**** BEGIN LOGGING AT Tue Aug 30 02:59:56 2005
Aug 30 03:01:32 <CIA-8> 03koen 07org.openembedded.dev * r2df03676... 10/packages/libmimedir/libmimedir_cvs.bb: libmimedir: add upstream source
Aug 30 03:01:34 <CIA-8> 03koen 07org.openembedded.dev * recf0ce2f... 10/packages/libmimedir/libmimedir_cvs.bb: libmimedir_cvs: default_preference = -1
Aug 30 03:37:34 <odoc> jtag worked ... nice
Aug 30 04:18:06 <odoc> did this work for anybody ? : fis write -f 0x50000000 -b 0x01000000 -l 0x00800000
Aug 30 04:19:18 <odoc> im getting: Err = 9910
Aug 30 04:19:26 <odoc> and a destroyed redboot
Aug 30 04:19:33 <odoc> so .. don't try this @ home ;P
Aug 30 04:20:13 <Tiersten> uh
Aug 30 04:20:16 <Tiersten> no... you shouldn't do that
Aug 30 04:20:28 <Tiersten> The correct command is "fis write -f 0x50060000 -b 0x01060000 -l 0x7a0000"
Aug 30 04:20:41 <Tiersten> You just overwrote RedBoot and since you're actually using RedBoot at the same time it doesn't appreciate it
Aug 30 04:20:52 <odoc> i wanted to set the mac adress
Aug 30 04:20:59 <odoc> so i patched the bin
Aug 30 04:21:04 <odoc> as stated in the wiki
Aug 30 04:21:20 <Tiersten> If you want to replace RedBoot then you should write it from Linux
Aug 30 04:21:37 <Tiersten> Or load a RAM only copy of RedBoot and jump to that from the flash copy
Aug 30 04:21:48 <odoc> cause the nslu wont boot the firmware aftet running redboot
Aug 30 04:21:52 <odoc> after
Aug 30 04:22:04 <Tiersten> You've partially erased it.  that's why it's not booting
Aug 30 04:22:30 <Tiersten> Where does it tell you to edit the MAC address in the RedBoot blocks?
Aug 30 04:23:28 <Tiersten> Are you able to recover it?
Aug 30 04:23:51 <odoc> http://www.nslu2-linux.org/wiki/HowTo/RecoverFromABadFlash
Aug 30 04:23:59 <odoc> MAC Address Hosed
Aug 30 04:24:18 <odoc> yes .. the slug is jtag enabled
Aug 30 04:24:19 <Tiersten> hrm
Aug 30 04:24:31 <Tiersten> I'd better get rid of that
Aug 30 04:24:34 <odoc> redboot is dead ... so i have to wait another hour :)
Aug 30 04:24:40 <Tiersten> wonder who added it
Aug 30 04:24:40 <Tiersten> 40 minutes :)
Aug 30 04:24:49 <odoc> jup .. didn't work for me the first time
Aug 30 04:24:56 <odoc> cause of that ... my nslu has jtag now .)
Aug 30 04:25:17 <Tiersten> ahh
Aug 30 04:25:35 <Tiersten> I've replaced RedBoot with no problems from Linux
Aug 30 04:25:46 <Tiersten> Never tried whilst it was actually running at the same time
Aug 30 04:26:04 <odoc> should i flash apex this time ... or stay with redboot ?
Aug 30 04:26:24 <Tiersten> Up to you.  APEX doesn't support the NPEs but it is smaller
Aug 30 04:27:04 <odoc> so i stay with redboot for the moment
Aug 30 04:29:07 <dyoung> odoc, do you have a backup copy of redboot by chance?
Aug 30 04:29:59 <dyoung> I should say of *your* redboot.
Aug 30 04:30:04 <odoc> nope
Aug 30 04:30:09 <dyoung> Ok
Aug 30 04:30:09 <odoc> it was killed long time ago :(
Aug 30 04:30:31 <dyoung> do you have a copy of the R29 linksys firmware handy, or a openslug image handy?
Aug 30 04:30:32 <odoc> ive got one with dd if=images/Unslung-5.5-beta.bin of=redboot.bin ibs=1 count=262144 conv=swab
Aug 30 04:30:41 <dyoung> Aha, so you do have it
Aug 30 04:30:45 <dyoung> cool.
