**** BEGIN LOGGING AT Mon Oct 24 02:59:57 2005 Oct 24 06:49:48 Does anyone know when unslung 6 based on the Linksys 2.3R63 Firmware will be released? Oct 24 09:33:38 how do I change the openslug ipaddress? do i need to redo a turnup init? Oct 24 10:55:17 hi Oct 24 10:55:22 i need help :( Oct 24 10:55:30 ive had unslung 3 on R25 Oct 24 10:55:41 ive flashed R29 unslung 5 on Oct 24 10:55:57 anyone there Oct 24 10:56:48 when i telnet in im getting /bin/login no such file or directory Oct 24 10:56:51 about 5 times Oct 24 10:56:54 so it wont telnet in Oct 24 12:08:38 morning Oct 24 12:20:17 hi, I'm trying to connect an USB A/D Device to the nslug2, ehich wants the usb hiddev kernel module. Is Oct 24 12:20:24 that available? Oct 24 12:22:48 unslung/openslug/debonaras? Oct 24 12:25:30 openslug, then opendebian installed Oct 24 12:29:01 I see # CONFIG_USB_HID is not set Oct 24 12:29:54 you can't compile a kernel and the modules for your own? dunno if it possible with od.. Oct 24 12:31:42 well, I haven't set up the build environment yet, (running debian) Oct 24 12:39:42 oO[NOVA]Oo, anything new about the sandwich slug? Oct 24 13:12:58 oh hey caplink Oct 24 13:13:25 anything new? yeah. this morning i noticed drive 2 was failing. spinning down, spinning up, spinning down, spinning up, etc..etc.. Oct 24 13:13:32 :) Oct 24 13:13:51 that really sucked but was just a power supply issue Oct 24 13:13:57 the psu for the external hdd casing sucks Oct 24 13:14:10 runs quite hot. obviously not meant for any long term use Oct 24 13:14:42 so i decided to build my own psu. i'll solder the 5volt lead for the nslu itself to it as well, tomorrow or so Oct 24 13:14:52 at least the drives are running again. Oct 24 13:15:36 i got vsftpd running too, meaning, it listens to ftp now but i still don't know how to get it to work like it did with the stock linksys firmware - ie, give me a 'disk 1' 'disk 2' folder and such Oct 24 13:16:32 hey all Oct 24 13:16:34 anyone offer some help Oct 24 13:17:14 um i'm offering help Oct 24 13:17:23 i dunno if i CAN help Oct 24 13:18:06 check priv Oct 24 13:20:23 u there nova Oct 24 13:20:53 i'm here but i'm not getting anything on my private chat Oct 24 13:20:58 oh ok Oct 24 13:21:08 i had unslung v3 on Oct 24 13:21:21 200gb maxtor on it with ccxstream(xbox) and DropBear Oct 24 13:21:24 all working nicely Oct 24 13:21:34 so decided today to upgrade to unslung v5 Oct 24 13:21:40 now its all gone wrong Oct 24 13:21:41 and then santa came and put your nslu2 in his bag and left Oct 24 13:21:52 hmmm Oct 24 13:22:00 when i type IPKG Oct 24 13:22:05 i assume you followed the readme to the letter? ;) Oct 24 13:22:05 i get cannot find Oct 24 13:22:14 i followed readme as best i could Oct 24 13:22:21 okay so how far did you get? Oct 24 13:22:24 but think its still confused by v3 stuff on the hdd Oct 24 13:22:28 could be Oct 24 13:22:32 i never upgraded myself to v3 Oct 24 13:22:36 i started with 5.5 myself Oct 24 13:22:49 v3 was latest when i built this system Oct 24 13:22:52 im now stuck Oct 24 13:22:55 withot hd in Oct 24 13:23:00 i can telnet in Oct 24 13:23:10 if i plug hd in while in telnet HDD doesnt mount at all Oct 24 