**** BEGIN LOGGING AT Thu Dec 29 02:59:58 2005
Dec 29 05:41:56 <Madkiss> mooh
Dec 29 05:53:11 <bazz-_> nice hostname
Dec 29 06:14:04 <drif> anyone around?
Dec 29 06:15:03 <drif> could someone paste their /etc/rc.d/rc.xinetd to http://pastebin.ca/   ?
Dec 29 06:15:49 <drif> in case you're using unslung 5.5
Dec 29 06:18:12 <drif> hi acw43, using unslung?
**** BEGIN LOGGING AT Thu Dec 29 06:48:40 2005
Dec 29 06:48:50 <caplink811_log> seems so
**** BEGIN LOGGING AT Thu Dec 29 06:56:54 2005
Dec 29 07:00:52 <bazz-> works fine here
Dec 29 07:08:50 <Madkiss> What is the Unslung-Default-Password?
Dec 29 07:08:56 <Madkiss> oh wait
Dec 29 07:09:06 <Madkiss> saw the faq ... 
Dec 29 07:09:14 <Madkiss> Describe FAQ here.
Dec 29 07:09:16 <Madkiss> well, okay.
Dec 29 07:09:20 <Madkiss> So what is it? ;)
Dec 29 07:20:56 <Madkiss> Is it right that the current UnSlung does not contain tune2fs?
Dec 29 07:23:38 <caplink811_log> this could be in the e2fsprogs package
Dec 29 07:27:23 <Madkiss> ah, I see, I noticed my mistake too, tho ...
Dec 29 07:41:29 <Madkiss> gnaa, this stupid son of a bitch refuses to format my usbstick
Dec 29 07:44:53 <Madkiss> It doesn't even copy anything over there once I click on "format disk 1"
Dec 29 07:46:14 <Oli> Hi all
Dec 29 07:46:33 <Oli> anyone willing to answer a vsftd Q?
Dec 29 07:47:35 <FB[i]> caplink811_log you helped me whit my instalation of syslog-ng yesterday and I got it upp and running but ....how du I get it to loggt from my checkpoint FW ( I have configured my fw to logg to the address of my nslu2 box on port 514)
Dec 29 07:48:15 <FB[i]> but I dont know how to conf the syslog to resive the the info
Dec 29 07:48:37 <caplink811_log> FB[i], one moment pls
Dec 29 07:49:01 <FB[i]> np :)
Dec 29 07:49:37 <Oli> FBi (while u wait ) are you running vsftpd by any chance?
Dec 29 07:51:49 <FB[i]> no not yet ;)
Dec 29 07:52:02 <FB[i]> what is you problem?
Dec 29 07:52:20 <caplink811_log> FB[i],  http://pastebin.com/482869 this is my config, and this line -> source net { udp( ); };
Dec 29 07:52:35 <Oli> oh, as soon as my Slug is out in the 'open' I am getting brute force attacks, Korea etc...
Dec 29 07:52:53 <caplink811_log> defines that all devices on the net could log to my syslog-ng
Dec 29 07:52:54 <FB[i]> cap tnx
Dec 29 07:53:10 <FB[i]> Oli hmmm 
Dec 29 07:53:14 <Oli> so I was wondering if I can ban IP adresses after 5 consecutive failed logins
Dec 29 07:53:21 <Madkiss> Following the HowTo on http://www.nslu2-linux.org/wiki/HowTo/UseAMemoryStickAsMainDrive, shouldn't my / be on /dev/sda1 after a reboot
Dec 29 07:53:23 <FB[i]> I think so
Dec 29 07:53:39 <caplink811_log> there is also a log and a destination statement for this source
Dec 29 07:54:09 <FB[i]> cap tnx
Dec 29 07:54:35 <caplink811_log> Madkiss,  if you have done a /sbin/unsling disk1 before the reboot,m yes
Dec 29 07:54:51 <Madkiss> hu, ha, aah!
Dec 29 07:54:53 <Oli> I cant find the vsftpd settings for that or do I have to use something else?
Dec 29 07:55:13 <caplink811_log> Oli,  what is your problem with vsftpd?
Dec 29 07:55:34 <Oli> I am getting brute force attacks, a lot, from all places on this planet
Dec 29 07:55:51 <Oli> last was Korea hammering away for 6-8 hours
Dec 29 07:56:27 <Oli> so I want to ban those suckers, best would be to specify a max_failed_login
Dec 29 07:56:48 <Oli> no one got in so far :)
Dec 29 07:57:48 <Oli> or at least resuse the connection for 1 hour after 5 or 3 filed logins
Dec 29 07:57:57 <Oli> refuse*
Dec 29 07:58:27 <caplink811_log> Oli,  did you read that http://vsftpd.beasts.org/vsftpd_conf.html ?
Dec 29 07:58:52 <Oli> yep, could not find it there. Am I blind?
Dec 29 07:59:17 <caplink811_log> if it isn't in, then that feature doesn't exist, i think
Dec 29 07:59:53 <Oli> ok, too bad, do u guy know of another way to secure yourself against brute force?
Dec 29 07:59:59 <FB[i]> give me 5 min and IŽl check
Dec 29 08:00:05 <Oli> cool thx
Dec 29 08:01:20 <Oli> I wrote C code a long time ago, now its mostly Java and C#, do you guys think that would be a good feature
Dec 29 08:01:41 <Oli> maybe I can try to implement it?
Dec 29 08:02:19 <Madkiss> some iptables-cron-mix should do the trick
Dec 29 08:02:49 <caplink811_log> or anything with a tcp-wrapper..
Dec 29 08:04:21 <Oli> so vsftp would need to give a feedback of consecutive failed logins?
Dec 29 08:05:10 <Oli> how do the wrappers know who to ban?
Dec 29 08:10:47 <Madkiss> /dev/sda1 on / type ext3 (rw)
Dec 29 08:10:49 <Madkiss> arrrr
Dec 29 08:11:26 <caplink811_log> just an idea, dunno,maybe that another server (proftpd?) contains such a feature
Dec 29 08:12:16 <bazz-> http://www.rfxnetworks.com/bfd.php
Dec 29 08:12:44 <bazz-> bash script which uses cron, checks in logs for login attempts etc.
Dec 29 08:13:13 <bazz-> i think it'd work on the slug too
Dec 29 08:14:38 <bazz-> Madkiss: i think you want this: http://www.nslu2-linux.org/wiki/FAQ/RootOnAUSBFlash
Dec 29 08:17:17 <Oli> Thanks guys!
Dec 29 08:20:36 <Madkiss> How do I install ghostscript / ps on the slug?
Dec 29 08:22:36 <FB[i]> <caplink811_log> source cpfw { udp(ip(192.168.0.1)); }; 
Dec 29 08:22:46 <FB[i]> is the ip the nslu2 or the firewall ?
Dec 29 08:23:28 <caplink811_log> it is the source device
Dec 29 08:23:44 <FB[i]> http://pastebin.com/482906
Dec 29 08:23:53 <FB[i]> ok the firewall then
Dec 29 08:24:02 <FB[i]> but check my paste
Dec 29 08:25:36 <bazz-> madkiss ipkg install ghostscript
Dec 29 08:25:59 <caplink811_log> well, ok, seems that parameter is the network adress on which syslog-ng would bind, aka one of the ip's of the nslu
Dec 29 08:26:05 <caplink811_log> haven't try this
Dec 29 08:26:18 <FB[i]> k
Dec 29 08:26:35 <FB[i]> I play around with it and see what I can find out
Dec 29 08:27:18 <FB[i]> IŽl report l8r ;)
Dec 29 08:28:48 <Madkiss> bazz-: uh.
Dec 29 08:29:04 <Madkiss> phatmonkey^iBook: Your RDNS is b0rk3d
Dec 29 08:29:22 <littlewhitey> arpa rdns looks pretty cool
Dec 29 08:29:26 * littlewhitey breaks his rdns
Dec 29 08:29:30 <phatmonkey^iBook> what what now?
