**** BEGIN LOGGING AT Sat Mar 04 10:59:57 2006 Mar 04 12:05:16 Anyone remember the nslu2's defaukt ip? Mar 04 12:05:20 er default Mar 04 12:09:08 ok found t.. nm Mar 04 12:15:30 I'vve got a slug running openslug 2.7. whats the best/practical way to get unslung on it Mar 04 12:17:10 ok ttthink I found it Mar 04 12:25:28 hrmm Mar 04 12:25:43 I fire up the slug with reset on and the light just ges out after a feew seconds Mar 04 12:26:26 which light? Mar 04 12:26:29 front Mar 04 12:26:45 ha ha. there's five of them on the front.. you mean the power switch? Mar 04 12:26:53 ya Mar 04 12:26:56 (bit sleeepy) Mar 04 12:27:10 it beeps then the light goes out Mar 04 12:27:16 what are you trying to do, get it into upgrade mode? Mar 04 12:27:20 yep Mar 04 12:27:33 if I let it boot it gets back into openslugg Mar 04 12:27:35 what you need to do is put something in the reset hole at the back - a paperclip or something. i used a pushpin. Mar 04 12:27:41 I did Mar 04 12:27:49 held that in.. pressed power Mar 04 12:27:52 wated 10 seconds Mar 04 12:28:00 beeped.. then lights went out Mar 04 12:28:04 unplug all the drives so all you've got is ethernet and power plugged in. keep the object in the hole, push power briefly. Mar 04 12:28:10 yyyep Mar 04 12:28:14 thats what I did Mar 04 12:28:25 wait until the light goes red, then as soon as it does, let it fall out. Mar 04 12:28:38 I recall this being a bugger the last time I tried Mar 04 12:28:46 i had no trouble doing it on mine... Mar 04 12:28:57 it was purely timing fault on my part Mar 04 12:30:06 it is a bit of a pain Mar 04 12:30:23 hm. I watched it closer and when 1 light went out they all did Mar 04 12:30:42 thats why i used the pushpin. i held the slug with the silver part upright, then when the status light went red i let the pin fall out Mar 04 12:31:29 do you know if openslug has a upgraade method on a running box? Mar 04 12:33:37 brb Mar 04 12:43:13 got it :) Mar 04 12:44:00 Server Name: slug Mar 04 12:44:00 Version: V2.3R29-uNSLUng-5.5-beta Mar 04 12:44:01 woohooo Mar 04 12:48:53 gotta reformat-recopy my data now though what fun Mar 04 12:51:46 80 gig drive format via usb takes a bit Mar 04 12:58:34 ok 45 gig ccopy has started Mar 04 12:58:41 thanks for the help Mar 04 14:32:17 someone here with a good working dnsmasq config ? Mar 04 19:15:19 yes dnsmasq is working ..what a hell that config :) Mar 04 19:38:09 hey capbot Mar 04 19:54:55 how big is the NSLU2 ? Mar 04 19:54:57 physically Mar 04 20:02:39 Like a (not to small) grown male palm. Mar 04 20:03:00 fontp: It's quite small. Nice hardware. Mar 04 20:04:57 cool Mar 04 20:05:09 fontp: My lacie Porsche USB hard disk it about 4 times larger (and got much more weight). Mar 04 20:09:13 cool Mar 04 20:15:07 fontp: 130mm x 21mm x 91mm http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1118334819312&pagename=Linksys%2FCommon%2FVisitorWrapper Mar 04 20:52:20 caplink811_log: how are you Mar 04 20:52:45 hi mika_ , fine, and you Mar 04 20:55:34 I am having trobule overclocking my slug Mar 04 20:56:17 what kind of trouble? Mar 04 20:56:26 all of my pilers are too big Mar 04 20:56:42 nail clippers too big and I do not have a soldering iron Mar 04 20:56:52 best i've got is a stanley knife Mar 04 20:58:56 so divide the resistor in 2 parts, and make sure, that you don't damage the board, and don't destroy the remaining strip lines Mar 04 20:59:21 any teachers Mar 04 20:59:29 oops wrong one Mar 04 20:59:39 ok Mar 04 20:59:42 will try it Mar 04 21:00:00 good luck ;) Mar 04 21:07:54 fine to caplink811_log ..sorry for the late response i was heck some logs :) Mar 04 21:08:27 np, doing some self study, aka web based trainings (baeh) Mar 04 21:09:29 nice heheh..i have to do 3 or 4 cd`s with that shit before next month but i wil do it at my work i have told then the cd`s wil not work in linux so i can not make them at home Mar 04 21:14:24 imho, is doing it at home much more comfortable, and it is work time too :) Mar 04 21:15:05 ok for you it is worktime for me is it free time.. Mar 04 21:16:28 what is ugly.. Mar 04 21:16:33 caplink811_log: do you know if i can at a config at the website howto from dnsmasq Mar 04 21:16:48 yes they hate to pay for study what you do at home Mar 04 21:17:15 mika_, dunno, have you tried that? Mar 04 21:17:58 normally, only the index pages are write protected Mar 04 21:18:01 nope not yet but i have install it today at my nslu and i miss a good config there and now i have one