**** BEGIN LOGGING AT Fri Sep 30 02:59:57 2005
Sep 30 10:01:36 <lolo2> hi
Sep 30 10:02:44 <lolo2> i've unslung my nslu2 and installed ufsd.o patch from r63
Sep 30 10:03:15 <lolo2> i've also tried the r63 fimrware before and it worked pretty well
Sep 30 10:03:41 <lolo2> USB plugg/Unplugg, NTFS, FAT32 ...
Sep 30 10:04:32 <lolo2> but with unslung 5.5b, i have some pb on the usb ports
Sep 30 10:05:27 <lolo2> is ther someone who have compiled unslung with the r63 sources and can send me this compiled firmware ?
Sep 30 10:21:53 <lolo2> did i ask a stupid question ? =)
Sep 30 10:22:11 <lolo2> nobody answer so...
Sep 30 10:35:31 <Count_Drey> ok, lolo2, what you will be needing is a cat and a blender
Sep 30 10:36:43 <lolo2> ok, and ?
Sep 30 12:19:40 <phatmonkey^iBook> argh
Sep 30 12:19:52 <phatmonkey^iBook> just flashed my slug with openslug 2.7
Sep 30 12:20:04 <phatmonkey^iBook> and the password opeNSLUg doesn't work
Sep 30 12:20:33 <phatmonkey^iBook> oh wait, nevermind, not logging in as root
Sep 30 12:20:41 <phatmonkey^iBook> ahem
Sep 30 12:30:13 <Count_Drey> yep...
Sep 30 13:40:44 <Guest0471> Hi, I've just unslung my new NSLU2. I wonder how to install lamp.
Sep 30 13:41:36 <caplink811_log> 1st, make sure, that your root fs is on the external data media
Sep 30 13:42:13 <caplink811_log> 2nd ipkg update; ipkg install apache; ipkg install mysql ; ipkg install php; ready
Sep 30 13:43:17 <Guest0471> Thanks, but for "ipkg install apache", should I upload the package to the hdd ?
Sep 30 13:44:00 <caplink811_log> no, ipkg install xx wiould load the main, and all packages on which it depends
Sep 30 13:44:30 <Guest0471> So NSLU2 have to be connected to the Internet ?
Sep 30 13:44:37 <caplink811_log> yes, sure
Sep 30 13:45:36 <Guest0471> Ok. It works like perl ppm ? 
Sep 30 13:46:05 <caplink811_log> sorry, what's perl ppm? something like cpan?
Sep 30 13:46:43 <Guest0471> Yes, it's to install perl module from cpan.
Sep 30 13:47:33 <caplink811_log> yeah
Sep 30 13:47:45 <phatmonkey^iBook> http://www.nslu2-linux.org/wiki/DebianSlug/OpenDebianSlug tells me to use my mac address from the bottom of the case. the case says "LKG7DB426" which doesn't look much like an mac address :/
Sep 30 13:48:09 <caplink811_log> but make sure, that you fill in a correct dns entry in the webadmin, so the nlsu can resolv ipkg.nslu2-linux.org
Sep 30 13:48:17 <caplink811_log> which hold the packages
Sep 30 13:50:27 <Guest0471> Fine, I will try tonight (now 11 PM in France). So I have to power up the NLSU2 without hdd connected, then telnet and connect hdd. Is it right ?
Sep 30 13:50:32 <caplink811_log> http://ip_og_your_nslu/Management/setup.cgi?next_file=lan.htm , bottom half of the page
Sep 30 13:51:22 <phatmonkey^iBook> do I even need the " pre-up ifconfig eth0 hw ether 00:04:5A:XX:YY:ZZ" line? 
Sep 30 13:51:58 <caplink811_log> yes, but the easier way is to change the root pw, and divert the rc.xinetd so, that the root pw is known, when youÄre booting with a hdd attached, and telnet is always enabled
Sep 30 13:53:28 <caplink811_log> hi phatmonkey^iBook , maybe, that #openslug covers that topic much more, than that chanel
Sep 30 13:53:37 <phatmonkey^iBook> ok
Sep 30 13:54:26 <caplink811_log> Guest0471, you should read some pages on the wiki
Sep 30 13:54:31 <caplink811_log> ~nslu2-wiki
Sep 30 13:54:32 <capbot> hmm... nslu2-wiki is the short-hand way of saying "Have a look at the NSLU2-Linux Wiki at http://www.nslu2-linux.org/".
Sep 30 13:54:54 <caplink811_log> to discover some basic, to handle some things on the nslu2
Sep 30 13:55:10 <caplink811_log> e.g divertion scripts
Sep 30 13:56:49 <Guest0471> Yes I read how to change root pw and then copy /etc/password to the hdd but I have to re-flash because I wasn't able any more to access telnet. I'm going to browse the wiki. Thanks.
Sep 30 13:57:09 <caplink811_log> ~nslu2-howto
Sep 30 13:57:10 <capbot> have a look at the HowTo's at http://www.nslu2-linux.org/wiki/HowTo/HomePage
Sep 30 13:57:18 <caplink811_log> maybe a good starting point
Sep 30 13:57:36 <caplink811_log> ~thanks
Sep 30 13:57:36 <capbot> de rien, caplink811_log
Sep 30 14:43:05 <Guest6731> Hello, I tried to know if rootfs is on my hdd with df -k command. Well I think it's not. At which step am i wrong ?
Sep 30 15:46:50 <Mjelva> caplink811_log
Sep 30 15:47:22 <Mjelva> actually, any of you...
Sep 30 15:47:36 <Mjelva> i was in here the other day. had a disk not formatted error.
Sep 30 15:47:49 <Mjelva> i backed up all my data. have the disk connected to this computer with USB.
Sep 30 15:47:54 <Mjelva> what's the linux command to fix it?
Sep 30 15:48:06 <Mjelva> file check + fix and all that jazz.
Sep 30 16:08:38 <slabb> Can anyone help with a flash problem?
Sep 30 16:11:10 <slabb> I was flashed openslug and now I can
Sep 30 16:11:28 <slabb> 't ssh into my nslu2
Sep 30 16:13:37 <slabb>  i am from ukraine
Sep 30 16:14:54 <slabb> I will ask my comrads
Sep 30 16:14:56 <slabb> bye
Sep 30 16:17:15 <Mjelva> in soviet russia, ssh openslugs you.
Sep 30 19:39:15 <orem> hi, is there s/b that can help me with an OE compile problem on x86_64?
Sep 30 19:41:01 <orem> I'm trying to compile OpenSlug 2.7-beta but the first package fails already with an 'gcc: x86_64: No such file or directory' error.
Sep 30 19:46:54 <ByronT> feel free to ask in #openslug (maybe more appropo there... :) )
Sep 30 19:47:11 <orem> ByronT: thanks, will do
**** ENDING LOGGING AT Sat Oct 01 02:59:56 2005