**** BEGIN LOGGING AT Sun Oct 15 02:59:57 2006 Oct 15 15:19:05 playing with .19-rc2 on the nas100d Oct 15 15:19:12 libata PATA ok Oct 15 15:19:19 with a minor bug: Oct 15 15:19:21 ata2: port is slow to respond, please be patient (Status 0xff) Oct 15 15:19:21 ata2: port failed to respond (30 secs, Status 0xff) Oct 15 15:19:21 ata2: SRST failed (status 0xFF) Oct 15 15:19:21 ata2: SRST failed (err_mask=0x100) Oct 15 15:19:21 ata2: softreset failed, retrying in 5 secs Oct 15 15:19:21 ata2: SRST failed (status 0xFF) Oct 15 15:19:23 ata2: SRST failed (err_mask=0x100) Oct 15 15:19:25 ata2: softreset failed, retrying in 5 secs Oct 15 15:19:27 ata2: SRST failed (status 0xFF) Oct 15 15:19:29 ata2: SRST failed (err_mask=0x100) Oct 15 15:19:31 ata2: reset failed, giving up Oct 15 15:19:43 will have to see how to configure the driver to avoid searching for the second port on the nas100d Oct 15 15:48:22 can't manage to throw in the microcode Oct 15 15:48:24 debian:~# cat /usr/lib/hotplug/firmware/NPE-B >/dev/ixp4xx_ucode Oct 15 15:48:24 Bad magic:464c457f Oct 15 15:48:24 cat: write error: Bad address Oct 15 15:48:29 any suggestion? Oct 15 15:57:15 ok, got the microcode from redboot Oct 15 15:58:18 ixp4xx eth working sooooooo nice! :) Oct 15 16:08:35 <[g2]> dwery congrats! Oct 15 16:08:43 did nothing :) Oct 15 16:08:59 <[g2]> you're running the non-intel stuff right ? Oct 15 16:09:04 (well.. a few patches) Oct 15 16:09:04 yes Oct 15 16:09:08 <[g2]> excellent Oct 15 16:09:27 <[g2]> three cheers for blaster8 and christian Oct 15 16:10:52 <[g2]> dwery how did you pull the code from redboot ? Oct 15 16:11:01 mc_grab Oct 15 16:11:12 <[g2]> mc_grab ? Oct 15 16:11:17 let me fine the complete invocation Oct 15 16:12:02 ./mc_grab 1010200 2010200 < /dev/mtd3 >NPE Oct 15 16:12:03 Device: IXP425:NPE_B Func: 1 Rev: 02.00 Size: 12836 bytes ID:01010200 Oct 15 16:12:03 Device: IXP425:NPE_C Func: 1 Rev: 02.00 Size: 12836 bytes ID:02010200 Oct 15 16:12:11 that was on a nas100d with ludeboot Oct 15 16:12:36 <[g2]> got a statically linked mc_grab ? Oct 15 16:13:29 I compiled it on the lude itself Oct 15 16:13:31 <[g2]> /dev/mtd3 ? I don't think that's redboot Oct 15 16:13:42 should be ludeboot Oct 15 16:14:00 it didn't worked on redboot because lude's redboot has no npe support (iirc) Oct 15 16:14:15 * [g2] is wondering about the Loft silly Oct 15 16:15:21 should just work Oct 15 16:15:37 <[g2]> where's the code for mc_grab ? Oct 15 16:16:07 * [g2] sees something in SVN Oct 15 16:16:45 it comes along with the driver Oct 15 16:16:47 morning everyone Oct 15 16:16:55 I'm online from my new flat :) Oct 15 16:16:57 'morning NAiL Oct 15 16:24:07 03azummo * r479 10kernel/trunk/patches/2.6.19/ (32-ixp4xx-net-driver-fix-qmgr.patch series): Small fixes to the ixp4xx net driver Oct 15 16:30:56 gah Oct 15 16:31:09 I haven't got the wap key from the landlord yet Oct 15 16:31:17 Need to be online cabled :-\ Oct 15 16:37:37 03azummo * r480 10kernel/trunk/patches/2.6.19/ (2 files): refreshed Oct 15 16:38:23 <[g2]> dwery do you have to load a module before the cat ? Oct 15 16:38:37 yes. I've compiled it statically anyhow. Oct 