**** BEGIN LOGGING AT Fri Jan 27 03:00:04 2006
Jan 27 03:05:14 <MrPiMP^aw> I cant find my NSLU2 at my local network anymore
Jan 27 03:05:30 <MrPiMP^aw> Is there any easy way to fint it again :p ?
Jan 27 03:44:23 <EvilDevil> MrPiMP Windows|Linux: nmap www.insecure.org/nmap  nmap -sP 192.168.1.0/24 replace the network adress with you own values
Jan 27 04:39:13 <MrPiMP> drif there :p ?
Jan 27 05:07:30 <emm_is> does anyone know what the point of the network interface 'eth1' is -- it doesn't seem to be involved in any traffic and I was wondering if any memory could be released if one disabled it?
Jan 27 09:12:14 <seanb724> anyone run rsync from windows to their slug?  i can't get the perms right on the slug.  windows via cygwin shows drwx-------,  trying rsync w/o -p and trying to use umask 0022 for the rsync process on the slug does not help.
Jan 27 10:57:11 <kami22> hi can anyone tell me a method to watch mpeg, xvid files directly from the slug on my PC without transfering the complete data to my PC and than watch it?
Jan 27 10:58:16 <wallycharlo> hi ... im unslung5.5 ... i had previously setup a file to enable telnet ... now i just installed xinetd package ... i exited the telnet session but now i can no longer login :( ... any advice ? 
Jan 27 10:59:04 <wallycharlo> @kami : you can do this with samba
Jan 27 10:59:06 <seanb724> <your_slugs_ip>/Management/telnet.cgi
Jan 27 10:59:08 <seanb724> ?
Jan 27 10:59:31 <wallycharlo> yes, i enable telnet this way ... but then it just hangs when i try to telnet
Jan 27 11:00:55 <wallycharlo> i think i should have set some options before logging out ..... 
Jan 27 11:01:39 <kami22> wallycharlo: mhh is there anywhere a howto what is with a streaming server? but it should be really low memory using?
Jan 27 11:02:14 <wallycharlo> samba will work. ive used it. is samba running on your nslu2 ? 
Jan 27 11:03:07 <wallycharlo> youre files are on a dosk connected to the slug ? 
Jan 27 11:03:50 <kami22> yes my files are on a disk connected to the slug and i must install samba
Jan 27 11:05:07 <wallycharlo> do ps in the slug 
Jan 27 11:05:41 <wallycharlo> can u see the files on your slug though your pc ? 
Jan 27 11:05:48 <wallycharlo> via my computer ? 
Jan 27 11:06:10 <kami22> you mean when i install samba?
Jan 27 11:06:14 <wallycharlo> no 
Jan 27 11:06:37 <wallycharlo> is samba runnign on your slug ? 
Jan 27 11:07:44 <kami22> no
Jan 27 11:07:56 <wallycharlo> u sure ? ... so a ps and see 
Jan 27 11:08:16 <kami22> i am sure :) 
Jan 27 11:08:27 <wallycharlo> then install it 
Jan 27 11:08:32 <kami22> i installed a openslug and i selceted the package
Jan 27 11:08:40 <kami22> okay i will install wait a second
Jan 27 11:09:05 <wallycharlo> http://ipkgfind.nslu2-linux.org/result.php?query=samba&searchtype=package&section=
Jan 27 11:18:28 <wallycharlo> can anyone help with my xinetd/telnet problem ? 
Jan 27 11:18:40 <wallycharlo> i think i have messed it up and will have to reflash :(
Jan 27 11:40:39 <caplink811> wallycharlo,  reboot without hd attached, then login via telnet, and then reattach the hd
Jan 27 11:42:59 <caplink811> you should modify /opt/etc/yinetd.conf, the lines which begin with only_from
Jan 27 11:43:54 <caplink811> and make sure, that there is a file telnetd in /opt/etc/xinetd.d which contains something like this
Jan 27 11:44:35 <caplink811> http://pastebin.com/526045
Jan 27 11:49:57 <seanb724> does tcpdump only work inbound on the ixp0 ?
Jan 27 11:51:48 <seanb724> i have a bizarre problem where active ftp always works, but passive only works intermittently per command.
Jan 27 11:52:04 <seanb724> i have proftpd set up with a restriced set of ports for passive and those match the fw
Jan 27 12:31:24 <ciaran> hi there, can anyone tell me if Unslung can use an NTFS volume as the main drive??
