**** BEGIN LOGGING AT Wed Jun 07 03:00:04 2017
Jun 07 09:49:51 <ant_work> VartiWork, hello
Jun 07 09:50:10 <ant_work> I'm confident 3.2 will boot
Jun 07 09:50:12 <ant_work> https://github.com/LinuxPDA/linux-kexecboot/tree/master/zaurus
Jun 07 09:50:23 <ant_work> but test 3.10 as well
Jun 07 09:50:56 <ant_work> (this 3.10 lacks f2fs as the 3.2)
Jun 07 09:51:25 <ant_work> 3.2 lacks support for repartitioned devices as well
Jun 07 09:51:34 <ant_work> if it boots on akita I'll pimp it up
Jun 07 09:51:40 <ant_work> bbl
Jun 07 10:03:31 <VartiWork> ok, I have here both my Akita and the Boxer
Jun 07 10:03:43 <VartiWork> I'll test them during the lunch break
Jun 07 10:58:28 <ant_work> 3.10 has issues with SD card on my C860
Jun 07 10:59:12 <ant_work> I did not test 3.2 last night but should be ok, like the lost copies on kexecboot.org
Jun 07 11:02:18 <ant_work> greguu, I found here the backport as patches
Jun 07 11:02:26 <ant_work> https://github.com/unleashed/f2fs-backports/tree/master/f2fs-for-3.2
Jun 07 11:02:49 <ant_work> ofc there is the 'official' tree
Jun 07 11:02:50 <ant_work> https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-stable.git/refs/tags
Jun 07 12:26:12 <VartiWork> ant_work: Unfortunately, neither the 3.10 nor the 3.2 kexec boot on my Akita
Jun 07 12:26:18 <VartiWork> tested by doing a NAND restore and trying to boot 3.10
Jun 07 12:26:27 <VartiWork> erased both root and home partitions on NAND using the latest updater.sh, then tried 3.10 again and 3.2
Jun 07 12:26:34 <VartiWork> I was booting both of them from a cold restart, i.e. power supply detached and battery removed for 5s, with a 2GB SD with only an ext3 partition, with the latest Alarmz on it
Jun 07 12:26:42 <VartiWork> they always showed the same behaviour: screen flashes once (i.e. screen is initialized), the charger led goes off after 2s, nothing else happens, no led activity nor anything shown on screen
Jun 07 12:26:49 <VartiWork> I have left the Zaurus in this state for approx. 5 min, nothing changes
Jun 07 12:26:56 <VartiWork> should I try to boot the same config, with the same SD, over and over, to see if it be a problem recognizing the SD, or it should anyway have at least showed the menu?
Jun 07 12:29:18 <ant_work> doh
Jun 07 12:29:27 <ant_work> try removing the SD
Jun 07 12:30:01 <ant_work> 3.2 was surely booting on akita
Jun 07 12:31:13 <VartiWork> ok, I'll try that
Jun 07 12:33:45 <ant_work> then try also the Omegamoon one, also surely working
Jun 07 12:33:46 <ant_work> http://www.omegamoon.com/blog/static.php?page=ZaurusUbuntu
Jun 07 12:42:46 <VartiWork> I already tested that long ago, it works here
Jun 07 12:43:05 <VartiWork> that was my first kexec I have ever used, back when I was using Zubuntu
Jun 07 12:44:27 <ant_work> flashing it with the latest updater.sh?
Jun 07 12:56:45 <VartiWork> the 3.2/3.10 kexecs?
Jun 07 12:57:25 <VartiWork> or the omegamoon one?
Jun 07 13:05:20 <ant_work> try omegamoon flashed with latest kexecboot
Jun 07 13:05:32 <ant_work> err  latest updater.sh
Jun 07 13:05:35 <ant_work> I mean
Jun 07 13:06:28 <ant_work> if that doesn't boot then updater.sh is broken for akita
Jun 07 13:06:41 <ant_work> we turn in circles...
Jun 07 13:23:44 <ant_work> VartiWork, I have offered 50eur for an akita on ebay.it
Jun 07 13:24:12 <ant_work> he's asking 119 eur + 15 shipping
Jun 07 13:27:19 <VartiWork> ok, will try that too
Jun 07 13:27:31 <VartiWork> and yes, it's frustrating...
Jun 07 13:28:05 <VartiWork> is that the same guy offering those 3 akitas?
Jun 07 13:28:52 <VartiWork> his offer has ended with no one bidding for them
Jun 07 13:29:25 <ant_work> yes
Jun 07 13:30:32 <VartiWork> good luck then
Jun 07 13:30:48 <ant_work> I am perplexed
Jun 07 13:31:13 <ant_work> Jay7 and dromede were using linux-kexecboot 3.2
Jun 07 13:31:18 <ant_work> on akita
Jun 07 13:33:05 <VartiWork> well, technically might be not exactly the same kexec... maybe different gcc version used to compile it?
Jun 07 13:33:39 <ant_work> I recompiled the toolchain used back the
Jun 07 13:34:01 <ant_work> it is all tracked with git revisions
Jun 07 13:35:21 <ant_work> but yes, it's not the same binary, kexecboot itself changed
Jun 07 13:35:59 <ant_work> have you tested it on c860 for fun? I'l ldo that later today to compare 3.10 and 3.2 wrt SD issues
Jun 07 13:49:56 <VartiWork> I wanted to switch over to the 860 once I'll have a stable alarmz install on my akita
Jun 07 13:57:40 <VartiWork> I'm interested to see if alarmz runs on it too
Jun 07 14:20:00 <ant_work> the binaries are the same arch armv5te so it is just to check the config wrt video
Jun 07 14:20:24 <ant_work> and ofc the suspend/resume open/close lid events
Jun 07 14:22:02 <VartiWork> btw are you still having problems with your 1GB SD?
Jun 07 14:42:20 <ant_work> not me, I have only smaller
Jun 07 14:42:55 <ant_work> I tested the 64M
Jun 07 14:43:11 <ant_work> then one older 512
Jun 07 14:43:31 <ant_work> the 1gb is in collie right now...
Jun 07 14:59:13 <VartiWork> I recall you told me you have problems with one of your SD cards, I don't remember what size...
Jun 07 15:00:04 <ant_work> actually any of the cards works well in the c860 with latest kernels and with 3.10 as well
Jun 07 15:01:04 <ant_work> I must try on poodle or spitz th esame cards
**** ENDING LOGGING AT Thu Jun 08 03:00:01 2017