Dec 29 08:29:35 <Madkiss> littlewhitey: Not in my world
Dec 29 08:29:37 <littlewhitey> [15:29:11] * phatmonkey^iBook (n=phatmonk@65.98.2.81.in-addr.arpa) has joined #nslu2-general
Dec 29 08:29:59 <phatmonkey^iBook> hmm...
Dec 29 08:30:52 <Madkiss> bazz-: I must be stupid; I tried "ipkg install gs" ;)
Dec 29 08:31:56 <bazz-> i guess so :p
Dec 29 08:32:09 <bazz-> try ipkg list | grep whateveryouwant
Dec 29 08:32:13 <Madkiss> this little thing will make a very nice cups print server
Dec 29 08:32:14 <bazz-> after ipkg update
Dec 29 08:33:26 <Madkiss> No zsh package? -sigh-
Dec 29 08:33:59 <bazz-> you can compile that yourself 
Dec 29 08:34:40 <bazz-> or try debonaras or even openslug, the package repository is larger for those i think
Dec 29 08:43:09 <Madkiss> arr, the thing does not recognize my printer
Dec 29 08:43:11 <Madkiss> or ...
Dec 29 08:43:13 <Madkiss> uhm, wait.
Dec 29 08:44:32 <Madkiss> uhm, nope, putting the flash stick into USB-port 2 does not work
Dec 29 08:44:37 <Madkiss> so where's the trick?
Dec 29 08:45:44 <bazz-> no idea
Dec 29 08:45:52 <bazz-> didn't try a stick yet
Dec 29 08:47:45 <Madkiss> "lsusb" doesn't even show the printer
Dec 29 08:52:23 <FB[i]> <caplink811_log> did you create your dir manualy or did the syslog creat them ? (("/opt/var/log/syslog-ng/$YEAR/$MONTH/$HOST-$YEAR-$MONTH-$DAY-lpr.log"); )
Dec 29 08:53:06 <FB[i]> becourse I get this
Dec 29 08:53:07 <FB[i]> Cannot open file /opt/var/log/syslog-ng/2005/12/my-2005-12-29-net1 for writing (No such file or directory)
Dec 29 08:53:15 <FB[i]> ahhh
Dec 29 08:53:17 <FB[i]> got it
Dec 29 08:53:18 <FB[i]> nm
Dec 29 08:54:05 <caplink811_log> FB[i],  manually
Dec 29 08:54:55 <FB[i]> :)
Dec 29 08:58:08 <FB[i]> working now !
Dec 29 08:58:24 <FB[i]> tnx cap
Dec 29 11:15:23 <Sna> hello...
Dec 29 11:15:49 <Sna> does anyone have experience on the torrent package under unslung?
Dec 29 11:16:27 <Sna> i haven't found any information on the network
Dec 29 11:16:39 <Sna> there is only the link to the author
Dec 29 11:17:12 <Sna> is it possible to get this package to work?
Dec 29 11:18:01 <Sna> would be nice... it has a web interfaceand supports multiple torrents
Dec 29 11:18:57 <Sna> ??
Dec 29 11:21:22 <drif> hi sna
Dec 29 11:21:43 <Sna> hi drif
Dec 29 11:21:56 <Sna> u know this package?
Dec 29 11:22:33 <Sna> i mean the "torrent" package wich uses the btlib.
Dec 29 11:23:07 <drif> torrent - 1.1-1 - a collection of scripts that processes torrent files ?
Dec 29 11:23:20 <Sna> yes
Dec 29 11:23:43 <Sna> exactly... it has a nice interface.. but seems to have some bugs
Dec 29 11:23:57 <drif> such?
Dec 29 11:26:07 <Sna> there are some functions not available on unslung like logger or uptime
Dec 29 11:26:24 <Sna> and it hangs on my system if i want to remove torrents
Dec 29 11:26:45 <Sna> with the function torrent_admin -r TORRENT-NUMBER
Dec 29 11:27:04 <Sna> without any warning or error
Dec 29 11:27:38 <Sna> i removed the logger command and replaced it by echos...
Dec 29 11:28:28 <Sna> so it works without errors... but doesn't seem to do the right thing
Dec 29 11:29:40 <Sna> am I right that i start it with torrent_admin update?
Dec 29 11:30:02 <Sna> then with ps i can see cron running...
Dec 29 11:30:22 <Sna> but nut btget. Is this correct?
Dec 29 11:39:07 <bazz-> i use py-bitorrent 
Dec 29 11:44:44 <bazz-> i didn't like the web thing
Dec 29 11:45:34 <Madkiss> How do I change something in the fstab file?
Dec 29 11:47:12 <Sna> i'm a step further... forgot that I've uninstalled the coreutils
Dec 29 11:47:41 <Sna> @bazz: maybe i try py-bittorrent afterwards
Dec 29 11:49:47 <caplink811_log> Madkiss,  edit ?!
Dec 29 11:52:40 <Madkiss> caplink811_log: okay, but after a reboot, all changes are gone
Dec 29 11:53:17 <bazz-> copy it to /share/hdd/conf or what was it caplink
Dec 29 11:53:27 <caplink811_log> well, so one of linksys progs write it new within a reboot
Dec 29 11:54:14 <caplink811_log> Madkiss,  what is your target with this file ?
Dec 29 11:54:34 <bazz-> fstab is for setting up mounts
Dec 29 11:55:34 <caplink811_log> i know this fact ;)
Dec 29 11:56:40 <Boomcar> Morning all ;o)
Dec 29 11:56:58 <Boomcar> yes I did it!!
Dec 29 11:57:44 <caplink811_log> we know that you prefer you wife ;)
Dec 29 11:57:51 <Boomcar> lol
Dec 29 11:57:54 <caplink811_log> s/you/your/g
Dec 29 11:58:00 <Boomcar> no I reformated
Dec 29 11:58:08 <caplink811_log> without saving?
Dec 29 11:58:13 <Boomcar> yes
Dec 29 11:58:18 <caplink811_log> :(
Dec 29 11:58:26 <Boomcar> telephone call
Dec 29 11:58:28 <Boomcar> wait
Dec 29 12:14:40 <Boomcar> Caplink_log still there?
Dec 29 12:14:53 <caplink811-log> again, yes
Dec 29 12:14:56 <Boomcar> k
Dec 29 12:14:58 <Boomcar> see
Dec 29 12:15:26 <Boomcar> I did df and I only see 1 mountdblock4
Dec 29 12:15:30 <Boomcar> is that fine?
Dec 29 12:15:43 <Boomcar> I also see the sda1 and 2
Dec 29 12:16:12 <caplink811-log> booting from flash, or with hd attached?
Dec 29 12:16:23 <Boomcar> with hd attached
Dec 29 12:16:52 <Boomcar> when I start without the hd and attach it later it isn't recognised
Dec 29 12:17:21 <Madkiss> caplink811-log: hu?
Dec 29 12:17:53 <caplink811-log> Madkiss,  why would you edit /etc/fstab  ?
Dec 29 12:18:30 <Madkiss> caplink811-log: because I wwant to add noatime to /
Dec 29 12:19:22 <Boomcar> caplink: when I start without the hd and attach it later it isn't recognised
Dec 29 12:19:49 <caplink811_log> Boomcar,  is it formatted at the nslu?
Dec 29 12:19:53 <Boomcar> yes
Dec 29 12:20:05 <Boomcar> and when I boot the hd first it works fine
Dec 29 12:20:17 <Boomcar> when I df I see:
Dec 29 12:20:28 <Boomcar> rootfs                    6528      5328      1200  82% /
Dec 29 12:20:43 <Boomcar> dev/mtdblock4            6528      5328      1200  82% /
Dec 29 12:20:54 <Boomcar> dev/sda1            195843204     32932 193820624   0% /share/hdd/data
Dec 29 12:21:04 <Boomcar> dev/sda2               116661      4148    111309   4% /share/hdd/conf
Dec 29 12:21:06 <Boomcar> all
Dec 29 12:21:27 <Boomcar> is that okay?