15 16:38:45 <[g2]> which one ? Oct 15 16:38:52 you need to load the three ixp4xx_* modules Oct 15 16:39:43 <[g2]> _qmgr, _npe, and _mac ? Oct 15 16:39:54 ixp4xx_mac.ko Oct 15 16:39:54 ixp4xx_npe.ko Oct 15 16:39:54 ixp4xx_qmgr.ko Oct 15 16:40:10 then udev will make the /dev entry for you Oct 15 16:40:22 <[g2]> I've already created the entry Oct 15 16:40:31 <[g2]> s/entry/nod/ Oct 15 16:40:31 [g2] meant: I've already created the nod Oct 15 16:41:03 ok Oct 15 16:42:22 <[g2]> swapped image found Oct 15 16:42:22 <[g2]> Image loaded to NPE-B Func:1, Rel: 2:0, Status: 92c00000 Oct 15 16:42:28 <[g2]> how's that look ? Oct 15 16:42:36 good Oct 15 16:43:04 <[g2]> how do I bring up the device ? Oct 15 16:43:12 ifconfig ethx .... Oct 15 16:43:50 <[g2]> SWEET! Oct 15 16:44:15 * [g2] joins the club Oct 15 16:44:15 you will probably have to configure the platform device to tell the driver you have two ports on the loft Oct 15 16:44:31 * [g2] tries to bring up eth1 Oct 15 16:44:46 the driver coding style needs to be changed in order to have it accepted upstream Oct 15 16:45:41 <[g2]> DOH! Oct 15 16:45:59 <[g2]> it looked like eth1 was up too, but I pulled the ethernet to switch ports Oct 15 16:46:14 * [g2] was running _poe_ :( Oct 15 16:46:22 :-D Oct 15 16:46:23 hahaha Oct 15 16:46:44 <[g2]> all of a sudden the blinky light went dark Oct 15 16:46:51 <[g2]> doh! Oct 15 16:48:01 swapped image found Oct 15 16:48:02 Image loaded to NPE-B Func:1, Rel: 2:0, Status: 82400000 Oct 15 16:48:02 swapped image found Oct 15 16:48:02 Image loaded to NPE-C Func:1, Rel: 2:0, Status: 80c00000 Oct 15 16:48:19 <[g2]> dwery fires up his loft ? Oct 15 16:48:33 not yet Oct 15 16:48:35 it's the lude Oct 15 16:48:47 I'll have to make space for all the devices again Oct 15 16:49:31 now don't ask me why that image i've got has two NPEs.. Oct 15 16:49:38 sinc ehte lude has only one port Oct 15 16:53:42 <[g2]> dwery both port seem to work Oct 15 16:54:01 great Oct 15 16:54:02 <[g2]> I've taken eth0 down to test eth1 (but not the power ) :) Oct 15 16:54:22 <[g2]> the driver in 2.6.18 needs work Oct 15 16:54:46 <[g2]> 64 bytes from 192.168.1.10: icmp_seq=15 ttl=64 time=0.000 ms Oct 15 16:54:46 <[g2]> ping: sendmsg: No buffer space available Oct 15 16:54:56 anyoen around.. i know this is a developers channel but noone is responoding in nslu2-general...its about overclocking Oct 15 16:56:52 <[g2]> enterusernane just ask you question Oct 15 16:56:56 <[g2]> s/you/your/ Oct 15 16:56:58 [g2] meant: enterusernane just ask your question Oct 15 17:05:36 <[g2]> dwery with statically linked modules how early can the network be used ? (I'm guessing loading the NPE firmware is the gating factor) Oct 15 17:06:08 [g2]: exactly. as long as you have a fs you can load the firmware Oct 15 17:06:43 <[g2]> dwery I'm specifically thinking about NFS root Oct 15 17:07:49 then you have to create something that loads the npe firmware directly from the flash Oct 15 17:07:49 <[g2]> I'd imagine we could post pend a tiny ramdisk on the kernel Oct 15 17:07:49 or maybe from an initramfs Oct 15 17:08:16 <[g2]> my microcode seems tiny like 25K Oct 15 