Aug 30 04:30:49 <odoc> but used a patched linksys one
Aug 30 04:31:00 <odoc> i unbricked the nslu 2 hours ago
Aug 30 04:31:06 <odoc> and now its bricked again ;P
Aug 30 04:31:19 <odoc> but this time ... it isn't detected via jtag :(
Aug 30 04:31:24 <odoc> let me check cables
Aug 30 04:31:27 <dyoung> oh....
Aug 30 04:32:41 <odoc> mhh
Aug 30 04:32:45 <Tiersten> ?
Aug 30 04:32:46 <odoc> wtf?
Aug 30 04:32:57 <odoc> jtag> detect
Aug 30 04:32:57 <odoc> jtag>
Aug 30 04:33:05 <odoc> doesn't look good
Aug 30 04:33:20 <Tiersten> Does the cable command give any errors?
Aug 30 04:33:33 <odoc> no
Aug 30 04:33:47 <Tiersten> Unplug the NSLU2 and plug it back in
Aug 30 04:33:52 <Tiersten> from power and JTAG
Aug 30 04:36:03 <odoc> still dead
Aug 30 04:36:13 <odoc> will reboot this box too ... just in case
Aug 30 04:37:01 <rwhitby-away> conradl: can you check the output of the serial cable with a voltmeter?
Aug 30 04:37:12 <rwhitby-away> if it's 3.3V, then it can't hhurt
Aug 30 04:38:16 <conradl> scope only...i sold mine when i moved to oz.
Aug 30 04:38:29 <rwhitby-away> scope will tell you voltages, right?
Aug 30 04:38:39 <conradl> sort of
Aug 30 04:38:50 <Tiersten> Get the ruler out :)
Aug 30 04:39:21 <conradl> even @ 2400 Baud its hard to measure little pulses
Aug 30 04:40:00 <Tiersten> It's not a DSO?
Aug 30 04:40:18 <conradl> its all good i will put your cable with your new toy and send it at MAX speed.
Aug 30 04:40:43 <dyoung> Just measure the TX pin
Aug 30 04:40:50 <conradl> with ?
Aug 30 04:41:03 <dyoung> a scope or voltmeter
Aug 30 04:41:26 <dyoung> when nothing is being transmitted it'll be logic high
Aug 30 04:41:40 <odoc> still dead
Aug 30 04:41:52 <odoc> dyoung, talking to me ?
Aug 30 04:41:53 <conradl> please hold
Aug 30 04:42:00 <Tiersten> odoc: He was talking to conradl
Aug 30 04:42:06 <odoc> k
Aug 30 04:42:17 <Tiersten> odoc: Nothing at all?  Does the LED light?
Aug 30 04:42:27 <odoc> had some probs with my bnc .. .sometimes it doesnt deconnect from freenode
Aug 30 04:42:34 <odoc> only the led of the power switch
Aug 30 04:43:30 <Tiersten> Do you get any output on the serial port?
Aug 30 04:43:42 <odoc> no
Aug 30 04:43:43 <odoc> nothing
Aug 30 04:44:58 <rwhitby-away> odoc: how did you brick it in the first place (i.e. the time before running the dangerous wiki instructions) ?
Aug 30 04:47:15 <odoc> the first time with the wiki instructions ;P
Aug 30 04:47:17 <odoc> long story
Aug 30 04:47:32 <odoc> the nslu was unstable ... got kernel oops even with original fw
Aug 30 04:48:17 <Tiersten> Sounds like the bad hardware
Aug 30 04:48:28 <Tiersten> The original firmware shouldn't have given you any oopses
Aug 30 04:49:04 <odoc> i think so too
Aug 30 04:49:10 <odoc> first i thought it was the turbo mode
Aug 30 04:49:31 <odoc> but even after reassembling R83 it was unstable
Aug 30 04:49:32 <Tiersten> Even if it was bad RAM then you should still be able to get JTAG working as it's part of the IXP itself
Aug 30 04:49:50 <rwhitby-away> odoc: and then ...
Aug 30 04:49:56 <odoc> will build a real jtag adapter from byteblaster to slug tonight
Aug 30 04:50:15 <odoc> it was attached to my bread board ... but worked fine the first time
Aug 30 04:50:37 <rwhitby-away> why did you decide to reflash the bootloader?