Dec 29 12:21:35 <caplink811_log> if you don't unsling until yet, then it is ok
Dec 29 12:21:54 <Boomcar> k
Dec 29 12:22:05 <Boomcar> now I am going to unsling it
Dec 29 12:22:40 <Boomcar> sbin/unsling disk1 ??
Dec 29 12:23:03 <caplink811_log> Madkiss,  you should look in /etc/rc.d (dunno which file), but during boot 1st the disk/stick is mounted ro, and later it will remounted rw, maybe that is the place to change some mount options
Dec 29 12:23:05 <Boomcar> it's been a while ;o)
Dec 29 12:23:28 <caplink811_log> Boomcar,  if it is plugged in port one, yes
Dec 29 12:23:45 <Boomcar> yes
Dec 29 12:25:39 <Boomcar> when I did this then passwd root ??
Dec 29 12:26:09 <caplink811_log> is uNSLUng 
Dec 29 12:26:38 <Boomcar> I mean enter: passwd root
Dec 29 12:26:43 <Boomcar> or reboot?
Dec 29 12:29:47 <caplink811_log> so, after you run unsling, reboot without hd, enable telnet, login with root/uNSLUng and attach the disk
Dec 29 12:33:44 <Boomcar> k done
Dec 29 12:33:46 <Boomcar> now?
Dec 29 12:37:54 <drif> anyone using screen+py-bittorrent?
Dec 29 12:38:21 <Boomcar> nope
Dec 29 12:38:25 <drif> or bittorrent-curses
Dec 29 12:38:29 <Madkiss> caplink811_log: and how do I change the rootpasswd?
Dec 29 12:39:26 * bazz- screen + bittorrent-curses
Dec 29 12:40:15 <drif> bazz: do you ever get your bittorrent-curses killed when starting a new one?
Dec 29 12:40:28 <bazz-> no
Dec 29 12:40:35 <bazz-> unless you're out of memory
Dec 29 12:40:38 <caplink811_log> Madkiss,  there is a page in the wiki on this topic, basically you can add a user (webif) wrote the pw down, then edit /share/hdd/conf/passw and copy the crypted pw of your new user to the pw field from user root, thats it
Dec 29 12:40:59 <drif> bazz-: I have it running on hdd and 50Megs swap - :-\ but that still occures
Dec 29 12:41:24 <bazz-> i wouldn't advise more than 2 bittorrents at the same time 
Dec 29 12:41:29 <caplink811_log> Boomcar,  same for you (what i wrote for Madkiss )
Dec 29 12:41:38 <bazz-> unless you set up your swap higher
Dec 29 12:41:40 <drif> well haven't tried more than two
Dec 29 12:41:40 * Madkiss will forget about it
Dec 29 12:41:43 <drif> but only one is stabile :-\
Dec 29 12:41:48 * bazz- has 500 meg swap :)
Dec 29 12:42:06 <bazz-> you got any other services/ things running on the slug?
Dec 29 12:42:20 <drif> not really
Dec 29 12:42:42 <bazz-> try `free` when you load up 1 bittorrent
Dec 29 12:42:51 <bazz-> and see if you still have enough memory to launch another
Dec 29 12:43:11 <Boomcar> when I vi /share/hdd/conf/passw its blank?!
Dec 29 12:43:14 <bazz-> oh and something else: is your slug oc'ed?
Dec 29 12:43:25 <drif> bazz: nope, not yet
Dec 29 12:43:34 <drif> cpu was also what I suspected
Dec 29 12:43:35 <bazz-> hrmm
Dec 29 12:43:51 <caplink811_log> Boomcar,  that shouldn't, your hd is attached and recognised?
Dec 29 12:43:52 <bazz-> i can do 3 simultaneously, but it gets awfully slow
Dec 29 12:44:19 <drif> bazz: I assume yours is?
Dec 29 12:44:26 <bazz-> also running 3x sshd, bitlbee, xinetd, smb, screen, irssi
Dec 29 12:44:30 <bazz-> yes
Dec 29 12:44:34 <Boomcar> nope
Dec 29 12:44:40 <Boomcar> 5 mins please
Dec 29 12:44:41 <drif> bazz: irssi? how did you get that?
Dec 29 12:44:43 <Madkiss> So after all, buying the slug was my 2nd best decision this year.
Dec 29 12:44:53 <caplink811_log> mad, and the best?
Dec 29 12:44:54 <bazz-> i compiled it from cvs
Dec 29 12:44:59 <caplink811_log> Madkiss,  and the best?
Dec 29 12:45:08 <Madkiss> caplink811_log: Buying the PowerBook
Dec 29 12:45:21 <caplink811_log> :)
Dec 29 12:45:31 <Madkiss> After all, I bought the slug for the powerbook ...
Dec 29 12:45:39 <Madkiss> so that I can print stuff without switching on my workstation
Dec 29 12:45:40 <bazz-> if you know how to package things, i'll give you a temp account and do it so other people can ipkg install it :p
Dec 29 12:45:50 <Madkiss> Because now, it serves as printserver
Dec 29 12:46:08 <drif> bazz: how did you obtain the sources?
Dec 29 12:46:23 <bazz-> try ww.irssi.org :)
Dec 29 12:47:58 <bazz-> and http://www.nslu2-linux.org/wiki/HowTo/NativelyCompileUnslungPackages and http://www.nslu2-linux.org/wiki/HowTo/NativeDevelopmentSetup
Dec 29 12:48:10 <drif> isn't it down atm
Dec 29 12:48:55 <drif> ah, just slow this time
Dec 29 12:48:55 <bazz-> nope i can access it
Dec 29 12:50:12 <drif> bazz: so you compiled on slug?
Dec 29 12:50:16 <bazz-> yep 
Dec 29 12:50:27 <bazz-> it took me a while, but the cvs version works
Dec 29 12:50:39 <drif> not possible with the crosstool?
Dec 29 12:50:44 <bazz-> you should install some libraries first like glib2 etc.
Dec 29 12:51:00 <bazz-> in theory yes, but i don't know how one would do that
Dec 29 12:51:22 <bazz-> there's one bug though: dcc chat/sends crash irssi client
Dec 29 12:51:59 <bazz->  /ignore * dcc :p
Dec 29 12:52:16 <drif> :P
Dec 29 12:52:31 <bazz-> also compiled bitlbee's latest (back then, now there's a newer release)
Dec 29 12:52:43 <bazz-> so screen + irssi + bitlbee is kinda cool
Dec 29 12:54:36 <drif> bazz: I've heard there's some probs with hdds when using the original power adapter with oc'd cpu?
Dec 29 12:55:02 <bazz-> didn't have any problems yet
Dec 29 12:55:12 <bazz-> nor on my brother's slug
Dec 29 12:55:28 <drif> and that's an easy process?
Dec 29 12:55:41 <bazz-> had 1 problem, but that's probably nothing to do with the oc
Dec 29 12:56:04 <bazz-> 2.5" unpowered/powered hdd's don't do well
Dec 29 12:56:12 <bazz-> perhaps it was the housing
Dec 29 12:56:13 <drif> bazz: which unslung you're using?
Dec 29 12:56:28 <bazz-> the latest i think 5.5
Dec 29 12:57:21 <drif> bazz: hm, could you anyhow get me that compiled irssi bin? :-\
Dec 29 12:57:32 <bazz-> sure
Dec 29 12:57:36 <drif> :)
Dec 29 12:57:44 <bazz-> you'll need binaries though
Dec 29 12:57:51 <bazz-> i mean libraries
Dec 29 12:57:52 <drif> ?
Dec 29 12:57:54 <drif> ah
Dec 29 12:57:58 <bazz-> bit confused :p
Dec 29 12:58:03 <drif> but those are available from ipkg?
