**** BEGIN LOGGING AT Sat Apr 07 02:59:57 2007 Apr 07 03:22:44 I have a unslug 6 using a 2GB flash drive. I notice that it takes much longer to boot compare to when I used unslug 5 on a hdd. Apr 07 03:23:20 psulug Apr 07 04:37:31 hello all :) Apr 07 04:51:07 what do you mean Dandan by "1000Hz ticks" ? Apr 07 14:59:50 Hi all. Apr 07 17:56:43 how do I make slugos probe the connected usb devices at startup ? Apr 07 17:57:08 so I don't have to disconnect and reconnect my usb device in order to have it beeing found Apr 07 17:59:22 (unplug and replug) Apr 07 17:59:22 fendor: add your module to /etc/modutils/, then update-modules Apr 07 17:59:38 okay Apr 07 18:00:59 so I ln -s it into ? Apr 07 18:04:44 should I make a symbolic link to the modules I need loaded ? Apr 07 18:06:48 hmm that don't work Apr 07 18:10:52 hmm It might be a little harder than just adding it here Apr 07 18:11:03 you see It's a soundcard Apr 07 18:11:40 and when it is connected there are a udev rule that load a firmware onto the soundcard Apr 07 18:12:07 so I guess I have to activate the udev at boot time ? Apr 07 18:29:25 oh hehe Apr 07 18:30:00 I feel a little dumb, of/c I simply make a init script that calls the command that the udev rule calls :) Apr 07 18:30:32 except.. it's kinda ugly... Apr 07 18:51:04 Its a little confusing when moving between different distros Apr 07 19:33:48 Hi a friend of mine wants to know if anyone has got nslu2 to work with a WD my book world 1tb edition Apr 07 19:57:02 Hi all, had a query. I can connect to my NSLU (running Unslung, Open SSH & FTP server enabled) by entering ... ftp my.internet.ip into command prompt from a computer not on my network. But I canot connect to it from an FTP client or using a browser. Any ideas? Apr 07 20:20:00 tyrhinis: you mean cannot connect locally? Apr 07 20:20:20 I can connect locally Apr 07 20:20:36 and when I type ftp.my internet ip in command prompt Apr 07 20:20:37 i can connect Apr 07 20:20:46 i just cant connect with an ftp client or net browser Apr 07 20:22:00 ok, example. in command prompt, i can connect remotely using ftp my ip Apr 07 20:22:06 router forwards the ports Apr 07 20:22:18 but, cant use an ftp client or browser Apr 07 20:23:08 you can see my ip so i may aswell give it out lol. its 217.44.138.81 Apr 07 20:23:24 ftp 217.44.138.81 works in command prompt Apr 07 20:23:32 ftp://217.44.138.81 in a browser doesnt Apr 07 20:23:38 Get someone else to try it Apr 07 20:23:40 which ftp client you're trying? Apr 07 20:23:44 your router may not have nat Loopback Apr 07 20:23:57 so you cant use your external ip Apr 07 20:24:06 have done Apr 07 20:24:10 I just tired it Apr 07 20:24:13 it will load for me Apr 07 20:24:20 i figured the nat loopback mate Apr 07 20:24:24 tried someone else Apr 07 20:24:30 it works for me Apr 07 20:24:32 and, tried using a proxy Apr 07 20:24:38 WinSock 2.0 -- OpenSSL 0.9.8d 28 Sep 2006 Apr 07 20:24:38 [R] Connecting to 217.44.138.81 -> IP=217.44.138.81 PORT=21 Apr 07 20:24:38 [R] Connected to 217.44.138.81 Apr 07 20:24:38 [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:24:38 [R] USER anonymous Apr 07 20:24:41 [R] 331 Password please. Apr 07 20:24:42 i tried using leech ftp Apr 07 20:24:43 [R] PASS (hidden) Apr 07 20:24:45 [R] 421 Login incorrect. Apr 07 20:24:47 [R] Connection failed Apr 07 20:24:49 [R] Delaying for 120 seconds before reconnect attempt #1 Apr 07 20:24:50 and browser works also Apr 07 20:24:52 the ftp? Apr 07 20:24:54 yup Apr 07 20:24:58 did it ask for a pass? Apr 07 20:24:59 my ftp log as above Apr 07 20:25:02 yup Apr 07 20:25:08 in an ftp client? Apr 07 20:25:16 yup Apr 07 20:25:19 thats in FlashFXP Apr 07 20:25:22 "421 Login incorrect" stated my firefox Apr 07 20:25:31 