**** BEGIN LOGGING AT Mon Jan 23 02:59:58 2006 Jan 23 14:25:29 03bzhou * 10unslung/ (Makefile make/librsync.mk make/py-rdiff-backup.mk): librsync and py-rdiff-backup ready for cross test Jan 23 14:31:29 Hi Jan 23 14:32:13 hi Jan 23 14:32:20 I'm attempting to build monotone .25 as per the instruction on the wiki Jan 23 14:32:49 you know you only need 0.24 at the moment ... Jan 23 14:32:57 Building fails quite a way into it. Jan 23 14:33:09 Then the wiki is ahead of itself! Jan 23 14:33:23 It appears that I'm running out of memory. Jan 23 14:33:55 The last few lines on the serial console are: Jan 23 14:33:56 Swap cache: add 7687508, delete 7687508, find 370385/1457217, race 0+0 Jan 23 14:33:56 Free swap = 0kB Jan 23 14:33:56 Total swap = 56216kB Jan 23 14:33:56 Out of Memory: Killed process 1069 (cc1plus). Jan 23 14:34:41 52MB of swap is not that much Jan 23 14:34:54 I usually give it a gig :-) Jan 23 14:34:59 I'd *really* rather not have to repartition and reinstall Jan 23 14:35:15 just install 0.24 pre-built from somewhere Jan 23 14:36:12 Is there an ipkg? Jan 23 14:36:15 rwhitby isn't there a possibility to use a swap *file* ? Jan 23 14:36:36 EvilDevil: probably. I've never tested that Jan 23 14:36:42 Uhhhh. WHy didn't *I* think of that!!! :P Jan 23 14:36:59 hyperk i found none ;-) Jan 23 14:37:16 I gues I could mount the disk on an intel box and use fitz or the like Jan 23 14:37:35 *sigh* Jan 23 14:37:36 http://www.redhat.com/docs/manuals/linux/RHL-8.0-Manual/custom-guide/s1-swap-adding.html Jan 23 14:37:46 Who knew such a little box could be such a pig. Jan 23 14:38:18 hyperk: that's why we cross-compile where at all possible, including monotone Jan 23 14:39:02 Tried those docs, but they're all distro dependant. I'm running slackware, which isn't represented. Jan 23 14:39:46 hyperk there's a list of packages you need to build the cross-c. env. Jan 23 14:40:10 hyperk: you can't just install a .deb or .rpm ? Jan 23 14:40:37 slackware uses .tgz afaik Jan 23 14:40:56 I guess I could run alien on one of those,a nd convert it to a .tgz Jan 23 14:41:01 sounds almost as painful as gentoo ;-) Jan 23 14:41:28 With any luck, most of the dependancies will be there. Jan 23 14:41:51 hyperk that's going to be the problem ... Jan 23 15:05:15 Howdy. Jan 23 15:10:14 yeeehaaa **** BEGIN LOGGING AT Mon Jan 23 18:53:52 2006 Jan 23 19:02:02 Hi all. Jan 23 19:03:02 I'm (attempting to) build the crosscompile environment under slackware. Jan 23 19:03:21 I see that the wiki recommends that I don't do this as root. Jan 23 19:04:05 I'm wondering which components need to be installed as root, and which as a regular user. Jan 23 19:05:13 I'm about to build boost. Isn't the install process going to want to write to privileged parts of the disk? Jan 23 19:19:46 . Jan 23 19:27:18 Should boost and monotone be installed system wide? Will they interfere with other development tools? Jan 23 20:08:18 hello Jan 23 20:10:29 anybody here have luck with debain? Jan 23 20:10:52 <[g2]> hi sunfish Jan 23 20:10:57 hi Jan 23 20:11:17 <[g2]> looking to run debian ? Jan 23 20:11:39 im trying to figure out if the endian issue is also a performance penalty Jan 23 20:11:49 any insight? Jan 23 20:12:12 <[g2]> I think it may be a wash Jan 23 20:12:47 <[g2]> as the IXP42x has NPE running the network processing and probably handling the byte switching