**** BEGIN LOGGING AT Sat Jun 23 02:59:57 2007 Jun 23 12:30:14 I have searched the wiki, and several other web sites, and cannot find out why my nslu2 does not see the 2gig usb stick or the hard drive I have mounted to it. Jun 23 12:30:38 I installed Openwrt kamikaze on it. Jun 23 12:30:42 7.06 Jun 23 12:31:12 I can upload packages, and did the suggested kmods for mounting vfat for the stick. Jun 23 12:31:39 Is there a web site or a document you could point me to? Jun 23 12:31:49 this is unslung? Jun 23 12:32:08 I gather. Jun 23 12:32:23 I flashed the firmware, if that's what you're asking. Jun 23 12:32:44 there is a list of peoples experiences with different hardrive vendors on the yahoo group Jun 23 12:32:58 i couldnt get unslung to work with my freecom hd, but debianslug did Jun 23 12:34:21 I am not sure if I have things set up properly, though, as this is my first nslu2 firmware flash. Jun 23 12:35:07 I couldn't find a FAQ that showed a path for troubleshooting them. Jun 23 12:36:15 im not sure about your experiences. i followed the wiki for install of unslung, it never quite flipped over to running unslung when i started my slug - it was put down to some timing issue. i installed debian and everything is sweet Jun 23 12:37:34 I initially intended to use the debian install, but I've used openwrt before, so I went with the devil I knew; I'll try flashing it with the debian firmware. Jun 23 12:38:16 One more question, though; can you explain the difference in the two firmwares, BE and LE? Jun 23 12:49:32 http://www.nslu2-linux.org/wiki/FAQ/FirmwareMatrix Jun 23 12:49:54 Thank you! Jun 23 12:52:21 hi Jun 23 12:52:46 When I upgrade flash, using upslug2 Jun 23 12:52:55 I have a verification error Jun 23 12:53:14 broadcast: flash verification error (address 0x60000, length 1472) [N12NSLU2Upgrade10FlashErrorE] Jun 23 12:53:23 It's kernel address Jun 23 12:53:47 maybe, somebody knows how to fix it? Jun 23 13:22:07 here am I again Jun 23 13:23:14 if there is a problem with correct kernel flashing Jun 23 13:23:45 that's a poor situation Jun 23 18:28:35 hello everyone and good morning to some of you! Jun 23 18:34:10 hallo, hallo, hallo.... (doing the moto ring tone) Jun 23 18:44:17 . Jun 23 18:45:12 . Jun 23 18:45:35 .. Jun 23 22:36:39 Does any1 know how to determine what speed the nslu2 is running on stock Linksys firmware? Jun 23 22:37:01 I'm referring to the processor speed, 133MHz or 266MHz Jun 23 22:38:44 cat /proc/cpuinfo Jun 23 22:38:48 Look at "bogomips" Jun 23 22:39:16 leesiulung, running cat /proc/cpuinfo should give you the info Jun 23 22:43:15 Unfortunately, you can only do the above with stock Linksys firmware if you have a serial port soldered on... Jun 23 22:44:19 mwester, really? :-o Jun 23 22:44:29 Ofc Jun 23 22:44:40 I was thinking "unslung" as the "stock". Jun 23 22:44:40 lol Jun 23 22:45:09 oops Jun 23 22:45:12 missed that too Jun 23 22:45:56 Hmm, well, leesiulung, I think more recent NSLU2's have the restriction removed, but I'm not sure if we know when abouts in production this was changed. Jun 23 22:45:58 soo, no way to know... Jun 23 22:46:11 I'm trying to upgrade my software with ipkg and get this error Jun 23 22:46:19 is there a way to know when a slug was manufactured based on serial number or marking on the unit? Jun 23 22:46:19 ERROR: The following packages conflict with findutils: Jun 23 22:46:20 busybox-links Jun 23 22:46:20 I would think that if it was manufactured in the last year or so, you should have a 266 one. Jun 23 22:46:24 anyone have an idea for that? Jun 23 22:46:29 (but don't quote