**** BEGIN LOGGING AT Mon Feb 13 10:59:56 2006
Feb 13 12:07:13 <Drinkalot> hi, anybody have an icybox and trouble with the usb connection? my icybox gets disconnected very often because the usb plug dosn't fit tight. is this with all icyboxes or should I give it back and get a new one?
Feb 13 12:11:55 <Drinkalot> or could this be a slug / unslung problem?
Feb 13 12:39:56 <Tenkawa> wow how loose is that connection
Feb 13 12:41:51 <Drinkalot> well, I can easily move the plug 1mm in each direction. and so the disk disconnects the light goes off and the slug doesnt work anymore
Feb 13 12:42:37 <Tenkawa> ouch
Feb 13 12:45:09 <Drinkalot> yep
Feb 13 12:54:38 <Drinkalot> I just wanna make sure it's not the slug or the software
Feb 13 13:28:18 <Tenkawa> so far so good
Feb 13 13:28:20 <Tenkawa>  08:29:23 up 2 days,  1:32,  4 users,  load average: 1.13, 1.03, 1.01
Feb 13 13:29:47 <Eiffel|afk> top - 14:30:20 up 11 days, 20:50,  0 users,  load average: 1.00, 1.00, 1.00
Feb 13 13:29:48 <Eiffel|afk> :-)
Feb 13 13:35:20 <Tenkawa> well I only bought it friday so 
Feb 13 13:35:22 <Tenkawa> )
Feb 13 13:35:24 <Tenkawa> :)
Feb 13 13:36:15 <Tenkawa> running irssi, pork, ssh, and screen with no problems so far
Feb 13 13:36:26 <Tenkawa> even got it to boot off my 4 gig microdrive
Feb 13 13:36:27 <Tenkawa> heheheh
Feb 13 13:56:50 <Eiffel|afk> :-)
Feb 13 13:59:27 <Eiffel|afk> i am running ctorrent, streamripper, itunes server, pavuk a website ripper, and some times an irc bouncer
Feb 13 16:52:20 <NSLU2-IRC> good morning
Feb 13 17:42:03 <madsci65> anyone available for troubleshooting?
Feb 13 17:42:57 <EvilDevil> depends ;)
Feb 13 17:43:47 <madsci65> messing around with hubs has caused the nslu2 to show disk 1 as not formatted, even after removing the hub and pluging it directly in and rebooting
Feb 13 17:43:53 <madsci65> i have unslung 5.5
Feb 13 17:45:40 <madsci65> any ideas?
Feb 13 17:46:30 <EvilDevil> madsci65 http://www.nslu2-linux.org/wiki/FAQ/USBHubs  or  http://www.nslu2-linux.org/wiki/FAQ/Disk2Showing0Free ?
Feb 13 17:47:46 <EvilDevil> if this doesn't help, you might want to enable telnet and check the logs
Feb 13 17:49:12 <madsci65> i had already looked at both faq, no help
Feb 13 17:49:56 <madsci65> ooo, never mind, i had to restart the nslu2 AND the hard drive, thanks anyway, works now
Feb 13 17:50:42 <EvilDevil> that's the best way to fix problems ;)
Feb 13 17:53:23 <madsci65> i wouldnt have thought the hdd would need restarting, it must be some hicup in its chipset
Feb 13 17:54:35 <EvilDevil> or the usb-to-ide chip
Feb 13 17:55:54 <madsci65> thats what i meant, wierd. thank goodness for no data loss, later
Feb 13 20:01:53 <Delysidney> hey
Feb 13 20:02:43 <Delysidney> theres a broken link in the wiki
Feb 13 20:02:45 <Delysidney> http://www.nslu2-linux.org/wiki/Unslung/HomePage
Feb 13 20:04:04 <Delysidney> the link to http://ipkg.nslu2-linux.org/ipkg/Packages doesn't work
Feb 13 22:09:02 <pumpkin0> Anybody seen this: "nfs: RPC call returned error 101" and "RPC: sendmsg returned error 101" in the syslog of a linux-PC trying to mount a NFS served by openslug 2.7 ? It works just fine after repeating that error over and over again for 40 seconds.
Feb 13 22:11:05 <neongrau> "...have you tried forcing an unexpected reboot?" ;)
Feb 13 22:15:41 <pumpkin0> ? both systems were rebooted to test configurations several times ... ?
Feb 13 22:20:36 <Madkiss> Does the UnSlung-Firmware just allow me to initialize disks like the original Firmware does?
Feb 13 22:23:49 <neongrau> Madkiss: not "just" it allows you to access them like you can on "any" linux box
Feb 13 22:24:17 <Madkiss> ahum
Feb 13 22:24:55 <neongrau> Madkiss: but it retains the "full" features of the original (webconfig i.e)
Feb 13 22:25:25 <pumpkin0> Madkiss: Unslung contains the SAME webinterface then the standard FW. If you switch to openSlug stuff get's more complicated.