Jan 23 20:12:50 what ""distro" are you running g2 Jan 23 20:12:56 <[g2]> heh Jan 23 20:13:12 <[g2]> I make my own hardware :) Jan 23 20:13:39 <[g2]> I'm running Debian BE/LE and I'm building a kernel in a Gentoo Stage 3 for LE Jan 23 20:14:04 <[g2]> I've got a board with a 533MHz IXP425 and 64MB on board Jan 23 20:14:21 <[g2]> actually I have about 18 :) Jan 23 20:14:30 <[g2]> and 100 more are being built Jan 23 20:14:39 interesting, does alot of non nslu2 xscale work get done in this channel? Jan 23 20:15:15 <[g2]> #debian-arm would be for ARM related Jan 23 20:15:25 <[g2]> there's the optware stuff that runs on MIPS Jan 23 20:15:58 <[g2]> so ppl are playing a little / working with PPC Jan 23 20:16:44 well i just picked up a slug a few days ago, un-underclocked it, prob going to throw debian on it Jan 23 20:16:55 <[g2]> cool. Jan 23 20:17:12 <[g2]> what do you want to use it for ? Jan 23 20:17:42 i would like to use it as a router as i only have 3 machines, if its upto the task Jan 23 20:18:37 <[g2]> routing how ? Jan 23 20:18:54 3 machines to the internet Jan 23 20:19:10 <[g2]> you mean masq ? Jan 23 20:19:26 NAT Jan 23 20:19:30 same thing Jan 23 20:19:45 <[g2]> one IP and NATing and MASQ'ing the machines behind it Jan 23 20:20:03 <[g2]> are you planning on doing much filtering ? Jan 23 20:20:17 yes, i have a licksys usb ethernet adapter Jan 23 20:20:19 naa Jan 23 20:20:32 my iptables config is fairly simple Jan 23 20:20:37 block everything lol Jan 23 20:20:50 <[g2]> you probably didn't even need to properly clock it :) Jan 23 20:20:57 *linksys Jan 23 20:21:08 <[g2]> heh Jan 23 20:21:32 disk IO is a little bit of a letdown Jan 23 20:21:45 I hope nic IO is better Jan 23 20:21:56 <[g2]> I was doing line rate 100Mbs bridging on my box with only 40% CPU (big SCP files going through) Jan 23 20:22:23 <[g2]> disk I/O with which OS ? Jan 23 20:22:36 stock firmware Jan 23 20:22:40 <[g2]> ahh Jan 23 20:23:04 <[g2]> do you have a specific rate in mind ? Jan 23 20:23:13 i have a usb drive comming wed. so ive just been playing with a 128mb usb key till then Jan 23 20:23:40 do i have a specific rate? Jan 23 20:23:49 <[g2]> many USB sticks are pretty fast. Yeah Jan 23 20:25:15 as long as i get 8ish MB/s between computers i will be happy Jan 23 20:25:50 <[g2]> via what protocol ? Jan 23 20:26:10 <[g2]> SCP, FTP, HTTP, NFS , Other ? Jan 23 20:26:38 smb Jan 23 20:26:44 shouldnt matter to the NAS Jan 23 20:26:49 its only routing it Jan 23 20:28:25 <[g2]> heh Jan 23 20:36:46 what boards do you have that are 533mhz? Jan 23 20:55:06 this place is bumping Jan 23 20:56:38 <[g2]> heh Jan 23 20:56:44 <[g2]> They are call the Loft Jan 23 20:57:32 <[g2]> it's an IXP425 running at 533MHz with 64MB and lots of other stuff like miniPCI, dual Ethernet, POE, JTAG, serial .... Jan 23 20:57:44 <[g2]> http://www.giantshoulderinc.com Jan 23 20:57:50 <[g2]> http://www.giantshoulderinc.com/hw-4533 Jan 23 20:57:58 <[g2]> http://www.giantshoulderinc.com/ab3/case.jpg Jan 23 20:59:20 looks like a nice little board Jan 23 21:00:50 <[g2]> Oh... it's _so_ sweet Jan 23 21:01:04 <[g2]> I haven't touched may slugs in months Jan 23 23:51:34 03bzhou * 10unslung/make/ipython.mk: ipython upstream upgrade from 0.7.0 to 0.7.1 Jan 24 00:19:18 anone still up? Jan 24 00:19:22 anyone Jan 24 01:46:24 hello **** ENDING LOGGING AT Tue Jan 24 03:00:00 2006