**** BEGIN LOGGING AT Wed Mar 29 10:59:56 2006 Mar 29 12:44:47 anyone? Mar 29 15:03:41 <[TEHb]_> Hallo Guys! Mar 29 15:03:54 hi Mar 29 15:04:14 <[TEHb]_> How are you? Mar 29 15:05:00 <[TEHb]_> What kernel version used for NSLU2 now? Mar 29 15:13:41 which nslu2? unslung? or debianslug/openslug? Mar 29 15:14:25 <[TEHb]_> don't know Mar 29 15:14:33 <[TEHb]_> But any version already use 2.6 kernel? Mar 29 15:24:10 no. unslung uses 2.4.xx, but openslug/debianslug is now using 2.6.16 Mar 29 15:32:02 <[TEHb]_> As you know, 2.6 kernel doesn't support Little Endian Mar 29 15:32:18 <[TEHb]_> Then, OpenSlug is only Big Endian? Mar 29 15:32:47 <[TEHb]_> Intel Access Library v.2.1 also drop LE support Mar 29 15:35:20 * ilmari is running little-endian debian with 2.6.15 just fine Mar 29 15:35:43 Linux slug 2.6.15-1-nslu2 #2 Tue Mar 7 17:36:32 UTC 2006 armv5tel GNU/Linux Mar 29 15:36:25 plain debian, not debianslug, that is Mar 29 15:36:45 <[TEHb]_> ilmari: network working too? :-/ Mar 29 15:36:49 yup Mar 29 15:36:58 <[TEHb]_> but how? Mar 29 15:37:16 <[TEHb]_> ethernet adapter is intel NPE ? Mar 29 15:37:20 with the installer and kernel image from http://www.slug-firmware.net/ Mar 29 15:37:52 which is the standard etch beta 2 installer with the network driver added Mar 29 15:38:36 <[TEHb]_> But where i can get source of this kernel? Mar 29 15:39:20 http://www.debian.org/devel/debian-installer/ Mar 29 15:40:16 <[TEHb]_> ilmari: too many images, what image you use? Mar 29 15:41:41 the top ones at http://www.slug-firmware.net/d-dls.php Mar 29 15:42:04 note: that will install a full debian system onto the hard drive, only the kernel and initramfs will live in flash Mar 29 15:42:24 see http://www.cyrius.com/debian/nslu2/ for more on debian on the nslu2 Mar 29 15:43:26 <[TEHb]_> ilmari: are you developer ? Mar 29 15:44:05 nope Mar 29 15:45:40 evildevil@slug:~$ uname -a Mar 29 15:45:40 Linux slug 2.6.16 #1 Sun Feb 26 10:47:24 GMT 2006 armv5tel GNU/Linux Mar 29 15:45:51 <[TEHb]_> :-() Mar 29 15:45:56 <[TEHb]_> Can you run 'lsmod' ? Mar 29 15:46:12 evildevil@slug:~$ lsmod Mar 29 15:46:12 Module Size Used by Mar 29 15:46:12 rfcomm 24344 3 Mar 29 15:46:12 l2cap 13988 5 rfcomm Mar 29 15:46:12 nfsd 186128 13 Mar 29 15:46:13 exportfs 2752 1 nfsd Mar 29 15:46:15 lockd 45812 2 nfsd Mar 29 15:46:17 sunrpc 104576 8 nfsd,lockd Mar 29 15:46:19 ixp400_eth 17692 0 Mar 29 15:46:21 ixp400 945700 1 ixp400_eth Mar 29 15:46:23 hci_usb 8916 0 Mar 29 15:46:25 bluetooth 30236 5 rfcomm,l2cap,hci_usb Mar 29 15:46:27 pl2303 12548 0 Mar 29 15:46:29 usbserial 19280 1 pl2303 Mar 29 15:46:31 ext3 89448 2 Mar 29 15:46:33 jbd 37012 1 ext3 Mar 29 15:46:35 mbcache 3652 1 ext3 Mar 29 15:46:59 <[TEHb]_> EvilDevil: you build ixp400 and ixp400_eth modules from source ? Mar 29 15:47:23 i used the master makefile from nslu2-linux.org Mar 29 15:47:31 ilmari@slug:~$ lsmod|grep ^ixp Mar 29 15:47:31 ixp400_eth 45212 0 Mar 29 15:47:31 ixp400 1064644 1 ixp400_eth Mar 29 15:47:55 that's with the kernel from slug-firmware.net mentioned above Mar 29 15:48:20 <[TEHb]_> ilmari: http://www.debian.org/devel/debian-installer/ Mar 29 15:48:21 <[TEHb]_> ilmari: this ? Mar 29 15:48:38 no, http://www.slug-firmware.net/d-dls.php Mar 29 15:48:49 nope, that's the one without ixp4xx modules (untainted) Mar 29 15:49:41 <[TEHb]_> EvilDevil: ? Mar 29 15:50:08 <[TEHb]_> EvilDevil: oh, ofcourse, i need to download it myself from intel Mar 29 15:50:20 <[TEHb]_> debian-etch-beta2-20060311.zip ? Mar 29 15:51:03 no, the image from debian.org does not include the ixp400 ethernet modules, but the image from slug-firmware.net does include it Mar 29 15:51:09 <[TEHb]_> only 8.3Mb Mar 29 15:51:17 [TEHb]_: yes. that one contains two flash images. one containing the installer, and