**** BEGIN LOGGING AT Tue Aug 01 02:59:56 2006 Aug 01 04:17:27 03bzhou * r3696 10optware/trunk/make/gnupg.mk: gnupg: corrected zlib dependency, bump IPK_VERSION Aug 01 08:02:55 03oleo * r3697 10optware/trunk/ (4 files in 2 dirs): gift: drop perl dependecy, startup scripts and setup check Aug 01 11:17:22 03oleo * r3698 10optware/trunk/sources/buildroot/uClibc.config-locale.patch: buildroot: build static ldconfig - this will enable coexistance of wl500g and uclibc packages if new uclibc libs are moved to other dir to prevent name clash Aug 01 12:58:38 03marcusb * r53 10debian/ixp400-accesslib/trunk/ixp400-accesslib/debian/ (8 files in 2 dirs): Microcode loading support. Aug 01 12:59:30 03marcusb * r54 10debian/ixp400-accesslib/trunk/ixp400-accesslib/debian/ (2 files): Rename. Aug 01 13:23:55 03marcusb * r55 10debian/ixp400-accesslib/trunk/ixp400-accesslib/debian/rules: Add missing dh_install* calls. Aug 01 13:31:56 03marcusb * r56 10debian/ixp400-accesslib/trunk/ixp400-accesslib/debian/rules: Add needed debian/ files to module source archive. Aug 01 15:56:40 03marcusb * r57 10debian/ixp400-accesslib/trunk/ixp400-accesslib/debian/ (6 files): Correct filenames for module-assistant. Aug 01 17:44:14 03gda * r3699 10optware/trunk/make/perl.mk: perl: cross build for ds101g, next try Aug 01 17:48:22 Is php-cli available for DebianSlug? Aug 01 22:08:00 03oleo * r3700 10optware/trunk/ (make/ipkg.mk sources/ipkg/ipkg_download.c.patch): ipkg: upstream upgrade to 0.99-163 - added support for uclibc targets Aug 01 22:08:19 Hi Aug 01 22:09:43 03oleo * r3701 10optware/trunk/Makefile: optware: add ipkg to list of specific packages for uclibc Aug 01 22:23:35 hey Aug 01 22:29:23 is anyone here using php-apache with openslug? i have httpd running with the php5 module loaded (from /var/log/apache/error_log: [Wed Aug 02 00:42:07 2006] [notice] Apache/2.0.54 (Unix) mod_ssl/2.0.54 OpenSSL/0.9.7g DAV/2 PHP/5.1.4 configured -- resuming normal operations). the problem is that apache server html correctly but does not interpret php files at all. Aug 01 22:30:47 it just displays the source. the php file is executable. Aug 01 22:31:44 typo - apache serveS html correctly Aug 01 22:36:01 then it's not filtering the source through php Aug 01 22:36:21 there's a couple of lines needed in apache.conf (or whatever that config file is called) Aug 01 22:36:22 yes... Aug 01 22:36:40 i added the line that loads /opt/libexec/libphp5.so Aug 01 22:36:53 it doesn't seem to raise an error Aug 01 22:36:57 you need to add one that adds the .php extention too Aug 01 22:37:30 something like AddType application/x-httpd-php .php .php3 .php4 .phtml Aug 01 22:37:44 also, possibly DirectoryIndex index.php index.php4 index.php3 index.cgi index.html index.htm Aug 01 22:38:42 hmmm... yes, makes sense... i'm checking httpd.conf right now Aug 01 22:38:59 such lines do exist, but no php there, you must be right Aug 01 22:39:00 if you get it to work, make sure to update the wiki ;) Aug 01 22:39:39 i will... Aug 01 22:43:00 i will. Aug 01 22:43:07 it works perfectly :) Aug 01 22:43:48 i just had to paste your AddType line. thanks a lot! Aug 01 22:44:15 np Aug 01 22:45:40 i'll have a few other things to add to the wiki... it suggests to install an apache package that ipkg doesn't want to install, even once downloaded locally... Aug 01 22:45:54 i was able to use another from another repository. Aug 01 22:46:34 some files seem to be missing on the regular openslug repository. you can't just go ipkg install php-apache. Aug 02 00:19:17 w00t Aug 02 00:19:58 skipped the prism and atheros wlan usb chipset and bought a 20 euro zd1211b wlan stick Aug 02 00:20:32 crosscompiled debslug, flashed, currently debootsrapping Aug 02 00:21:07 just to let u know how far i got since last week ;) Aug 02 00:24:25 good ;) Aug 02 00:24:50 now, if I can get my ubuntu box online with a zd1211 stick, I'll even update the zd1211 driver Aug 02 00:25:47 ;-) Aug 02 00:28:24 hrhr ubuntu on slug *g* Aug 02 00:28:46 got xserver running? *lol* Aug 02 00:29:11 haha Aug 02 00:29:11 no Aug 02 00:29:29 Trying to get ubuntu running on my amd64 