Dec 29 12:58:26 <bazz-> i don't know
Dec 29 12:58:32 <drif> which libs
Dec 29 12:58:37 <bazz-> i did quite some non-ipkg stuff :)
Dec 29 12:59:06 <bazz-> i'll include them too
Dec 29 12:59:11 <bazz-> just did ldd irssi
Dec 29 12:59:15 <bazz-> shows all modules
Dec 29 12:59:39 <Boomcar> Caplink: back again (kids are asleep) ;o)
Dec 29 13:00:02 <Boomcar> when I df: /dev/mtdblock4            6528      5328      1200  82% /
Dec 29 13:00:49 <Boomcar> that's all!
Dec 29 13:02:23 <Boomcar> that's no good ;o(
Dec 29 13:02:36 <drif> boomcar: what's the setup?
Dec 29 13:03:48 <caplink811_log> Boomcar,  now the disk is attached ? and powered on ??
Dec 29 13:04:08 <Boomcar> yes ;o)
Dec 29 13:04:21 <Boomcar> @ drif? what setup?
Dec 29 13:04:44 <drif> media you've unslung to
Dec 29 13:05:10 <Boomcar> as I told earlier: when I boot with hd attached and on everything works fine
Dec 29 13:05:17 <Boomcar> disk1
Dec 29 13:06:35 <bazz-> still gzipping ;)
Dec 29 13:06:53 <drif> bazz ;P I was about to ask
Dec 29 13:07:05 <bazz-> thought so :p
Dec 29 13:07:51 <Boomcar> should I reboot with the hd attached?
Dec 29 13:08:08 <Boomcar> or mount the hd to change the root pwd
Dec 29 13:09:11 <Boomcar> dmesg gives me:
Dec 29 13:09:23 <drif> boomcar: remember to update also /share/hdd/conf/passwd
Dec 29 13:09:29 <Boomcar> Partition check:
Dec 29 13:09:29 <Boomcar> WARNING: USB Mass Storage data integrity not assured
Dec 29 13:09:29 <Boomcar> USB Mass Storage device found at 2
Dec 29 13:09:29 <Boomcar> usb.c: USB disconnect on device 00:01.2-1 address 2
Dec 29 13:09:29 <Boomcar> hub.c: new USB device 00:01.2-1, assigned address 3
Dec 29 13:09:29 <Boomcar> 31 port connect
Dec 29 13:09:31 <Boomcar> WARNING: USB Mass Storage data integrity not assured
Dec 29 13:09:33 <Boomcar> USB Mass Storage device found at 3
Dec 29 13:10:06 <Boomcar> @drif: how do I get to that file if the hd isn't recognised?
Dec 29 13:10:28 <drif> this one kinda gets me confused:
Dec 29 13:10:29 <drif> 22:05 < Boomcar> as I told earlier: when I boot with hd attached and on
Dec 29 13:10:29 <drif>                  everything works fine
Dec 29 13:10:44 <Boomcar> the hd is recognised
Dec 29 13:10:46 <bazz-> drif: forgot one file, i'll add that and repackage it
Dec 29 13:10:49 <drif> but you can't login?
Dec 29 13:10:54 <Boomcar> mmm
Dec 29 13:11:03 <drif> bazz-: I'm in no hurry
Dec 29 13:11:06 <Boomcar> the telnet pw is not unslung then?>
Dec 29 13:11:26 <Boomcar> with the caps
Dec 29 13:11:41 <drif> could also be admin I recall
Dec 29 13:11:44 <drif> if
Dec 29 13:11:45 <caplink811_log> Boomcar,  when you boot with hd attached, then nobody knows the root pw
Dec 29 13:11:55 <Boomcar> thats what I meant
Dec 29 13:12:03 <Boomcar> but did u read the lines above
Dec 29 13:12:13 <Boomcar> this is what I get when I dmesg
Dec 29 13:12:26 <Boomcar> Partition check:
Dec 29 13:12:26 <Boomcar> WARNING: USB Mass Storage data integrity not assured
Dec 29 13:12:26 <Boomcar> USB Mass Storage device found at 2
Dec 29 13:12:26 <Boomcar> usb.c: USB disconnect on device 00:01.2-1 address 2
Dec 29 13:12:26 <Boomcar> hub.c: new USB device 00:01.2-1, assigned address 3
Dec 29 13:12:27 <Boomcar> 31 port connect
Dec 29 13:12:29 <Boomcar> WARNING: USB Mass Storage data integrity not assured
Dec 29 13:12:31 <Boomcar> USB Mass Storage device found at 3
Dec 29 13:12:32 <caplink811_log> but the problem is, that your partitions wouldn't automounted
Dec 29 13:12:40 <Boomcar> yes
Dec 29 13:12:52 <Boomcar> what config file is responsible for that?
Dec 29 13:13:02 <Boomcar> or do I need to reflash?
Dec 29 13:13:57 <Boomcar> I think its weird that I only get this:
Dec 29 13:14:09 <Boomcar> Filesystem           1k-blocks      Used Available Use% Mounted on
Dec 29 13:14:09 <Boomcar> rootfs                    6528      5328      1200  82% /
Dec 29 13:14:21 <Boomcar> I thought I had to have the last line 3 times?
Dec 29 13:14:23 <Boomcar> !
Dec 29 13:14:45 <caplink811_log> my suggestion: to be on the save side, put the disk on a win box, delete the 3 partitions on it, make a little ntfs partition, and then put it back on the nslu, format it there, and then unsling once more
Dec 29 13:15:31 <bazz-> you can also use dd to write bogus data on the disk
Dec 29 13:15:32 <Boomcar> thats what I did five oçlock
Dec 29 13:15:38 <bazz-> so you need to reformat
Dec 29 13:16:01 <Boomcar> Windows doesn't recognise the disk
Dec 29 13:16:05 <Boomcar> its ext 
Dec 29 13:16:06 <Boomcar> 3
Dec 29 13:16:16 <Boomcar> I used partition magic'
Dec 29 13:16:27 <Boomcar> is that fine too?
Dec 29 13:16:29 <bazz-> it should recognise the disk, but it's normal that it doesn't recognise the partitoin
Dec 29 13:16:38 <Boomcar> mmm
Dec 29 13:16:48 <Boomcar> how do I see the disk in windows then?
Dec 29 13:17:02 <Boomcar> in the management console!
Dec 29 13:17:03 <bazz-> rightclick "my computer" -> manage
Dec 29 13:17:07 <Boomcar> yes
Dec 29 13:17:09 <bazz-> disk thingie
Dec 29 13:17:24 <bazz-> almost there drif
Dec 29 13:17:32 <Boomcar> Ok...another project for tonight or tomorrow....
Dec 29 13:17:41 <Boomcar> Sometimes I hate it
Dec 29 13:17:43 <drif> boomcar: what does fdisk -l /dev/sda give you?
Dec 29 13:17:45 <Boomcar> when my wife
Dec 29 13:17:50 <Boomcar> comes home
Dec 29 13:17:52 <Boomcar> ;o))
Dec 29 13:18:01 <bazz-> hehe
Dec 29 13:18:04 <caplink811_log> Boomcar,  it's a challenge ;)
Dec 29 13:18:11 <Boomcar>  Device Boot    Start       End    Blocks   Id  System
Dec 29 13:18:23 <Boomcar> dev/sda1             1     24770 198964993+  83  Linux
Dec 29 13:18:31 <Boomcar> dev/sda2         24771     24785    120487+  83  Linux
Dec 29 13:18:37 <Boomcar> dev/sda3         24786     24792     56227+  82  Linux swap
Dec 29 13:18:43 <Boomcar> looks fine
Dec 29 13:18:51 <Boomcar> I think
Dec 29 13:18:54 <caplink811_log> yes
Dec 29 13:19:03 <bazz-> http://bazz.nl.eu.org/slug/irssi.tar.gz
Dec 29 13:19:22 <drif> you could check /var/run when booting without hdd
Dec 29 13:19:26 <Boomcar> So why don't I see it when I do df
Dec 29 13:19:40 <caplink811_log> 4mb?