13:23:21 if i reboot with hdd in it mounts just fine but i cannot login on telnet Oct 24 13:23:30 Magma82, 1st can you verify that the rootfs is on /dev/sda1, use the df and mount command Oct 24 13:23:35 so that would be the 1st thing im stuck on Oct 24 13:23:44 caplink knows everything. *worship* Oct 24 13:24:04 well except my creditcard number. Oct 24 13:24:09 ok im telnnetted in now Oct 24 13:24:13 nope, only own expierience, and 15 years 2nd level support too Oct 24 13:24:15 just plugged hard drive in Oct 24 13:24:34 waiting for it to find it if it does :( Oct 24 13:24:44 it should Oct 24 13:24:52 i see rootfs Oct 24 13:25:07 and dev/mtdblock4 Oct 24 13:25:13 thats all Oct 24 13:25:26 so, if you didn't change /share/hdd/conf/passwd then nobody knows the root pw, so you should change it to a well know one Oct 24 13:25:26 ipkg doesnt work Oct 24 13:25:48 so change passwd now ? Oct 24 13:25:57 to my own choice yes ? Oct 24 13:25:59 you've used the /sbin/unsling command? Oct 24 13:26:19 before? Oct 24 13:26:24 earlier yes Oct 24 13:26:28 now it doesnt pick up DISK 1 Oct 24 13:26:54 ../share/hdd/data/ is not a mounted disk Oct 24 13:26:57 i get Oct 24 13:27:17 i think i need to get rid of the v3 unslung off the hdd Oct 24 13:27:25 but i still wanna keep my media files Oct 24 13:27:43 not a problem at all Oct 24 13:27:51 go for it cap Oct 24 13:27:55 what to do Oct 24 13:28:01 teareing my hair out Oct 24 13:28:05 4 hours been at it Oct 24 13:28:12 and got no further Oct 24 13:28:22 nice, you've have something to tear out ;) Oct 24 13:28:26 lol Oct 24 13:28:36 i have telnet open now Oct 24 13:28:38 the age thingy Oct 24 13:28:46 im ageing by the minute Oct 24 13:28:59 wish id left alone working on v3 Oct 24 13:29:03 but the disk isn't recognised by the slug Oct 24 13:29:13 it does if i reboot with disk in Oct 24 13:29:23 but if plugged in halfway thru telnet it doesnt mount Oct 24 13:29:28 but then yoiu don't know the root pw Oct 24 13:29:33 yip Oct 24 13:29:36 thats the problem Oct 24 13:29:39 s/yoiu/you Oct 24 13:29:50 ?? Oct 24 13:30:11 so you should try mount -t ext3 /dev/sda2 /tmp/tmpmnt Oct 24 13:30:18 i can access the hard drive from my pc and delete files from there Oct 24 13:30:27 pluggin it in direct to my pc Oct 24 13:30:30 not neccessary atm Oct 24 13:30:41 sda 2 ? Oct 24 13:30:46 not 1 ? Oct 24 13:30:48 its in disk 1 Oct 24 13:30:55 yep, aka /share/hdd/conf, your conf partition Oct 24 13:31:07 disk 1 -> sda Oct 24 13:31:15 disk 2 ->sdb Oct 24 13:31:35 mount: Mounting /dev/sda2 on /tmp/tmpmnt failed: No such file or directory Oct 24 13:31:51 does /tmp/tmpmnt exist? imho, it should Oct 24 13:32:09 tmpmnt doesnt Oct 24 13:32:18 ../tmp/ does Oct 24 13:32:24 and var/tmp Oct 24 13:32:35 sorry, my fault, its /mnt/tmpmnt Oct 24 13:32:52 ok done Oct 24 13:32:55 works Oct 24 13:33:03 df = Oct 24 13:33:12 .../dev/sda2 Oct 24 13:33:12 ls /mnt/tmpmnt give something like passwd passwd.tt ... Oct 24 13:33:34 ls /mnt/tmpmnt Oct 24 13:33:56 # ls /mnt/tmpmnt Oct 24 13:33:58 backup_sh.conf config config.bin group group.ttt Oct 24 13:33:59 lost+found opt.old passwd passwd.BAK server.log Oct 24 13:34:01 share share.info