**** BEGIN LOGGING AT Sat Jan 21 02:59:56 2006 Jan 21 05:20:44 hi Jan 21 05:20:47 anyone here? Jan 21 05:22:35 :( Jan 21 05:22:43 got a very stupid problem... Jan 21 05:22:51 just cnat figure something out.. Jan 21 05:22:54 cant Jan 21 05:23:06 Status: Connected with slug. Waiting for welcome message... Jan 21 05:23:12 Response: 500 OOPS: vsftpd: cannot open config file:/optetc/vsftpd.conf Jan 21 05:23:26 problem is here: file:/optetc/vsftpd.conf Jan 21 05:23:28 should be Jan 21 05:23:34 file:/opt/etc/vsftpd.conf Jan 21 05:23:49 (opt/etc and not optetc Jan 21 05:23:53 where is the config for this? Jan 21 05:23:55 thx Jan 21 05:24:27 compiled it yourself? Jan 21 05:25:58 just link /opt/etc/vsftpd.conf to /optetc/vsftpd.conf :p Jan 21 05:26:05 g2g Jan 21 05:40:30 but opt etc doesnt exist Jan 21 05:40:37 optetc* Jan 21 05:51:13 hey bazz Jan 21 05:51:18 i was saying Jan 21 05:51:22 but optetc doesnt exist Jan 21 06:06:21 hi, can someone help me with sudo? Jan 21 06:06:48 I installed sudo but can't change sudoers Jan 21 06:12:10 sudo: can't stat /opt/etc/sudoers: Input/output error Jan 21 06:12:17 when I try to "sudo sh" Jan 21 06:20:07 hm Jan 21 06:20:25 my flash isn't mounting on every boot :-\ Jan 21 06:36:02 drif: maybe your usbstick to slow .. can you not make a sleep before he go mount so it gives it a litle more time to regonise the stick ? Jan 21 06:37:27 and should I be doing that? Jan 21 06:38:04 i dont now where is there not a init file that make the mount ? Jan 21 06:41:42 I've been using that stick for some time without any probs Jan 21 07:04:48 cwebb: on a regular UNIX, /etc/sudoers is edited using the visudo command Jan 21 07:05:56 drif: strange or you r stick is not so good more Jan 21 07:06:31 can u put the data with dd to a other disk ? Jan 21 08:01:09 mika: it's onlt couple of week old stick Jan 21 09:07:43 hi all Jan 21 09:07:59 anyone knows the difference between opendebianslug & opendebian? Jan 21 09:08:13 ( http://libtorrent.rakshasa.no/ticket/143 ) Jan 21 09:52:34 who closed debian? ;) Jan 21 11:55:23 drif: that is strange yes .. i have no idea then Jan 21 12:09:22 how can create a Maildir in unslung? Jan 21 12:10:51 how can create a Maildir in unslung? Jan 21 13:24:51 hello. is anyone available to help me with what is possibly a really simple question? Jan 21 13:25:10 not sure how live this irc chat is Jan 21 13:25:18 just ask your question Jan 21 13:26:32 cool. thx. recently got my nslu2 and was able to unsling a flash drive np. now i want to get it running on a 'real' external hd, so i hooked up my WD160, went through the smae steps(format, unsling, reboot) and it all looks good, but when i boot i dont get a beep and the green ready light is solid, but no web connectivity Jan 21 13:27:05 i can boot into the nslu wo/any dirve or if i do it with the flash drive (in port1), but nada with teh external drive Jan 21 13:27:32 one more note, if i connect the wd after no disk boot, i can see it and get into it, but of course the rootfs is not booted from that device Jan 21 13:29:30 i'm not sure if i can help you there, but are you using unslung? and what version? Jan 21 13:29:46 unslung 5.5 beta Jan 21 13:31:36 Can anyone tell me how to register on the wiki? Jan 21 13:32:01 Or can't you? Jan 21 13:32:54 peeklay: i remeber having a somewhat similar problem.. i'm trying to remeber/lookup how i got around it.. i knew how to fix it here :) Jan 21 13:33:43 Reedy, why you would do this? Jan 21 13:33:52 cool. thx. its interesting because the drive works fine when attached after boot and i can get my flash drive to work fine as boot device....just cant get this big one to boot... Jan 21 13:34:00 well, to be able to edit it and stuff Jan 21 13:35:00 i am perusing unslung.org and going through several docs to see if a similar issue exists in one of the howtos etc Jan 21 13:35:29 Reedy, you can edit nearly every page Jan 21 13:35:40 i know, just some people have usernames Jan 21 13:35:41 without registering Jan 21 13:35:50 just thought it would be better Jan 21 13:36:09 peeklay: as far as i can remeber, someone here told me to remove some files and probably to re-unsling. can you remove the files created by unsling and then re-unsling again? Jan 21 13:36:10 when you edit a page, there is a field where you can fill in your name as author