Aug 30 04:50:48 <odoc> rwhitby-away, was my last try
Aug 30 04:51:12 <odoc> the slug was already unusable 
Aug 30 04:51:19 <odoc> so nothing i could damage
Aug 30 04:51:29 <rwhitby-away> but the bootloader plays absolutely no part in normal operation.  if the kernel boots, then the bootloader has done it's job.
Aug 30 04:51:34 <odoc> before playing around ... it rest for about 5 minutes
Aug 30 04:51:59 <odoc> though that maybe it could be a strange setting in flash
Aug 30 04:52:26 <odoc> and because of serial and r83 it was out of warranty
Aug 30 05:01:02 <odoc> Device Id: 00011001001001110111000000010011
Aug 30 05:01:08 <odoc> was a connection problem ;(
Aug 30 05:01:31 <rwhitby> mcdmx: thx again for the DS101g mtd dumps
Aug 30 05:02:03 <mcdmx> rwhitby: your welcome... So what's your decision?
Aug 30 05:02:29 <rwhitby> actually, you can help - how loud is the fan ?
Aug 30 05:03:29 <mcdmx> rather noisy :(
Aug 30 05:03:47 <mcdmx> (a high-pitched noise)
Aug 30 05:03:56 <rwhitby> mcdmx: that's *not* what I wanted to hear ...
Aug 30 05:04:19 <mcdmx> I asked my vendor for a replacement but had no luck  :( 
Aug 30 05:04:37 <rwhitby> conradl: you listening to this ?
Aug 30 05:04:53 <mcdmx> but if the ds-101g doesn't require a fan, i wonder if one could just disable it
Aug 30 05:05:02 <mcdmx> s/ds-101g/ds-101/
Aug 30 05:05:47 <Tiersten> odoc: Ah cool
Aug 30 05:05:53 <peteru-home> 101 is fanless, 101g is supposed to have a "quiet" fan with speed control.
Aug 30 05:06:04 <odoc> flashing redboot right now
Aug 30 05:06:05 <mcdmx> rwhitby: I just sent a optware patch to NAiL for the ds-101g. I am now able to build binaries for it.
Aug 30 05:06:16 <rwhitby> mcdmx: do you have an sf.net id ?
Aug 30 05:06:22 <mcdmx> peteru-home: i did not notice anything about the speed control.
Aug 30 05:06:31 <mcdmx> rwhitby: yes... why?
Aug 30 05:06:54 <rwhitby> what is it?  I'll get you optware write access right here and now
Aug 30 05:07:38 <mcdmx> rwhitby: it's the same id as my irc nick ;-) But i'm not sure if i'm ready to commit to cvs yet...
Aug 30 05:08:28 <peteru-home> mcdmx: Well, I am making the assumption that "smart fan" in synology speak is the same as "smart fan" in normal PC mobo/PSU speak - fan speed linked to temperature sensor
Aug 30 05:08:52 <mcdmx> rwhitby: besides, i don't own a ds-101g+ myself. The box I'm currently hacking on belongs to a friend...
Aug 30 05:09:43 <rwhitby> mcdmx: if you've built an optware binary for a new arch, then you are definitely ready for cvs access
Aug 30 05:10:29 <mcdmx> rwhitby: yes, but as soon as i have returned the box, it makes no sense to have cvs write access ;-)
Aug 30 05:11:13 <rwhitby> mcdmx: too late, you've got it now
Aug 30 05:11:24 <mcdmx> arghh.....
Aug 30 05:11:53 <odoc> hehe ... its not often people fighting AGAINST cvs-write access ;P
Aug 30 05:12:22 <rwhitby> odoc: this is a meritocracy - doesn't matter whether you want it or not :-)
Aug 30 05:12:34 <rwhitby> if you're good enough, you get it ...
Aug 30 05:12:44 <dyoung> odoc, so youre paying the 40-minute penalty now?
Aug 30 05:12:58 <rwhitby> plenty of time to check in the optware changes ....
Aug 30 05:12:59 <odoc> yes
Aug 30 05:13:04 <dyoung> did you remember to twiddle the MAC into there before starting?
Aug 30 05:13:17 <odoc> yes
Aug 30 05:13:17 <odoc> :)
Aug 30 05:13:19 <dyoung> (into your redboot image that is)
Aug 30 05:13:21 <dyoung> Good.