share.info.ttt smb.conf smb.conf.ttt Oct 24 13:34:04 smbpasswd smbpasswd.ttt tmp upgrade usr.old Oct 24 13:34:04 nice Oct 24 13:34:05 usrgrp.info usrgrp.info.ttt Oct 24 13:34:18 you're familar with vi? Oct 24 13:34:19 ok i did that passwd.bak ages ago Oct 24 13:34:36 i dont know either of the passwd's for those files Oct 24 13:34:44 ive used vi only once Oct 24 13:34:58 1st "cat /etc/passwd" Oct 24 13:35:17 ok i have the list of passes Oct 24 13:35:34 note on a sheet of paper the password for user root Oct 24 13:35:46 now give them to me so i can blow up your pc Oct 24 13:35:51 lol Oct 24 13:35:57 ;) Oct 24 13:36:11 ok noted it down Oct 24 13:36:14 thats coded uNSLUng not realy a secret ;) Oct 24 13:36:14 in notepad Oct 24 13:36:34 ah hold on caplink Oct 24 13:36:37 ive been pissing about Oct 24 13:36:40 if i only knew the root password for the default nslu2 Oct 24 13:36:42 i may have changed that Oct 24 13:36:47 when i typed passwd ??? Oct 24 13:36:59 yes that would help nova lol Oct 24 13:37:41 sorry have to feed the cat,ok, next point Oct 24 13:37:45 to login via TELNET i use root / uNSLUng Oct 24 13:37:55 so the password is still default ya ? Oct 24 13:37:55 vi /mnt/tmpmnt/passwd Oct 24 13:37:59 as i did piss about with passwd Oct 24 13:38:22 ok im in the file Oct 24 13:38:33 how does it feel? Oct 24 13:38:40 kinda slippery Oct 24 13:38:50 ok the root pass is different Oct 24 13:38:51 if you've booted without disk, and then log in, so this is these password, maybe uNSLUng or another Oct 24 13:38:52 i always thought it felt rather cryptic Oct 24 13:39:09 to what i noted down earlier Oct 24 13:39:28 ok, you've started vi Oct 24 13:39:34 yes im in the file now Oct 24 13:39:41 after root: ******* is different Oct 24 13:39:58 to what i noted down earlier in this conversation Oct 24 13:40:17 then go with the cursor to the 1st charakter in the 2nd field, and hit x, this should delete the charakter under the cursor Oct 24 13:40:35 its put an "o" there Oct 24 13:40:41 lol Oct 24 13:40:45 hit i and use del ;) Oct 24 13:40:52 press esc to exit insert mode ;) Oct 24 13:41:05 ok working now cap Oct 24 13:41:06 :w to save, :q to quit and :q! to quit without writing Oct 24 13:41:09 have i said hit i? Oct 24 13:41:17 cap its working Oct 24 13:41:18 oO[NOVA]Oo, not so fast Oct 24 13:41:27 ok do i delete everything after root: Oct 24 13:41:40 k, than delete all charakters to the end of the 2nd field marking with : Oct 24 13:41:42 u on private caplink ? Oct 24 13:41:55 no, thats quie funny ;) Oct 24 13:42:24 everyone can learn a little from another Oct 24 13:42:26 i dunno what ya mean cap Oct 24 13:42:36 i have at moment Oct 24 13:42:53 root:scj/deletedstuff I:0:0 Oct 24 13:42:59 what do i delete ? Oct 24 13:43:08 k, you have deleted every charakter in the 2nd field, than hit i (insert) and fill the coded pw in the 2nd field Oct 24 13:43:53 after deleting Oct 24 13:43:56 how do i enter fields Oct 24 13:43:59 root::0:0:root:/root:/bin/sh Oct 24 13:44:00 space ? Oct 24 13:44:14 after fill in Oct 24 13:44:19 root:sctGrN6AXXXXX:0:0:root:/root:/bin/sh Oct 24 13:45:00 so it is Oct 24 13:45:16 i have t1PLU******** Oct 24 13:45:19 to enter in ? Oct 24 13:45:33 username:your_coded_pw:useid:groupid:comment:homedirectory:loginshell Oct 24 13:45:54 yes, what you're wrote down Oct 24 13:45:54 how do i enter letters ? Oct 24 13:45:57 how to edit ? Oct 24 13:46:09 nothing is typing Oct 24 13:46:12 as i mentioned before, hit i for insert Oct 24 13:46:51 ok done Oct 24 13:46:53 how to save Oct 24 13:46:55 ? Oct 24 13:46:59 press esc once Oct 24 13:47:03 then type :w followed by enter Oct 24 13:47:05 ok Oct 24 13:47:10 that saves it. Oct 24 13:47:19 ok Oct 24 13:47:20 :q quits vi and returns you to your other problems in linux Oct 24 13:47:36 aka; 's hell Oct 24 13:47:39 .../mnt/passwd 10L. 330c Oct 24 13:47:44 it says Oct 24 13:47:48 after w: Oct 24 13:47:57 that's just vi saying "woot, i saved 10lines and .. something" Oct 24 13:48:06 and everything is still on screen Oct 24 13:48:10 how to get back to prompt Oct 24 13:48:17 read: type :q and hit enter to quit vi Oct 24 13:48:30 and return to a life of misery in (s)hell Oct 24 13:48:30 ok done Oct 24 13:48:37 so what has that done Oct 24 13:48:38 so, cat /share/hdd/conf/passwd Oct 24 13:48:45 copied the hashed passwd from where to wher e? Oct 24 13:49:08 so now can i reboot and should be able to login Oct 24 13:49:16 and verify the password field with that you've wrote down, if it's equal reboot with disk attached Oct 24 13:49:18 or will it return to factory passes after reboot ? Oct 24 13:49:30 ok rebooting now Oct 24 13:49:42 the system is going down now Oct 24 13:50:01 heh Oct 24 13:50:07 anarchy! Oct 24 13:50:13 lol Oct 24 13:50:38 they should keep a worldwide record of the amount of reboots required by each OS Oct 24 13:50:40 ill never upgrade from v5.5 Oct 24 13:50:42 or actually Oct 24 13:50:54 ok its beeped Oct 24 13:50:56 they should keep a worldwide record of the amount of reboots done for each OS Oct 24 13:50:57 all back up Oct 24 13:51:19 ive enabled telnet again Oct 24 13:51:22 now what caplink Oct 24 13:51:30 that way people would want to make it to the top by rebooting a LOT Oct 24 13:51:35 that'd be fun Oct 24 13:51:47 YEA im logged in with hard drive connected Oct 24 13:51:48 woot Oct 24 13:51:52 woot Oct 24 13:51:59 now next problem = Oct 24 13:52:00 IPKG Oct 24 13:52:03 doesnt work :( Oct 24 13:52:11 k Oct 24 13:52:17 do i need to unsling v5 to hdd Oct 24 13:52:24 ipkg doesn't work mean??? Oct 24 13:52:33 oh its working now Oct 24 13:52:36 bloody hell Oct 24 13:52:38 works Oct 24 13:52:42 stop Oct 24 13:52:46 in the name of love Oct 24 13:52:49 ipkg update Oct 24 13:52:51 shit oo late Oct 24 13:52:54 done that above now Oct 24 13:52:59 ipkg update done Oct 24 13:53:00 please verify, that the rootfs is on your disk, and not on the flas Oct 24 13:53:01 h Oct 24 13:53:06 how Oct 24 13:53:14 use the force luke Oct 24 13:53:22 no, use the df command Oct 24 13:53:31 rootfs mounted on / Oct 24 13:53:43 the size of rootfs should equal to the size of /dev/sda1 Oct 24 13:53:51 yes Oct 24 13:53:53 38% Oct 24 13:54:28 so you've unslinging to disk before, that fine, there is another command, described in the readme Oct 24 13:54:30 what next Oct 24 13:54:47 iTHINK i have Oct 24 13:54:55 just a moment must have