Jan 27 12:31:44 <ciaran> Without reformatting to EXT3, I mean
Jan 27 12:42:22 <ciaran> everyone asleep? ;-)
Jan 27 12:45:03 <wallycharlo> @caplink
Jan 27 12:45:25 <wallycharlo> as soon as i reattch the hard disk /opt only contains doc
Jan 27 12:45:31 <wallycharlo> nothing else
Jan 27 12:45:36 <wallycharlo> no /opt/etc
Jan 27 12:47:33 <caplink811> sorry, correct path is /share/hdd/opt/etc
Jan 27 12:47:49 <caplink811> sorry, correct path is /share/hdd/data/opt/etc
Jan 27 12:48:04 <caplink811> assuming, the disk is at port1
Jan 27 12:49:08 <wallycharlo> ?
Jan 27 12:49:19 <wallycharlo> from /data
Jan 27 12:49:22 <wallycharlo> i have no files
Jan 27 12:49:29 <wallycharlo> ls returns nothing
Jan 27 12:50:13 <caplink811> wallycharlo,  you use unslung-5.5?
Jan 27 12:50:17 <wallycharlo> yes
Jan 27 12:50:33 <wallycharlo> i am now in /share/hdd/data
Jan 27 12:50:35 <caplink811> and you booted without hd attached, then login, reattach the disk?
Jan 27 12:50:37 <wallycharlo> no files 
Jan 27 12:50:39 <wallycharlo> yes
Jan 27 12:50:43 <wallycharlo> i will try ince nore
Jan 27 12:52:56 <caplink811> if you use te mount command, the output should show you a line similiar to this
Jan 27 12:52:59 <caplink811> /dev/sda1 on /share/hdd/data type ext3 (rw)
Jan 27 12:53:20 <caplink811> s/te/the/g
Jan 27 12:53:20 <capbot> caplink811 meant: /dev/sda1 on /share/hdd/data type ext3 (rw)
Jan 27 12:56:26 <wallycharlo> no it doesnt ... 
Jan 27 12:56:32 <wallycharlo> when i type mount 
Jan 27 12:56:35 <wallycharlo> it says ... 
Jan 27 12:57:39 <wallycharlo> not this at all 
Jan 27 12:57:59 <wallycharlo> mentions no disks
Jan 27 12:58:31 <caplink811> also nothing about /dev/sda2 ?
Jan 27 12:59:24 <wallycharlo> in /dev i have no sda
Jan 27 12:59:48 <caplink811> then you should mount the data partition manually -> mount /dev/sda1 /share/hdd/data
Jan 27 13:00:29 <wallycharlo> ok i have it now 
Jan 27 13:00:37 <wallycharlo> one mo....
Jan 27 13:01:33 <wallycharlo> the file init.d is empt
Jan 27 13:01:36 <wallycharlo> empty
Jan 27 13:02:19 <wallycharlo> should i paste in what u put on ? 
Jan 27 13:02:35 <caplink811> which file do you mean? /share/hdd/data/opt/etc/init.d is a directory
Jan 27 13:02:44 <wallycharlo> ah ok :)
Jan 27 13:03:28 <wallycharlo> ok .. so in this dir i create a file like you already suggested ? 
Jan 27 13:04:19 <wallycharlo> a file called telnetd
Jan 27 13:04:31 <wallycharlo> with the contents that you told me ? 
Jan 27 13:04:31 <caplink811> no, in /share/hdd/data/opt/etc should be a file xinetd.conf which you should modify, as i mentioned above
Jan 27 13:05:00 <caplink811> parameter only_from should adjusted to your network environment
Jan 27 13:05:55 <wallycharlo> ok 
Jan 27 13:06:02 <wallycharlo> that file had 192.168.1 .. 
Jan 27 13:06:05 <caplink811> and then make sure that there is a file in /share/hdd/data/opt/etc/xinetd.d with the name telnetd and the contents that i'd "pastebin"
Jan 27 13:06:11 <wallycharlo> i use 192.168.0 
Jan 27 13:06:14 <wallycharlo> i changed this
Jan 27 13:06:27 <wallycharlo> ok
Jan 27 13:08:40 <wallycharlo> done ... reboot now ? 
Jan 27 13:09:07 <caplink811> /share/hdd/data/opt/etc/xinetd.d/telnetd exist ?
