**** BEGIN LOGGING AT Tue May 02 09:59:56 2006
May 02 11:04:52 <NSLU2-IRC> i
May 02 11:05:36 <lukketto> hi everybody
May 02 11:05:51 <lukketto> my nslu2 see my usb pen as not formatted.....
May 02 11:06:32 <lukketto> I used cat /proc/bus/usb/devices | grep "I\:"
May 02 11:06:42 <lukketto> it shows me:
May 02 11:07:40 <lukketto> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
May 02 11:07:41 <lukketto> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
May 02 11:07:42 <lukketto> I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
May 02 11:08:05 <lukketto> I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(hub  ) Sub=00 Prot=00 Driver=usb-storage
May 02 11:08:28 <lukketto> is this the problem? Iconnected only the usb pen!
May 02 11:08:46 <lukketto> ????
May 02 11:10:06 <EvilDevil> i think your problem is already described at the nslu2-linux.org Wiki (FAQ section)
May 02 11:21:11 <lukketto> where?
May 02 11:37:12 <lukketto> However, I tried to upgrade, via web interface, to reinstall unslug 6.8 beta but I receive the message: "Error:bad name or format"
May 02 12:36:38 <Prometeo> hi
May 02 12:38:23 <drif> hi
May 02 18:11:17 <Reedy_Boy> Hi
May 02 18:12:16 <Reedy_Boy> anyone about?
May 02 18:12:23 <Reedy_Boy> (im not after any help)
May 02 18:13:17 <Reedy_Boy> well, just ideas
May 02 19:02:09 <Reedy_Boy> anyone got any ideas for labelling the slugs?
May 02 19:02:15 <Reedy_Boy> so i can remember which is which?
May 02 19:09:15 <EvilDevil> Reedy_Boy, why don't you put a sticker on them?
May 02 19:09:21 <Reedy_Boy> yeah
May 02 19:09:26 <Reedy_Boy> but i need to get some
May 02 19:09:26 <Reedy_Boy> lol
May 02 19:09:52 <EvilDevil> or paint a X on one of them and a Y on the other one
May 02 19:09:56 <Reedy_Boy> yeah
May 02 19:10:34 <Reedy_Boy> the unslung 6.8 doesn't take much longer than the normal r63 to boot
May 02 19:10:36 <EvilDevil> some people tend to put a sticker with the device's ip-address and hostname on it
May 02 19:10:54 <Reedy_Boy> yeah
May 02 19:10:54 <caplink811> or make one knop in the network cable, and two in the other
May 02 19:11:08 <Reedy_Boy> knot? you mean?
May 02 19:11:25 <EvilDevil> burn one, freeze the other
May 02 19:11:30 <Reedy_Boy> lol
May 02 19:11:50 <Reedy_Boy> ive currently got 1 unslung to a 512 flash disk on port 2, hopefully putting cups on it later
May 02 19:11:56 <caplink811> knurl burl hitch, other alternatives from my dict
May 02 19:12:12 <Reedy_Boy> on my other, i want to unsling also
May 02 19:12:30 <Reedy_Boy> i have a 512mb stick for it, and a 8GB La Cie Carte Orange
May 02 19:12:44 <Reedy_Boy> im not sure if i should just use the 2nd port and just use the 8gb,
May 02 19:12:51 <Reedy_Boy> i suppose that would allow me to distinguish
May 02 19:12:59 <Reedy_Boy> and then use it for LAMP
May 02 19:13:19 <Reedy_Boy> any opinions
May 02 19:13:19 <Reedy_Boy> ?
May 02 19:13:52 <Reedy_Boy> then i've got the two more functional first ports free
May 02 19:15:12 <Reedy_Boy> what does anyone else think?
May 02 19:22:40 <Reedy_Boy> i suppose its pointless using 2 slots
May 02 19:22:47 <Reedy_Boy> when its gonna use the 8gb device also
May 02 19:35:52 <Reedy_Boy> well that was mounted quicky
May 02 19:35:57 <Reedy_Boy> quickly
May 02 20:01:14 <Reedy_Boy> Can someone please advise me?
