**** BEGIN LOGGING AT Mon Aug 29 02:59:56 2005 Aug 29 03:06:22 03florian 07org.openembedded.dev * r6863bbb5... 10/classes/pkgconfig.bbclass: pkgconfig.bbclass: Fix bug causing failure. Aug 29 03:17:50 hi to all guys Aug 29 03:18:10 anyone axperienced using lcdproc package wit openslug ? **** BEGIN LOGGING AT Mon Aug 29 04:34:32 2005 Aug 29 05:29:35 rwhitby: already looked at the mtd dump? Aug 29 05:29:47 hy Aug 29 05:33:03 mma: yes thanks. ftp://ftp.denx.de/pub/ppcboot/ppcboot-2.0.0.tar.bz2 is the bootloader Aug 29 05:48:26 rwhitby: what board is using the ancient ppcboot? Aug 29 05:49:14 Jacmet: ds-101g+ Aug 29 05:49:25 mma: ohh ok Aug 29 05:55:48 rwhitby: ping? Aug 29 05:56:27 pong Aug 29 05:57:17 I checked in the changes I did to cvs. Any idea how I could change which binutils version it uses? Aug 29 05:57:46 should be able to do that in the .dat file Aug 29 05:58:22 that's what Tiersten said too... But it still uses the same version when I try... Aug 29 07:09:52 DaKa: ping? Aug 29 07:10:40 It would seem that some mail from a swedish uni showed up at my parents place today Aug 29 07:11:03 :) Aug 29 07:13:31 that's a sexy beast too: http://www.tomsnetworking.com/Reviews-61-ProdID-USR8200-2.php Aug 29 07:14:13 A slug's cousin with 2 USB, 1 Firewire, a Switch, 64MB Ram 16MB Flash and the ixp422 with this crypto stuff Aug 29 07:26:04 the new 2.6.13 kernel is out. Aug 29 07:26:21 It apparently fixes some Flash resource range thing on IXP4xx. Aug 29 07:28:28 They've finally fixed that? Aug 29 07:43:25 I have no idea what the problem is though, just repeating changelog Aug 29 07:44:55 this is really annoying Aug 29 07:45:00 I keep missing stuff Aug 29 07:45:40 ya! What the hell is going on? Aug 29 07:46:40 They're trying to break the network :P Aug 29 07:46:48 hehehe Aug 29 08:01:29 aha, irc server software upgrade: http://freenode.net/news.shtml Aug 29 08:18:15 re all Aug 29 08:18:52 anyone built ucslugc? Aug 29 08:27:10 NAiL: heh, you got the package? Aug 29 08:28:17 I haven't picked it up yet Aug 29 08:29:03 ah, but, they didn't say it looked empty/broken? Aug 29 08:30:10 nope Aug 29 08:30:25 my mom said it looked like pc stuff :P Aug 29 08:30:31 :) Aug 29 08:35:53 make crosstool gives me this: cp: `/home/mma/optware/toolchain/crosstool/patches/gcc-3.3.4/gcc-3.3.4-arm-bigendian.patch' and `/home/mma/optware/toolchain/crosstool/patches/gcc-3.3.4/gcc-3.3.4-arm-bigendian.patch' are the same file. Any ideas? Aug 29 09:21:03 03koen 07org.openembedded.dev * r0364f56d... 10/packages/matchbox-panel-hacks/ (2 files in 2 dirs): Aug 29 09:21:03 matchbox-panel-hacks: use 'left' modmap on rotating to the left, not the 'right' Aug 29 09:21:03 Verified on a c700 and h5550 Aug 29 09:21:06 03mickeyl 07org.openembedded.dev * ra780a7c7... 10/packages/qte/ (qte-2.3.10/c7x0-w100-accel.patch qte_2.3.10.bb): qte-2.3.10: update c7x0-w100 accelleration patch. This version fixes painting QBitmaps. Patch courtesy Manuel Teira. Aug 29 10:46:12 03koen 07org.openembedded.dev * rdd1c64ff... 10/packages/gpe-buttonbox/ (gpe-buttonbox_0.5.bb gpe-buttonbox_cvs.bb): gpe-buttonbox: add 0.5 and tidy up the cvs version Aug 29 12:45:18 hy Aug 29 12:45:26 hi Aug 29 13:36:10 03koen 07org.openembedded.dev * re038aacc... 10/packages/gtk+/ (14 files in 2 dirs): gtk+-2.8.3: add it Aug 29 14:20:31 i want to upgrade the version of crosstool used by optware to version 0.38. this will enable building on FC4 and other gcc4 systems, and fix the syslimits.h bug that is presently worked around in crosstool-native.mk. any views / comments before i do so? Aug 29 14:21:24 jp30-work: if it works, go for it :-) Aug 29 14:21:57 just testing on an FC4 system now... Aug 29 14:33:18 03orepvik * 10unslung/make/crosstool.mk: Fix CROSSTOOL_SCRIPT ?