Jan 21 13:36:31 ah, right Jan 21 13:36:43 thats fair enough, hence no registration Jan 21 13:36:44 i can definitely do that. do i need to remove something like .unsling from teh flash or something? Jan 21 13:37:50 if it is created when you unsling Jan 21 13:38:49 you don't need to do anything to your usb flash memory.. just don't use it for now Jan 21 13:38:50 Is it possible to mount NTFS disk with Unslung? Jan 21 13:39:11 ok, ill levae the flash alone Jan 21 13:39:30 06(tuv06): lemme try and ill get back to you. thx for your help Jan 21 13:39:42 peeklay: np Jan 21 13:39:46 hope it works Jan 21 13:41:48 peeklay: is it ok now ? Jan 21 13:42:17 PedrosPad, basically, yes ipkg install ufsd is one step, another is read at the ml http://groups.yahoo.com/group/nslu2-linux/message/9718 Jan 21 13:42:28 mika. not yet. i am trying to find the .unslung and /sd files on teh internal flash memory...not sure how to get there. Jan 21 13:42:42 as an fyi, i am trying to follow this step http://www.nslu2-linux.org/wiki/FAQ/DiskNotRecognized Jan 21 13:42:53 the part under 'this worked for me' Jan 21 13:43:02 i had the same let me find (i format the harddisk and unslyug again and it did not work Jan 21 13:45:13 Thx Jan 21 13:46:27 peeklay: http://pastebin.com/516535 is maybe a idea for you Jan 21 13:47:28 this is for when you change your harddisk for a new one Jan 21 13:48:37 06(mika_06): awesome. trying now. i just didnt know the command to remove teh file....mcse = sh*t in linux...haha. rebooting and reunslinging now....will update you and tuv Jan 21 13:51:09 ok i had the same before and caplink811_log did give me this option Jan 21 13:51:32 but i am out now for 30 minutes but when i am back i wil read the log and see if it works again Jan 21 13:52:45 good luck peeklay Jan 21 13:52:46 mika and tuv....thanks so much. that took care of it Jan 21 13:53:16 just need to get rid of that root file and then the re unsling did the job. thanks again guys.....now onto better more fun apps with this thing Jan 21 13:55:03 anyone used dovecot imap server with ssl on unslung? i'm not sure how to configure ssl Jan 21 14:07:43 morning ;o) Jan 21 14:09:23 Boomcar, :) Jan 21 14:09:58 How are u? Jan 21 14:10:28 fine, hope, you too Jan 21 14:10:39 sure ;) Jan 21 14:10:59 is your slug still running smoothly? Jan 21 14:11:35 they run both nice, as expected :) Jan 21 14:11:44 hehe Jan 21 14:12:00 weren't you using one as a streaming server? Jan 21 14:17:59 yes, linus streams mp3's via twonkyvision Jan 21 14:19:25 no video? Jan 21 14:20:10 no, not my passion Jan 21 14:20:26 ic and what music is your passion? Jan 21 14:22:02 hi all Jan 21 14:22:10 anyone read this? http://libtorrent.rakshasa.no/ticket/143 Jan 21 14:22:21 primary, 50's and early 60's, southern rock, r&b, bruce springsteen Jan 21 14:23:08 ic nice...I am a great fan of The Cult.............heard of them? Jan 21 14:23:55 Boomcar, nope Jan 21 14:24:08 Alternative Rock... Jan 21 14:24:19 bazz-, seems there is an endianess problem with rtorrent Jan 21 14:24:47 Boomcar, something like the moody blues? Jan 21 14:25:04 nope ...like The Cure but heavier... Jan 21 14:25:09 caplink811_log: this seems to occur only with unslung firmware, i heard openslug people have no complaints Jan 21 14:25:46 is there a possible solution, except for switching to openslug? Jan 21 14:26:13 i'm going to try the ipkg version again Jan 21 14:26:18 bazz-, but one of the follow up's are on problems with openslug, and no probs on debianslug (be versus le) Jan 21 14:27:29 hrm Jan 21 14:27:39 i thought i read on yahoogroups that it'd work Jan 21 14:34:46 can't find it, stupid search on yahoogroups.. Jan 21 14:36:20 so is there a solution to this endianness thing? Jan 21 14:36:34 (i'm not really a programmer) Jan 21 14:38:36 04[22:36] Boomcar: 01helaas Jan 21 14:38:36 04[22:36] Boomcar: 01Ik heb de moed maar even opgegeven Jan 21 14:38:36 04[22:36] Boomcar: 01ik denk dat het idd aan de combinatie met Apache ligt Jan 21 14:38:36 04[22:37] Boomcar: 01Ik moet zeggen dat ik het wel jammer vind, maar ik wil me voorlopig even richten op het installeren van een mailserver Jan 21 14:38:36 04[22:37] Boomcar: 01Ik heb xmail geinstalleerd, maar nog niet aan de praat gekregen Jan 21 14:38:37 10[22:38] mika_: 01ik denk dat je nog niet identify gedaan heb bij freenode ik