Jan 27 13:09:31 <wallycharlo> yes
Jan 27 13:09:34 <wallycharlo> just made it 
Jan 27 13:09:44 <caplink811> then, yes, reboot with hd attached
Jan 27 13:09:57 <wallycharlo> k
Jan 27 13:10:34 <caplink811> maybe that it wont work
Jan 27 13:12:28 <wallycharlo> it works :))))
Jan 27 13:12:41 <wallycharlo> but ... i need to setup allow telnet again 
Jan 27 13:12:43 <caplink811> k, then you had installed inetutils in the past
Jan 27 13:12:51 <wallycharlo> without going to web interface
Jan 27 13:13:40 <caplink811> normally, no, xinetd replace the inetd from linksys completly, there is no need for /unslung/rc.xinetd, or enable telnet via webinterface
Jan 27 13:14:10 <wallycharlo> well, when i rebooted i could not telnet wihtout enabling from web interface
Jan 27 13:15:10 <caplink811> imho, you should adjust the path to the telnetd (parameter server) in /opt/etc/xinetd.d/telnetd to /usr/sbin/telnetd (that is wrong in my example)
Jan 27 13:16:27 <wallycharlo> at the moment i have /opt/libexec/telnetd here
Jan 27 13:16:36 <wallycharlo> should i change ? 
Jan 27 13:16:43 <caplink811> yes, pls
Jan 27 13:16:57 <wallycharlo> k
Jan 27 13:17:26 <caplink811> myself use the telnetd from package inetutils, which is in /opt/libexec, but on your slug, the linksys telnetd is in /usr/sbin
Jan 27 13:17:40 <caplink811> you can test it by execute the command
Jan 27 13:17:41 <wallycharlo> will the telnet work automatically now ? 
Jan 27 13:18:02 <caplink811> /opt/etc/init.d/S10xinetd
Jan 27 13:18:13 <caplink811> and then try to open a 2nd telnet session
Jan 27 13:18:43 <wallycharlo> i ran that command and now have a 2nd session open
Jan 27 13:18:49 <caplink811> k, last test
Jan 27 13:19:07 <caplink811> ps -af | grep xinetd
Jan 27 13:19:16 <caplink811> should show you a line like this
Jan 27 13:19:26 <wallycharlo>  483         root       2276   S   /opt/sbin/xinetd
Jan 27 13:19:26 <wallycharlo>   489 ttyp1   root       2696   S   grep xinetd
Jan 27 13:19:51 <caplink811> ok, so xinetd is running
Jan 27 13:19:57 <wallycharlo> so now it works
Jan 27 13:19:59 <wallycharlo> ?
Jan 27 13:20:19 <caplink811> you can now reboot with hd, and try to login without enabling telnet in the webinterface
Jan 27 13:20:25 <wallycharlo> k
Jan 27 13:20:28 <wallycharlo> one mo
Jan 27 13:22:39 <wallycharlo> ok cap, it works ... many thanks for the help ... maybe i can return the compliment .... are you a member of the dreambox community ? ... if so i have something to offer you 
Jan 27 13:23:16 <caplink811> no, video streaming isn't my passion
Jan 27 13:23:29 <wallycharlo> u know dreambox ? 
Jan 27 13:23:58 <caplink811> not realy, something with video, or sat receiver, duno
Jan 27 13:24:23 <wallycharlo> yes sat ...can i ask which coutry u r from ? 
Jan 27 13:25:23 <caplink811> germany, and tv comes from the wall outlet ;)
Jan 27 13:25:31 <wallycharlo> passt
Jan 27 13:25:51 <caplink811> #nslu2-german may be better
Jan 27 13:26:08 <wallycharlo> its not my muttersprache
Jan 27 13:26:13 <caplink811> k
Jan 27 13:26:21 <wallycharlo> i am what u call an auslaender
Jan 27 13:26:24 <wallycharlo> ;)
Jan 27 13:26:36 <caplink811> where do you come from?
Jan 27 13:26:40 <wallycharlo> ireland
Jan 27 13:26:46 <caplink811> nice
Jan 27 13:26:48 <wallycharlo> i live in austria
Jan 27 13:27:09 <wallycharlo> i have a dreambox server
Jan 27 13:27:25 <caplink811> if you like the winter, then you are at the right place, at this time of the year
Jan 27 13:27:49 <wallycharlo> yes, i like snowboard and mountainbike
Jan 27 13:27:54 <wallycharlo> btw ... 
