**** BEGIN LOGGING AT Fri Oct 28 02:59:59 2005 Oct 28 03:00:36 Yes... I'm going to check what I have (following RMK/Lennert comments) in to CVS for review, I haven't fixed the "/" in the path names yet, but that's better to do at the end. Oct 28 03:03:05 03jbowler * 10kernel/2.6.14/ (10-ixp4xx-copy-from.patch 50-nslu2-arch.patch): l-a-k comments incorporated Oct 28 03:04:25 That has the reset->ctrl_alt_del change, I'm not sure about that. I think all the formatting is fixed. Oct 28 03:05:00 time for bed... Oct 28 03:06:03 jbowler-zzz: thx. It's great that you and dwery are persisting on the upstream push! Oct 28 03:22:42 03rwhitby * 10slugimage/slugimage: Fixed the fixed size jffs2 partition support. Oct 28 03:23:33 03rwhitby * 10kernel/2.6.14/defconfig: Added a missing Debian config (no-op for virgin kernel). Oct 28 03:25:02 03rwhitby * 10debian/ (4 files in 3 dirs): Updated for the real 2.6.14 release Oct 28 03:26:24 jbowler-zzz: my OpenSlug build picked up the correct version of the kernel Oct 28 03:26:49 oh, hang on, I might have cleaned that last night Oct 28 03:27:50 Hello there Oct 28 03:28:51 g'day Oct 28 03:29:07 Hello rwhitby Oct 28 03:30:01 can you give me a little bit support configuring the mailserver on unslung? Oct 28 03:30:33 probably not. I've never configured any of the mailservers in unslung. Oct 28 03:31:11 but someone else here might be able to, so the best thing is always to just ask the specific question and see if someone responds. Oct 28 03:33:44 thank you for the hint Oct 28 03:36:43 i dont know how to setup the smtp server so that mails can be transfered into my mailbox ( I followed the instructions in the HowToSetupAnEmailServer ) Oct 28 03:37:10 conradl: find any nas100d's in Australia yet ? ;-) Oct 28 03:37:21 nope not yet Oct 28 03:37:52 tech pac make me ill Oct 28 03:38:19 still waiting for BT gps! Oct 28 03:39:40 hmmm seems like nobody is able to help me dealing with my mailserver.... ok so i wish you guys a nice day Oct 28 07:05:15 jbowler-zzz: thanks a lot for your work! it seems lak is now propewrly discussing the thing.. i'm happy! i wish i wasn't so busy in those days.. Oct 28 07:37:02 03rwhitby * 10debian/Makefile: Set the subarch and version in the stand-alone kernel build too. Oct 28 07:51:43 ~weather enva Oct 28 07:51:46 Trondheim / Vaernes, Norway; (ENVA) 63-28N 010-56E 17M; last updated: 2005.10.28 1420 UTC; Dew Point: 42 F (6 C); Pressure (altimeter): 29.71 in. Hg (1006 hPa); Relative Humidity: 54%; Temperature: 59 F (15 C); Visibility: greater than 7 mile(s); Wind: from the SSE (160 degrees) at 20 MPH (17 KT) gusting to 35 MPH (30 KT) (direction variable) Oct 28 07:52:20 * NAiL notes that it is the end of October. Close to the arctic circle. And it's 15C outside... Oct 28 07:53:11 ~weather eddi Oct 28 07:53:14 Berlin-Tempelhof, Germany; (EDDI) 52-28N 013-24E 49M; last updated: 2005.10.28 1420 UTC; Dew Point: 50 F (10 C); Pressure (altimeter): 30.21 in. Hg (1023 hPa); Relative Humidity: 63%; Temperature: 62 F (17 C); Visibility: greater than 7 mile(s); Wind: from the ESE (120 degrees) at 13 MPH (11 KT) Oct 28 07:53:25 it's crazy... Oct 28 07:53:56 It was 17C earlier today... And Trondheim is a lot further north than Berlin ;-) Oct 28 07:54:35 * NAiL