**** BEGIN LOGGING AT Sun May 11 02:59:56 2008
May 11 08:04:48 <Nightwolf> HardDisk_WP: sorry hab schon geschlafen, hab aber auch keine antwort auf deine frage
May 11 08:40:16 <DocMAX> hello?
May 11 08:50:32 <janne-5011> hello DocMAX
May 11 08:50:46 <janne-5011> just ask if you need to
May 11 08:57:50 <HardDisk_WP> hi all
May 11 08:57:53 <HardDisk_WP> anyone?
May 11 08:57:55 <HardDisk_WP> i have wrecked my flash by installing broken selfmade .25 kernel
May 11 08:58:01 <HardDisk_WP> how do i reflash the old .18 vmlinuz/ramdisk?
May 11 08:58:20 <HardDisk_WP> the vmlinuz is 1.2MB so upslug refuses it :/
May 11 09:22:40 <DocMAX> how can i setup nslu2 to automount an usb drive if it connected?
May 11 09:27:39 <DocMAX> ?
May 11 09:28:42 <HardDisk_WP> via udev scripting
May 11 10:47:56 <HardDisk_WP> hi all
May 11 10:48:14 <HardDisk_WP> i manually reflashed the mtdblock3-5 of Nightwolfs debian install
May 11 10:48:22 <HardDisk_WP> now the slug hangs
May 11 10:48:29 <HardDisk_WP> ready/status is orange, ethernet green
May 11 10:48:33 <HardDisk_WP> disk1/2 off
May 11 10:48:35 <treitmayr> do you have a serial cable?
May 11 10:48:40 <HardDisk_WP> whats up there?
May 11 10:48:44 <HardDisk_WP> treitmayr, USB to serial
May 11 10:48:53 <HardDisk_WP> i dont wanna void the warranty^^
May 11 10:49:01 <treitmayr> ah, ok
May 11 10:50:14 <HardDisk_WP> treitmayr, well, i can reflash the linksys image and it works again...
May 11 10:50:28 <HardDisk_WP> but what does the linksys image use me w/o debian?
May 11 10:50:42 <HardDisk_WP> and i dont really want to reinstall the whole debian
May 11 10:51:20 <HardDisk_WP> treitmayr, any idea if I can reflash the 3rd partition, "loader"?
May 11 10:51:35 <HardDisk_WP> and why can't I upload a kernel > 1MB with upslug2?!
May 11 10:51:45 <treitmayr> sorry, I always used upslug until now...
May 11 10:52:17 <HardDisk_WP> k
May 11 10:58:54 <Nightwolf> HardDisk_WP: you could copy your debian installation, reflash debian and restore all the things you need
May 11 11:01:48 <HardDisk_WP> Nightwolf, hmm...d-i has a shell...and i successfully mounted the usb stick via this shell
May 11 11:02:02 <HardDisk_WP> how do i now make the usb stick the / partition
May 11 11:02:08 <Nightwolf> d-i?
May 11 11:02:08 <HardDisk_WP> so that i then can run flash-kernel script?
May 11 11:02:12 <HardDisk_WP> debian installer
May 11 11:03:13 <Nightwolf> i don't know, via chroot?
May 11 11:03:53 <HardDisk_WP> hmm, sounds good
May 11 11:04:27 <HardDisk_WP> i try it out
May 11 11:04:46 <HardDisk_WP> because as it seems, if you flash kernel, you need to repartition MTD
May 11 11:23:13 <HardDisk_WP> Nightwolf, the chroot itself and the flashing worked, rebooting now
May 11 11:23:22 <Nightwolf> gz
May 11 11:25:15 <HardDisk_WP> Nightwolf, IT'S BACK!!!!!!!
May 11 11:25:19 <HardDisk_WP> thanks for the chroot hint
May 11 11:25:23 <Nightwolf> np
May 11 11:25:36 <HardDisk_WP> i think i'll post this to the wiki
May 11 11:32:09 <DocMAX> whats the latest karnel for nslu2?