so works ok Apr 07 20:25:31 if you have a test username/pass, i'll upload a text file to prove Apr 07 20:25:32 yeah Apr 07 20:25:42 everyone gets that 421 error Apr 07 20:25:55 have you got anon login enabled? Apr 07 20:26:08 how do i correct for that 421 error. it gives that error before it even asks for pass Apr 07 20:26:20 tyrhinis: are you typing that ftp-command and using the ftp-client on the same machine? Apr 07 20:26:50 because I'm not making much sense what you just described as your situation Apr 07 20:26:52 tess username = simon, pass = heed Apr 07 20:26:58 no Apr 07 20:27:04 no anon login Apr 07 20:27:26 no, different machines. Apr 07 20:27:29 tyrh: to who you are answering? Apr 07 20:27:40 everyone gets the 421 error in firefox and ie Apr 07 20:27:52 which is where i need it to work unfortunately Apr 07 20:28:00 ok Apr 07 20:28:10 when one tries to ftp in in firefox or ie Apr 07 20:28:16 they get a 421 error Apr 07 20:28:32 it doesnt display an enter username/pass box and then give access Apr 07 20:28:37 WinSock 2.0 -- OpenSSL 0.9.8d 28 Sep 2006 Apr 07 20:28:38 [R] Connecting to 217.44.138.81 -> IP=217.44.138.81 PORT=21 Apr 07 20:28:38 [R] Connected to 217.44.138.81 Apr 07 20:28:38 [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:28:38 [R] USER anonymous Apr 07 20:28:38 [R] 331 Password please. Apr 07 20:28:40 [R] PASS (hidden) Apr 07 20:28:44 [R] 421 Login incorrect. Apr 07 20:28:46 [R] Connection failed Apr 07 20:28:48 [R] Delaying for 120 seconds before reconnect attempt #1 Apr 07 20:28:48 you drif mate Apr 07 20:28:50 [R] Connecting to 217.44.138.81 -> IP=217.44.138.81 PORT=21 (attempt # 1) Apr 07 20:28:52 [R] Connected to 217.44.138.81 Apr 07 20:28:54 [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:28:56 [R] USER anonymous Apr 07 20:28:58 [R] 331 Password please. Apr 07 20:29:00 [R] PASS (hidden) Apr 07 20:29:02 [R] 421 Login incorrect. Apr 07 20:29:04 [R] Connection failed Apr 07 20:29:06 [R] Delaying for 120 seconds before reconnect attempt #2 Apr 07 20:29:08 [R] Retry attempt Aborted Apr 07 20:29:10 [R] Connecting to 217.44.138.81 -> IP=217.44.138.81 PORT=21 Apr 07 20:29:14 [R] Connected to 217.44.138.81 Apr 07 20:29:17 [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:29:19 [R] USER anonymous Apr 07 20:29:20 [R] 331 Password please. Apr 07 20:29:22 [R] PASS (hidden) Apr 07 20:29:24 [R] 421 Login incorrect. Apr 07 20:29:26 [R] Connection failed Apr 07 20:29:28 thyr: so, you are able to connect to your ftp from wan, but not lan? Apr 07 20:29:28 [R] Delaying for 120 seconds before reconnect attempt #1 Apr 07 20:29:30 [R] Retry attempt Aborted Apr 07 20:29:32 [R] Connecting to 217.44.138.81 -> IP=217.44.138.81 PORT=21 Apr 07 20:29:34 [R] Connected to 217.44.138.81 Apr 07 20:29:36 [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:29:38 [R] USER simon Apr 07 20:29:40 any luck with the test username/pass Reedy_Boy? Apr 07 20:29:40 [R] 331 Password please. Apr 07 20:29:44 [R] PASS (hidden) Apr 07 20:29:46 [R] 230 User logged in. Apr 07 20:29:48 [R] SYST Apr 07 20:29:50 [R] 215 UNIX Type: L8 Apr 07 20:29:52 [R] FEAT Apr 07 20:29:54 [R] 211-Extensions supported: Apr 07 20:29:56 [R] XPWD Apr 07 20:29:58 [R] EPRT Apr 07 20:29:59 reedy: couldn't you use pastebin or similar? Apr 07 20:30:00 [R] EPSV Apr 07 20:30:02 that's plain aanoying Apr 07 20:30:02 [R] ALLO Apr 07 20:30:04 [R] APPE Apr 07 20:30:06 [R] MDTM Apr 07 20:30:08 yep Apr 07 20:30:08 [R] XCWD Apr 07 20:30:10 [R] XCUP Apr 07 20:30:14 [R] XMKD Apr 07 20:30:16 [R] XRMD Apr 07 20:30:18 [R] REST Apr 07 20:30:20 [R] SIZE Apr 07 20:30:22 [R] 211 End Apr 07 20:30:23 tyrhinis: why not use the local ip then? Apr 07 20:30:24 [R] PWD Apr 07 20:30:26 [R] 257 "/" is the current