blames it on the bad weather on the other side of the pond Oct 28 07:54:54 By this time of year, we usually have atleast a little bit snow Oct 28 07:57:14 forecast for the weekend, it should be around 20 degrees C Oct 28 07:57:32 hehe Oct 28 07:58:15 maybe the last chance for visiting a beergarden Oct 28 07:58:26 this year Oct 28 07:58:53 Some friends of mine have a bbq :p Oct 28 10:15:26 ~weather limf Oct 28 10:15:30 Torino / Caselle, Italy; (LIMF) 45-13N 007-39E 287M; last updated: 2005.10.28 1620 UTC; Dew Point: 46 F (8 C); Pressure (altimeter): 30.21 in. Hg (1023 hPa); Relative Humidity: 58%; Sky conditions: clear; Temperature: 60 F (16 C); Visibility: 2 mile(s); Weather: Mist; Wind: from the SW (230 degrees) at 5 MPH (4 KT) Oct 28 10:19:50 dwery it is better in nl Oct 28 10:19:55 ~weather eheh Oct 28 10:19:58 Eindhoven, Netherlands; (EHEH) 51-27N 005-25E 28M; last updated: 2005.10.28 1625 UTC; Dew Point: 57 F (14 C); Pressure (altimeter): 29.97 in. Hg (1015 hPa); Relative Humidity: 72%; Sky conditions: mostly cloudy; Temperature: 66 F (19 C); Visibility: greater than 7 mile(s); Wind: from the S (170 degrees) at 7 MPH (6 KT) Oct 28 10:19:59 :) Oct 28 11:01:29 <[g2]> dwery and jbowler thx a lot for all the upstream kernel work Oct 28 11:01:43 <[g2]> dwery so of the stuff you pushed is in 2.6.14 Oct 28 11:02:52 <[g2]> ~weather rdu Oct 28 11:02:55 I can't find station code "RDU" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Oct 28 11:04:29 <[g2]> ~weather krdu Oct 28 11:04:32 Raleigh / Durham, Raleigh-Durham International Airport, NC, United States; (KRDU) 35-52-14N 078-47-11W 130M; last updated: 2005.10.28 1751 UTC; Dew Point: 37.0 F (2.8 C); Pressure (altimeter): 30.24 in. Hg (1024 hPa); Pressure tendency: 0.03 inches (1.0 hPa) lower than three hours ago; Relative Humidity: 48%; Sky conditions: mostly cloudy; Temperature: 55.9 F ... Oct 28 12:08:57 * eddyp observes that the FAQ page is empty Oct 28 13:56:01 do I need to have openfirmware to install debonaras? Oct 28 13:56:17 can't I do it from unslun?g Oct 28 13:56:45 and then flash the firmware? Oct 28 14:03:55 eddyp: debonaras is a project, not a distro Oct 28 14:04:31 err, s/debonaras/debian/ :-D Oct 28 14:04:42 if you're referring to the arm or armeb ports of debian to the nslu2, then neither of them have been tested against the unslung kernel, and I expect that there would be subtle and annoying problems in doing so Oct 28 14:05:57 rwhitby: I don't intend to run the port with unslung kernel, just install, and then put the openslug firware Oct 28 14:06:58 why do it that way rather than just installing openslug first? Oct 28 14:08:26 I have a running nslu that should not go down for too much time... Oct 28 14:09:01 I would need to port the configs to the debian system as fast as possible Oct 28 14:09:44 eddyp, sounds risky to me. you might do better to buy a second slug Oct 28 14:10:35 jp30-work: well, I bought this with lots of efforts, there was no dealer in Romania... Oct 28 14:36:58 [g2]: i think in .14 we only have the gpio fix Oct 28 14:37:34 dwery: a foot in the door :-) Oct 28 14:37:44 rwhitby: yep :) Oct 28 14:37:52 at least there;s discussion ongoing Oct 28 14:39:14 dwery: I see good discussion and convergence towards things