build so maybe other people like it Mar 04 21:18:10 lets try :) Mar 04 21:24:12 i think it works caplink811_log .. Mar 04 21:24:31 the ip out of the bos is 192.168.1.97 ? or not caplink811_log Mar 04 21:25:04 because i wil change mine changes to make it read beter Mar 04 21:26:20 1.77 it is Mar 04 21:26:37 ok thx i forgot because it is diff here Mar 04 21:27:09 well I have snapped the resistor and put the case back on, but does it still work? Mar 04 21:33:04 :D 263.78 BogoMIPS Mar 04 21:33:50 it seems so.. Mar 04 21:34:43 now, I am sure that I have some pc133 laying around.... Mar 04 21:45:35 caplink811_log: done :) Mar 04 21:47:47 looks ok to me ;) Mar 04 21:49:49 if there things are wrong i see it there lol Mar 04 21:56:26 did you try some new thinks with your slug caplink811_log Mar 04 21:57:35 mika_, no didn't, no spare time atm, basically i have to travel around, and do things for my employer Mar 04 21:58:40 ok same like me..just today i start with this dns because i got a new modem with no dns server inside :S Mar 04 21:59:38 that is an applicable reason :) Mar 04 22:00:31 it makes my life easyer.. now it is done **** BEGIN LOGGING AT Sat Mar 04 22:47:34 2006 Mar 04 22:47:58 no, no much config, just one line in /etc/crontab Mar 04 22:48:01 0-59/20 * * * * root /opt/bin/ntpclient -s -h 192.168.1.100 &>/dev/null Mar 04 22:48:37 like that, every 20 minutes, it asks 192.168.1.100 for the actual time, and set the clock to that time Mar 04 22:48:38 192.168.1.100 is where he get the time from ? Mar 04 22:48:58 ok i must look for a server outside Mar 04 22:49:05 that is my router, but it could be ntp.timepool.org, or something else Mar 04 22:49:37 at startup i initialize the time with that Mar 04 22:50:15 [root@linus unslung]$ cat rc.rstimezone Mar 04 22:50:15 #!/bin/sh Mar 04 22:50:15 # Mar 04 22:50:16 /usr/sbin/Set_TimeZone >/dev/null Mar 04 22:50:16 /usr/sbin/hwclock --hctosys >/dev/null Mar 04 22:50:18 if [ -x /opt/bin/ntpclient ]; then Mar 04 22:50:20 /opt/bin/ntpclient -h 192.168.1.100 -s >/dev/null Mar 04 22:50:24 /usr/sbin/hwclock --systohc >/dev/null Mar 04 22:50:27 fi Mar 04 22:50:27 return 0 Mar 04 22:51:10 ok lets try :) Mar 04 22:51:17 which fits perfect my needs, because my slug drifts around a hour at a day Mar 04 22:52:57 yes my time is also not good is that a problem with the nslu or is it because the prosesor hack Mar 04 23:02:16 orda, feed me, please.. **** BEGIN LOGGING AT Sat Mar 04 23:04:08 2006 **** BEGIN LOGGING AT Sat Mar 04 23:09:36 2006 Mar 04 23:57:57 time to go sleep...night all Mar 05 00:08:47 caplink811_log: one quick question if you are still here Mar 05 00:08:58 is this also stillin you cron : Mar 05 00:09:01 1 * * * * root /usr/sbin/hwclock -s &>/dev/null Mar 05 00:14:33 Hi mika_: That line is commented out in my crontab, and just this line for ntp and clock: Mar 05 00:14:38 1,31 * * * * root /opt/bin/ntpclient -s -h ntp.dls.net >>/var/log/ntp.log 2>&1 && hwclock --systohc --utc >>/var/log/ntp.log 2>&1 Mar 05 00:15:34 Every 30 minutes seems often, but I discovered that the clock drifts very much and it broke my UPS monitoring software unless I synced the clock with ntpclient more often than once per hour Mar 05 00:16:25 http://ipkg.nslu2-linux.org/feeds/unslung/cross/groff_1.19.1-4_armeb.ipk <-- whatever that redirects to gives a 404 :( Mar 05 00:16:37 mwester: /usr/sbin/CheckDiskFull is also not in your cron ? Mar 05 00:16:44 and it's needed for unslung-devel :< Mar 05 00:17:56 Yes, CheckDiskFull remains. I don't think it will do anything, as the NSLU2 is in my basement, up in the ceiling with the router and other comms gear where I cannot hear the beeps! Mar 05 00:19:12 ahh Mar 05 00:19:16 ok that is what that do lol... i wil maybe hear it Mar 05 00:19:26 groff was updated at the time i tried to download it :D Mar 05 00:19:28 and mwester usr/sbin/WatchDog what is that then ? Mar 05 00:19:54 Hmmm. Don't know what that does. Mar 05 00:20:03 * mwester goes off to "strings" a binary... Mar 05 00:20:13 is it still in your cron ? Mar 05 00:20:38 thats a shell script Mar 05 00:20:53 looking if samba and the other default linksys stuff is running Mar 05 00:21:04 ok so keep it there Mar 05 00:22:03 Yep - is a shell script. Perhaps it, too, could use a diversion script so that we could have it restart or rotate logs on other packages? Hmmmm.... Mar 05 00:24:09 ok i wil keep it there Mar 05 00:37:30 good night all **** ENDING LOGGING AT Sun Mar 05 10:59:56 2006