May 11 11:32:13 <DocMAX> kernel
May 11 11:34:52 <HardDisk_WP> DocMAX, debian or other?
May 11 11:34:57 <HardDisk_WP> for debian, stay at 18
May 11 11:35:14 <treitmayr> for SlugOS it is 2.6.24
May 11 11:46:47 <edutek> hello?
May 11 11:47:20 <treitmayr> edutek: hi
May 11 11:48:44 <edutek> hello, i han=ve an NSLU2 unslung to latest vers on disk1 and all of a sudden after after reboot the unit is not seeing firmware on disk1. Any clues?
May 11 11:49:41 <edutek> NSLU2 Web GUI is showing unslung to internal and Disk 1 is showing unformatted
May 11 11:56:46 <edutek> anyone there?
May 11 11:57:47 <HardDisk_WP> no idea
May 11 11:58:06 <HardDisk_WP> i dont have any experience w/ unslung
May 11 11:58:31 <edutek> ok, thx. i am thinking flash card failed for some reason. Its just strange...
May 11 12:00:36 <edutek> should i try a different chat like #nslu2-linux?
May 11 12:00:55 <HardDisk_WP> no
May 11 12:01:00 <HardDisk_WP> this one is for developers
May 11 12:01:11 <HardDisk_WP> AFAIR there is a forum somewhere
May 11 12:01:36 <edutek> ok, thanks again
May 11 12:08:24 <DocMAX> hartdisk_mp: debian
May 11 12:13:55 <HardDisk_WP> DocMAX, you want to wait a week, then bugfixed .25 comes out
May 11 12:13:57 <HardDisk_WP> afk
May 11 13:18:26 <HardDisk_WP> hi all
May 11 13:18:31 <HardDisk_WP> somehow the beeper makes problems
May 11 13:18:35 <HardDisk_WP> on debian, kernel 2.6.18
May 11 13:18:54 <HardDisk_WP> i type "beep" and it sounds strange as usual
May 11 13:19:11 <HardDisk_WP> but when i run "beep -e /dev/input/event0", nothing happens
May 11 13:19:20 <HardDisk_WP> aah
May 11 13:19:25 <HardDisk_WP> it's event2 now
May 11 13:19:48 <HardDisk_WP> because the beeper gets initialized after the USB keyboard/mouse
May 11 14:57:42 * bizkut reboot jap
May 11 15:17:10 <skream> im about to unsling for the first time
May 11 15:17:10 <skream> yay
May 11 17:50:25 <cilugnedon> Hello. Anybody in here using debian on the nslu?
May 11 17:50:45 <tunk> yup
May 11 17:50:54 <cilugnedon> I've installed it yesterday and got some odd behavior I haven't found any description on the FAQ.
May 11 17:51:02 <cilugnedon> Hi tunk.
May 11 17:51:33 <cilugnedon> First, my ready lamp is flashing orange twice, pause, orange twice.
May 11 17:51:39 <cilugnedon> Is that odd?
May 11 17:51:44 <tunk> yup, its working
May 11 17:51:48 <tunk> that means its ready 
May 11 17:51:54 <tunk> the faster the 'heartbeat', the higher the load
May 11 17:51:55 <cilugnedon> Ok. Fine.
May 11 17:52:10 <cilugnedon> Heartbeat ;-)
May 11 17:52:10 <tunk> as long as you mean its normally green and going orange twice very rapidly.
May 11 17:52:37 <cilugnedon> The load is not very high.
May 11 17:52:43 <cilugnedon> Ok. Now to my real problem.
May 11 17:53:07 <cilugnedon> I installed mt-daapd svn 1696 from source. Do have experience with the firefly media server?
May 11 17:53:39 <tunk> i've absolutely no idea what you're on about
May 11 17:54:18 <cilugnedon> Ok, so you don't know firefly media server. It's a daap streaming server I use for streaming my music collection.
May 11 17:54:27 <HardDisk_WP> tunk, itunes streaming server
May 11 17:54:36 <tunk> ah right
May 11 17:54:38 <tunk> cheers
May 11 17:54:42 <cilugnedon> Not only for itunes.
