**** BEGIN LOGGING AT Wed Oct 19 03:00:21 2005
Oct 19 12:28:45 <kn0xster> hi any one here?
Oct 19 12:31:55 <acw43> Depends what you want :-)
Oct 19 12:34:48 <kn0xster> I want some help :-(
Oct 19 12:35:27 <kn0xster> when i copy loads of files from a pc over to disk 1 on the slug it never finishes... 
Oct 19 12:35:54 <kn0xster> I always get a timeout error. and then i have to unplug the slug to be able to access it again. 
Oct 19 12:36:22 <kn0xster> im running the standard linksys firmware i think its the 63, the one on their site now. 
Oct 19 12:37:08 <kn0xster> i thought maybe it was because of some large files but i tried 2 or 3 large files lastnight (ove 1.5gb each) and they worked fine.
Oct 19 12:38:01 <kn0xster> if anyone has any suggestions as to what I need to do then im all ears.
Oct 19 12:39:36 <caplink811_log> you should use a switching hub, and you should shutdown upnp on the nslu2, and if possible on your oter network devices, e.g. router
Oct 19 12:40:21 <kn0xster> I did have it plugged into a BEFW11S4 but i've just tested it on proper switch now. 
Oct 19 12:41:03 <kn0xster> when you disable Upnp does the slug need to be rebooted? 
Oct 19 12:50:21 <caplink811_log> dunno, but may be the better solution
Oct 19 12:51:26 <kn0xster> ok. well I'll try that then. 
Oct 19 12:51:46 <kn0xster> I'm just trying to see if i have any more luck with another USB disk.
Oct 19 12:51:57 <kn0xster> but its taking a while to format.:-s
Oct 19 13:09:49 <caplink811_log> if you think you have an usb issue, you can read http://groups.yahoo.com/group/nslu2-general/database?method=reportRows&tbl=1
Oct 19 13:15:24 <kn0xster> thanks.
**** BEGIN LOGGING AT Thu Oct 20 09:58:12 2005
Oct 20 13:01:03 <caplink811_log> capbot_,  test
**** BEGIN LOGGING AT Thu Oct 20 16:06:11 2005
**** BEGIN LOGGING AT Thu Oct 20 18:54:11 2005
**** BEGIN LOGGING AT Thu Oct 20 22:27:18 2005
**** BEGIN LOGGING AT Thu Oct 20 22:50:17 2005
**** ENDING LOGGING AT Fri Oct 21 03:00:00 2005