Dec 29 13:19:40 <Boomcar> var/run?
Dec 29 13:19:49 <bazz-> yep with all libs
Dec 29 13:20:00 <Boomcar> sorry goes beyond me
Dec 29 13:20:07 <caplink811_log> df only show you mounted partitions
Dec 29 13:20:07 <Boomcar> I am a windows man
Dec 29 13:20:11 <drif> there's usb_det.pid file
Dec 29 13:20:16 <Boomcar> ok
Dec 29 13:20:27 <Boomcar> so can I change the root pwd now?
Dec 29 13:20:30 <caplink811_log> fdisk shows you what is on the disk (partitions)
Dec 29 13:20:32 <drif> you could try removing it
Dec 29 13:20:50 <Boomcar> what file do I need to adjust?
Dec 29 13:20:52 <drif> then reboot
Dec 29 13:21:08 <drif> then see if it can automount it again
Dec 29 13:21:50 <Boomcar> what do I need to remove?
Dec 29 13:21:53 <drif> you could also try manual mounting
Dec 29 13:22:10 <caplink811_log> drif,  yes, i can remember, some time ago there was a similar problem
Dec 29 13:22:22 <Boomcar> I thought I had to change the root pwd
Dec 29 13:22:25 <Boomcar> then reboot
Dec 29 13:22:31 <Boomcar> with the hd attached
Dec 29 13:22:50 <drif> rm -f /var/run/usb_det.pid (when you have booted without hdd)
Dec 29 13:23:11 <Boomcar> The hd is attached but I didn't boot with it
Dec 29 13:23:17 <Boomcar> can I do the rm??
Dec 29 13:24:16 <bazz-> drif let me know if irssi works 
Dec 29 13:24:36 <caplink811_log> Boomcar,  you can read te procedure here http://www.nslu2-linux.org/wiki/FAQ/DiskNotRecognized
Dec 29 13:25:17 <Boomcar> thnx
Dec 29 13:27:56 <drif> bazz: still downloading
Dec 29 13:28:05 <bazz-> that slow?
Dec 29 13:28:12 <snotling> hello, has anyone succeeded at cross-compiling mldonkey ?
Dec 29 13:28:20 <Boomcar> wow it works!
Dec 29 13:28:43 <drif> bazz_ any clues why I'm not getting my vsftpd up and running :-\ I've added the lines to /unslung/rc.xinitd
Dec 29 13:29:01 <bazz-> dunno, didn't try vsftpd yet
Dec 29 13:29:12 <Boomcar> For this evening I only want to change the root pwd so I can sleep relaxed
Dec 29 13:29:19 <drif> boomcar: sorry I couldn't provide you with the url - having some probs accessing that site
Dec 29 13:29:20 <bazz-> try looking in /var/log/messages? try rnning it standalone?
Dec 29 13:29:50 <drif> bazz: how? it says it's configured not to run standalone
Dec 29 13:29:55 <caplink811_log> Boomcar,  what works? 
Dec 29 13:29:56 <Boomcar> k
Dec 29 13:30:03 <Boomcar> when I df
Dec 29 13:30:08 <Boomcar> I see:
Dec 29 13:30:16 <bazz-> To do this for a slug using an Unslung disk plugged into USB port 1, run these commands:    1. passwd 2. cp /etc/passwd /share/hdd/conf/passwd 
Dec 29 13:30:16 <Boomcar> rootfs                    6528      5324      1204  82% /
Dec 29 13:30:29 <Boomcar> dev/mtdblock4            6528      5324      1204  82% /
Dec 29 13:30:36 <Boomcar> dev/sda1            195843204     44264 193809292   0% /share/hdd/data
Dec 29 13:30:43 <Boomcar> dev/sda2               116661      4148    111309   4% /share/hdd/conf
Dec 29 13:30:51 <Boomcar> looks good to me
Dec 29 13:30:54 <drif> yup
Dec 29 13:30:56 <caplink811_log> Boomcar,  that is when the disk is automounted?
Dec 29 13:30:57 <bazz-> drif change the configuration? or try restarting xinetd
Dec 29 13:31:01 <Boomcar> yes
Dec 29 13:31:10 <caplink811_log> Boomcar,  k
Dec 29 13:31:11 <Boomcar> I booted without hd
Dec 29 13:31:21 <Boomcar> and after telnetting in I attached it
Dec 29 13:31:30 <bazz-> boomcar: change pass with this: To do this for a slug using an Unslung disk plugged into USB port 1, run these commands:    1. passwd 2. cp /etc/passwd /share/hdd/conf/passwd 
Dec 29 13:31:31 <Boomcar> and this is what df gave me
Dec 29 13:31:52 <caplink811_log> as drif said
Dec 29 13:32:32 <Boomcar> thats all?
Dec 29 13:32:42 <Boomcar> can I check b4 rebooting
Dec 29 13:32:43 <Boomcar> ?
Dec 29 13:32:46 <caplink811_log> point 2. is the urgent one
Dec 29 13:33:02 <caplink811_log> yes, open a 2nd telnet session and login with the new pw
Dec 29 13:33:05 <Boomcar> I did it, but I didn't get a message after that
Dec 29 13:33:06 <drif> or otherwise you need to do it again
Dec 29 13:33:16 <Boomcar> stupid me!
Dec 29 13:33:47 <Boomcar> and now reboot with the hd attached?
Dec 29 13:33:50 <drif> now just memorize that password , reboot and be happy :P
Dec 29 13:33:58 <drif> keep the hdd always on from now on
Dec 29 13:34:05 <Boomcar> I am soooo happy right now
Dec 29 13:34:27 <caplink811_log> wait with being happy until slug reboots, and you can log in
Dec 29 13:34:29 <Boomcar> when I need to shut down...which first the slug or the hd?
Dec 29 13:34:41 <caplink811_log> 1st slug, 2nd disk
Dec 29 13:34:46 <Boomcar> ok
Dec 29 13:35:01 <Boomcar> rebooting
Dec 29 13:35:14 <drif> you guys have luxurious models with fancy power switch?
Dec 29 13:35:33 <caplink811_log> no, just never shutdown ;)
Dec 29 13:35:44 <drif> same here ;P
Dec 29 13:36:55 <bazz-> hehe
Dec 29 13:37:25 <drif> I just wonder for how long my maxtor (gulp) can hold on...
Dec 29 13:38:00 <drif> I was about to get that La Cie model but heard there were some heat probs
Dec 29 13:39:20 <drif> boomcar: how's it going?
Dec 29 13:39:52 <bazz-> how's irssi drif :p
Dec 29 13:41:15 <drif> still checking those libs
Dec 29 13:41:47 <bazz-> i included a .readme.txt
Dec 29 13:42:14 <drif> and that's the file I'm checking :P
Dec 29 13:42:21 <bazz-> :p
Dec 29 13:43:35 <Boomcar> still booting: but no flickering
Dec 29 13:43:49 <Boomcar> have to go...see you tomorrow
Dec 29 13:44:11 <drif> it could be chexking it
Dec 29 13:44:13 <drif> checking
Dec 29 13:44:25 <drif> my boots sometimes last 5-10mins
Dec 29 13:44:25 <Boomcar> yes but top led is off
Dec 29 13:44:40 <bazz-> huh 
Dec 29 13:44:45 <Boomcar> sorry ...have to go
Dec 29 13:44:49 <drif> laters boom
Dec 29 13:44:55 <bazz-> my boot takes like 1 min
Dec 29 13:45:08 <drif> bazz: mine also does sometimes - it varies a lot
Dec 29 13:45:14 <caplink811_log> every time he is in such a hurry, there is a solution for his problem
Dec 29 13:45:46 <caplink811_log> hi Lunar_Lamp 
Dec 29 13:46:25 <drif> bazz: like a charm...