= Aug 29 14:33:21 (just for info) i managed to package this today : http://iksemel.jabberstudio.org/ . everything works perfectly except that i needed to export LD_LIBRARY_PATH to /opt/lib Aug 29 14:35:18 MooZ: if you're using Optware, the makefile should do the rpath thing for you. Aug 29 14:35:35 i'm not using it Aug 29 14:35:57 what build system did you use to build and package it then ? Aug 29 14:36:10 03koen 07org.openembedded.dev * rf522bba0... 10/packages/gpe-calendar/gpe-calendar_0.64.bb: gpe-calendar: add 0.64 Aug 29 14:38:53 i'm building it on my slug with what's described in AddAPackageToUnslung Aug 29 14:39:39 that's optware (used to be called Unslung packages) Aug 29 14:39:56 so you have an iksemel.mk file ? Aug 29 14:40:39 yes Aug 29 14:40:54 do you have CVS write access ? Aug 29 14:41:08 nop Aug 29 14:41:11 03koen 07org.openembedded.dev * r65bc784d... 10/conf/distro/preferred-gpe-versions-2.7.inc: conf/distro/preferred-gpe-versions-2.7.inc: update gpe-calendar to 0.64 Aug 29 14:41:37 send the iksemel.mk file to the nslu2-linux mailing list, with your sf.net id, and we'll get you write access so you can contribute it Aug 29 14:41:45 ok Aug 29 14:41:52 and we'll work out the rpath thing too. Aug 29 14:42:15 if there a reason you natively compiled it ? did you try cross compilation at all ? Aug 29 14:42:19 maybe i forgot or deleted something needed :/ Aug 29 14:42:42 i didn't try cross compiling it Aug 29 14:43:09 contribute the .mk file, and then we can look at whether it cross compiles easily. Aug 29 14:43:20 ok Aug 29 14:43:41 are you working on another package which uses that library? Aug 29 14:43:57 yes Aug 29 14:43:59 gloox Aug 29 14:50:51 anything related to Google Talk ? Aug 29 14:52:49 i don't think so Aug 29 15:01:15 03mickeyl 07org.openembedded.dev * r697cade2... 10/packages/efl++/ (6 files): efl++: upgrade to 0.0.3 Aug 29 15:01:18 03koen 07org.openembedded.dev * r558bb65f... 10/conf/distro/familiar-0.8.3.conf: Aug 29 15:01:18 familiar-0.8.3.conf: don't include stale preferred-e-versions.inc Aug 29 15:01:18 23:57 < mickeyl> it's no longer necessary since our cleanup Aug 29 15:01:18 23:57 < mickeyl> it may be again when we add cvs versions, but until now, just don't include it Aug 29 15:18:16 ~weather enva Aug 29 15:18:29 Something failed in connecting to the NOAA web server. Try again later. Aug 29 15:18:33 bleh Aug 29 15:24:53 03jp30 * 10unslung/make/ (crosstool.mk crosstool-native.mk): bump version of crosstool used for optware's toolchain to 0.38; crosstool-native will continue to use 0.28-rc37 for now Aug 29 15:27:19 03florian 07org.openembedded.dev * rdec7ffeb... 10/packages/gpe-session-scripts/gpe-session-scripts_0.65.bb: gpe-sessionscripts: New release using xserver-common. Aug 29 15:27:21 03florian 07org.openembedded.dev * r349864fb... 10/packages/gpe-dm/gpe-dm_0.48.bb: New release making use of xserver-common. Aug 29 15:27:24 03florian 07org.openembedded.dev * r9c64df1a... 10/packages/gpe-login/gpe-login_0.82.bb: New release improving access restrictions. Aug 29 15:27:26 03florian 07org.openembedded.dev * r5f01ba35... 10/packages/xserver-common/xserver-common_1.1.bb: xserver-common: New package providing common X support files and scripts. Aug 29 15:27:29 03florian 07org.openembedded.dev * r160720a4... 