Jan 27 13:28:09 <wallycharlo> i think u should add a package to the official site
Jan 27 13:28:14 <wallycharlo> dp500serv
Jan 27 13:28:22 <wallycharlo> i had to manually install 
Jan 27 13:28:43 <wallycharlo> its a server for kiss divx player , ethernet mounted
Jan 27 13:29:54 <caplink811> ahja, found that http://members.home.nl/lhspiljard/guide/Guide/DP500Serv.html
Jan 27 13:30:00 <wallycharlo> yes
Jan 27 13:30:36 <caplink811> which is a little outdated (with focus on nslu2)
Jan 27 13:32:19 <wallycharlo> one mo ... i know the updated link
Jan 27 13:33:40 <wallycharlo> latest version always here
Jan 27 13:34:04 <wallycharlo> http://www.big-fw.prv.pl/nslu2/
Jan 27 13:35:41 <caplink811> hm, i'll try to build a package this weekend, but i need someone to test it.... /msg is ok for you ?
Jan 27 13:37:45 <wallycharlo> not sure what u mean by that ...
Jan 27 13:37:59 <wallycharlo> u mean talk in private i think ? 
Jan 27 13:38:24 <wallycharlo> sure
Jan 27 13:38:29 <caplink811> yep, need a mail adress
Jan 27 13:38:36 <wallycharlo> u can also msn me if u wish 
Jan 27 13:39:22 <wallycharlo> sure
Jan 27 13:40:05 <caplink811> msn seems to be ok, too
Jan 27 13:40:22 <wallycharlo> k .. did u get my address ? 
Jan 27 13:40:42 <caplink811> no, are you a registered user at freenode ?
Jan 27 13:40:46 <wallycharlo> no
Jan 27 13:41:09 <wallycharlo> how do i send u a private message here ? 
Jan 27 13:41:35 <caplink811> if you aren't a registered user, it wont wrok
Jan 27 13:42:30 <wallycharlo> fuck it, i only use it for spaminducedshit anyway !
Jan 27 13:42:40 <wallycharlo> ipkearney@hotmail.com
Jan 27 13:42:46 <wallycharlo> my msn 
Jan 27 13:42:51 <caplink811> msn, don't work for me.. write your adress to caplink@gmx.net
Jan 27 13:43:13 <wallycharlo> ok 
Jan 27 13:43:37 <capbot> mika_ :)
Jan 27 13:43:46 <wallycharlo> can we not just chat in a private room somehow ? 
Jan 27 13:43:47 <Mika_> hello capbot 
Jan 27 13:44:42 <wallycharlo> caplink i have another Q
Jan 27 13:44:49 <caplink811> k
Jan 27 13:45:28 <wallycharlo> is there someway i can copy my whole setup now ... so if i fuck it up in the future i can copy it all back .. like a backup 
Jan 27 13:47:19 <caplink811> normally, you need 4 directories to backup, /unslung and /opt/etc (unslung "configs) and /etc and /share/hdd/conf (linkys config)
Jan 27 13:47:55 <wallycharlo> can i not just copy everything from / to another disk ? 
Jan 27 13:48:15 <caplink811> and you should list all installed packages to a file, which you should save too, with ipkg list_installed > installed_apackages.txt
Jan 27 13:48:42 <caplink811> you can, this is a full backup
Jan 27 13:48:53 <wallycharlo> this is the best way, rigth ? 
Jan 27 13:49:06 <caplink811> but with the biggest size
Jan 27 13:49:30 <wallycharlo> i have a 300GB disk 
Jan 27 13:49:35 <wallycharlo> so no prob i think
Jan 27 13:50:18 <caplink811> but if you wnat use cp then you should have a look at the cp options
Jan 27 13:50:24 <wallycharlo> ok 
Jan 27 13:50:28 <wallycharlo> cp -rf ? 
Jan 27 13:50:28 <caplink811> s/wnat/want
Jan 27 13:52:34 <caplink811> cp -dpRf
Jan 27 13:52:39 <wallycharlo> ive used unix for 9 years now so i am a little familiar
Jan 27 13:52:43 <wallycharlo> at work ... 
Jan 27 13:52:50 <wallycharlo> but should know more :)
Jan 27 13:54:01 <wallycharlo>  cp -dpRf > backup
Jan 27 13:54:01 <wallycharlo> BusyBox v0.60.4 (2004.05.28-07:40+0000) multi-call binary
Jan 27 13:54:01 <wallycharlo> Usage: cp [OPTION]... SOURCE DEST
Jan 27 13:54:13 <wallycharlo> wont work ... 