Aug 30 05:13:29 <odoc> i need turbo-jtag :)
Aug 30 05:13:32 <conradl> rods cable peak to 2.8 v and mine are from 0 to 8V and one dead, and  one noisey fan to clip out maybe
Aug 30 05:13:37 <dyoung> I forgot once.  So I had to pay the penalty twice. :-)
Aug 30 05:13:46 <conradl> a nice slow 120 + 5
Aug 30 05:13:55 <conradl> 5 volts that was
Aug 30 05:14:10 <odoc> ive alread paid plenty of penalty ...
Aug 30 05:14:22 <odoc> first penalty was ... removing the ls244 out of the jtag cable ;P
Aug 30 05:14:48 <odoc> i wish penalty in slug would only be 2 minutes like in hockey
Aug 30 05:14:59 <rwhitby> conradl: hold off on my purchase, and keep the cable.  ByronT is sending me a replacement.
Aug 30 05:15:00 <dyoung> conradl: the 0-8V is probably the serial side?
Aug 30 05:15:09 <conradl> ok?
Aug 30 05:16:04 <conradl> yip that was a STd usb-serial with a pl2303
Aug 30 05:16:35 <dyoung> Aha.
Aug 30 05:16:37 <dyoung> Okay.
Aug 30 05:16:54 <conradl> i think i can re do it to 3V with a good light and clear head. and solder
Aug 30 05:17:13 <dyoung> so if you want to use it with a nslu2 or dizzy, you'll need to tap into it before the MAX(3)232.
Aug 30 05:17:35 <rwhitby> conradl: just keep the cable I sent
Aug 30 05:17:59 <conradl> have got the sata drive ready to go to the car boot!.. am studying the std cable/ rods and the data sheet.
Aug 30 05:20:34 <conradl> i think i will grab the max 3232 ics from nz and build a few kits. one each and a spare.
Aug 30 05:28:44 <NAiL> anyone got bluetooth working with a broadcom (sigh) chipset?
Aug 30 05:29:34 <NAiL> I got a free TeCom dongle
Aug 30 05:29:48 <NAiL> Not that I have *anything* that can use bluetooth, but... I want it to work! ;)
Aug 30 05:30:05 <dyoung> isnt all that stuff standarized?
Aug 30 05:30:27 <rwhitby> NAiL: is it a usb dongle ?
Aug 30 05:31:24 <rwhitby> one of these: http://www.mobilelinktech.com/shop/bluetooth/bt0ubtc100.php ?
Aug 30 05:31:55 <rwhitby> you can probably run it in OpenSlug (see the BlueSlug wiki page)
Aug 30 05:34:43 <NAiL> yes
Aug 30 05:34:45 <NAiL> cool
Aug 30 06:02:29 <odoc> RedBoot>
Aug 30 06:02:32 <odoc> slug is back online
Aug 30 06:04:28 <rwhitby> congrats!
Aug 30 06:04:56 <rwhitby> we didn't want to spoil our record ...
Aug 30 06:05:15 <NAiL> rwhitby: no success with bluetooth
Aug 30 06:05:35 <rwhitby> did the driver recognise the dongle ?
Aug 30 06:05:47 <NAiL> Can't say that it looks like it
Aug 30 06:08:59 <rwhitby> you may need BT_HCIBCM203X as a module ...
Aug 30 06:09:53 <NAiL> which I guess is not compiled for 2.5-beta?
Aug 30 06:17:28 <rwhitby> not unless you've checked in your defconfig changes ...
Aug 30 06:18:12 <NAiL> heh :P
Aug 30 06:18:53 <NAiL> Ok, I'll fix that and check it in after my full build completes
Aug 30 06:18:53 <rwhitby> NAiL: this page (http://www.holtmann.org/linux/bluetooth/features.html) and the drivers/bluetooth/Kconfig file should get you working
Aug 30 06:19:15 <rwhitby> feel free to just enable all the bluetooth modules ...
Aug 30 06:19:19 <NAiL> aha.. I was at that page earlier.
Aug 30 06:19:40 <NAiL> Didn't make much sense then. Not now either... but I guess it will ;)
Aug 30 06:19:42 <rwhitby> well, at least all the USB-relevant ones
Aug 30 06:20:37 <rwhitby> the FW_LOADER thingo worries me though ...
