**** BEGIN LOGGING AT Thu Jan 11 02:59:58 2007 Jan 11 04:55:22 hi Jan 11 04:55:47 i have troubles booting my flashed (and reflashed) nslu2 Jan 11 04:56:38 i went through several flashing cycles because i had freeze problems with the debian installer, initially... then tried the openslug (which worked and i got a shell), but then I must have broken something because now i can't ping or reach it in any way Jan 11 04:56:57 i tried reseting the sysconf... i still have access to the redboot on boot... Jan 11 04:57:18 nothing will do... Jan 11 04:57:53 i tried images from slug-firmware.net Jan 11 05:00:05 right now, the slug is sitting here doing nothing with the Read/Status light off (and ethernet on) Jan 11 05:00:10 well, flashing on... Jan 11 05:00:47 it doesn't beep after/while booting Jan 11 05:02:03 i just tried flashing with unslug after reseting the conf, no go Jan 11 05:06:45 my current theory is that i hosed a filesystem on a flash somewhere and that it's getting stuck in some runlevel Jan 11 05:08:15 ok, now it beeped once Jan 11 05:08:49 status light cycling: oooooooff, green, amber, red Jan 11 05:09:06 not sure about green, slipping by fast :) Jan 11 05:16:01 cool, got openslug up!!! Jan 11 05:16:08 wow, that was unexpected :P Jan 11 05:26:42 turnup init; turnup preserve; shutdown -r now Jan 11 08:34:30 anyone have problems with the debian-etch-rc1-20061102.zip firmware where a flash just doesn't give you a ssh terminal after reboot? Jan 11 11:33:01 someone here? Jan 11 11:33:41 Ok, for the Log: Jan 11 11:35:18 Is there a way to backup the flash after installing etch-rc1? I want to clone a system! Jan 11 11:35:37 * derwolf is waiting for response! Jan 11 12:52:02 derwolf: did you get an answer yet? Jan 11 14:01:39 @jelle: no, not yet! Found CompletelyBackupTheNSLU2 but that does not answer the clonig-task! Jan 11 14:04:11 no. I'm not sure how you'd do it. I keep track of what I install (writing down all steps, almost into a script) and could reinstall/retrace steps/clone that way. even though it might not be what you want, it is quite successful and handy at times. Jan 11 14:04:37 I for example had my dns on one slug, but wanted it on another slug. the steps were all in my scribbles Jan 11 14:05:35 it also helps others, when someone asks me: how to install this or that, I can just mail my commented install script Jan 11 15:31:52 * jamieg is in "Camp #3" from OpenSlug-3.10-beta-README.txt Jan 11 15:42:41 I updated my NSLU2 with openslug-3.10-beta.bin via upslug2, that went just fine. Jan 11 15:44:16 wasn;t there a torrent client where you could just drop a .torrent file in a directory and it would start downloading after a while? Jan 11 15:46:27 I need to make a small kernel tweak. 2.6.16 is just fine. So I did "make slugos-bag-kernel", prepped and installed it in /dev/mtdblock2, and it boots up Ok... Jan 11 15:47:28 ... except for the bloody binary ixp400 net driver. Jan 11 15:48:04 Is there a GPL driver that doesn't require updating to 2.6.20-rc3, or converting to Debian? Jan 11 16:33:33 * jamieg is trying "make openslug-image" to build HEAD... Jan 11 17:16:27 hello all - is there any way/command/logs i can view to see why my Slug keeps crashing? Jan 11 17:18:28 All lights are on - but wont respond to anything -not even ping Jan 11 17:29:01 anyone? Jan 11 17:29:10 i think it may be a case of memory used up? Jan 11 17:29:13 from logs? Jan 11 18:47:18 all - how can i check memory usage on my slug and what should it be at? Jan 11 18:51:32 m1ch: free or top Jan 11 18:54:09 it says roughly 800 Jan 11 18:54:20 everytime i type free it goes down Jan 11 18:54:27 seems to stay aorund 800 though Jan 11 18:54:35 started at 1200 when i rebooted 5 minutes ago Jan 11 18:54:51 is that bad news? Jan 11 18:59:13 ? Jan 11 19:02:49 top Jan 11 19:03:01 and press m? Jan 11 19:03:36 anyone alive who has de-clocked their slug? Jan 11 19:03:49 Mem: 30524 29752 772 0 12752 Jan 11 19:03:55 mine too Jan 11 19:04:03 Mem: 30300k total, 29228k used, 1072k free, 3520k buffers Jan 11 19:04:03 Swap: 72284k total, 13744k used, 58540k free, 10772k cached Jan 11 19:04:15 so mine is not overly low then? Jan 11 19:04:21 doesnt look like it! Jan 11 19:04:26 clocked yours? Jan 11 19:04:35 just it has locked up twice this week after about 2 days of use each time Jan 11 19:04:40 can't work out why Jan 11 19:05:06 i thought maybe too many logs getting written to my /var/log - so i've changed to opt/var/log but no difference Jan 11 19:05:14 no - not overclocked (yet!) Jan 11 19:06:02 i'll asl on here tomorrow i think - night for now Jan 11 19:06:05 ask# Jan 11 19:10:14 hi, I've quite recently bought a FSG and now I want to use it (Well I had to start somehow :-P) but I'm not very succesful in my atempts. What I'm currently concerned with is getting printing to work, so any handholders around? Jan 11 19:19:18 opensssl can't create a certificate for cups, doesn't find 'distinguished_name', ? Jan 12 00:36:37 hello... Jan 12 00:37:01 anyone who knows what to do about usb bandwidth allocation problems? Jan 12 00:37:30 happens if I plug in a usb hub and several devices in it... Jan 12 01:13:03 in case anyone was wondering, yes, turnup memstick, turnup nfs and turnup disk all work on openslug :) Jan 12 01:58:07 hallo, Jan 12 02:01:03 got a problem I didn't find a solution for.. maybe someone has an idea.. Jan 12 02:02:21 I'm trying to setup dokuwiki on an unslung 6.8 nslu2. I needed to install php (and it's dependencies) and php-thttpd as php aware (?) webserver. Jan 12 02:03:05 when trying to start php and/or thttpd I get: Jan 12 02:03:18 Starting thttpd... Inconsistency detected by ld.so: dynamic-link.h: 62: elf_get_dynamic_info: Assertion `! "bad dynamic tag"' failed! Jan 12 02:03:18 done Jan 12 02:18:31 I'll check later **** ENDING LOGGING AT Fri Jan 12 02:59:57 2007