**** BEGIN LOGGING AT Fri Sep 29 02:59:57 2006 Sep 29 03:22:24 03bzhou * r4122 10optware/trunk/make/ (py-tgfastdata.mk py-turbocheetah.mk py-turbokid.mk): py-turbogears plugins: use svn tag Sep 29 03:47:51 03bzhou * r4123 10optware/trunk/ (Makefile make/py-genshi.mk): added py-genshi Sep 29 04:18:03 anyone know of a decent quality ide to usb hard drive kit? Sep 29 04:21:42 03bzhou * r4124 10optware/trunk/make/cups.mk: cups: fixed a typo Sep 29 08:09:04 03oleo * r4125 10optware/trunk/ (4 files in 2 dirs): transmission: added daemon to latest revision Sep 29 12:15:08 03rwhitby * r73 10slugimage/trunk/slugimage: slugimage: First cut at supporting microcode in the payload area. Sep 29 12:15:25 I hope it's tested? ;) Sep 29 12:15:48 nope Sep 29 12:15:59 but it's not tagged either :-) Sep 29 12:17:46 I did do a diff on the hexdump of the newly generated images versus a known good one. Sep 29 16:53:38 Hi Sep 29 16:54:10 AdamBaker: You asked a few days ago if I had access to a nslu2 build environment, and the answer is Yes. Sep 29 17:33:58 Tobbe: In that case you can find my diffs to coreutils.mk and the content that needs to be in sources/coreutils/config.cache at http://pastebin.ca/186198 Sep 29 17:35:50 Following Rod's explanation that they didn't want to change /etc/mtab to be a link as some of the Linksys binaries modify it I think the best thing will be if I tweak coreutils to reference /proc/mounts instead of /etc/mtab Sep 29 17:39:01 gda_: morning Sep 29 17:39:46 I've rebuilt the bootstrap script recently. I'll rebuild it again when I've seen what is wrong with the ds101 one. Sep 29 17:40:07 (I'm up to -r11, but it's not released anywhere) Sep 29 17:43:12 AdamBaker: Thanks a lot. I'll try it out in a few minutes Sep 29 17:45:40 NAiL: great, I had already I have the pest, because all are ingnoring me Sep 29 17:46:25 s/already/already thought/g Sep 29 17:46:25 gda_ meant: NAiL: great, I had already thought I have the pest, because all are ingnoring me Sep 29 17:47:02 I'm rarely in front of my pc nowadays Sep 29 17:48:32 NAiL: not only you, I have written about the openldap and samba problem, but nobody seems to care Sep 29 17:50:44 working on it Sep 29 17:52:17 samba should just link to the latest openldap, shouldn't it? Sep 29 17:52:49 NAiL: no, read my mail, it is currently linked to the newest jdap Sep 29 17:53:28 but there gets no ldap installed, because an older version is already part of the firmware Sep 29 17:54:03 2.2 is in the firmware and samba is linked against 2.3 Sep 29 17:54:55 uh, no Sep 29 17:55:09 ANNOUNCEMENT: limax is going down for maintenance - this will take out trac, monotone, svn Sep 29 17:55:19 expected downtime it < two hours Sep 29 17:56:03 gda_: /lib is 2.3.so.0.1.6, /opt/lib is 2.3.so.0.2.15 Sep 29 17:56:34 atleast on my firmware, .371 Sep 29 17:57:05 samba is complaining that it can't find 2.2.x Sep 29 17:58:45 NAiL: sorry, than I completly missunderstood him Sep 29 17:59:12 unfortunately, it seems that the autobuild of the ds101 no longer works Sep 29 17:59:30 I cleaned out the dir to restart it from scratch, but it fails to even complete crosstool Sep 29 18:00:19 NAiL: how can samba ask for this version after eno had rebuild it, because of autobuild? Sep 29 18:01:42 I don't think the bump rebuild samba at all Sep 29 18:02:16 anyways, I'm trying to rebuild now **** ENDING LOGGING AT Fri Sep 29 18:02:47 2006 **** BEGIN LOGGING AT Fri Sep 29 18:04:12 2006 Sep 29 18:06:57 can anyone recommend an ide to usb hard drive kit? Sep 29 18:07:33 check the wiki Sep 29 18:07:39 (if it's up again) Sep 29 18:08:43 it should be back up Sep 29 18:08:47 ahh Sep 29 18:09:32 gda_: so, I guess the openldap libs isn't really required on the ds101 with the latest firmware Sep 29 18:11:28 (as long as samba is linked with the somewhat-up-to-date