Dec 29 13:46:36 <Lunar_Lamp> hey
Dec 29 13:46:37 <Lunar_Lamp> a
Dec 29 13:47:04 <Lunar_Lamp> i got most of my problems sorted now - though i still don't have the slug as a proper named server.  xp pc can navigate to //slug
Dec 29 13:47:20 <bazz-> nice :]
Dec 29 13:47:30 <Lunar_Lamp> haven't had a chance to boot up suse and check - but it still didn't seem to like named server, though could deal with ip for some reason
Dec 29 13:47:32 <bazz-> i just noticed that dcc bug
Dec 29 13:47:35 <caplink811_log> Lunar_Lamp,  but you can ping it by name from the xp pc?
Dec 29 13:48:11 <Lunar_Lamp> yes
Dec 29 13:48:29 <drif_slug> tadaa
Dec 29 13:48:30 <drif_slug> :P
Dec 29 13:48:44 <caplink811_log> a sorry, see that you "can" browse the slug by name
Dec 29 13:49:01 <Lunar_Lamp> ?
Dec 29 13:49:01 <bazz-> :]
Dec 29 13:49:20 <caplink811_log> had read can't
Dec 29 13:49:51 <Lunar_Lamp> hehe :-)
Dec 29 13:49:52 <drif_slug> bazz: thanks :)
Dec 29 13:49:57 <bazz-> np :p
Dec 29 13:50:07 <bazz-> are you ignoring ctcp's too?
Dec 29 13:50:16 <bazz-> cause didn't get the version reply ;)
Dec 29 13:50:17 <caplink811_log> Mika_,  :)
Dec 29 13:50:20 <Lunar_Lamp> me?
Dec 29 13:50:25 <bazz-> hi mika
Dec 29 13:50:29 <Mika_> hi all
Dec 29 13:51:09 <drif_slug> bazz: probably because I'm not registered?
Dec 29 13:51:14 <Lunar_Lamp> well - im using mirc on a windows box that i can't be bothered to set up for anything more than the media pc it is about to become - so i don't care if my version is screwed in irc bazz- ;-)
Dec 29 13:51:45 <drif_slug> bazz: were you using bitlbee?
Dec 29 13:52:47 <bazz-> could be
Dec 29 13:52:52 <bazz-> yep
Dec 29 13:53:11 <bazz-> Lunar_Lamp: i was talking to drif actually ;)
Dec 29 13:53:26 <Lunar_Lamp> sorry!
Dec 29 13:53:42 <bazz-> nothing to be sorry about
Dec 29 13:54:07 <drif_slug> bazz: do you know if it's easy to configure to msn? I know..shivers...but my gf relatives hang out there...
Dec 29 13:55:08 * Mika_ away for a wile
Dec 29 13:55:12 <bazz-> sure
Dec 29 13:56:00 <bazz-> just check "help account " when you're logged in bitlbee
Dec 29 13:57:54 <drif_slug> hm, this is strange - now it's complaining about a library-file
Dec 29 13:58:03 <drif_slug> bitlbee
Dec 29 13:58:17 <bazz-> did you overwrite any libs when installing irssi? ;)
Dec 29 13:58:28 <drif_slug> nope just copied irssi to /opt/bin
Dec 29 13:58:35 <drif_slug> had all the needed libs :P sorry...
Dec 29 13:58:46 <bazz-> lol
Dec 29 13:59:05 <drif_slug> you could have always provided me with that readme first ;P
Dec 29 13:59:23 <bazz-> anyone should be able to install it now
Dec 29 13:59:36 <drif_slug> bazz: true
Dec 29 13:59:52 <bazz-> what's bitlbee complainig about
Dec 29 14:00:02 <drif_slug> libgcrypt.so.11
Dec 29 14:00:09 <drif_slug> and can't find that one
Dec 29 14:00:19 <bazz-> i'll give it to you
Dec 29 14:00:19 <drif_slug> I'm almost sure I had running one time...
Dec 29 14:00:23 <drif_slug> ok
Dec 29 14:00:33 <bazz-> try ldd /opt/sbin/bitlbee
Dec 29 14:00:40 <drif_slug> no ldd :-\
Dec 29 14:00:59 <bazz-> libgcrypt is part of openssl i think
Dec 29 14:01:21 <drif_slug> I have it installed though
Dec 29 14:01:38 <drif_slug> Package openssl (0.9.7d-4) is installed on root and has the following files:
Dec 29 14:01:46 <bazz-> and gnutls ?
Dec 29 14:02:17 <bazz-> i did a manual recompile of all those, cause had several problems without it
Dec 29 14:02:34 <drif_slug> gnutls - 1.2.4-1 - Describe gnutls here.  :P nice
Dec 29 14:02:45 <drif_slug> very informative
Dec 29 14:03:29 <drif_slug> there's also libgcrypt - 1.2.1-1 - GNU cryptography libray, needed by gnutls
Dec 29 14:03:32 <drif_slug> should I get that one
Dec 29 14:03:51 <bazz-> try it first
Dec 29 14:04:00 <bazz-> if it doesn't work, i'll give you mine
Dec 29 14:04:45 <drif_slug> that ldd would be nice
Dec 29 14:05:08 <bazz-> install the unslung-devel package
Dec 29 14:05:17 <drif_slug> what does that gnutls contain?
Dec 29 14:05:25 <bazz-> http://bazz.nl.eu.org/slug/libgcrypt.so.11.gz
Dec 29 14:05:33 <bazz-> dunno, but i thought bitlbee used that too
Dec 29 14:05:48 <bazz-> tls is also some crypt thing
Dec 29 14:06:10 <drif_slug> libtasn1.so.2
Dec 29 14:06:32 <bazz-> ipkg install libtasn1
Dec 29 14:07:38 <drif_slug> do you have your own S-file for bitlbee?
Dec 29 14:07:58 <bazz-> S-file?
Dec 29 14:08:15 <drif_slug> startup file on /opt/etc/init.d
Dec 29 14:08:28 <bazz-> i manually recompiled it cause it wouldn't connect googletalk
Dec 29 14:08:39 <bazz-> no it's running through xinetd
Dec 29 14:08:46 <drif_slug> what's the line
Dec 29 14:08:50 <drif_slug> (s)
Dec 29 14:10:22 <bazz-> got my query?
Dec 29 14:10:25 <drif_slug> yup
Dec 29 14:10:28 <bazz-> k
Dec 29 14:10:32 <drif_slug> naturally couldn't reply :P
Dec 29 14:10:40 <bazz-> thought so ;)
Dec 29 14:10:58 <drif_slug> bazz: do you have any ftp client running?
Dec 29 14:11:22 <bazz-> client or server?
Dec 29 14:11:26 <drif_slug> on slug
Dec 29 14:11:31 <drif_slug> ah, sorry :; server
Dec 29 14:11:34 <bazz-> nope
Dec 29 14:11:40 <bazz-> using smb
Dec 29 14:11:56 <bazz-> or sftp
Dec 29 14:12:13 <bazz-> brb
Dec 29 14:12:23 <drif_slug> ok
Dec 29 15:15:37 <Mika_> so i am done :D
Dec 29 15:25:51 <Mika_> what is this :
Dec 29 15:25:54 <Mika_> did you overwrite any libs when installing irssi? ;)
Dec 29 15:25:54 <Mika_> drif_slug nope just copied irssi to /opt/bin
Dec 29 15:25:54 <Mika_> drif_slug had all the needed libs :P sorry..
Dec 29 15:26:27 <drif_slug> exactly what it says :P
Dec 29 15:26:36 <Mika_> so irssi works ??
