**** BEGIN LOGGING AT Sat Nov 28 02:59:56 2009
Nov 28 14:55:30 <ole> hi
Nov 28 14:59:02 <ole> i've changed the gateway of my NSLU2 with the Linksys Setup Program. after that the software is not able to find the NSLU anymore. should i have to reset the NSLU2?
Nov 28 15:22:18 <ole> i've changed the gateway of my NSLU2 with the Linksys Setup Program. after that the software is not able to find the NSLU anymore. should i have to reset the NSLU2?
Nov 28 15:59:30 <ole> i've changed the gateway of my NSLU2 with the Linksys Setup Program. after that the software is not able to find the NSLU anymore. should i have to reset the NSLU2?
Nov 28 16:00:44 <mwester> reboot it at least
Nov 28 16:07:14 <ole> i rebooted a few times already
Nov 28 16:08:24 <mwester> Sounds like you changed something other than the gateway as well.
Nov 28 16:08:32 <ole> ooh yeah
Nov 28 16:08:38 <ole> the IP 
Nov 28 16:09:09 <ole> from 192.168.1.77 to 192.168.1.102
Nov 28 16:09:27 <ole> im new to networking stuff
Nov 28 16:10:25 <mwester> So point your browser to the new IP you gave it, and all will be well -- if you did the network setup right.
Nov 28 16:11:29 <ole> i know the network setup fails
Nov 28 16:12:05 <ole> i can't reach the web interface
Nov 28 16:12:40 <ole> my PC is in the range of 192.168.0...
Nov 28 16:13:07 <ole> it should be in the same range like the NSLU, right? > 192.168.1
Nov 28 16:15:18 <mwester> There are many ways of solving the problem, but yes, either the PC and everything else in your network (such as your router) will need to move to 192.168.1.x or you will need to move the NSLU2 to 192.168.0.x
Nov 28 16:15:46 <mwester> It's probably easier to move the nslu2 to 192.168.0.x by setting up the network correctly.
Nov 28 16:16:24 <ole> ok fine
Nov 28 16:16:54 <mwester> Follow the Linksys instructions for resetting the device to the factory defaults, and try again.  This time you need to change the IP address to 192.168.0.xxx and set the DNS servers correctly and the gateway correctly.
Nov 28 16:17:49 <ole> in the manual is no point like "reset" :(
Nov 28 16:18:06 <mwester> Linksys has FAQ on their website
Nov 28 16:18:22 <ole> ok thank you for your help
Nov 28 16:18:38 <mwester> np good luck
Nov 28 16:41:05 <alexffm> hi, my debian install takes a while now (3 hours so far). syslog says its generating locales. how long should i wait?
Nov 28 16:43:45 <ole> the reset doesn't work on my NSLU2! i hold the button for about 30 seconds like they said in the linksys FAQ (beep after 10). what should i do? :(
**** ENDING LOGGING AT Sun Nov 29 02:59:57 2009