Aug 02 00:29:37 which has proven to be a proper pain in the a** Aug 02 00:31:03 oha Aug 02 00:31:25 yeah x64 support seems everywhere a bit broken *G* Aug 02 00:31:46 unfortunately, yes Aug 02 00:32:52 hmm this debootstrapping on slug really takes time *roll another one* Aug 02 00:33:42 and filecabi.net is entertaining anyway Aug 02 00:33:58 and too hot to sleep anyway Aug 02 00:34:04 same here Aug 02 00:34:24 I'm a bit closer to the arctic circle though ;) Aug 02 00:34:58 ~weather enva Aug 02 00:35:02 Trondheim / Vaernes, Norway; (ENVA) 63-28N 010-56E 17M; last updated: 2006.08.01 2150 UTC; Dew Point: 53 F (12 C); Pressure (altimeter): 29.68 in. Hg (1005 hPa); Relative Humidity: 72%; Temperature: 62 F (17 C); Visibility: greater than 7 mile(s); Wind: from the E (090 degrees) at 7 MPH (6 KT) Aug 02 00:37:41 grr and this wlan link seems dropping again Aug 02 00:38:02 ~weather Aug 02 00:38:06 ~weather berlin Aug 02 00:38:09 I can't find station code "BERLIN" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Aug 02 00:39:08 ~weather 10389 Aug 02 00:39:11 I can't find station code "10389" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Aug 02 00:39:59 ~weather EDDB Aug 02 00:40:01 ~weather eddt Aug 02 00:40:05 Berlin-Schoenefeld, Germany; (EDDB) 52-23N 013-31E 50M; last updated: 2006.08.02 0020 UTC; Dew Point: 55 F (13 C); Pressure (altimeter): 29.65 in. Hg (1004 hPa); Relative Humidity: 72%; Sky conditions: mostly cloudy; Temperature: 64 F (18 C); Visibility: greater than 7 mile(s); Wind: from the WSW (250 degrees) at 9 MPH (8 KT) Aug 02 00:40:09 Berlin-Tegel, Germany; (EDDT) 52-34N 013-19E 37M; last updated: 2006.08.02 0020 UTC; Dew Point: 57 F (14 C); Pressure (altimeter): 29.65 in. Hg (1004 hPa); Relative Humidity: 77%; Sky conditions: mostly cloudy; Temperature: 64 F (18 C); Visibility: greater than 7 mile(s); Weather: Light rain; Wind: from the W (280 degrees) at 10 MPH (9 KT) Aug 02 00:40:14 yeah ;) Aug 02 00:40:36 'bout 1C warmer way down there ;-) Aug 02 00:40:55 hehe Aug 02 00:41:12 its cooling down since yesterday, had a little rain just half an hour ago Aug 02 00:41:32 but the first below 22 degree night since 3 weeks or so Aug 02 00:49:31 ~weather ord Aug 02 00:49:34 I can't find station code "ORD" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Aug 02 00:50:23 I never remember that code... Aug 02 00:51:08 ~weather KORD Aug 02 00:51:13 Chicago, Chicago-O'Hare International Airport, IL, United States; (KORD) 41-58-47N 087-54-16W 200M; last updated: 2006.08.02 0051 UTC; Dew Point: 73.9 F (23.3 C); Heat index: 100.2 F (37.9 C); Pressure (altimeter): 29.89 in. Hg (1012 hPa); Relative Humidity: 57%; Sky conditions: partly cloudy; Temperature: 91.0 F (32.8 C); Visibility: 10 mile(s); Wind: from the SW ... Aug 02 00:51:48 A bit warmer :) Good to have air conditioning... Aug 02 01:18:19 03bzhou * r3702 10optware/trunk/make/py-django.mk: py-django: upstream upgrade to 0.95 Aug 02 01:32:55 which 2.6 kernel dist does not _require_ external storage? Aug 02 01:35:49 hmm Aug 02 01:36:26 openslug, debianslug (without debian), ucslugc Aug 02 01:36:39 justz dont debootstrap it Aug 02 01:36:41 of course, the practical uses are limited by flash space Aug 02 01:37:05 use the flashimage you build crosscompiled Aug 02 01:37:19 ucslugc leaves the most space free, by using uclibc and thumb and leaving out quite a few modules Aug 02 01:39:00 ucslugc sounds good but I want to be able to compile almost anything there. I suspect uclibc might inhibit that a bit Aug 02 01:39:11 yeah Aug 02 01:39:18 the best bet then would be debianslug Aug 02 01:39:23 ok Aug 02 01:39:30 less endianness-problems than openslug Aug 02 01:40:01 * NAiL goes to bed Aug 02 01:40:14 if I add stuff, I guess I might get to a point where I _need_ external storage, regardless of what services I actually run? Aug 02 01:40:56 or can I have a very minimal / and /usr, and perhaps only mount bits under /user as req'd Aug 02 01:41:04 (I'm not really a debian person) Aug 02 01:41:17 anyway, I'll go the debianslug route .. Aug 02 01:41:39 ~weather sydney Aug 02 01:41:43 I can't find station