Dec 29 15:26:39 <drif_slug> yup
Dec 29 15:26:51 <drif_slug> using it as we speak
Dec 29 15:26:52 <Mika_> nice what package did u downl
Dec 29 15:27:11 * Mika_ is happy this is good news
Dec 29 15:28:44 <drif_slug> got it from bazz- - I suggest you ask him there were so many unnecessary lib-files in the link he pasted me
Dec 29 15:28:54 <caplink811_log> http://bazz.nl.eu.org/slug/irssi.tar.gz
Dec 29 15:29:07 <Mika_> hey caplink811_log :D
Dec 29 15:29:20 <Mika_> thx drif_slug and caplink811_log 
Dec 29 15:29:41 <caplink811_log> Mika_,  how is live going? got nice presents at xmas?
Dec 29 15:29:45 <drif_slug> mika: just drif ;P slug is just for the platform
Dec 29 15:30:17 <Mika_> ok drif 
Dec 29 15:30:51 <Mika_> caplink811_log, nope we had st nicolas at 5 december when we give presents
Dec 29 15:31:19 <Mika_> i got a magazine (linux) to read and some candy
Dec 29 15:31:43 <caplink811_log> ah. ok. every day learning something, that day wasn't for nothing
Dec 29 15:32:13 <Mika_> sorry caplink811_log ?
Dec 29 15:32:39 <caplink811_log> didn't know that before, so i learn something new to me
Dec 29 15:34:32 <Mika_> ok :) how was the weather yesterday and today u was talk about maybe 20 cm snow ?
Dec 29 15:35:34 <caplink811_log> 15cm until now, began in the early morning, and stoped at late afternoon, but it is ok, i like snow, everything is so quite
Dec 29 15:36:01 <Mika_> ok and the ways are good to drive ?
Dec 29 15:37:42 <caplink811_log> yeah, mainstreets, of course, not the little roads, in germany, or at least at berlin, the town isn't allowed ti use salt against the slickness
Dec 29 15:38:47 <Mika_> why not use salt
Dec 29 15:39:30 <Mika_> here they use salt alot at almost every street
Dec 29 15:39:52 <Guest6271> hi @all
Dec 29 15:40:13 <Guest6271> may I ask some NSLU-Linux-Newbie-Questions here?
Dec 29 15:40:22 <caplink811_log> isn't good to the tree, and the nature at all (not realy my opinion)
Dec 29 15:40:35 <caplink811_log> Guest6271,  sure
Dec 29 15:41:20 <Guest6271> ok, I unslinged successfully me NSLU, everything is working fine... I'm able to telnet it and install packages with ipkg... so far so good
Dec 29 15:41:57 <Mika_> yes maybe..but safety before that i think
Dec 29 15:42:17 <Guest6271> I installed busybox v1.xx too... but when I login in telnet I'm getting the message that busybox 0.64 (or something) is loaded
Dec 29 15:42:23 <caplink811_log> that is my mind
Dec 29 15:42:36 <Guest6271> also when I'm typing "help" I'm getting only a few commands
Dec 29 15:42:41 <caplink811_log> Guest6271,  what is correct
Dec 29 15:43:16 <Guest6271> but I'm able to use commands e.g. "more" (which weren't in the old version of busybox)
Dec 29 15:43:45 <Guest6271> so I'm running the new version of busybox? why do I get the old version number on startup?
Dec 29 15:43:47 <caplink811_log> in the passwd file (which is read at every login) there is a field which describe your login shell, and basically, this is /bin/sh (aka busybox 0.6bla)
Dec 29 15:44:22 <Guest6271> ah, I see... where is the passwd file? can I change the path to opt/bin/busybox ?
Dec 29 15:44:23 <caplink811_log> what is the output of the -> echo $PATH command?
Dec 29 15:45:15 <Guest6271> echo $PATH says: "/opt/sbin:/opt/bin:/opt/lib/:/lib/:/sbin:/bin:/usr/sbin:/usr/bin"
Dec 29 15:46:13 <caplink811_log> ah, ok, busybox-1.0 reside in /opt/bin, so this path is searched before /bin, that is why you can use the new commands. Guest6271,  yes, you can do that, but that isn't safe for user root
Dec 29 15:46:55 <Guest6271> so I have to create a new telnet-user and use that to telnet the slug?
Dec 29 15:47:09 <caplink811_log> passwd is /share/[hdd|flash]/conf/passwd (assuming you have a data storage attached)
Dec 29 15:47:24 <Guest6271> thanks
Dec 29 15:47:43 <Guest6271> currently I'm telneting the slug with the root user... shouldn't I?
Dec 29 15:47:48 <caplink811_log> or you enter something like that .... to /etc/profile (einen moment pls)
Dec 29 15:48:22 <caplink811_log> if [ -e /opt/bin/bash ]
Dec 29 15:48:22 <caplink811_log>         then
Dec 29 15:48:22 <caplink811_log>         /opt/bin/bash
Dec 29 15:48:22 <caplink811_log> fi
Dec 29 15:48:46 <caplink811_log> replace bash with sh
Dec 29 15:49:18 <Guest6271> replace the first bash with sh?
Dec 29 15:49:41 <caplink811_log> in the lines above... at login 1st testing that /opt/bin/sh exist, and then execute it
Dec 29 15:50:27 <Guest6271> ah, ok
Dec 29 15:50:47 <Guest6271> so this will prevent loading the old busybox?
Dec 29 15:50:57 <Guest6271> damn, I hate to be a newbie ;-)
Dec 29 15:51:03 <caplink811_log> so, nothing went wrong, if the shell don't exist (e.g. when you boot without hd)
Dec 29 15:51:28 <caplink811_log> or when you delete a wrong (e.g. /opt/bin/sh) file
Dec 29 15:52:20 <Guest6271> I don't have a file called profile in the etc-directory... just a .profile in root!
Dec 29 15:52:44 <caplink811_log> for user root that behaviour is the best, for other users, you can change /share/hdd/conf/passwd (shell field)..
Dec 29 15:53:04 <caplink811_log> ah, ok, then add those lines above to /root/.profile
Dec 29 15:53:32 <Guest6271> ok, thanks... will that prevent the old version from loading?
Dec 29 15:54:21 <caplink811_log> for user root that is a disadvantage, 1st load busybox-0.6bla, and then load bb-1.0 (but imho, safty 1st)
Dec 29 15:54:26 <caplink811_log> safety
Dec 29 15:55:14 <Guest6271> so I still have the old busybox if anything goes wrong with the new version?
Dec 29 15:55:37 <caplink811_log> yep, if we're talking about user root
Dec 29 15:55:55 <Guest6271> yes... ok, I understand... phu, still have a lot to learn :-/
Dec 29 15:57:41 <Guest6271> anyway, thank's a lot, your help is really appreciated
Dec 29 15:57:49 <caplink811_log> no problem
Dec 29 15:59:25 <Mika_> drif, did u link all the libs ?
Dec 29 15:59:58 <Mika_> caplink811_log, how far are u with ur book almost done ? :P
Dec 29 16:01:48 <caplink811_log> i'm at the 3rd one, 2 done, 1 left ;)
Dec 29 16:02:41 <caplink811_log> Mika_,  the libs in /lib should almost there, just unpack the libs that aren't in /opt/lib
Dec 29 16:03:08 <Guest6271> bye @all
Dec 29 16:03:15 <Mika_> bye Guest6271 
Dec 29 16:03:33 <Mika_> so not link the files just copy to there
Dec 29 16:03:43 <Mika_> ok
Dec 29 16:03:55 <caplink811_log> if they aren't there, yes
Dec 29 16:05:05 <Mika_> ok :) i was think to link because it is easyer to remove when it is not work well or give other problems
Dec 29 16:05:17 <caplink811_log> that should work too
Dec 29 16:08:51 <Mika_> it works yessss
Dec 29 16:09:02 <Mika_> bazz-, you are good !!
Dec 29 16:10:54 <Mika_> so now i fix irssi to allow 127.0.0.1 to login ..
Dec 29 16:12:21 <Mika_> caplink811_log, do u have to work tomorow ?