May 02 20:02:02 <Reedy_Boy> As this Lacie usb device ive got is actually a SEAGATE ST68022CF
May 02 20:02:17 <Reedy_Boy> which is a 1" hard drive
May 02 20:02:36 <Reedy_Boy> so do i need to do like touch /.ext3flash
May 02 20:03:00 <Reedy_Boy> and /sbin/swapoff /dev/sda3 ?
May 02 20:03:16 <Reedy_Boy> which are really told to be for flash drives not hard drives
May 02 20:24:59 <Reedy_Boy> My new slug is saying 'No directory, logging in with HOME=/'
May 02 20:36:05 <lukketto> hi !
May 02 20:36:47 <lukketto> If I try to upgrade to linksys firmware or other firmwaree I receive: "Error or bad format" .... what can I do?
May 02 20:37:47 <lukketto> anybosy?
May 02 20:37:54 <lukketto> anybody?
May 02 20:38:33 <Reedy_Boy> What are you on at the moment?
May 02 20:38:43 <lukketto> unslug 6.8
May 02 20:39:01 <caplink811> you would use the sercomm tool if you're in a win environment, or upslug2 if your environment is linux/mac, and you should bring the nslu2 in the uograde mode, see the wiki on that topic
May 02 20:39:03 <Reedy_Boy> is this on the web site?
May 02 20:39:17 <Reedy_Boy> cheers caplink811, saved me having to say it
May 02 20:39:24 <caplink811> np ;)
May 02 20:39:35 <caplink811> ~nslu2-wiki
May 02 20:39:36 <capbot> hmm... nslu2-wiki is the short-hand way of saying "Have a look at the NSLU2-Linux Wiki at http://www.nslu2-linux.org/".
May 02 20:40:18 <lukketto> Have I to enter in Redboot mode?
May 02 20:40:57 <Reedy_Boy> restart with the reset button in
May 02 20:41:06 <caplink811> no, bring the slug in upgrade mode, so that the ready led is flashing red/green and then use one of the tools
May 02 20:41:40 <caplink811> http://www.nslu2-linux.org/wiki/HowTo/UseTheResetButtonToEnterUpgradeMode
May 02 20:41:49 <Reedy_Boy> thats what i meant
May 02 20:42:06 <caplink811> use the force, aeh the wiki and the howto's and the faq, luke
May 02 20:42:20 <lukketto> I did not understand: I push the reset button and power on the nslu2 but I have not any red/green flashing! :(
May 02 20:43:44 <caplink811> push, and hold the button down, power on, and wait, until the ready led became red, then release the reset button, immediatly 
May 02 20:43:46 <joga> aren't you supposed to keep it pressed for a good while
May 02 20:44:22 <lukketto> Have I to hold the reset button till what?
May 02 20:44:36 <joga> until the led goes red :)
May 02 20:44:44 <caplink811> thx, joga 
May 02 20:45:29 <caplink811> as described in the link, i mentioned above
May 02 20:54:36 <lukketto> IT WORKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
May 02 20:54:43 <lukketto> thank you guys!!!!!!!!!!!!!!!!!!!!!!!!
May 02 20:54:45 <lukketto> ;)
May 02 20:54:51 <lukketto> I'm very happy!
May 02 20:55:00 <lukketto> thanks from Italy!
May 02 20:55:53 <lukketto> Thank caplink, Ready_boy and everybody!
May 02 20:58:44 <Reedy_Boy> no probs
May 02 21:00:39 <Reedy_Boy> why doesn't my newly unslung slug show the slug logo in the top right?
May 02 21:01:21 <Reedy_Boy> i remember my other took a little while
May 02 21:01:41 <Reedy_Boy> ill have to ask tommorow
May 03 00:22:32 <Kitsch> hello
May 03 00:26:11 <Kitsch> hello
May 03 08:07:54 <Prometeo> hi
May 03 08:15:12 <drif> hi prom
May 03 08:29:27 <Prometeo> how are you ?
May 03 09:39:37 <Prometeo> hi
May 03 09:39:59 <Prometeo> anybody has played with the leds of the slug ?
May 03 09:55:17 <pahartik> Prometeo: I figured out how to use "leds" by trial and error method some days ago
**** ENDING LOGGING AT Wed May 03 09:59:56 2006