one with just a kernel and initramfs for use after installing Mar 29 15:51:36 [TEHb]_: see http://www.cyrius.com/debian/nslu2/ for instructions Mar 29 15:53:20 <[TEHb]_> Guys, maybe you know, who maintain this 2.6.16 kernel version for NSLU2? Mar 29 15:55:39 i think, it's mainly maintained by rod whitby Mar 29 15:55:50 http://cia.navi.cx/stats/project/nslu2-linux/.message/23293e Mar 29 15:56:42 <[TEHb]_> EvilDevil: is there any set of patches for kernel? Mar 29 15:56:44 <[TEHb]_> ? Mar 29 15:57:51 yeah Mar 29 15:58:28 <[TEHb]_> EvilDevil: nice! Where i can get it? Mar 29 15:59:15 http://www.nslu2-linux.org/wiki/Development/MasterMakefile Mar 29 16:01:00 <[TEHb]_> EvilDevil: nice! Thanks! Mar 29 16:03:33 <[TEHb]_> EvilDevil: you work in Little Endian mode with 2.6.16 ? Mar 29 16:11:39 yep Mar 29 16:19:49 <[TEHb]_> EvilDevil: makefile contain several targets. What target you use obviously? Mar 29 16:20:26 make debianslug Mar 29 16:20:51 <[TEHb]_> ok, i think i need this too Mar 29 16:21:07 that will result in a debianslug flashimage Mar 29 16:21:20 <[TEHb]_> No, i need only source Mar 29 16:21:29 <[TEHb]_> I do not need any image Mar 29 16:21:54 well.... you have to create a cross build environment for debianslug first Mar 29 16:22:04 then you can do cd ~/slug Mar 29 16:22:07 cd debianslug Mar 29 16:22:12 . ./setup-env Mar 29 16:22:39 bb -b openembedded/packages/linux/ixp4xx-kernel/2.6.16.bb (or something like that) Mar 29 16:23:16 <[TEHb]_> :-() Mar 29 16:25:02 <[TEHb]_> Maybe there is FTP servers, where i can get download kernel source? Without using MasterMakefile? Mar 29 16:27:46 * [TEHb]_ building boost Mar 29 17:00:07 <[TEHb]_> EvilDevil: sorry, but maybe you can make diff original 2.6.16 sources with patched 2.6.16 ? Mar 29 17:17:39 <[TEHb]_> bedrock: Hallo Mar 29 17:17:51 hi Mar 29 17:18:16 <[TEHb]_> what kernel version you use? Mar 29 17:19:38 i have openslug 2.7 beta, it's kernel is 2.6 Mar 29 17:20:34 <[TEHb]_> bedrock: did you use Master Makefile for building? Mar 29 17:21:54 at the moment, i have the sopenslug 2.7 binary image installed, but i am currently building from the master makefile Mar 29 17:22:07 i have previously built unslung 6.7 alpha, that was working fine Mar 29 17:22:21 but i want to use teh zd1211 wireless, i couldn't get that working under unslung Mar 29 17:22:32 <[TEHb]_> bedrock: can you please see in the build tree. There is kernel sources? Mar 29 17:23:33 7(14[TEHb]_7) kernel sources? i just executed the makefile... Mar 29 17:25:54 <[TEHb]_> bedrock: then, sources only start downloading? Mar 29 17:42:52 bedrock: I have zd1211 working nicely on Unslung 6.7 (now 6.8). Mar 29 17:43:49 There's a known build problem for Unslung, but easy to fix -- once past that the module loads and seems to work great. Mar 29 17:50:04 <[TEHb]_> Guys, if anyone has 2.6.16 kernel sources from any of distribs, please let me know Mar 29 18:02:39 i need help :S Mar 29 18:03:11 i've backupped my system disk (unslung) via the backup function from the web interface Mar 29 18:04:07 <[TEHb]_> Guys, what version work in Big Endian mode? Mar 29 18:04:33 you mean for use with a mac ? Mar 29 18:04:39 but when switch disks to boot from the new drive ssh wont start and i cant login via admin on the web interface either since somehow the users are all lost Mar 29 18:39:22 how do i create the .bin file to flash? Mar 29 18:40:38 i have already used makefile with ubuntu 5.10 Mar 29 19:04:15 JBScott3643: what did you build? Unslung, Openslug? Mar 29 20:08:58 I need help setting up CUPS Mar 29 20:10:49 I have CUPS installed, but I can't access the web interface Mar 29 20:11:09 have you installed cuos-docs too ? Mar 29 20:11:13 yes Mar 29 20:11:24 I followed the direction on the