Dec 29 16:13:50 <caplink811_log> 3 days holiday, i have :)
Dec 29 16:14:13 <caplink811_log> nope, 2 days
Dec 29 16:15:13 <Mika_> i have not to work this year after today :D
Dec 29 16:16:14 <caplink811_log> until monday (aka next year)?
Dec 29 16:16:27 <bazz-> did i hear my name somewhere, :p
Dec 29 16:16:35 <Mika_> yes monday i have to work again... and i think it wil be a crazie day
Dec 29 16:16:48 <Mika_> bazz-, thx for your irssi build
Dec 29 16:16:56 <Mika_> put it on wiki bazz- 
Dec 29 16:16:58 <bazz-> np :)
Dec 29 16:17:05 <bazz-> i should create a package
Dec 29 16:17:22 <bazz-> so "ipkg install irssi" would work
Dec 29 16:17:41 <caplink811_log> bazz-,  but you know the rules?
Dec 29 16:17:54 <bazz-> nope i don't :)
Dec 29 16:17:57 <Mika_> i think you make a lot of people happy i go test it for you
Dec 29 16:18:11 <drif> bazz-: is it possible to keep that bitlbee online? it goes offline when I close irssi
Dec 29 16:18:11 <bazz-> Mika_: i hope you read .readme.txt
Dec 29 16:18:23 <bazz-> drif, start irssi with screen
Dec 29 16:18:25 <Mika_> yes
Dec 29 16:18:29 <caplink811_log> for an offical package that will go to the repository it must build with the build environment
Dec 29 16:18:39 <bazz-> or you can use something like miau / psybnc or whatever to keep it connected
Dec 29 16:18:44 <bazz-> i use screen + irssi
Dec 29 16:18:46 <Mika_> screen is cool for all functions
Dec 29 16:19:16 <drif> so if I'll keep that irssi online I can use other clients from other machines as well?
Dec 29 16:19:37 <drif> or it's strickly for that irssi session?
Dec 29 16:19:54 <bazz-> you should just connect to port 6667 of your slug
Dec 29 16:20:00 <bazz-> that's the only thing you need
Dec 29 16:20:11 <drif> actually I thought bitlbee would also be psybnc equivalent..
Dec 29 16:20:31 <bazz-> xinetd is listening on 6667 for bitlbee connections
Dec 29 16:21:00 <bazz-> btw my irssi build is a cvs build
Dec 29 16:21:11 <bazz-> i think it's the latest
Dec 29 16:21:21 <bazz-> but.. it crashes when dcc'ing
Dec 29 16:22:01 <drif> bazz-: ok, so scratch that irssi-question
Dec 29 16:22:11 <Mika_> caplink811_log, you are a fast reader when u read already 2 books in 1 week
Dec 29 16:22:32 <bazz-> or he has problems sleeping :p
Dec 29 16:22:53 <caplink811_log> it was a light reading, crime stories, just entertainment
Dec 29 16:23:33 <caplink811_log> and i had some spare time
Dec 29 16:24:01 <bazz-> caplink811_log: which build environment do you mean exactly? the one that's built with unslung-devel.
Dec 29 16:24:04 <bazz-> ?
Dec 29 16:24:21 <caplink811_log> bazz-,  yes, and you should use template.mk
Dec 29 16:24:35 <bazz-> template.mk doesn't work ;)
Dec 29 16:24:51 <caplink811_log> that may be a problem
Dec 29 16:25:00 <bazz-> otherwise it'd probably already be a downloadable package
Dec 29 16:25:16 <bazz-> anyways, i compiled it, made a tarball, and anyone who wants to use it, can use it :p
Dec 29 16:25:40 <caplink811_log> but that should propagate (seems that is impossible on a "offical" way)
Dec 29 16:25:50 <Mika_> bazz-, but u can put it on wiki with a discription or not ?
Dec 29 16:26:10 <bazz-> Mika_: yeah, but it's not the way it should be done
Dec 29 16:26:21 <bazz-> i'll try create an ipkg
Dec 29 16:26:28 <bazz-> after the exams
Dec 29 16:26:33 <caplink811_log> sure, afair, there is a hint of a version of syslogd (build by myself) in the wiki too
Dec 29 16:26:52 <Mika_> ok that is true bazz- but i am sure more people like it
Dec 29 16:27:59 <bazz-> yep but i have other priorities atm
Dec 29 16:29:28 <Mika_> yes but over 3 weeks you finish your exams with good result
Dec 29 16:29:43 <bazz-> i start in 3 weeks :)
Dec 29 16:30:00 <Mika_> oww ok .. and for how long ?
Dec 29 16:30:31 <bazz-> got my last one in february
Dec 29 16:30:52 <bazz-> think 3 february
Dec 29 16:31:50 <bazz-> anyways :)
Dec 29 16:32:01 <Mika_> ok so january is a hard month
Dec 29 16:32:01 <bazz-> i should sleep..
Dec 29 16:32:11 <Mika_> ok have a nice sleep bazz- 
Dec 29 16:32:42 <bazz-> thanks Mika_ 
Dec 29 16:32:44 <bazz-> night all
Dec 29 16:34:03 <caplink811_log> Gnight bazz- 
Dec 29 16:36:04 <Mika_> it is cold here i should go to bed soon
Dec 29 16:38:24 <Mika_> chmod -x /opt/etc/init.d/S52miau wil that skip miau to starts after a reboot ?
Dec 29 16:39:35 <caplink811_log> Mika_,  maybe, but for sure, rename it -> mv S52miau xS52miau
Dec 29 16:40:06 <caplink811_log> only files that starts with S are execute at startup
Dec 29 16:40:30 <caplink811_log> and only files which starts with K are execute at shutdown
Dec 29 16:40:45 <Mika_> ok that is good ..because i wil try irssi for a few weeks to see if he is working fine..
Dec 29 16:44:27 <Mika_> it works :D caplink811_log 
Dec 29 16:44:51 <caplink811_log> i hope so ;)
Dec 29 16:45:06 <Mika_> ok .. it works for now ;-)
Dec 29 16:45:29 <Mika_> but now i can easy stay online at 2 ircservers
Dec 29 16:45:50 <Mika_> and login from every computer at the internet
Dec 29 16:47:03 <Mika_> but miau is nice for a friend what is use mirc at his xp machine 
Dec 29 16:47:42 <Mika_> he can easy reboot with not lost a chat :D
Dec 29 16:48:04 <caplink811_log> nice thing :)
Dec 29 16:48:52 <caplink811_log> well, now i'm tired, time to heading to bed now, Mika_ have a nice evening, or, ok, beautiful night
Dec 29 16:49:38 <Mika_> yes i go sleep also ...tomorow at 8 the kids are awake 
Dec 29 16:49:47 <Mika_> night caplink811_log 
Dec 29 16:50:22 <caplink811_log> brr, at a free day, wake uo at 8 o'clock, brrr
Dec 29 16:50:45 <caplink811_log> gnight
Dec 29 16:51:05 <Mika_> yes..i see you have no kids ..lol but i can stay in bed i hope my wife wil go out she dont like to stay long in bed
Dec 29 16:51:17 <Mika_> ok sometimes she likes ;-)
Dec 29 16:52:04 <Mika_> gnight
Dec 29 16:53:22 <caplink811_log> as my wife (gf) too..
Dec 29 16:53:47 <Mika_> keep that like that
Dec 29 16:54:14 <Mika_> mine dont drink alcohol to so that is nice with party`s she can drive always :P
Dec 29 16:56:40 <caplink811_log> would say that too, but we've to take a taxi at those opportunities 
Dec 29 16:58:57 <Mika_> Hehe.. that is the problem when i go out with friends... 
Dec 29 16:59:46 <Mika_> and she wil bring me to the bar .. but not pick me up and bring me back home
Dec 30 00:47:44 <willjasen> can anyone help me out a bit?
**** ENDING LOGGING AT Fri Dec 30 03:00:01 2005