Jun 25 21:16:28 rlots was added by: rlots Jun 25 21:38:44 FDoop was added by: FDoop Jun 25 21:44:21 My device does not boot. I think I may have located the problem, but need this confirmed, as well as tips on how to solve the problem. Please have a look at these lines from 'dmesg' (in file below). Note the things not being mounted, and there is also the message toeards the bottom that /sbin/init cannot be found. Jun 25 21:44:45 (Document) https://irc.ubports.com/pqzcODU2.txt Jun 25 21:45:22 [Edit] My device does not boot. I think I may have located the problem, but need this confirmed, as well as tips on how to solve the problem. Please have a look at these lines from 'dmesg' (in file below). Note the things not being mounted, and there is also the message towards the bottom that /sbin/init cannot be found. Jun 25 22:21:13 rei91 was added by: rei91 Jun 25 23:04:08 Faroq Sonkar was added by: Faroq Sonkar Jun 25 23:58:40 kuesji was added by: kuesji Jun 26 01:28:12 Shakeelraja (MAR) IDX was added by: Shakeelraja (MAR) IDX Jun 26 01:30:23 Lina11 🇧🇩🇧🇩 was added by: Lina11 🇧🇩🇧🇩 Jun 26 01:44:13 Argaromit Ernst was added by: Argaromit Ernst **** ENDING LOGGING AT Fri Jun 26 03:01:39 2020