Aug 30 06:20:53 <rwhitby> night all
Aug 30 06:21:01 <NAiL> nite
Aug 30 06:32:31 <odoc> slug is still not working
Aug 30 06:32:39 <odoc> got "Kernel panic: VFS: Unable to mount root fs on 01:00" now
Aug 30 06:32:47 <odoc> complete log: http://pastebin.com/350025
Aug 30 07:09:32 <odoc> now im back to old-state
Aug 30 07:09:37 <odoc> the nslu seg-faults :(
Aug 30 07:24:57 <peteru-home> odoc: Perhaps you have bad flash? Looks like the compressed image may contain biterrors or be completely invalid.
Aug 30 07:25:21 <peteru-home> maybe you need to getyourself a full copy of a known working flash.
Aug 30 07:27:42 <odoc> have you seen the log ?
Aug 30 07:27:57 <odoc> it boots like normal
Aug 30 07:28:04 <odoc> but when i attach a usb drive
Aug 30 07:28:06 <odoc> its all over
Aug 30 07:31:51 <NAiL> Am I the only one who can't resolve www.nslu2-linux.org?
Aug 30 07:31:58 <NAiL> ah, there it came
Aug 30 07:32:01 <NAiL> it took ages :P
Aug 30 07:32:12 <mcdmx> what's the best method for crosscompiling ipkg? is there a unslung makefile target?
Aug 30 07:43:58 <ka6sox-away> there is a master makefile with all the targets
Aug 30 07:44:15 <ka6sox-away> http://www.nslu2-linux.org/Makefile
Aug 30 07:44:54 <NAiL> ka6sox-away: what builds ipkg for nslu2 and wl500g?
Aug 30 07:45:11 <NAiL> ka6sox-away: mcdmx is trying to crosscompile ipkg to use it on the ds101g+
Aug 30 07:45:31 <NAiL> Currently, I'm using the ipkg.sh script on my ds101... Would be nice to use the binary instead
Aug 30 07:45:54 <ka6sox-away> optware-nslu2, optwart-wl500g
Aug 30 07:46:20 <CIA-8> 03koen 07org.openembedded.dev * rdeeec139... 10/packages/gaim/ (19 files in 2 dirs): gaim: update packages/gaim as per bug #273
Aug 30 07:46:23 <CIA-8> 03koen 07org.openembedded.dev * r57a2e56a... 10/packages/gpe-session-scripts/gpe-session-scripts_0.65.bb: gpe-session-scripts 0.65: fix patch URI, closes bug #275
Aug 30 07:46:30 <ka6sox-away> optware-nslu2 would be the target
Aug 30 07:46:59 <NAiL> ka6sox-away: yes, but what makefile builds the ipkg binary itself? 
Aug 30 07:47:00 <ka6sox-away> its also in the firmware image too.
Aug 30 07:47:20 <ka6sox-away> its in all the images
Aug 30 07:47:34 <NAiL> ka6sox-away: That won't help
Aug 30 07:47:35 <mcdmx> there's no  image yet for ds101*
Aug 30 07:47:47 <NAiL> the ds101g+ is PPC, not armeb or mipsel
Aug 30 07:47:56 <NAiL> so the images already done is useless
Aug 30 07:48:02 <ka6sox-away> build the openslug-image and extract the file from the tmp files
Aug 30 07:48:29 <ka6sox-away> wait...are we talking about g+ or just g?
Aug 30 07:48:39 <NAiL> g+... there is no g
Aug 30 07:48:48 <NAiL> there's one without a g
Aug 30 07:49:03 <ka6sox-away> what is the target arch that he wants it built for?
Aug 30 07:49:15 <NAiL> ppc
Aug 30 07:49:23 <NAiL> dunno the specifics :P
Aug 30 07:49:44 <NAiL> point is, we're both trying to figure out what actually builds it
Aug 30 07:50:19 <ka6sox-away> the native one is built by the -image targets and is included in them .
Aug 30 07:50:38 <ka6sox-away> there was also a ipkg in the feeds but that may have been removed.
Aug 30 07:50:50 <NAiL> aha
Aug 30 07:50:58 <NAiL> the latter is what I was looking for...
Aug 30 07:51:18 <ka6sox-away> you would have to change the target arch and rebuild the -images
Aug 30 07:51:29 <CIA-8> 03florian 07org.openembedded.dev * r0b1e74a1... 10/packages/gpe-session-scripts/gpe-session-scripts_0.65.bb: gpe-session-scripts: Fix typo.
