**** BEGIN LOGGING AT Tue Jul 19 02:59:56 2011
Jul 19 13:09:00 <frikandel> hello guys who can help me out
Jul 19 13:10:53 <frikandel> cannot optain ip adres of my nslu2 i bought it and it was flashed with openslug
Jul 19 14:21:33 <frikandel> need help guys i am stuck
Jul 19 14:21:50 <frikandel> dont know the ip adres of the nslu
Jul 19 14:21:58 <frikandel> its not 192.168.1.77
Jul 19 14:27:01 <oliwer> frikandel, is it connected to a DHCP server?
Jul 19 14:34:32 <frikandel> hey i am back
Jul 19 14:34:57 <frikandel> oliwer its on dhcp yes
Jul 19 14:35:18 <frikandel> i flashed original fw back but still no ip
Jul 19 14:38:38 <frikandel> failed to get samba information
Jul 19 14:39:52 <frikandel> error:fail to get samba information
Jul 19 14:43:14 <oliwer> frikandel, i think (not sure) that newer versions of openslug use dhcp by default, so try to guess the ip address according to your dhcp settings
Jul 19 14:43:46 <oliwer> also, samba won't be launched automatically on first boot
Jul 19 14:44:49 <frikandel> ok
Jul 19 14:44:54 <frikandel> but now whats best to do
Jul 19 14:45:02 <frikandel> i see linksys menu now
Jul 19 14:45:08 <frikandel> its on 192.168.1.101
Jul 19 14:45:21 <frikandel> so can i flash with update utility ?
Jul 19 14:46:01 <frikandel> update utilty found my nslu2 now
Jul 19 14:46:26 <frikandel> slugosbe 5.3 beta ?
Jul 19 14:46:37 <frikandel> or what sould you advise
Jul 19 14:50:45 <oliwer> frikandel, i thought your nslu was already flashed ?!!
Jul 19 14:51:16 <oliwer> anyway, you can flash it with  slugosbe 5.3 beta, that's what i have and it works great
Jul 19 14:51:48 <frikandel> i can flash over this now
Jul 19 14:51:54 <frikandel> no problem with bootloader then
Jul 19 14:52:16 <frikandel> it was flashed yes but couldnt get ip adres so i connected through cross cable and reflashed to linksys
Jul 19 14:52:26 <oliwer> haa
Jul 19 14:52:43 <frikandel> now i have ip adres in upgrade utility
Jul 19 14:52:49 <frikandel> so i can flash it now ?
Jul 19 14:52:59 <oliwer> yes
Jul 19 14:53:02 <frikandel> because linksys firmware give me samba errors
Jul 19 14:53:04 <oliwer> i guess :D
Jul 19 14:53:16 <frikandel> flashing
Jul 19 14:53:22 <oliwer> good luck!
Jul 19 14:53:25 <frikandel> but after it
Jul 19 14:53:30 <frikandel> have same ip ?
Jul 19 14:53:44 <oliwer> probably
Jul 19 14:53:49 <frikandel> ok
Jul 19 14:53:54 <frikandel> how can i cehck that then
Jul 19 14:53:58 <frikandel> if it is ok
Jul 19 14:54:00 <oliwer> with ping
Jul 19 14:54:13 <oliwer> and ssh
Jul 19 14:54:14 <frikandel> and usb must be in which port for cccam
Jul 19 14:54:37 <oliwer> any port will do
Jul 19 14:54:49 <frikandel> you use cccam also ?
Jul 19 14:54:54 <oliwer> no
Jul 19 14:54:57 <frikandel> ok
Jul 19 14:55:26 <oliwer> i have a usb key that i use as main partition
Jul 19 14:55:35 <frikandel> i have one from 8 gig
Jul 19 14:55:43 <oliwer> i use it to download torrents sometimes
Jul 19 14:55:55 <oliwer> but it's mainly for my irc bouncer
Jul 19 14:56:20 <frikandel> upgrade successfully
Jul 19 14:56:28 <oliwer> cool
Jul 19 15:00:19 <frikandel> and now
Jul 19 15:00:24 <frikandel> usb in ?