10/packages/e17/entrance_20050810.bb: Use xserver-common instead of x11-common. Aug 29 15:28:35 has anyone looked at the USB controller in he SLUG in detail ? Aug 29 15:30:04 It seems to me that all FIVE ports are actually available Aug 29 15:30:40 it's just that 3 connectors and power is missing, but that can be remedied Aug 29 15:32:12 we're looking at that **** BEGIN LOGGING AT Mon Aug 29 15:57:59 2005 Aug 29 16:01:35 bye Aug 29 16:01:50 attila: Confirmed that it works ;) Aug 29 16:06:00 w00t :) Aug 29 16:06:27 I've soldered a memstick to two of the resistors Aug 29 16:07:02 It's soldered on the side facing RP1/RP2. I used R165 and R166 Aug 29 16:07:33 Took GND/5V from the broken port on my slug Aug 29 16:11:15 they probably decided that the risk of burning down the slug was too high with more than two ports Aug 29 16:11:41 especially if all ports have bus powered devices Aug 29 16:12:00 possible. I'm not using many bus-powered devices Aug 29 16:12:39 even more so if these would be 2.5" disks that often come in bus powered USB racks Aug 29 16:12:59 4 of those would be way beyond 10W Aug 29 16:16:34 conradl: any news? Aug 29 17:05:22 * ka6sox-office : NOTICE there will be an emergency outage of the nslu2-linux.org server affecting web,ipkg,ipkgfind,and monotone...it is expected that this outage will be 1hr **** BEGIN LOGGING AT Mon Aug 29 19:24:34 2005 **** BEGIN LOGGING AT Mon Aug 29 19:27:31 2005 Aug 29 21:44:46 anybody wanna answer a serial cable Question? Aug 29 21:50:40 you can try asking :-) Aug 29 21:52:17 well....I have now a usb> nokia cable that nslu2 and other pages say works for serial low > high volts. Aug 29 21:53:28 i also have a serial only version of the same thing. So the phone is happy either way. right. but is the nslu2? Aug 29 21:54:29 Short question is there a way to test or have i done that (the phone) Aug 29 21:56:21 logic is the usb cable is a good thing therefore the same cable in serial MUST be fine as well. Aug 29 22:02:06 conradl: I'm actually using the Compsys MAX 3232 based adaptor. No first hand experience with the hacked mobile phone cables here. Aug 29 22:03:44 However, if you have a cable that works with the phone at TTL levels and you don't butcher it too much when adapting for the NSLU2, then it ought to work. Aug 29 22:04:32 Thats my thought. the serial phone cable must have hidden magic . Aug 29 22:04:53 rather than a bump in the middle of the cable. Aug 29 22:06:00 Most of these devices have a transceiver circuit in one of the connectors. I think there are pictures on the wiki. Aug 29 22:06:51 yeah... i cant see the goodness in the serial cable thou. err on the side of caution. Aug 29 22:10:00 confirmed---google worked after a real effort. its all good. Aug 29 22:15:35 conradl Aug 29 22:16:21 your cable doesn't have the big dongle in the middle? Aug 29 22:19:30 the usb from rod does but my serial dosn't Aug 29 22:20:19 but they do the same job so...my serial cable must be fine? Aug 29 22:20:29 the reason the dongle is important is because it usually houses a PL2303 chip Aug 29 22:20:57 thats right but the pl2303 is usb to serial @ 3 or 5 volt Aug 29 22:21:40 the phone in question 6210 needs 3 volt so the serial cable must be hideing a secret. Aug 29 22:22:21 if it doesn't have a PL2303 chip in it, then *I'm* not sure that it would work.... Aug 29 22:23:03 Thats the prob...how to test cheaply...ie no cost to my nslu2 or soon to be ds101g= Aug 29 22:23:18 it might, but