site up to... Mar 29 20:11:37 After installation, you will have to copy /opt/doc/cups/S88cups to /opt/etc/init.d and run the file. Go to /opt/etc/init.d and type: sh S88cups. Mar 29 20:11:38 that Mar 29 20:12:57 If I goto :631, I get 'Forbidden, You don't have permission to access the resource on this server.' Mar 29 20:13:11 could you verify that cupsd is running (using the ps -ef | grep cupsd command) ? Mar 29 20:13:29 CUBS# ps -ef | grep cupsd Mar 29 20:13:29 3762 root 4672 S /opt/sbin/cupsd Mar 29 20:13:29 3805 ttyp0 root 2696 S grep cupsd Mar 29 20:13:29 CUBS# Mar 29 20:15:01 I have Samba 3 installed btw, just incase that means anything Mar 29 20:15:40 in /opt/etc/cups/cupsd.conf there is a statement, make sure, that your network segment is there Mar 29 20:15:56 okay Mar 29 20:16:27 Mar 29 20:16:27 Order Deny,Allow Mar 29 20:16:27 Deny From All Mar 29 20:16:27 Allow From 127.0.0.1 Mar 29 20:16:27 Allow From 192.168.1.0/24 Mar 29 20:16:27 Mar 29 20:16:52 if your workstation is in 192.168.1.x, then yes Mar 29 20:17:05 I'm 192.168.2.200 Mar 29 20:17:36 then you should change this to Allow from 192.168.2.0/24 Mar 29 20:17:39 * caplink811_log is back soon, have to reboot Mar 29 20:18:05 k Mar 29 20:18:28 all my workstations are 192.168.2 and the nslu2 is 192.168.1 Mar 29 20:18:45 do I have to restart cupsd Mar 29 20:22:39 yes Mar 29 20:24:04 CUBS# sh S88cups Mar 29 20:24:04 cupsd: Child exited with status 98! Mar 29 20:24:04 CUBS# Mar 29 20:29:05 okay Mar 29 20:29:12 I got it running by changing 631 to 632 Mar 29 20:29:20 oh ya Mar 29 20:29:24 and I got web control now Mar 29 20:29:29 * Nimmit is learning Mar 29 20:29:54 ohya Mar 29 20:29:57 *oh ya Mar 29 20:30:03 and it's printing a test page as we speak Mar 29 20:31:09 only question, how do I integrate this with Samba Mar 29 20:33:25 nvm Mar 29 20:33:27 * Nimmit got that also Mar 29 20:34:10 thank you caplink811_log Mar 29 20:34:32 np, for samba integration you should search samba.org Mar 29 20:35:09 it's already integrated Mar 29 20:35:11 and working Mar 29 20:35:20 I just had to add one line to swat Mar 29 20:35:32 had to make the path: /dev/lp0 Mar 29 20:36:06 once I did that, Windows went from, can't connect, to connected Mar 29 20:36:07 fine Mar 29 20:38:05 eh, there's a problem though Mar 29 20:38:31 when I do try to print, Windows says: 'A StartDocPrinter call was not issued' Mar 29 20:39:21 that was from notepad Mar 29 20:43:33 okay, I was wrong Mar 29 20:43:40 it's still saying access denied, unable to connect Mar 29 20:58:33 caplink811_log Mar 29 21:15:47 Okay Mar 29 21:16:10 I got windows to send a print job to CUPS, and the http://cubs:632:/printers/hp990c Mar 29 21:16:23 shows the print job as being prpcessed Mar 29 21:16:26 but it's not printing Mar 29 21:19:04 says this in the web control for CUPS: Printer State: processing, accepting jobs. "USB port busy; will retry in 30 seconds..." Mar 30 04:32:39 anyone know why debian slug after power loss will not boot anymore? Mar 30 04:45:13 is there anyway I can get it back working again without reinstalling everything? Mar 30 08:03:54 okay Mar 30 08:04:01 is there a package to automatically update time Mar 30 08:04:10 my nslu2 loses time like crazy Mar 30 08:05:03 looking for something like rdate I guess Mar 30 08:17:39 try ntpclient Mar 30 08:18:40 http://www.nslu2-linux.org/wiki/HowTo/FixTheClockUsingAdjtimexAndNtpclient Mar 30 08:19:05 at the bottom of that side u can find an example how to do the cronjob Mar 30 08:25:46 thank you Mar 30 08:26:38 so just install it and make the cronjob to run it Mar 30 08:26:43 skip all that other stuff Mar 30 08:26:43 ? Mar 30 09:00:47 yes only the cronjob is needed Mar 30 09:03:00 hi **** ENDING LOGGING AT Thu Mar 30 10:59:56 2006