17:08:16 mine too Oct 15 17:08:51 <[g2]> I've already got a <1M jffs2 root Oct 15 17:09:03 <[g2]> that could load the driver Oct 15 17:11:37 I guess ehci has problems... Oct 15 17:11:39 debian:~# usb 1-3: new high speed USB device using ehci_hcd and address 4 Oct 15 17:11:39 ehci_hcd 0000:00:03.2: fatal error Oct 15 17:11:39 Unable to handle kernel NULL pointer dereference at virtual address 00000068 Oct 15 17:11:39 pgd = c0004000 Oct 15 17:11:39 [00000068] *pgd=00000000 Oct 15 17:11:39 Internal error: Oops: 817 [#1] Oct 15 17:15:17 [g2]: can you check if you have problems with usb/usb-storage ? Oct 15 17:19:08 <[g2]> dwery which kernel are you running Oct 15 17:19:28 <[g2]> On 2.6.18 the pci devices don't get fully enabled Oct 15 17:19:46 .19-rc2 Oct 15 17:20:14 <[g2]> well it's an rc right ? Oct 15 17:22:58 yes Oct 15 17:24:02 <[g2]> hey what that thingy that show load (not uptime) Oct 15 17:24:08 <[g2]> s/show/shows/ Oct 15 17:24:08 [g2] meant: hey what that thingy that shows load (not uptime) Oct 15 17:24:43 heither cpu or heartbeat trigger Oct 15 17:24:47 :-D Oct 15 17:25:07 s/heit/eit/ Oct 15 17:25:22 <[g2]> cpuload ? Oct 15 17:25:45 <[g2]> iirc in in coreutils Oct 15 17:26:04 <[g2]> "TOP"! Oct 15 17:26:36 <[g2]> top now looks sane Oct 15 17:26:36 top does a little bit more :) Oct 15 17:27:00 <[g2]> yeah be now the load averages in top are 0 Oct 15 17:27:01 i think I will use rc.local to stop that damn blue led flash on bootup Oct 15 17:28:23 doh! this one is still there: Oct 15 17:28:25 BUG: warning at arch/arm/mm/consistent.c:363/dma_free_coherent() Oct 15 17:30:21 I removed ehci, usb seems to work Oct 15 17:35:05 <[g2]> cool it seems to have stood up to a flood ping Oct 15 17:35:25 <[g2]> 272049 packets transmitted, 272048 received, 0% packet loss, time 48751ms Oct 15 17:35:25 <[g2]> rtt min/avg/max/mdev = 0.108/0.117/1.864/0.021 ms, pipe 2, ipg/ewma 0.179/0.114 ms Oct 15 17:35:54 :) Oct 15 17:36:04 given the amount of ehci patches in -mm I'd wait .19 final. Oct 15 17:36:52 <[g2]> mmhh that' 5.5K packets a second and only about 25% system load on the 533 Oct 15 17:37:15 <[g2]> bbl Oct 15 17:43:45 any particular reason for having CONFIG_KALLSYMS_EXTRA_PASS=y in defconfig? Oct 15 17:44:22 and CONFIG_UID16 Oct 15 17:45:56 Dunno about UID16 Oct 15 17:46:08 actually, I can't remember what the extra pass actually did Oct 15 17:46:44 it's useful only if you get a bug in kallsyms Oct 15 17:50:27 skip it ;) Oct 15 17:51:28 uh http://trac.nslu2-linux.org/kernel/ticket/22 Oct 15 17:51:31 doh! :) Oct 15 17:52:00 haha Oct 15 17:52:20 i'd say this one can be closed, right? http://trac.nslu2-linux.org/kernel/ticket/21 Oct 15 17:53:05 no idea actually Oct 15 17:53:44 well, it works on my lude ;) Oct 15 17:55:12 well, then close it ;) Oct 15 17:55:58 I'll wait for rwhitby ;) Oct 15 17:56:17 is your lude ok? Oct 15 17:58:59 I don't have one Oct 15 17:59:10 I've only got slugs, fsg-3 and n2100 Oct 15 17:59:39 uh ok Oct 15 18:00:06 not dsmg600 nor nas100d :-\ Oct 15 18:12:47 03azummo * r481 10kernel/trunk/patches/2.6.19/ (45-eeprom-new-notifier.patch series): Ported notifier patch to .19-rc2. Oct 15 18:13:29 bbl Oct 15 18:18:13 anyhow.. regarding eeprom notifier, maybe it would be easier to stick in userspace.. Oct 15 18:25:32 what exactly does the eeprom notifier do? Oct 15 18:43:46 tell's come piece of code that the eeprom is present so that it can read out the mac address and feed it to the network layer Oct 15 18:44:08 03bzhou * r4229 10optware/trunk/ (Makefile make/perl-xml-parser.mk): added and promoted perl-xml-parser Oct 15 18:47:50 let's just set the mac from userspace Oct 15 18:48:09 * dwery agrees Oct 15 18:48:15 let's ask our project manager :) Oct 15 18:57:33 Hello. Oct 15 18:57:38 Anyone awake? Oct 15 19:06:08 maybe Oct 15 19:06:41 yes, I'd like to file a bug.. Oct 15 19:06:52 This is only for developers.. Oct 15 19:07:23 But just that anyone else is kept from a huge amount of compiling without any good.. Oct 15 19:07:23 glibc-2.5 WON'T work on nslu2.. Oct 15 19:07:38 it breaks something on network side.. Oct 15 19:07:38 some stuff will work.. Oct 15 19:08:15 but for e.g. wget and dropbear/openssh won't. Oct 15 19:08:15 busybox's wget did work.. Oct 15 19:08:15 downgrading to glibc-2.4-r4 now.. Oct 15 19:11:30 03azummo * r482 10kernel/trunk/patches/2.6.19/ (60-nas100d-artop-temp-fix.patch series): Oct 15 19:11:30 Temporary fix for libata issues while trying Oct 15 19:11:30 to detect the second IDE port on the NAS100D. Oct 15 19:12:19 jake_: ok, i'll have to tell to the release manager Oct 15 19:12:20 thanks Oct 15 19:18:59 NAiL: ping Oct 15 19:57:58 dwery: pong Oct 15 19:58:18 NAiL: please read jake_'s statements above Oct 15 20:04:02 Okey dokey... dsm-g600 RevA is working again with OpenSlug 4.0 (in BE mode). The velocity driver patch, which was a hack to begin with, is now even worse. "appallingly awful" describes it... Oct 15 20:09:54 jake_: Got any links? Oct 15 20:10:12 or own experience? Oct 15 20:10:45 if it's dropbear/openssh/wget, I'm suspecting ssl rather than network Oct 15 20:32:04 <[g2]> dwery awake ? Oct 15 20:32:11 yep Oct 15 20:32:36 <[g2]> dwery "I'll have to tell the release mgr.... NAiL ping" --- lmao Oct 15 20:32:49 :) Oct 15 20:33:21 I had to search on WhoIsWho to actually remember who was the releas emanager Oct 15 20:36:55 <[g2]> three cheers for NAiL ! Oct 15 20:37:03 <[g2]> many thanks for all the great work Oct 15 20:37:08 <[g2]> and others too Oct 15 20:49:14 heh Oct 15 20:49:33 I guess it's closing in Oct 15 20:49:50 I'll look at stuff when I get a bit more settled Oct 15 20:50:03 but now, nite :) Oct 15 20:51:06 nite NAiL Oct 15 20:59:49 NAiL: Oct 15 20:59:53 what links? Oct 15 21:10:29 yeah. well the problem came AFTER installing glibc-2.5 Oct 15 21:10:50 I'll need to redo a lot of stuff for gentooslug now.. Oct 15 21:11:23 But I'll stick with glibc-2.4-r4 and mask newer for now just so it would be safe.. Oct 15 21:12:30 jake_: hey, did you guys get it working? Oct 15 21:12:48 I missed that conversation probably.. Oct 15 21:13:39 03marceln * r4230 10optware/trunk/make/sudo.mk: sudo: Upstream update Oct 15 22:32:57 VoodooZ: ? Oct 15 22:33:01 huh.. Oct 15 22:33:07 hey Oct 15 22:33:15 I just formatted my harddrive