working directory. Apr 07 20:30:28 [R] TYPE A Apr 07 20:30:30 [R] 200 Transfer type changed to ASCII Apr 07 20:30:32 [R] PASV Apr 07 20:30:33 damn you reedy Apr 07 20:30:34 [R] 227 Entering Passive Mode (217,44,138,81,4,104) Apr 07 20:30:36 [R] Opening data connection IP: 217.44.138.81 PORT: 1128 Apr 07 20:30:38 [R] LIST -al Apr 07 20:30:40 [R] 150 Data connection established. Apr 07 20:30:44 [R] 226 Directory list has been submitted. Apr 07 20:30:46 [R] List Complete: 60 bytes in 0.61 seconds (0.1 KB/s) Apr 07 20:30:48 Oops, bit much Apr 07 20:30:50 yup Apr 07 20:30:52 yeah Apr 07 20:30:52 As that spam above Apr 07 20:30:54 I didnt realise there was so much Apr 07 20:30:56 sorry, it was an accident Apr 07 20:30:58 look in the guest folder, test.txt Apr 07 20:31:00 use pastebin next time? Apr 07 20:31:08 im not sure what wan is, i can connect via ssh, scp, ftp from lan Apr 07 20:31:09 yeah =) Apr 07 20:31:16 cant from the internet, unless im in command prompt Apr 07 20:31:19 WAN = wide area network Apr 07 20:32:00 i see the uploaded text file Apr 07 20:32:01 yes, in this case internet Apr 07 20:32:14 that proves it works =) Apr 07 20:32:17 tyrh: your server works ok when using simon@ip Apr 07 20:32:24 I'm logged in via mozilla Apr 07 20:32:34 i see test Apr 07 20:32:38 yeah, you may just have to do that in the web browser to force a username for auth Apr 07 20:32:46 did you upload that from internet explorer or firefox? Apr 07 20:32:56 ah kk Apr 07 20:33:08 tyrh: so to make this simple.. I believe your server resides behind nat? so when operating within local network, use local ip addresses Apr 07 20:33:10 people can ftp in from wan in command prompt Apr 07 20:33:16 not from ie or firefox Apr 07 20:33:25 my IE just let me in Apr 07 20:33:26 or an ftp client like leech Apr 07 20:33:28 ftp://ipaddress Apr 07 20:33:33 pop up box, simon, heed Apr 07 20:33:34 logon Apr 07 20:33:49 reedy: mozilla required username first Apr 07 20:33:55 as @ Apr 07 20:33:56 just created IE TEST FOLDER Apr 07 20:33:58 yep. people can access from the internet in command prompt, not from a client Apr 07 20:34:14 tyrh: are you listening to me? Apr 07 20:34:16 what did you type in mozilla mate Apr 07 20:34:18 lool Apr 07 20:34:25 ftp://simon@ipaddress Apr 07 20:34:56 ftp://simon@217... Apr 07 20:35:00 tyrh: did you get what I said about which ip's to use? Apr 07 20:35:06 yep Apr 07 20:35:13 so wouldn't that solve it? Apr 07 20:35:37 well, there's always that solution.. Apr 07 20:35:52 re Apr 07 20:36:01 how did i not get kicked for excess flood? :/ Apr 07 20:36:20 sorry, d/c Apr 07 20:36:34 remotely, use 217.. Apr 07 20:36:38 reedy: sheer luck? Apr 07 20:37:07 lol Apr 07 20:37:10 tyrh: and locally, if you're using default ip - it's 192.168.1.77 Apr 07 20:37:44 Reedy_Boy> [R] 220 FTP server at 192.168.1.3 ready. Apr 07 20:37:44 yep Apr 07 20:37:54 came up, its on 192.168.1.3 ? Apr 07 20:38:25 seems so Apr 07 20:38:28 yep sure is Apr 07 20:38:36 auto assigned dchp Apr 07 20:38:46 for server? Apr 07 20:39:19 I'd prefer static, constantly moving server's are a bitch Apr 07 20:39:26 -' Apr 07 20:39:41 yaa, unless the DHCP (router) or whatever sets that assignment to that device Apr 07 20:39:48 unless it's of course tied to MAC address Apr 07 20:49:12 thanks guys, all is tested and well Apr 07 20:49:20 good Apr 07 20:51:27 :) Apr 07 20:51:33 just out of interest, which OS/ftp? Apr 07 20:51:39 on the slug Apr 07 20:54:22 reedy: he said unslung Apr 07 20:55:35 so he did! Apr 07 21:08:28 ronni: ping Apr 07 21:34:19 kapookee Apr 07 21:34:40 I was ronni a couple of days ago Apr 07 21:35:46 Ah! You morphed. :-) Apr 07 21:36:24 yeah Apr 07 21:36:26 :) Apr 07 21:36:28 always Apr 07 21:36:44 maybe this