openldap libs) Sep 29 18:12:13 something like http://www.usb-ware.com/ads-usb-2-hard-drive-kit.htm Sep 29 18:12:21 NAiL: it looks like we don't need it Sep 29 18:13:08 ANNOUNCEMENT: limax is back up Sep 29 18:13:08 NAiL: I had updated openldap to 2.3 some days ago, so for staging it is available Sep 29 18:13:51 gda_: ok, samba is building now, so it should pick up the new libs Sep 29 18:16:50 03nail * r4126 10optware/trunk/make/samba.mk: samba: bump PR Sep 29 18:24:17 hi there Sep 29 18:24:31 i have noticed a strange bahavior on my slug Sep 29 18:25:18 i have 4 hard drives connected to it. One is like changing its device name all the time. Starts with sdd, then after a time sde,sdf,sdg...etc.... Sep 29 18:25:33 this is problematic for sharing,etc... Sep 29 18:25:42 any ideas ? Sep 29 18:25:59 03nail * r4127 10optware/trunk/Makefile: Remove transmission from ds101 feed Sep 29 18:26:07 does dmesg say anything? Sep 29 18:26:59 03nail * r4128 10optware/trunk/Makefile: Makefile: OOps, replace transmission with transcode for DS101 feed Sep 29 18:28:33 03nail * r4129 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: Change version Sep 29 18:28:58 15:0:0:0: rejecting I/O to dead device Sep 29 18:28:58 15:0:0:0: rejecting I/O to dead device Sep 29 18:28:58 15:0:0:0: rejecting I/O to dead device Sep 29 18:28:58 15:0:0:0: rejecting I/O to dead device Sep 29 18:29:03 many many times Sep 29 18:29:49 AdamBaker: I can't patch the .mk file. I get this message "3 out of 5 hunks FAILED -- saving rejects to file coreutils.mk.rej" Sep 29 18:29:59 the drive is SATA.... Sep 29 18:30:15 where should I place the .patch file, and what command should I use when applying it? Sep 29 18:34:09 RastafaI: Bad cable possibly? There's a hardware problem somewhere apparently. Sep 29 18:34:42 hmm ok, i will try some changes Sep 29 18:34:42 Tobbe: you've tried to apply the patch correctly since 2 hunks worked ;) Sep 29 18:35:27 NAiL: Ok, good :) Sep 29 18:35:50 so the problem must be that we're not starting off with the same original file then... Sep 29 18:37:00 Tobbe: exactly Sep 29 18:51:17 gda_: Didn't help rebuilding: Sep 29 18:51:17 Starting smbd: Sep 29 18:51:17 /opt/sbin/smbd: error while loading shared libraries: liblber-2.2.so.7: cannot open shared object file: No such file or directory Sep 29 18:51:22 * NAiL goes off to work Sep 29 18:51:24 back later Sep 29 19:00:04 Tobbe: make/coreutil.mk hasn't changed since svn revision 3135 in April, might your optware sources be older than that? Sep 29 19:00:34 no, I didn't even have my slug then :) Sep 29 19:00:52 I'm regrabbing it from svn as we speak Sep 29 19:04:59 Does samba include its own ldap? Sep 29 19:11:43 AdamBaker: I'm still getting that error Sep 29 19:12:52 NAiL: you got it right. bad cable. thank you Sep 29 19:15:26 Tobbe: I don't know why patch is failing but I've dumped the whole coreutils.mk file into http://pastebin.ca/186301 Sep 29 19:19:01 Thanks, I'm making it now Sep 29 20:29:51 isn't http://trac.nslu2-linux.org/slugos/ticket/25 obsolete now, since udev is in charge again ? Sep 29 20:45:12 AdamBaker: I had no problems with the build and the package is now installed :) Thanks a lot for your help! Sep 29 20:46:11 However, the new df doesn't show as many lines as the old one did. Is that because of the /etc/mtab stuff you've been talking about? Sep 29 20:46:27 Here's the output from both the old and the new df: http://rafb.net/paste/results/39OQ2c61.html Sep 29 20:49:45 That's exactly what I've been talking about. I've temporarily delete /etc/mtab on one of my slugs and created a symlink to /proc/mounts to replace it. df then behaves itself but I think the link will get destroyed at reboot. Sep 29 20:50:33 Thought so Sep 29 21:33:02 'night Sep 30 01:02:48 RastafaI: Np ;-) **** ENDING LOGGING AT Sat Sep 30 02:59:57 2006