then again in trying to figure out if you've got the right lines - you might burn out a pin on the IXP Aug 29 22:25:35 yeah i hear thats fun. i can ident the gnd and data in/out. but. Aug 29 22:26:04 I speak from experience.... Aug 29 22:26:18 I've got 9 extra cables here Aug 29 22:26:34 all ready to rock. Aug 29 22:26:56 http://www.atrox.at/datacable/dau9/index.html Aug 29 22:27:22 on my third cable, I killed the rx pin on FrankenSlug Aug 29 22:27:45 i don't know if should tell people that, Aug 29 22:29:55 i just looked @ it. there are two data paths fbus/mbus Aug 29 22:30:12 yeah, I'm looking at it right now Aug 29 22:31:04 so usb is fine right. but the serial could be using mbus pin6 only? not the needed pins 7/8 Aug 29 22:33:13 test on rods new ds101? first? Aug 29 22:34:02 heh, I don't think I would recommend that... :) Aug 29 22:34:25 if i built it i would be happy A. cos i did it and B I know whats connected. Aug 29 22:34:44 he wouldn't even know till he opened the airbag.... Aug 29 22:35:06 except that he's awake and reading this log..... Aug 29 22:35:12 I think the seal should stay on his now i said that Aug 29 22:38:42 looking @ a pic of the serial cable ...thats a big sealed backshell. could contain goodness. Aug 29 22:45:07 the usb is a fbus cable...so i need to do the same test on the serial when i get home. Aug 29 22:47:02 this is prob so basic to someone reading this. Aug 30 00:40:55 hi Aug 30 00:49:47 lo Aug 30 02:24:16 Anyone who wants a free Opera registration, just send an empy email to registerme@opera.com - apparently it is their 10th anniversary and they are giving them away free today. I just sent an email, and an auto-responder sent back registration codes for all platforms. Aug 30 02:25:42 "For one day only, you can get an ad-free version of Opera. Simply e-mail registerme@opera.com to obtain a registration code. This offer is valid from 12 a.m. Tuesday, August 30 to 12 a.m. Wednesday, August 31 2005 (PDT)." Aug 30 02:30:55 nice Aug 30 02:30:56 tnx Aug 30 02:32:44 just unbricking my first slug with jtag atm .. .btw Aug 30 02:38:56 rwhitby: I'm looking into that appweb issue... Aug 30 02:40:17 what puzzles me though is that when I built appweb using the make file and then installed it I didn't get this problem. I don't have any dev environment installed on the slug Aug 30 02:41:11 could it be that I did my testing from the unslung cvs tree? I got the whole thing down freshly when I did the development of appweb Makefile a couple of weeks ago. Aug 30 02:41:47 dunno. Aug 30 02:41:53 have there been any changes to the appweb.mk file since I uploaded it? Aug 30 02:42:01 don't think so Aug 30 02:42:16 I'm on to the appweb developers to see if they have any thoughts. Aug 30 02:47:45 rwhitby: just a thought... do you think there are any conditions where the library path might not be found during the /opt/etc/init.d boot sequence, but would be found if the init.d file was run from a console ofter subsequently logging in. Aug 30 02:49:04 only reason I ask is that I seem to have a similar error in my historic logs which happened on reboot of the slug (which I assumed was because I moved the web space into a user's quota) Aug 30 02:50:12 do you have LD_LIBRARY_PATH in any of your profile or bashrc files ? Aug 30 02:53:01 nope... Aug 30 02:53:22 dunno then Aug 30 02:53:25 just checked the ~/. files and the /opt/etc/ files.. Aug 30 02:53:35 hmmm very strange... Aug 30 02:53:39 thanks. **** ENDING LOGGING AT Tue Aug 30 02:59:56 2005