**** BEGIN LOGGING AT Fri Jul 08 23:59:56 2005 Jul 09 01:10:01 hi ! Jul 09 01:10:33 where i can cvs server package for NLSU2 ? :) Jul 09 01:11:52 As far as I know, it's in the feed. ipkg install cvs Jul 09 01:17:55 thanks you for your help :) Jul 09 01:18:21 np Jul 09 01:18:26 i try this. but i think it is cvs client and not server :s Jul 09 12:22:31 Hi. New to nslu2, and wondering if there is an updated FAQ/howto unsling to a usb flash device? Jul 09 12:23:00 Can't seem to get it to boot with the flash device plugged in after unslinging Jul 09 12:24:05 And unfortunately most of the info on non hard drive setups looks like they're all for unslung versions <= 3 Jul 09 12:27:55 hi Jul 09 12:28:23 what is the size of your usb stick? Jul 09 12:28:57 and, in which port it is attached? Jul 09 12:29:17 and, which unslung version you would use? Jul 09 12:29:30 it is a 256mb flash drive Jul 09 12:29:48 i plugged it in to disk1 so that it could be formatted, and then unslung to Jul 09 12:29:55 unslung 5.5-beta Jul 09 12:29:59 k Jul 09 12:30:14 any erros, when you're unslinging? Jul 09 12:30:22 s/erros/errors Jul 09 12:30:31 no, nothing complains Jul 09 12:31:34 nslu2 boots, and doesn't show any "error"-like led messages Jul 09 12:31:38 but you can boot the nslu without the stick attached? and then you can hotplug the stick? Jul 09 12:31:49 yes Jul 09 12:31:58 then do it pls Jul 09 12:32:10 it is right now Jul 09 12:32:55 when you telnet in, and do a "ls -la /", there should be a file called .sda1root, is it there? Jul 09 12:33:16 yes Jul 09 12:33:33 and .unslung also, i assume Jul 09 12:33:37 correct Jul 09 12:33:57 and some dirs, at least bi etc usr opt var ... Jul 09 12:34:03 s/bi/bin Jul 09 12:34:16 yes, usb stick shows up in /share/hdd Jul 09 12:34:25 with both the conf and data dirs Jul 09 12:35:17 oops, sorry, you should do a "ls -la /share/hdd/data", which is equal to / if the slug boots with disk/stick attached Jul 09 12:35:59 so, in /share/hdd/data, there should be a .sda1root file Jul 09 12:36:22 /share/hdd/data has both the .sda1root and .unslung (as well as the other usual directories) Jul 09 12:37:21 k Jul 09 12:38:09 When I boot it with the flash stick plugged in to disk1, it seems to get stuck as far as I can tell Jul 09 12:38:22 The static IP I had it set to fails to respond Jul 09 12:38:51 I'm not sure why though, as I haven't seen any errors in unsling, and did a sync afterwards to be on the safe side Jul 09 12:39:38 how long did you wait, between hot plug the stick, and do the unsling command? Jul 09 12:39:57 few minutes Jul 09 12:41:40 hm Jul 09 12:42:11 Is there any boot process logging that might give hints? Jul 09 12:44:02 just a moment pls Jul 09 12:47:05 ok Jul 09 12:50:59 almostunslung, have you used unslung firmware before with the stick, or is that your 1st try? Jul 09 12:51:21 this is my first try Jul 09 12:51:45 so, the /share/hdd/data/unslung dir is empty, or not existent Jul 09 12:51:49 before this, i had tested the stick w/ the samba filesharing Jul 09 12:52:07 according to the readme, a nice idea Jul 09 12:52:44 the /share/hdd/data/unslung dir exists, and is empty Jul 09 12:52:51 k Jul 09 12:54:43 there are some ideas and hints at the ml in a threads starts at http://groups.yahoo.com/group/nslu2-linux/message/7232 Jul 09 12:55:20 there are also some hints about logging in this thread, you could try this Jul 09 12:56:06 myself hasn't any idea, what's wrong with your nslu :-( Jul 09 12:56:24 ok, will check out the link - thanks **** ENDING LOGGING AT Sat Jul 09 23:59:56 2005