me on that) Jun 23 22:46:31 also the top command doesnt appear available Jun 23 22:47:14 wizdumb, I thyink for top you have to install a package, can't rememner the name, something like process-utils or cpu-utils? Jun 23 22:49:32 procps Jun 23 22:49:52 that conflicts with busybox-links :( Jun 23 22:50:10 can I just uninstall busybox or is that the root system for unslung? Jun 23 23:15:25 wizdumb, try ipkg install --force-overwrite blapackage Jun 23 23:16:08 or try ipkg remove busybox-links, but then you may miss some functions Jun 23 23:16:27 tried both of those Jun 23 23:16:28 no go Jun 23 23:16:51 -bash-3.2# ipkg install --force-overwrite procps Jun 23 23:16:51 Installing procps (3.2.7-4) to root... Jun 23 23:16:51 Nothing to be done Jun 23 23:16:51 An error ocurred, return value: 1. Jun 23 23:16:51 Collected errors: Jun 23 23:16:52 ERROR: The following packages conflict with procps: Jun 23 23:16:54 busybox-links Jun 23 23:22:13 wizdumb, http://phpfi.com/244229 Jun 23 23:24:25 yeah so I did that only I get command not found for top --version Jun 23 23:24:46 well, maybe that this is $PATH problem Jun 23 23:25:06 /opt/sbin:/opt/bin:/usr/sbin:/usr/bin:/sbin:/bin Jun 23 23:25:09 did you try /opt/bin/top ? Jun 23 23:25:26 -bash: /opt/bin/top: No such file or directory Jun 23 23:26:16 but ipkg --force-overwrite --force-depends install procps worked without any errors? Jun 23 23:27:31 lets see I dont htink I had force-depends Jun 23 23:30:11 ah yes, that did hte trick Jun 23 23:30:14 thanks caplink811-log Jun 23 23:30:44 np Jun 23 23:31:08 now I just have to figure out why this thing keeps locking up on me Jun 23 23:31:17 have a feeling its related to mt-daapd Jun 23 23:31:19 ? Jun 23 23:31:31 ever since i installed that it seems to lock up after so much time goes by Jun 23 23:32:02 not sure what happens, but cant ssh to it, cant get to the webui, or mount it on smb Jun 23 23:32:18 anything in the logfiles? Jun 23 23:32:35 in dmesg or others? Jun 23 23:33:26 hmm there is some stuff in samba Jun 23 23:33:32 looks minor though Jun 23 23:33:46 [2007/06/23 15:10:47, 1] smbd/service.c:make_connection_snum(645) Jun 23 23:33:46 192.168.1.102 (192.168.1.102) connect to service HDD_1_1_1 initially as user guest (uid=501, gid=501) (pid 552) Jun 23 23:33:46 [2007/06/23 15:25:21, 0] lib/sysquotas.c:sys_get_quota(386) Jun 23 23:33:46 sys_path_to_bdev() failed for path [.]! Jun 23 23:34:33 then some stuff in server.log Jun 23 23:34:42 4 02/22 17:03:04 QuickSet started up. Jun 23 23:34:42 5 02/22 17:02:45 Input Empty server comment Jun 23 23:34:42 5 02/22 17:02:45 Input Empty WINS server, disable it Jun 23 23:36:35 assuming, that the slug is running out of memory/swap, there should be some hints about try to kill process bla in log/messages or log/syslog (don't know where your logger place his messages) Jun 23 23:37:00 could be /var/log or /opt/var/log Jun 23 23:38:52 grep didnt find anything with kill in it Jun 23 23:40:24 grep is a nice tool, but sometimes it may be useful to read the syslogs line by line.. Jun 23 23:42:15 to get more hints you could run free > /tmp/bla each minute Jun 23 23:43:50 hmm Jun 23 23:43:53 looking at it now Jun 23 23:43:58 not sure how much should be free Jun 23 23:44:04 but looks a bit full Jun 23 23:44:18 in the middle of copying files though too so I'll let that finish first and check again Jun 23 23:45:35 be aware, this isn't a win system, so linux systems uses the whole free memory, have an eye on the free swap Jun 23 23:46:18 swap seems pretty open it seems **** ENDING LOGGING AT Sun Jun 24 02:59:58 2007