May 11 17:55:38 <cilugnedon> I've installed the latest mt-daapd and start the streaming, but my soundbridge is keeping buffering all the time. Does anybody have an idea?
May 11 17:56:06 <cilugnedon> It happens with both, the binary debian package provided by the project, as well as with the fresh compiled sources.
May 11 17:56:52 <HardDisk_WP> check for other unneccessary stuff running
May 11 17:58:17 <cilugnedon> It's a fresh installed debian with only the necessary stuff for mt-daapd.
May 11 17:58:52 <HardDisk_WP> uhhh....
May 11 17:58:54 <HardDisk_WP> run htop
May 11 17:59:00 <HardDisk_WP> while you stream
May 11 17:59:43 <HardDisk_WP> afk
May 11 18:00:45 <cilugnedon> It's running the necessary stuff for streaming.
May 11 18:00:54 <cilugnedon> e.g. oggdec
May 11 18:01:07 <HardDisk_WP> what cpu usage/ram usage
May 11 18:01:07 <cilugnedon> It worked with unslung before pretty good.
May 11 18:01:35 <cilugnedon> Cpu(s):  3.9%us, 95.8%sy,  0.0%ni,  0.0%id,  0.0%wa,  0.0%hi,  0.3%si,  0.0%st
May 11 18:01:42 <HardDisk_WP> oO
May 11 18:01:49 <HardDisk_WP> sort by CPU usage
May 11 18:01:56 <HardDisk_WP> then tell me the top 3 processes
May 11 18:02:15 <cilugnedon> oggdec, top, sshd
May 11 18:02:43 <HardDisk_WP> oggdec...jeez...is your music in ogg format?!
May 11 18:02:57 <HardDisk_WP> it could be that the ogg decoder is too cpu intensive
May 11 18:03:17 <HardDisk_WP> renice -10 `pidof oggdec`
May 11 18:03:24 <HardDisk_WP> should solve it
May 11 18:03:25 <HardDisk_WP> afk
May 11 18:04:06 <cilugnedon> I tested with mp3. That works.
May 11 18:04:18 <cilugnedon> I feared it is the decoding of ogg.
May 11 18:05:55 <cilugnedon> Damn. It's oggdec.
May 11 18:05:57 <HardDisk_WP> it actually is
May 11 18:06:02 <cilugnedon> Renice doesn't work.
May 11 18:06:08 <HardDisk_WP> :(
May 11 18:06:11 <cilugnedon> I guess I need to go back to unslung.
May 11 18:06:17 <cilugnedon> That worked pretty well.
May 11 18:06:29 <cilugnedon> Wanted to have a nice debian on my nslu.
May 11 18:06:31 <cilugnedon> :-(
May 11 18:10:27 <cilugnedon> http://forums.fireflymediaserver.org/viewtopic.php?=&p=9670 says transcoding ogg should be fast enough on nslu2, although with a patch. I keep on searching ...
May 11 18:51:36 <skream> howdy.. i have a question about something thats probably pretty easy
May 11 18:52:18 <skream> how does one go about accessing disk drivs on port 1 if i've unslung to port 2?
May 11 21:58:07 <gouki> Has anyone configured the slug for wake on lan?
May 11 21:59:10 <HardDisk_WP> no
May 11 21:59:16 <HardDisk_WP> would be interesting, though
May 11 21:59:22 <HardDisk_WP> gouki, but for what is it needed?
May 11 21:59:30 <HardDisk_WP> the nslu doesnt consume much power
May 11 21:59:35 <gouki> I don't think the NIC supports it.
May 11 21:59:59 <gouki> at least ethtool is not allowing me to enable it.
May 11 22:05:21 <HardDisk_WP> no idea...
May 11 22:45:46 <mwester> gouki:  There is no hardware support for WOL.
May 11 22:46:05 <mwester> It can send the WOL packet to other devices, however...
May 12 00:35:46 <gouki> mwester: Thanks
**** ENDING LOGGING AT Mon May 12 02:59:57 2008