for nslu2.. Oct 15 22:33:24 since downgrading glibc is impossible. Oct 15 22:34:00 hey.. voodoo2.. Oct 15 22:34:08 did you had that issue with drivers? Oct 15 22:34:13 webcam drivers? Oct 15 22:34:36 * jake_ has just sent a nudge for VoodooZ Oct 15 22:34:38 :) Oct 15 22:35:26 which glibc are you using on your slug? Oct 15 22:35:45 now I don't have any, but I'm moving back to 2.4-r4.. Oct 15 22:35:51 I tried to use 2.5 Oct 15 22:35:56 really. Oct 15 22:36:04 did it work? Oct 15 22:36:09 too unstable? Oct 15 22:36:22 nope. It broke something propably as NAiL said.. Oct 15 22:36:26 with ssl.. Oct 15 22:36:31 ouch. Oct 15 22:36:40 since it broke my network connectivity completely. Oct 15 22:36:41 so you couldn't ssh in the box? Oct 15 22:36:45 Actually.. not completely.. Oct 15 22:36:47 Yeah.. Oct 15 22:36:51 I booted via openslug.. Oct 15 22:36:55 and then chrooted to it.. Oct 15 22:37:00 so glibc 2.4 is working fine? Oct 15 22:37:11 That's why I really want to stick with symbios of openslug and gentoo.. Oct 15 22:37:18 instead of running standalone gentoo. Oct 15 22:37:27 Yes. 2.4-r4 works just great. Oct 15 22:37:35 Just need to recompile it now.. Oct 15 22:37:37 very nice! Oct 15 22:37:40 Should be ready tomorrow.. Oct 15 22:37:46 But hey.. Oct 15 22:37:50 Is this for head only though? Oct 15 22:37:50 You missed my question.. Oct 15 22:37:57 which one? Oct 15 22:38:08 head only though? I don't understand the question.. Oct 15 22:38:19 You had problem with missing webcam drivers didn't you? Oct 15 22:38:28 Is it possible for somebody using slugos3.10 to upgrade the glibc package? Oct 15 22:38:31 ^My question. Oct 15 22:38:42 I am using slugos 3.10 Oct 15 22:38:46 cool Oct 15 22:38:51 I use it to boot gentooslug. Oct 15 22:39:09 ok. so how should I expect to upgrade my bot to use it? Oct 15 22:39:09 check http://www.roadrunner.cx/gentooslug for more information if you want.. Oct 15 22:39:30 Heh, gentooslug uses slugos to boot.. Oct 15 22:39:48 but kinda after all is completely it's own system-- Oct 15 22:39:53 My robot still uses 3.10 so until slugos4 is out I'd rather not have to upgrade it but glibc2.4 would be nice to have now. Oct 15 22:39:56 but you STILL miss my question here :) Oct 15 22:40:05 the driver question? Oct 15 22:40:10 yes. Oct 15 22:40:20 I'm not sure what you're asking for? Oct 15 22:40:40 Were you searching for ov511 or something like that drivers earlier? Oct 15 22:40:45 Do you still look for them? Oct 15 22:40:46 yep. Oct 15 22:40:49 I compiled them for you. Oct 15 22:40:56 thanks. Oct 15 22:41:05 I also compiled it myself though Oct 15 22:41:10 I have no idea if it works since I can't test it. Module can be loaded.. Oct 15 22:41:12 Okay.. Oct 15 22:41:18 It works? Oct 15 22:41:20 but if you can commit yours that would be much better than mine. Oct 15 22:41:31 what's wrong with your drivers? Oct 15 22:41:47 yeah but I just realised it doesn't support YUP420P properly... Oct 15 22:41:58 So I kind of did all that for nothing. Oct 15 22:41:58 Okay. Oct 15 22:42:04 I'm not sure if mine does it. Oct 15 22:42:06 Wait a sec.. Oct 15 22:42:07 But it would still