Jul 19 15:01:10 <frikandel> how can i change ip of nslu2 now oliwer
Jul 19 15:01:36 <oliwer> frikandel, wait a sec
Jul 19 15:02:53 <frikandel> it asks me for user pass
Jul 19 15:03:15 <oliwer> ye, i'm looking for the wiki page
Jul 19 15:03:48 <frikandel> i have bnot many linux skills
Jul 19 15:04:15 <oliwer> there was a really goo tutorial...
Jul 19 15:04:28 <frikandel> just want to login :)
Jul 19 15:04:39 <oliwer> i don't remember
Jul 19 15:07:43 <oliwer> http://www.nslu2-linux.org/wiki/OpenSlug/OpenSlugTurnUp
Jul 19 15:08:04 <frikandel> i am in
Jul 19 15:08:05 <oliwer> frikandel, default root password is opeNSLUg
Jul 19 15:08:12 <frikandel> found it
Jul 19 15:08:19 <oliwer> ha :)
Jul 19 15:08:41 <oliwer> if you want to use a usb key, you should set it up now
Jul 19 15:09:04 <oliwer> openslug uses a lot of space
Jul 19 15:09:52 <frikandel> what do you mean
Jul 19 15:10:09 <frikandel> i have 8 gb stick
Jul 19 15:10:13 <frikandel> in port 2
Jul 19 15:10:47 <oliwer> if you do not use a usb key, you will have very little space to install new applications
Jul 19 15:10:59 <frikandel> no thats why the usb is for
Jul 19 15:11:07 <oliwer> yes
Jul 19 15:13:48 <frikandel> damn need do delete partition but dont know how lol
Jul 19 15:14:36 <oliwer> won't mkfs just overwrite the old partitions?
Jul 19 15:14:46 <frikandel> i dont know
Jul 19 15:14:56 <oliwer> i think it does
Jul 19 15:15:07 <oliwer> it will warn you before doing anything
Jul 19 15:15:22 <frikandel> Partition number (1-4): 1
Jul 19 15:15:22 <frikandel> Partition 1 is already defined, delete it before re-adding
Jul 19 15:16:05 <oliwer> this is from mkfs?
Jul 19 15:16:10 <frikandel> mkfs ?
Jul 19 15:16:23 <oliwer> mkfs.ext3 (from the tutorial)
Jul 19 15:16:39 <frikandel> i added a usb stick in port 2 and then this command # fdisk /dev/sda
Jul 19 15:16:51 <oliwer> ha
Jul 19 15:16:58 <frikandel> ?
Jul 19 15:17:03 <oliwer> fdisk is too complicated, i never use it
Jul 19 15:17:16 <frikandel> no but my tut says so
Jul 19 15:17:31 <frikandel> but u need to delete partition first
Jul 19 15:17:34 <frikandel> dont know how
Jul 19 15:17:40 <oliwer> no
Jul 19 15:17:47 <oliwer> but it must be easy to find
Jul 19 15:19:10 <oliwer> http://www.cyberciti.biz/faq/linux-how-to-delete-a-partition-with-fdisk-command/
Jul 19 15:19:15 <oliwer> it's 'd'
Jul 19 15:19:25 <frikandel> yes but then
Jul 19 15:19:35 <frikandel> Disk /dev/sda: 8011 MB, 8011087872 bytes
Jul 19 15:19:35 <frikandel> 32 heads, 63 sectors/track, 7761 cylinders
Jul 19 15:19:35 <frikandel> Units = cylinders of 2016 * 512 = 1032192 bytes
Jul 19 15:19:35 <frikandel>    Device Boot      Start         End      Blocks  Id System
Jul 19 15:19:52 <frikandel> no part is defined yet so its deleted now
Jul 19 15:19:54 <oliwer> it deleted everything?