Aug 30 07:51:31 <CIA-8> 03koen 07org.openembedded.dev * r80321922... 10/conf/distro/preferred-gpe-versions-2.7.inc: preferred-gpe-versions-2.7.inc: update gpe-login and gpe-session-scripts
Aug 30 07:51:46 <NAiL> We're trying to set up targets for both the ds101 and ds101g in the optware makefile
Aug 30 07:52:14 <ka6sox-away> I believe we removed the ipkg target because it broke things.
Aug 30 07:52:19 <NAiL> The ds101 target has a broken crosstool setup still, the ds101g is closer to actually working
Aug 30 07:52:36 <ka6sox-away> so I do know its in the -image
Aug 30 07:54:55 <ka6sox-away> NAiL, are you wanting to get it from optware instead of making it the OE way?
Aug 30 07:55:58 <NAiL> ka6sox-away: for the "unslung" type feed, yes
Aug 30 07:56:15 <NAiL> it's set up to use /opt and stuff already
Aug 30 07:56:32 <ka6sox-away> does synology already have ipkg?
Aug 30 07:56:51 <NAiL> no
Aug 30 07:58:51 <ka6sox-away> bb ipkg*
Aug 30 07:59:05 <ka6sox-away> after resetting the target and checking deps
Aug 30 08:00:00 <NAiL> I'm not using OE at all for that..
Aug 30 08:00:15 <NAiL> I'm trying to get it to compile cross with a different glibc and gcc 
Aug 30 08:00:38 <ka6sox-away> you would have to build another CrossTool chain
Aug 30 08:01:10 <mcdmx> at least for the g+ the toolchain is ready...
Aug 30 08:02:07 <mcdmx> i have a ipkg for the g+ but i built it using handhelds.org cvs... I hoped that there would be an easier way...
Aug 30 08:03:47 <ka6sox-away> mcdmx, until we establish a feed for g+ then it'll have to be manual.
Aug 30 08:04:24 <NAiL> ka6sox-away: The feed should be up shortly
Aug 30 08:04:28 <ka6sox-away> you could use the Makefile from optware for a template for building.
Aug 30 08:05:05 <NAiL> ka6sox-away: I have the changes (from mcdmx) to the optware Makefile needed to add ds101g target
Aug 30 08:05:21 <NAiL> but it doesn't build the ipkg stuff... it builds the toolchain and such
Aug 30 08:08:53 <CIA-8> 03orepvik * 10unslung/sources/crosstool/ (ds101-cross302.sh gcc-3.0.2-glibc-2.2.5.dat): Update binutils version for ds101 target
Aug 30 08:10:12 <CIA-8> 03orepvik * 10unslung/sources/crosstool/ (ds101g-cross334.sh powerpc-603e.dat): Added files needed for ds101g cross target
Aug 30 08:11:00 <mcdmx> NAiL: tnx
Aug 30 08:12:20 <mcdmx> I have fixed the optware dhcp makefile (invalid source url, no dhcpd.conf in /opt/etc). May I commit it?
Aug 30 08:12:59 <CIA-8> 03orepvik * 10unslung/make/crosstool.mk: Fix patches for ds101g target
Aug 30 08:14:06 <CIA-8> 03orepvik * 10unslung/Makefile: Add ds101g target to makefile
Aug 30 08:14:58 <NAiL> mcdmx: We should set you up with cvs write access
Aug 30 08:15:36 <mcdmx> NAiL: rwhitby already did this (despite my objections) ;-)
Aug 30 08:15:53 <NAiL> aha, then I see no reason why you should not commit it ;)
Aug 30 08:25:32 <CIA-8> 03mcdmx * 10unslung/make/dhcp.mk: fixed invalid source URL, include sample dhcpd.conf in .ipk
Aug 30 08:34:06 <mcdmx> NAiL: I'll try creating a make/ipkg.mk from scratch...
Aug 30 08:35:15 <NAiL> mcdmx: cool
Aug 30 08:35:35 <ka6sox-away> mcdmx, try to use the same version as in the slug so there is no confusion?
Aug 30 08:35:53 <mcdmx> ka6sox-away: what is the version?