benefit others. Oct 15 22:42:11 I'll put them on my web share.. Oct 15 22:42:14 nah. Oct 15 22:42:25 If it's 2.32 (latest) it's the same. Oct 15 22:42:37 the OVFX2 part only does RGB for now. Oct 15 22:42:44 these kinda aren't on install directory, it's source directory and they are precompiled natively with slug with slugos-3.10's kernel source and config. Oct 15 22:42:46 I guess I could fix themmyself... Oct 15 22:43:06 I see. Mine are a .bb package. Oct 15 22:43:12 ov511-2.32 Oct 15 22:43:19 yep. Oct 15 22:43:23 do you want it? Oct 15 22:43:32 perhaps I'll post my .bb file for people to commit. Oct 15 22:43:45 Okay, I'll tar it up.. Oct 15 22:43:57 email it to gauthier . stephane (at) gmail.com unless it's too big. Oct 15 22:44:32 It's not that big.. Oct 15 22:44:40 But how about I put it on my web server? Oct 15 22:44:46 you can get it from there.. Oct 15 22:44:55 I don't kinda have a nice browser on this machine :D Oct 15 22:45:09 It's packed now.. Oct 15 22:45:17 So I'll just copy it to mu www.. Oct 15 22:45:34 Okay.. Oct 15 22:45:36 It's there.. Oct 15 22:45:46 http://www.roadrunner.cx/gentooslug/ov511.tar.bz2 Oct 15 22:45:56 untar to /usr/src Oct 15 22:46:10 depmod compiled .ko files and insmod.. Oct 15 22:46:28 can't help you with anything else since I haven't been able to test this stuff since I don't have such device.. Oct 15 22:47:00 I just felt my self generous that day so I thought that I'll try to help you out a bit. Don't know if it's any good :) Oct 15 22:47:06 But worth a try.. Oct 15 22:47:08 sounds good. Oct 15 22:47:47 Oh, and ofcourse, compiler should be pretty much identical to one used to compile slugos-3.10's kernel.. Oct 15 22:49:03 jake_: Sounds great. Thanks for time. Oct 15 22:49:23 So the glibc 2.4 thing is coming tommorow you said. Oct 15 22:49:29 Heh :D Oct 15 22:49:34 It comes to my gentooslug.. :D Oct 15 22:49:41 Is it going to be available as a package or ? Oct 15 22:49:58 Are you committing your changes to the repo? Oct 15 22:50:00 Eh, gentooslug is a nearly 300 megabytes as tar.bz2 Oct 15 22:50:16 and slugos is used as.. well like a bootloader for it.. Oct 15 22:50:29 I'm just talking about the glibc2.4 part for slugos 3.10 Oct 15 22:50:42 you have misunderstood.. Oct 15 22:50:53 I thought so.. :( Oct 15 22:50:55 glibc2.4-r4 isn't coming for slugos 3.10, it's coming for gentooslug.. Oct 15 22:51:07 oh. Oct 15 22:51:08 slugos-3.10 is used to LOAD gentoo on slug :) Oct 15 22:51:18 ok. totally different then. Oct 15 22:51:20 So it's compatible yes.. Oct 15 22:51:35 But gentooslug currently takes over 200mb as a tar.bz2 Oct 15 22:51:39 yeah but the problem is getting it to run under slugos Oct 15 22:51:46 so that stuff never could fit to flash :) Oct 15 22:51:53 It's almost 2GB as unpacked.. Oct 15 22:51:55 sorry run=>build Oct 15 22:52:17 but I'm cleaning it soon.. getting rid of old gcc-3.4.6 and other old stuff.. Oct 15 22:52:21 nothing. Oct 15 22:52:43 Hoepfully my ov511 drivers helped even a bit.. Oct 15 22:54:45 yep. I'll try them soon. I got sidetracked by other stuff... Thanks for you help **** ENDING LOGGING AT Mon Oct 16 02:59:57 2006