Jul 19 15:20:14 <oliwer> huh
Jul 19 15:20:15 <frikandel> on stick yes
Jul 19 15:22:26 <frikandel> system reboots :)
Jul 19 15:22:28 <frikandel> lol nice
Jul 19 15:22:34 <frikandel> this little thing running linux
Jul 19 15:22:39 <frikandel> how fast is it
Jul 19 15:22:42 <frikandel> proc and mem
Jul 19 15:24:06 <oliwer> heh
Jul 19 15:24:13 <frikandel> that nslu2
Jul 19 15:24:32 <oliwer> well it depends, if you try to run heavy php or python we sites, it is quite slow
Jul 19 15:24:39 <frikandel> no 
Jul 19 15:24:44 <frikandel> cardserver for sattelite
Jul 19 15:24:49 <frikandel> CCCam
Jul 19 15:25:21 <oliwer> card server? CCCam is not a security camera?
Jul 19 15:28:14 <frikandel> no
Jul 19 15:28:25 <frikandel> from sattelite you get code on  satbox card
Jul 19 15:28:46 <frikandel> but now nslu2 acts like satbox and  get keys out of the card to share
Jul 19 15:28:57 <oliwer> oh i see
Jul 19 15:29:07 <oliwer> btw, http://www.cccamforum.com/forums/showthread.php?t=61034
Jul 19 15:29:12 <oliwer> i just found this
Jul 19 16:10:54 <frikandel> ipkg update doesnt work
Jul 19 16:27:03 <DrJ> error?
Jul 19 16:30:22 <frikandel> yes
Jul 19 16:30:35 <frikandel> opkg update
Jul 19 16:30:35 <frikandel> Downloading http://ipkg.nslu2-linux.org/feeds/slugosbe/cross/5.3-beta/Packages.gz
Jul 19 16:30:35 <frikandel> Inflating http://ipkg.nslu2-linux.org/feeds/slugosbe/cross/5.3-beta/Packages.gz
Jul 19 16:30:35 <frikandel> Updated list of available packages in /usr/lib/opkg/lists/cross
Jul 19 16:30:35 <frikandel> Downloading http://ipkg.nslu2-linux.org/feeds/slugosbe/native/5.3-beta/Packages.gz
Jul 19 16:30:35 <frikandel> wget: server returned error: HTTP/1.1 404 Not Found
Jul 19 16:30:35 <frikandel> Collected errors:
Jul 19 16:30:36 <frikandel>  * Failed to download http://ipkg.nslu2-linux.org/feeds/slugosbe/native/5.3-beta/Packages.gz, error 1
Jul 19 16:30:51 <Reedy> are your default gateway and dns settings set for the device?
Jul 19 16:30:56 <frikandel> yes
Jul 19 16:31:29 <DrJ> yea, that one is missing
Jul 19 16:31:38 <frikandel> ?
Jul 19 16:31:47 <frikandel> i need to update right
Jul 19 16:31:49 <frikandel> then upgrade
Jul 19 16:32:53 <frikandel> so whats nex ?
Jul 19 16:35:24 <frikandel> need to update ?
Jul 19 20:04:50 <frikandel> ipkg update
Jul 19 20:04:50 <frikandel> Downloading http://ipkg.nslu2-linux.org/feeds/slugosbe/cross/4.8-beta/Packages.gz
Jul 19 20:04:50 <frikandel> Inflating http://ipkg.nslu2-linux.org/feeds/slugosbe/cross/4.8-beta/Packages.gz
Jul 19 20:04:50 <frikandel> Updated list of available packages in /var/lib/ipkg/cross
Jul 19 20:04:50 <frikandel> Downloading http://ipkg.nslu2-linux.org/feeds/slugosbe/native/4.8-beta/Packages.gz
Jul 19 20:04:50 <frikandel> wget: server returned error 404: HTTP/1.1 404 Not Found
Jul 19 20:04:50 <frikandel> An error ocurred, return value: 1.
Jul 19 20:04:51 <frikandel> Collected errors:
Jul 19 20:04:52 <frikandel> ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp 
Jul 19 20:04:59 <frikandel> why doesnt it work
Jul 19 21:07:41 <MiKa_> frikandel: i got the same last 2 months..
Jul 19 21:11:06 <frikandel> damn
Jul 19 21:11:10 <frikandel> no solution ?
Jul 19 21:19:12 <MiKa_> i have no idea , i tolt you because i think the problem is not on your side
Jul 19 21:19:42 <frikandel> ok :(
**** ENDING LOGGING AT Wed Jul 20 02:59:57 2011