code "SYDNEY" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Aug 02 01:44:17 hey gcj-arm exists. coolies Aug 02 01:44:48 ~weather YSSY Aug 02 01:44:51 Sydney Airport, Australia; (YSSY) 33-57S 151-11E 3M; last updated: 2006.08.02 0130 UTC; Dew Point: 39 F (4 C); Pressure (altimeter): 30.03 in. Hg (1017 hPa); Relative Humidity: 54%; Sky conditions: mostly cloudy; Temperature: 55 F (13 C); Visibility: greater than 7 mile(s); Wind: from the W (280 degrees) at 9 MPH (8 KT) Aug 02 01:45:34 ~weather 94768 Aug 02 01:45:38 I can't find station code "94768" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Aug 02 02:08:14 hmm Aug 02 02:08:28 lsmod closed the ssh session Aug 02 02:08:38 modprobe zd1211b worked Aug 02 02:08:44 reboot ing now Aug 02 02:14:04 toniq: check for alignment issues with the zd1211b -- I'd be curious to see what you observe. Aug 02 02:14:23 i loaded it right after reboot Aug 02 02:15:00 seems that no command was found afterwards Aug 02 02:15:10 lemme check Aug 02 02:15:48 hmm shhd seems to get killed right after connect Aug 02 02:15:54 resrtart Aug 02 02:16:08 Do you have a serial console wired upA? Aug 02 02:16:13 s/upA/up/ Aug 02 02:16:14 mwester meant: Do you have a serial console wired up? Aug 02 02:16:21 nopes Aug 02 02:16:52 I wonder if modloading the zd1211 driver is killing the network stack and thus disconnecting your ssh connection... Aug 02 02:16:53 after reboot i should connect again Aug 02 02:17:03 Unslung or openslug? Aug 02 02:17:14 debslug build from openslug Aug 02 02:17:27 via crosscompile Aug 02 02:17:33 So you are using openslug kernel modules, then? Aug 02 02:17:52 yeah from openembedded Aug 02 02:18:03 i changewd the makefile for the newer card Aug 02 02:18:20 enabled b Aug 02 02:18:22 Ok. How did you change the Makefile? Anything new required? Aug 02 02:18:36 You're sure it's a b? Aug 02 02:18:55 yeah modprobe zd1121b Aug 02 02:18:59 not zd1121 Aug 02 02:19:29 hmm Aug 02 02:19:34 Ok. The last version of the zd1211 driver I messed with was R74, AFAIK. What's it at now? Aug 02 02:19:42 i used 77 Aug 02 02:20:00 maybe i should try an earlier?# Aug 02 02:20:37 loggin in agian Aug 02 02:20:48 Ok. Sure is a pain without the serial console. I've not seen loading the driver disturb the system... that usually happens when you ifconfig it, or put it under load. Aug 02 02:21:01 slug:~# uname -a Aug 02 02:21:01 Linux slug 2.6.16 #1 PREEMPT Wed Aug 2 00:49:46 CEST 2006 armv5tel GNU/Linux Aug 02 02:21:01 slug:~# Aug 02 02:22:58 slug:~# insmod /lib/modules/2.6.16/kernel/drivers/net/zd1211b.ko Aug 02 02:22:59 slug:~# ls Aug 02 02:22:59 zd1211_r77-r1_ixp4xxle.ipk Aug 02 02:22:59 slug:~# ls Aug 02 02:22:59 zd1211_r77-r1_ixp4xxle.ipk Aug 02 02:22:59 slug:~# ls Aug 02 02:23:01 zd1211_r77-r1_ixp4xxle.ipk Aug 02 02:23:03 slug:~# ls Aug 02 02:23:05 -bash: /bin/ls: No such file or directory Aug 02 02:23:07 slug:~# Aug 02 02:23:09 hehe Aug 02 02:23:11 right like 10 seconds after insmod Aug 02 02:23:17 no file is found Aug 02 02:24:02 My bet is on a kernel "oops" causing that. Looks like the driver is crashing the system in some way. Aug 02 02:24:11 yepp Aug 02 02:24:21 will try earlier versions Aug 02 02:24:23 why 'insmod' and not modprobe? Aug 02 02:24:24 Are you running the kernel you built from that cross-compile environment? Aug 02 02:24:31 yepp Aug 02 02:24:43 used that image to flash and debootstrap Aug 02 02:25:03 Ok, well then the cross env is working -- must be something with the driver. You might try going back to an older version of the driver. Aug 02 02:25:18 yep will do Aug 02 02:28:02 the thing was, i couldnt change the build patch files from opendebian, i interrupted the normal config process after patching, deleted the state file for config and compile changed the make file in the temp dir to do the B version, and started bitbake right from after patching Aug 02 02:33:43 i mean stamp files Aug 02 02:36:14 03bzhou * r3703 10optware/trunk/make/gnupg.mk: gnupg: upstream upgrade to 1.4.5 Aug 02 02:46:21 hmm i get execformat error when i install the module with dpkg **** ENDING LOGGING AT Wed Aug 02 02:59:57 2006