a look in the dir Oct 24 13:54:57 almost at the end of the readme there is something that deals with a situation where you are upgrading Oct 24 13:55:36 6) If you wish to migrate your packages from the old Unslung 3.x location in Oct 24 13:55:36 the /share/hdd/conf (disk1) or /share/flash/conf (disk2) partitions to the Oct 24 13:55:36 new Unslung 4.x and 5.x location on the data partition, then run: Oct 24 13:55:36 "/sbin/slingover disk1" Oct 24 13:55:55 If you wish to migrate your packages from the old Unslung 3.x location in Oct 24 13:55:59 that bit ? Oct 24 13:56:08 thanks, oO[NOVA]Oo Oct 24 13:56:12 yes that bit Oct 24 13:56:32 yesterday i had to reflash my nslu2 like 3 times Oct 24 13:56:34 well Oct 24 13:56:37 strictly speaking this morning Oct 24 13:56:38 # /sbin/slingover disk1 Oct 24 13:56:39 Source disk is /share/hdd/conf Oct 24 13:56:39 Target disk is /share/hdd/data Oct 24 13:56:41 thats whats its said Oct 24 13:56:41 i kinda missed a night Oct 24 13:56:57 that correct ? Oct 24 13:57:03 sounds okay Oct 24 13:57:10 i never upgraded Oct 24 13:57:15 so, if you do a "ipkg list_installed" it show you installed packages Oct 24 13:57:17 but i don't see any errorz Oct 24 13:57:42 ccxstream is installed Oct 24 13:57:49 but i also installed dropbear on v3 Oct 24 13:57:50 its not listed Oct 24 13:57:57 mmmm Oct 24 13:58:27 scotty, can you give me more power? i mean, explanations? Oct 24 13:58:32 erm Oct 24 13:58:40 oO[NOVA]Oo, on what topic? Oct 24 13:58:42 do i just ipkg install dropbear ? Oct 24 13:58:51 i also want to install EDNA Oct 24 13:58:58 it says it requires python to be installed Oct 24 13:59:08 caplink811; vsftpd and getting the /etc/passwd file to match what vsftpd seems to want from me :-S Oct 24 13:59:15 so how do i get dropbear EDNA and python on ? Oct 24 13:59:20 well python should be a package too, right? Oct 24 13:59:25 so Oct 24 13:59:29 ipkg install edna Oct 24 13:59:33 ipkg install dropbear Oct 24 13:59:36 magma82; one would assume through ipkg install python and such Oct 24 13:59:36 ipkg install python Oct 24 13:59:45 that seems logical Oct 24 13:59:57 but i'm not a vulcan so.. Oct 24 14:00:03 or ipkg list | more and have a look at the avaiable packages Oct 24 14:00:03 cant find EDNA Oct 24 14:00:26 pyhton downlaoding :) Oct 24 14:00:41 mom ;) i must a look in the dependencies Oct 24 14:02:30 hm, dropbear depends on nothing Oct 24 14:02:42 what do u mean cap ? Oct 24 14:02:58 python is still downlloading Oct 24 14:03:22 dropbear don't depends on other packages, so it should install properly without downloading other things Oct 24 14:03:43 ya dropbear works on its own Oct 24 14:03:50 its EDNA that depends on python Oct 24 14:03:58 im making a http mp3 browser ya see Oct 24 14:04:02 forget EDNA Oct 24 14:04:08 hit control+c Oct 24 14:04:26 i dont wanna copy the file to my hdd Oct 24 14:04:33 i just wanny stream it from over the net Oct 24 14:04:43 say to an office pc Oct 24 14:06:13 i jsut saw EDNA on the nslu-linux site and thought tha would do the job Oct 24 14:06:18 also apache-mp3 can do it too Oct 24 14:06:52 i'm confused, i couldn't find anything about edna or EDNA in the package list