Feb 13 22:35:35 <andrew_redfern> hi everyone
Feb 13 22:35:46 <andrew_redfern> pumpkin0: thanks for the edit
Feb 13 22:36:03 <andrew_redfern> I've updated the page but I'm still having problems
Feb 13 22:36:16 <andrew_redfern> http://www.nslu2-linux.org/wiki/OpenSlug/ApachePHP
Feb 13 22:37:19 <pumpkin0> The page has not changes, did you save a new version ?
Feb 13 22:42:05 <dnld> I was able to delete the directory /share/hdd/conf. How do I recover from that?
Feb 13 22:43:07 <dnld> The web interface keep telling me disk 1 is not formatted...
Feb 13 22:43:25 <dnld> I have no data on the disk
Feb 13 22:44:27 <pumpkin0> dnld: do you have anotherPC around ?
Feb 13 22:44:50 <dnld> yes
Feb 13 22:45:25 <pumpkin0> Easy way out: connect the HD to the other PC and remove all partitions. Plug it back into the slug, reformat and off you go.
Feb 13 22:47:53 <dnld> OK. I have an WinXP PC here. Do you know if there is any tools in XP that can repartition the drive?
Feb 13 22:48:08 <EvilDevil> management console :)
Feb 13 22:48:39 <EvilDevil> you'll need to set the fs type somewhere else
Feb 13 22:48:45 <andrew_redfern> ok sorry pumpkin0...I forgot to hit save
Feb 13 22:48:51 <andrew_redfern> it should be up now
Feb 13 22:50:00 <dnld> EvilDevil: Was that for me? 
Feb 13 22:51:49 <andrew_redfern> so why does it want httpd.conf to be a directory?
Feb 13 22:52:09 <EvilDevil> dnld kind of, but i think it'll be rather useless
Feb 13 22:52:14 <pumpkin0> no_no_no... DocumentRoot is simple. open httpd.conf and serach for "DocumentRoot". put in a valid directory (like "/").
Feb 13 22:52:35 <andrew_redfern> ok I'll try that
Feb 13 22:52:37 <andrew_redfern> thanks
Feb 13 22:53:09 <pumpkin0> DocumentRoot is the place where your stuff for your HP is saved. your scripts, html-files...
Feb 13 22:53:19 <dnld> EvilDevil: I found it... Thanks...:-)
Feb 13 22:54:28 <andrew_redfern> hmmm ok I thought each user had there own under wwww or public_html
Feb 13 22:54:41 <andrew_redfern> or something like that
Feb 13 22:55:10 <pumpkin0> andrew_redfern: with enough mod_XYZ you can get something like that. But with the mem and speed of the slug it's safer to go the usual way.
Feb 13 22:56:20 <neongrau> hmm speed, i'm thinking about underlcoking my slug tomorrow
Feb 13 22:58:17 <andrew_redfern> pumpkin0: so by doing it this way all that users can have one file to put html or php pages in and run
Feb 13 22:58:42 <andrew_redfern> so if I do /home/www as DocumentRoot
Feb 13 22:58:54 <andrew_redfern> then it will be there they should put files?
Feb 13 22:59:04 <pumpkin0> andrew_redfern: wait a sec., i have to find the doc mod_user
Feb 13 23:01:07 <dnld> punpkin: It does not seem to recognice the drive when all partitions are deleted
Feb 13 23:01:39 <dnld> pumkin0:I tried making one primary partition as well. No result
Feb 13 23:01:54 <pumpkin0> dnld: did you unplug the disc while the slug was running ?
Feb 13 23:02:09 <dnld> yup
Feb 13 23:02:16 <dnld> should I reboot...:-)
Feb 13 23:02:36 <pumpkin0> unplug the power for the slug and try again....
Feb 13 23:03:10 <dnld> thanks...:-)
Feb 13 23:05:38 <dnld> Will there be a unslung version based on R63 as well?
Feb 13 23:06:58 <caplink811_log> dnld, as binary (beta) not yet, as alpha (compile it by your self), yes
Feb 13 23:08:10 <dnld> Great. Thanks.
Feb 13 23:08:23 <pumpkin0> andrew_redfern: sorry, had a little problem. => http://httpd.apache.org/docs/2.0/mod/mod_userdir.html 
Feb 13 23:11:08 <andrew_redfern> pumpkin0: so what does this do with DocumentRoot?