being accepted upstream. I'm very glad that you and jbowler accept the upstream critique in a constructive manner. Oct 28 14:39:42 well.. jbowler is doing the work Oct 28 14:39:48 i;'m just observing now :) Oct 28 14:43:56 dwery: I can't get arch_reset to work from an interrupt handler (i.e. if I call it from the reset button handler), the attempt to write to the flash fails, and even an attempt to set IXP4XX_FLASH_WRITABLE fails (hang) - any ideas? Oct 28 14:44:21 mm. tasklets or workqueues Oct 28 14:44:37 ? Oct 28 14:56:03 It's a straight hang - I would like to put in emergency_restart() since that seems both much more useful and more inkeeping with what the kernel does, but it calls arch_reset (eventually) and that hangs - while it works perfectly well from a non-interrupt reboot. Oct 28 14:57:43 well... i'd ask russel then :) Oct 28 14:58:22 Yes... I think I'll just leave it with power_off and ask later when all this stuff is in the kernel... Oct 28 14:58:29 This hangs: *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; Oct 28 14:58:48 Several lines later this is fine: *IXP4XX_OSWK = IXP4XX_WDT_KEY; Oct 28 14:59:20 And I find this out by toggling the LEDs: *IXP4XX_GPIO_GPOUTR |= DISK2_OFF; Oct 28 14:59:28 So that works too... Oct 28 15:01:47 yep.. working when the code is mainstream is easier :) Oct 28 15:02:16 And someone will probably say "this code is broken you idiot, you should do this..." Oct 28 15:02:24 Which would make everything much easier. Oct 28 15:03:03 :D :D Oct 28 15:04:49 Found it, I think, I'm using the darned virtual address... Oct 28 15:21:57 ach! Oct 28 15:22:16 that won't probably work in that environment, right? Oct 28 15:24:10 Just testing... Oct 28 15:24:26 (But the GPIO lines do use virtual addresses and they work) Oct 28 15:25:51 what's 28-spinlock-up.patch all about? Oct 28 15:26:12 It fixes a compile break in mm1 Oct 28 15:26:40 The physical address doesn't work in the normal case - I'm going to give up on this and just leave it as poweroff... Oct 28 15:27:26 ok Oct 28 15:29:42 dwery: check PM Oct 28 15:50:50 dwery is now part of the nslu2-linux core team. congrats dwery! Oct 28 15:51:23 thanks! Oct 28 16:27:41 jbowler: great email, simply great! Oct 28 17:12:49 x1205 is in git! Oct 28 17:14:40 woohoo! Oct 28 17:15:07 congrats dwery - is that your first patch to make it there? Oct 28 17:15:48 umm.. not.. i think the gpio one liner was the first one :) (exluding the work i did years ago on other drivers...) Oct 28 17:23:30 'good night all Oct 28 18:41:05 03jbowler 07org.openembedded.dev * rd59b05a4... 10/packages/linux/nslu2-kernel/2.6.14/10-ixp4xx-copy-from.patch: nslu2-kernel: comment update, no change to 2.6.14 Oct 28 18:41:08 03jbowler 07org.openembedded.dev * r5de60fa1... 10/packages/linux/ (2 files in 2 dirs): nslu2-kernel: patch format, nslu2-power now uses ctrl-alt-del in 2.6.14 Oct 29 01:31:03 03noodles 07org.openembedded.dev * r8d8fd891... 10/packages/ppp/ (ppp-2.4.3/enable-ipv6.patch ppp_2.4.3.bb): ppp-2.4.3: Enable IPv6 support. Oct 29 02:11:28 03noodles 07org.openembedded.dev * r9117a5cd... 10/packages/net-snmp/ (files/uclibc-fix.patch net-snmp_5.1.2.bb): net-snmp: Fix up compilation with uclibc. **** ENDING LOGGING AT Sat Oct 29 03:00:00 2005