Aug 30 08:36:26 <CIA-8> 03mickeyl 07org.openembedded.dev * rfaeb226f... 10/ (packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts .mt-attrs): pcmcia: ship dedicated ide.opts for borzoi
Aug 30 08:36:35 <ka6sox-away> hmm...let me check if I can
Aug 30 08:40:32 <ka6sox-away> ipkg_0.99.
Aug 30 08:40:48 <ka6sox-away> thats whats in OE
Aug 30 08:40:59 <ka6sox-away> (and built into the images)
Aug 30 08:41:33 <mcdmx> that's not precise enough... There are a lot of cvs tag containing 0.99: http://handhelds.org/cgi-bin/cvsweb.cgi/familiar/dist/ipkg/C/
Aug 30 08:42:10 <ka6sox-away> ipkg-0.99.148
Aug 30 08:42:20 <mcdmx> ok
Aug 30 08:42:25 <ka6sox-away> that is what is in Unslung-5.5Beta
Aug 30 08:47:43 <NAiL> heh
Aug 30 08:47:56 <NAiL> samba gets a SIGABRT on a broken symlink... neat
Aug 30 10:56:13 <CIA-8> 03koen 07org.openembedded.dev * r1c3f5d84... 10/packages/tslib/ (tslib/ts.conf-h2200 tslib_cvs.bb): tslib: change ts.conf-h2200 to use module_raw for h2200 to include it in the calibration, bump PR
Aug 30 11:04:47 <odoc> as soon as i use the usb interface of my slug 
Aug 30 11:04:50 <odoc> it seg-fauls
Aug 30 11:04:58 <odoc> with unslung and with openlug
Aug 30 11:05:06 <odoc> stock linksys-fw doesn't even boot
Aug 30 11:05:38 <odoc> since sercomm seems to validate the flashed area i don't expect a broken flash
Aug 30 11:05:43 <odoc> any hints ?
Aug 30 11:06:13 <CIA-8> 03mickeyl 07org.openembedded.dev * rbf33034c... 10/conf/machine/zaurus-clamshell-2.6.conf: zaurus-clamshell-2.6.conf: revert accidant commit that outcommented several modules
Aug 30 11:31:12 <peteru-home> odoc: Inspect the board for shorted or damaged traces/pins. This really does sounds like a hardware issue.
Aug 30 11:31:38 <peteru-home> you said you always had issues with that slug, right?
Aug 30 11:37:16 <odoc> yes
Aug 30 11:37:44 <odoc> but i sorted out that these are real issues after adding serial
Aug 30 11:38:13 <odoc> maybe damaged ram ?
Aug 30 11:39:35 <peteru-home> Hard to tell. Probably easiest to just get a new slug :(
Aug 30 11:40:21 * peteru-home is off to bed - it's almost 5am again :-O
Aug 30 11:40:32 <odoc> already got a new one
Aug 30 11:40:41 <odoc> but the "old" one is only about one montg
Aug 30 11:40:42 <odoc> h
Aug 30 11:40:47 <odoc> anyway ... gn8
Aug 30 11:41:40 <CIA-8> 03justinp 07org.openembedded.dev * r8457b71b... 10/packages/musicpd/ (glurp_0.11.3.bb glurp_0.11.6.bb): glurp: update version, switch to SF mirror
Aug 30 12:26:13 <CIA-8> 03rpurdie 07org.openembedded.dev * r6332ba3a... 10/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb: linux-oz-2.6: Update detection routines to correctly detect corgi and shepherd. Very nasty to get this wrongMT: ----------------------------------------------------------------------
Aug 30 12:50:30 <CIA-8> 03jp30 * 10unslung/Makefile: force PATH to a working value when native building on an nslu2; re-promote asterisk
Aug 30 14:06:18 <CIA-8> 03hrw 07org.openembedded.dev * r080cfc56... 10/conf/machine/zaurus-clamshell-2.6.conf: fixed typo in conf/zaurus-clamshell-2.6.conf
Aug 30 14:06:21 <CIA-8> 03hrw 07org.openembedded.dev * r0cce57df... 10/packages/ttf-fonts/ttf-dejavu_1.13-20050820.bb: ttf-dejavu: archive mirrored on my account on handhelds.org - close bug#272
Aug 30 14:06:23 <CIA-8> 03koen 07org.openembedded.dev * r8fc2532e... 10/packages/gpesyncd/gpesyncd_cvs.bb: 
Aug 30 14:06:23 <CIA-8> gpesyncd: add cvs version of gpesyncd till it sees a release
Aug 30 14:06:23 <CIA-8> NOTE: it needs libmimedir_cvs, but OE doesn't have a clean way to specify that
Aug 30 14:06:23 <CIA-8> ~lart OE
Aug 30 14:06:24 * jbot farts in OE's general direction
Aug 30 14:08:01 <NAiL> heh
Aug 30 14:11:09 <CIA-8> 03nail 07org.openembedded.dev * r7241b1d9... 10/packages/postfix/postfix_2.0.20.bb: Fix hardcoded paths, and create dirs in image before trying to copy files there
Aug 30 14:26:38 <NAiL> ok, does reiser4progs fail for anyone else?