Feb 13 23:13:01 <andrew_redfern> hmmm ok so I get libxml to install now without errors after making a few more changes to the .conf file
Feb 13 23:13:10 <pumpkin0> andrew_redfern: nothing. You get a main-webroot (stored under documentroot) with http://yourserver/ and userdirs (stored under /home/username/public_html/) under http://yourserver/~username/
Feb 13 23:13:40 <andrew_redfern> now when I try running /etc/init.d/S80apache start
Feb 13 23:13:50 <pumpkin0> good luck.
Feb 13 23:13:55 <andrew_redfern> I get http not running, trying to start
Feb 13 23:14:12 <andrew_redfern> but when I do top after that I don't see it running
Feb 13 23:14:25 <pumpkin0> ps aux ? 
Feb 13 23:14:37 <pumpkin0> run "ps aux" to get the complet list 
Feb 13 23:15:34 <andrew_redfern> pumpkin0: just tried that and don't see httpd anywhere
Feb 13 23:15:54 <pumpkin0> no errors after /etc/init.d/S80apache start ?
Feb 13 23:16:03 <andrew_redfern> nope
Feb 13 23:16:19 <andrew_redfern> I don't know maybe I should try restarting it 
Feb 13 23:16:32 <andrew_redfern> I've made a lot of changes in the past few days
Feb 13 23:16:55 <andrew_redfern> pumpkin0: do you think this would be a good idea
Feb 13 23:17:44 <pumpkin0> a restart form time to time is a good idea. Let's hope you didn't make a fatal mistake..
Feb 13 23:17:56 <andrew_redfern> yeah me too
Feb 13 23:18:03 <andrew_redfern> here we go...
Feb 13 23:18:35 <pumpkin0> Another idea: do you have already something running at ports 80 and/or 8080 ?
Feb 13 23:23:54 <andrew_redfern> yeah most likely I should change that...wouldn't that give me an error though?
Feb 13 23:24:31 <pumpkin0> andrew_redfern: i hope it gives you an error. But check the log /var/log/... and /opt/var/log... anyway
Feb 13 23:33:20 <andrew_redfern> pumpkin0: well it looks like it rebooted ok so is it the Listen var that I want to change in the config file?
Feb 13 23:36:02 <andrew_redfern> looks like there are some errors in the log file I need to read through but coffee first
Feb 13 23:36:07 <andrew_redfern> be back in a few
Feb 13 23:36:15 <andrew_redfern> thanks for your help pumpkin0
Feb 13 23:37:21 <pumpkin0> yes, the Listen-var is important. Post the log somewhere, perhaps sb knows that errors...
Feb 14 00:54:37 <andrew_redfern> ok I'm back with coffee
Feb 14 00:55:04 <andrew_redfern> pumpkin0: here is the first thing that looks like an error in the log
Feb 14 00:55:49 <andrew_redfern> [Mon Mar 13 18:21:25 2006] [error] (2)No such file or directory: Couldn't bind unind unix domain socket /opt/var/apache2/run/cgisock
Feb 14 01:01:39 <andrew_redfern> ok looks like linking errors 
Feb 14 01:02:02 <andrew_redfern> pumpkin0: is cgisock a file or dir?
Feb 14 01:03:55 <andrew_redfern> wow pumpkin0 I think I've got it
Feb 14 01:03:56 <andrew_redfern> thanks
Feb 14 01:04:03 <andrew_redfern> I'll need to play some more
Feb 14 01:04:11 <andrew_redfern> but I'll be sure to right it up
Feb 14 02:35:03 <tuv> has anyone tried smartmontools on unslung? is it safe to use on usb drives?
Feb 14 02:46:35 <andrew_redfern> has anyone played with java on the slug?  I found a link but not sure how up to date it is.
Feb 14 02:58:45 <andrew_redfern> alright here's a quicky is libstdcc++6 not the same as libstdcc++
Feb 14 05:09:41 <tuv> has anyone tried smartmontools on unslung? is it safe to use on usb drives?
Feb 14 07:38:15 <Lacsi> hello all
Feb 14 07:38:21 <Lacsi> anyone knows about when will be libusb 0.1.11 available in cvs?
Feb 14 07:39:05 <Eiffel|afk> hm dunno but you could ask in #nslu2-linux there are some developers
Feb 14 07:39:17 <Lacsi> 10x i did
Feb 14 07:41:34 <Eiffel|afk> if you donīt want to idle until someone is there you can try the yahoo groups
Feb 14 07:43:38 <Eiffel|afk> http://groups.yahoo.com/group/nslu2-general/ or http://groups.yahoo.com/group/nslu2-linux/
Feb 14 10:52:57 <pumpkin0> tuv: the smart-commands are usually not passing throught USB <-> IDE Chips. It's save to use because it doesn't do anything....
**** ENDING LOGGING AT Tue Feb 14 10:59:56 2006