**** BEGIN LOGGING AT Thu Sep 27 02:59:57 2012 **** ENDING LOGGING AT Thu Sep 27 08:14:33 2012 **** BEGIN LOGGING AT Thu Sep 27 08:16:20 2012 Sep 27 11:48:05 bluelightning: I've almost slaughtered the linux-yocto_3.2 defconfigs and plan to do that for 3.4 as well. One issue is, though, I don't seem able to exclude the KERNEL_FEATURES appended by linux-yocto_3.2.bb Sep 27 11:49:08 somehow adding KERNEL_FEATURES = "" in our .bbappend did not help Sep 27 11:50:05 so we get forcedly netfilter and taskstats (not a bad affair, we already know their origin from /meta fragms Sep 27 11:50:26 and we'd use the vanilla yocto possibly) Sep 27 11:52:05 dromede: after that kernel split it would be easier to manage all the non-hardware config options. I hope 3.6 will follow soon ;) Sep 27 12:36:41 ant_work: not sure, maybe they are set using an override or in python code that runs after that, which is probably not correct Sep 27 13:45:20 I'll verify that Sep 27 14:53:35 does anyone have a tosa? Sep 27 15:00:55 hi dromede, Jay7 has one Sep 27 15:01:42 i need to know whether the suspend/resume bug happens on tosa Sep 27 15:02:46 have you checked if that code is used by others? I didn't yet Sep 27 15:03:52 but there are as well issues on poodle and c7x0 Sep 27 15:04:07 at least with recharge leds :) Sep 27 15:04:25 hi Sep 27 15:04:49 recharge led is off while suspended because the led subsystem doesn't support that Sep 27 15:05:06 ja7: what's the latest working tosa kernel? Sep 27 15:05:19 sorry guys I went to conference this weekend and have no time to check things :( Sep 27 15:05:30 no problem Sep 27 15:05:32 dromede: oh.. good question Sep 27 15:05:37 try to ask lumag Sep 27 15:06:02 he have tosa as well and he spend some time on kernel hacking for it Sep 27 15:06:24 do you need his email/ Sep 27 15:07:38 no, he's listed in MAINTAINERS file Sep 27 15:08:14 here's the problem Sep 27 15:08:33 the suspend/resume bug is probably caused by misconfigured gpio18 Sep 27 15:09:28 gpio18 has a single alternate function - RDY signal for VLIO interface Sep 27 15:10:44 and in spitz_pm.c postsuspend routine, gpio18 is configured as RDY signal Sep 27 15:11:08 but i suspect that gpio18 is only used on tosa for it's toshiba companion chip Sep 27 15:12:36 you may ask lumag about this too Sep 27 15:12:43 i will Sep 27 15:12:59 or may be ask in zaurus-devel@ Sep 27 15:19:58 actually, tosa doesn't use sharpsl_pm Sep 27 15:23:23 hmmm, where could i find sources of the original sharp kernels? Sep 27 15:24:39 dromede: should be around, look for 2.4-embedix Sep 27 15:24:58 aka 2.4-crapix in some circles ;) Sep 27 15:25:06 that's the one published by sharp, no modifications by other users? Sep 27 15:25:25 I'm not sure if anyone did any work on top Sep 27 15:25:34 thanks Sep 27 15:25:40 following that there were the 2.6-rp kernels which you probably already know about Sep 27 15:25:55 but those aren't original Sharp of course Sep 27 15:26:20 i need the original ones from sharp Sep 27 15:26:40 i need to know how they used gpio18 Sep 27 15:28:00 OK, the embedix source would be the place to look I guess Sep 27 15:48:51 bbl Sep 27 20:21:49 jay7:ping Sep 27 20:21:56 i've got another patch for you Sep 27 20:22:00 a big one Sep 27 20:22:08 fb code refactoring Sep 27 20:23:25 http://paste.debian.net/193734/ **** ENDING LOGGING AT Fri Sep 28 02:59:56 2012