zie namelijk niet wat je tikt Jan 21 14:38:54 dan maar even zo....sorry for the language Jan 21 14:39:32 watskeburt? =) Jan 21 14:39:42 hehe Jan 21 14:39:57 Nevermind Jan 21 14:40:59 heheh Jan 21 14:41:05 ok then Jan 21 14:41:44 peeklay: al back ? Jan 21 14:42:17 hi mika Jan 21 14:42:57 hey bazz- en caplink811_log olso hello Jan 21 14:42:59 Is it possible to connect an xbox to the slug to watch movies? Jan 21 14:43:00 also* Jan 21 14:43:07 mika_, :) Jan 21 14:43:31 should be possible, if xbox allows to Jan 21 14:43:40 ic Jan 21 14:44:16 caplink811_log: does the ipkg version work for you (rtorrent) Jan 21 14:44:37 dunno, don't use any torrent Jan 21 14:45:46 ~weather eddi Jan 21 14:45:55 Berlin-Tempelhof, Germany; (EDDI) 52-28N 013-24E 49M; last updated: 2006.01.21 2120 UTC; Dew Point: 19 F (-7 C); Pressure (altimeter): 30.30 in. Hg (1026 hPa); Relative Humidity: 92%; Sky conditions: mostly cloudy; Temperature: 21 F (-6 C); Visibility: greater than 7 mile(s); Wind: from the NNE (030 degrees) at 16 MPH (14 KT); Windchill: 6 F (-14 C) Jan 21 14:46:04 brr Jan 21 14:48:39 yes and that comes to holland next week .. Jan 21 14:49:22 the forecast tell something like -12 degree this night, and to -20 the next nights Jan 21 14:51:17 hrmm Jan 21 14:51:25 that's cold :p Jan 21 14:52:57 yeah, the temperature gone down about 6 degrees in the last 2 hours Jan 21 14:53:13 wow where do you live? Jan 21 14:53:17 north pole? Jan 21 14:53:26 see above Jan 21 14:53:29 4° here Jan 21 14:53:33 berlin Jan 21 14:53:37 yep Jan 21 14:53:50 not so far away from belgium Jan 21 14:54:03 still, about 1000kms from where i live i think Jan 21 14:54:51 And too far from Rotterdam ;o) Jan 21 14:55:14 we'll see Jan 21 14:59:18 i'm trying to recompile using the .mk file from the cvs, i changed version numbers Jan 21 14:59:52 to download the latest unstable rtorrent release Jan 21 15:00:14 I'll let you know if it works Jan 21 15:03:02 see you tomorrow... Jan 21 15:16:36 mika it came up fine. thanks for ou help Jan 21 15:17:49 Good to hear that peeklay Jan 21 15:18:20 y, it was that /.sd1root file Jan 21 15:23:55 anyone who knows where to find the 'nice' commando? Jan 21 15:24:17 want to add the 'renice' command, thought it'd be in the same package Jan 21 15:30:41 nice is in coreutils, but renice isn't Jan 21 15:32:21 hrm Jan 21 15:32:28 because irssi is really slow while compiling :) Jan 21 15:36:06 damn can't find it on google Jan 21 15:36:55 found "verynice" :) http://tam.cornell.edu/~sdh4/verynice/ Jan 21 15:41:02 pigpen:~# apt-cache search renice Jan 21 15:41:03 and - Auto Nice Daemon Jan 21 15:41:03 gps - Graphical Process Statistics using GTK+ Jan 21 15:41:03 schedutils - Linux scheduler utilities Jan 21 15:41:03 bsdutils - Basic utilities from 4.4BSD-Lite Jan 21 15:41:29 maybe, that bsdutils is that thing you search Jan 21 15:41:39 i think it's schedutils Jan 21 15:41:52 (thanks) Jan 21 15:42:01 nope, have you read the package page at www.gnu.org? Jan 21 15:42:34 http://directory.fsf.org/schedutils.html Jan 21 15:42:59 ...Together with nice and renice (not included), ... Jan 21 15:43:16 damn :) Jan 21 15:44:30 i'll try verynice for now Jan 21 15:44:35 seems like a daemon Jan 21 15:44:55 on my ubuntu, $ dpkg -S /usr/bin/renice Jan 21 15:44:56 bsdutils: /usr/bin/renice Jan 21 15:55:05 seems to work :) Jan 21 15:55:17 it compiles really quick Jan 21 15:55:31 you should try it (if you need it of course) Jan 21 18:17:13 why does "crontab -e" return " '/opt/var/cron' is not a directory, bailing out. " for non-root users? Jan 21 18:29:05 hello, quick question on building Openslug from the tarball if anyone knows the answer: Do I need to source the setenv file in the Openslug 2.7 tarball before building that or is the setenv only for adding packages? Jan 21 18:42:07 ahh, nevermind, looking at the setenv file, I am reading that the makefile uses setenv so sounds like I should be fine w/out sourcing it. I had myself worried when I started reading up on adding packages and it says to source setenv. ;-) Jan 22 02:45:16 Hi. I seem to have a problem with my slug. I can't get to the "standard" web page via my browser. I think I have deleted some startup scripts (*idiot*). Does anybody now how to start it up again? Jan 22 02:50:30 Anyone..? **** ENDING LOGGING AT Sun Jan 22 02:59:57 2006