Aug 30 14:29:55 <NAiL> nm.. didn't happen twice... odd
Aug 30 14:44:02 <NAiL> weather ~enva
Aug 30 15:06:13 <CIA-8> 03nail 07org.openembedded.dev * r104db762... 10/packages/wakelan/wakelan_1.1.bb: Fix hardcoded path trying to set permissions on /usr/bin/
Aug 30 15:47:45 <peteru-home> ~weather YSSD
Aug 30 15:47:50 <jbot> I can't find station code "YSSD" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes).
Aug 30 15:48:33 <NAiL> ~weather enva
Aug 30 15:48:38 <jbot> Trondheim / Vaernes, Norway; (ENVA) 63-28N 010-56E 17M; last updated: 2005.08.30 1620 UTC; Dew Point: 48 F (9 C); Pressure (altimeter): 30.12 in. Hg (1020 hPa); Relative Humidity: 87%; Sky conditions: mostly cloudy; Visibility: 4 mile(s); Weather: 51 F (11 C); Wind: from the W (270 degrees) at 18 MPH (16 KT)
Aug 30 15:50:38 <peteru-home> ~weather YSSY
Aug 30 15:50:42 <jbot> Sydney Airport, Australia; (YSSY) 33-57S 151-11E 3M; last updated: 2005.08.30 1700 UTC; Dew Point: 53 F (12 C); Pressure (altimeter): 29.83 in. Hg (1010 hPa); Relative Humidity: 67%; Temperature: 64 F (18 C); Visibility: greater than 7 mile(s); Wind: from the NNE (030 degrees) at 17 MPH (15 KT)
Aug 30 15:53:11 <peteru-home> Nice, already at 18 C before 9am and it's middle of winter.
Aug 30 16:51:10 <CIA-8> 03nail 07org.openembedded.dev * r13c59a81... 10/packages/bluez-utils/bluez-utils-common_2.18.inc: Add support for the broadcom firmware loader
Aug 30 16:56:06 <CIA-8> 03nail 07org.openembedded.dev * rcde1c3e7... 10/packages/linux/openslug-kernel-2.6.12.2/defconfig: Add broadcom bluetooth module to openslug-kernel
Aug 30 16:56:09 <CIA-8> 03nail 07org.openembedded.dev * ra13ce7ef... 10/packages/linux/nslu2-kernel_2.6.12.2.bb: Bump PR
Aug 30 16:56:31 <rwhitby-away> NAiL: nice
Aug 30 17:00:03 <NAiL> It's not working quite yet though.. Still got problems loading the darn firmware
Aug 30 17:03:02 <conradl> rwhitby i expect to have the unit in my hand after three pm 
**** ENDING LOGGING AT Tue Aug 30 19:27:42 2005

**** BEGIN LOGGING AT Tue Aug 30 19:27:42 2005
**** ENDING LOGGING AT Tue Aug 30 19:28:05 2005

**** BEGIN LOGGING AT Tue Aug 30 19:28:34 2005
**** ENDING LOGGING AT Tue Aug 30 19:36:34 2005

**** BEGIN LOGGING AT Tue Aug 30 19:36:34 2005
**** BEGIN LOGGING AT Tue Aug 30 21:02:13 2005
Aug 31 00:10:33 <cbpage>  /ping cpage
Aug 31 00:10:36 <cbpage> oops
Aug 31 01:33:01 <rwhitby-away> conradl: got the unit?
Aug 31 02:43:36 <conradl> rwitby-away yip its nice.
**** ENDING LOGGING AT Wed Aug 31 02:59:56 2005