will make you feel better Apr 07 21:37:00 just like when aliens morph into human form so that not to scare them Apr 07 21:37:43 WinTV PVR - I just got one. Was just wondering what firmware you are using on your slug that you got the WinTV working on. Apr 07 21:38:07 oh cool, yeah, I'm using Debian Etch RC2 Apr 07 21:38:09 just a sec Apr 07 21:38:18 I'll get you a link to the site that explains how to install it Apr 07 21:39:45 You gave me a link to the driver the other day. Got that. Apr 07 21:40:25 http://www.cyrius.com/debian/nslu2/install.html Apr 07 21:40:57 this guide will show you how to replace the linksys firmware with Debian Etch Apr 07 21:41:17 which you can get from www.slug-firmware.net Apr 07 21:42:15 ok. I have one slug running Debian Etch and another one running SlugosLE. Was just wondering which one you had success with. Apr 07 21:42:28 ahhh ok Apr 07 21:43:16 I got the driver build under both (slugos was a tad more difficult, but successful). Now I just need to figure out which one to actually use. :-) Apr 07 21:44:15 hehehe.. choices choices choices Apr 07 21:45:20 just discovered this: http://www.aurel32.net/info/debian_arm_qemu.php.en once can emulate the debian etch for ARM environment on a normal computer and would be able to compile debian ARM apps for the NSLU2 much much faster than one could with the NSLU2 itself Apr 07 21:49:37 I usually prefer slugos. I've reinstalled it so many times I could practically do it in my sleep. Knowing that you have WinTV-PVR working on DebianSlug gives me something to fall back on in case I can't get it to work. :-) Apr 07 21:49:54 right on Apr 07 21:50:01 Thanks for the info. Apr 07 21:50:31 bbiab Apr 07 21:50:42 hey np, if you have any problems, just scream for ronni Apr 07 22:20:09 Of course. RTFW (read the FINE wiki) offers help as well. Grrr...when will I learn?! Apr 07 22:23:43 I've recently been playing with /proc/sys/vm/* attributes Apr 07 22:23:57 yesterday I set swappiness factor to 5 and 10 Apr 07 22:24:09 my hard drive thrashed significantly less Apr 07 22:25:04 today, the dreaded OOM killer started killing random processes Apr 07 22:25:16 because I was running 'out of memory' Apr 07 22:25:33 had to set swappiness back to the default value, 60 Apr 07 22:25:42 :/ Apr 08 01:00:16 ronni: ping Apr 08 01:04:33 yup Apr 08 01:04:59 im here Apr 08 01:05:04 kapokee: ping Apr 08 01:05:31 What client(s) do you use to view the stream from the PVR? Apr 08 01:06:17 I view the streams in Windows Apr 08 01:06:39 using either Media Play Classic (open source app) or VLC Apr 08 01:06:40 Hmmm, okay. Apr 08 01:07:07 i'm using VLC on the NSLU2 to stream Apr 08 01:07:14 let me get you the exact command I use Apr 08 01:07:19 tnkx Apr 08 01:07:40 vlc pvr:/dev/video0 --sout http/ps::5050 --daemon Apr 08 01:07:58 and in the client, just open the stream http://192.168.1.77:5050 Apr 08 01:08:06 I dropped slugos for now. Getting it running on Debianslug was a snap. Apr 08 01:08:15 okay - will try Apr 08 01:08:28 excellent, tell me if it works :) Apr 08 01:31:07 Wel, I got audio! :-) no video though. Will keep playing with it.... Apr 08 01:41:06 no video Apr 08 01:41:08 hmmm... Apr 08 01:41:33 are you able to view normal video clips if you perform cat /dev/video0 > cool.mpg? Apr 08 01:49:47 No.. I get cat: /dev/video0: Device or resource busy Apr 08 02:00:05 oh Apr 08 02:00:21 is the red light on? Apr 08 02:00:27 on the WinTV PVR device? Apr 08 02:00:51 or maybe vlc is using /dev/video0 Apr 08 02:01:14 yes, the light is on. Apr 08 02:01:21 is vlc running? Apr 08 02:03:28 Too tired to continue.. Will play with this tomorrow.. Thanks for your help so far. Apr 08 02:04:57 np **** ENDING LOGGING AT Sun Apr 08 02:59:57 2007