Oct 24 14:07:09 http://www.nslu2-linux.org/wiki/Unslung/PackageWishList Oct 24 14:07:36 small MP3 server. Requires Python. EDNA (ver 0.5) works already on uNSLUng Oct 24 14:08:10 PackageWishList may implicate, that it is a want have wish ;) Oct 24 14:08:19 0EDNA (ver 0.5) works already on uNSLUng Oct 24 14:08:27 doesnt that mean its working on unslung ? Oct 24 14:08:51 could be, but it didn't exist as an instalable package Oct 24 14:08:52 ok so what cna i use to stream mp3 over http ??? Oct 24 14:09:09 and how do i UNinstall pyton which i just installed for EDNA Oct 24 14:09:23 dunno, myself streaming via twonkyvision, a upnp streaming server Oct 24 14:09:37 ipkg remove pythin Oct 24 14:09:41 ipkg remove python Oct 24 14:09:43 ya but i just wanna use winamp / media player on a pc over the net Oct 24 14:09:46 not uPNP Oct 24 14:09:52 i use ccxstream for xbox Oct 24 14:09:54 btw, ipkg --help may give you some options Oct 24 14:11:27 how do i do a ipkg list Oct 24 14:11:30 that symbol thing Oct 24 14:11:36 ./ Oct 24 14:11:40 the straight line thing Oct 24 14:12:15 GNUMP3d is that available to download ? Oct 24 14:12:32 well, there are no hints about edna in the repo, you can verify this by browsing http://cvs.sourceforge.net/viewcvs.py/nslu/unslung/make/ Oct 24 14:13:18 ive been wanting to stream mp3 from nslu for ages Oct 24 14:13:28 u know anything that can do it that is installable Oct 24 14:14:18 you can build mpd and mpc for your own, using the native developmant kit Oct 24 14:14:59 linux is foreign language to me m8 Oct 24 14:15:00 im no coder Oct 24 14:15:57 what symbol thing do you mean? | <- this? Oct 24 14:16:20 ya that Oct 24 14:17:23 on my keyboard, + Oct 24 14:17:56 but, it could be, that "more" isn't in the standard uNLSUng firmware Oct 24 14:18:08 oO[NOVA]Oo, msg you Oct 24 14:18:45 YEA dropbear is working :) Oct 24 14:18:48 woot Oct 24 14:18:57 potentia animi Oct 24 14:21:24 | Oct 24 14:21:27 | Oct 24 14:21:30 | Oct 24 14:21:32 ok Oct 24 14:21:33 got it Oct 24 14:22:21 right it doesnt wokr Oct 24 14:22:29 how do i search page by page Oct 24 14:22:37 as theres too many to fit on my screen Oct 24 14:25:39 you should go to Oct 24 14:26:03 http://ipkgfind.nslu2-linux.org/ Oct 24 14:26:21 and search for a package which provides less or more Oct 24 14:26:31 and install it Oct 24 14:27:10 so you can piping the output to less or more via ipkg list|more or ipkg list| less Oct 24 14:27:37 is there a way to stream via http ? Oct 24 14:27:39 with nslu ? Oct 24 14:27:58 i just want a basic list on a http and click the file and winamp buffers the file and plays it Oct 24 14:28:00 you can try to install perl Oct 24 14:28:23 and then you could install slimwerver Oct 24 14:28:50 slimwerver / Oct 24 14:28:52 ? Oct 24 14:31:01 www.slimdevices.com , imho Oct 24 14:31:37 doesnt it need a slim box ? Oct 24 14:31:43 or will it communicate with winamp Oct 24 14:31:47 ? Oct 24 14:33:05 it communicate with any client at http prot on port 9001 imho Oct 24 14:35:07 nice one Oct 24 14:35:16 12.1mb Oct 24 14:35:17 eek Oct 24 14:35:20 slimserver is huge Oct 24 14:35:25 not very slim Oct 24 14:35:39 you're James Cummings? Oct 24 14:36:23