Jan 27 13:55:05 <wallycharlo> cp -dpRf ./ > backup
Jan 27 14:01:43 <wallycharlo> ok man if u want me to help you out with your package just mail me 
Jan 27 14:01:53 <wallycharlo> hotmail.com after my nick here
Jan 27 14:01:58 <wallycharlo> thanks a mill
Jan 27 14:02:02 <wallycharlo> servus ... 
Jan 27 14:19:13 <Guest6558> hi
Jan 27 14:19:53 <Guest6558> how can i do the nickthing
Jan 27 14:21:15 <philips> Guest6558: /nick foo?
Jan 27 14:21:23 <Guest6558> hey wally 
Jan 27 14:21:29 <wallycharlo> hello
Jan 27 14:21:30 <Guest6558> o o k
Jan 27 14:21:43 <wallycharlo> how are u ? 
Jan 27 14:21:53 <presenter_max> 25
Jan 27 14:22:15 <presenter_max> i unslung my slug just a few minutes ago
Jan 27 14:22:52 <wallycharlo> anyway ... i have yet another Q for u boys ... is there a command remove_user, just as there is one for adduser ? 
Jan 27 14:27:58 <caplink811> maybe, that is in package adduser
Jan 27 14:28:42 <caplink811> it is -> deluser
Jan 27 14:29:09 <wallycharlo> danke
Jan 27 14:30:07 <ciaran> can I use a single NTFS or FAT32 disk as the primary volume, if I install Unslung?
Jan 27 14:30:23 <ciaran> or does the NSLU2 always have to boot from an EXT3 drive?
Jan 27 14:36:56 <presenter_max> lol i does anyone know the root password after unsluning
Jan 27 14:37:27 <caplink811> ciaran,  you could use a fat32 drive, as a drive e.g. on the 2nd port, but when you would have a fully featured slug, with the possibility to install package, then you need a drive with at least 3 partitions formatted by the slug
Jan 27 14:37:43 <ciaran> hm
Jan 27 14:37:54 <caplink811> presenter_max,  uNSLUng it is, when you boot without hd plugged
Jan 27 14:38:10 <presenter_max> yes i know i cant connect
Jan 27 14:38:33 <presenter_max> telnet doesnt responde
Jan 27 14:38:37 <ciaran> I'm running the default firmware and it's all working ok, I'd just like to also use it with my laptop occasionally too
Jan 27 14:39:03 <caplink811> presenter_max,  do you have enalbed it in the webinterface after the reboot?
Jan 27 14:39:12 <ciaran> maybe i can find some osx EXT3 drivers somewhere
Jan 27 14:39:22 <presenter_max> thanks
Jan 27 14:41:41 <caplink811> hm, a fat32 drive should recognised by the nslu, which firmware version is on your nslu2?
Jan 27 14:43:02 <ciaran> caplink - it's recognised but I can't change users etc.
Jan 27 14:43:15 <presenter_max> i just unslung the thing today, can someone recoment an easy package to install first?
Jan 27 14:44:07 <caplink811> ciaran,  you could use a cheap usb-mem stick as "main drive" and your fat32 drive as a 2nd
Jan 27 14:44:56 <ciaran> caplink -ah, good idea
Jan 27 14:45:06 <caplink811> size >= 256MB
Jan 27 14:45:15 <presenter_max> Hi caplink
Jan 27 14:45:23 <ciaran> caplink - that's good info, thanks
Jan 27 14:45:39 <ciaran> hm I have a card reader and a memory card lying around , reckon that'll work?
Jan 27 14:45:48 <ciaran> it tends to get recognised as a hub+4drives
Jan 27 14:46:37 <caplink811> ciaran,  that is a page you should read, problem is, it works only with unslung fw
Jan 27 14:46:38 <caplink811> http://www.nslu2-linux.org/wiki/HowTo/UseAMemoryStickAsMainDrive
Jan 27 14:47:08 <caplink811> ciaran,  with unslung fw, there can be only one drive at a time at a port
Jan 27 14:48:12 <ciaran> caplink - I was planning to go to Unslung anyhow, so that's not a problem
Jan 27 14:48:40 <ciaran> I'll pick up a USB stick tomorrow
**** ENDING LOGGING AT Sat Jan 28 02:59:57 2006