**** BEGIN LOGGING AT Sun Nov 05 02:59:57 2006 Nov 05 06:25:19 03bzhou * r4376 10optware/trunk/ (6 files in 3 dirs): ftpcopy: resolved x-compilation issues, moved from native to cross Nov 05 10:15:18 CC mm/page_alloc.o Nov 05 10:15:18 /tmp/ccSaj3th.s: Assembler messages: Nov 05 10:15:18 /tmp/ccSaj3th.s:3079: Error: .err encountered Nov 05 10:15:18 make[2]: *** [mm/page_alloc.o] Error 1 Nov 05 10:15:18 make[1]: *** [mm] Error 2 Nov 05 10:15:19 make[1]: Leaving directory `/home/slug/kernel/linux-2.6.19-rc4' Nov 05 10:15:21 make: *** [vmlinuz-2.6.19-rc4] Error 2 Nov 05 10:16:38 morning Nov 05 10:16:49 morning Nov 05 10:17:07 hi rwhitby Nov 05 10:20:24 i have a problem regarding apex... i'm using DebianInstaller RC1 FW, which uses APEX as a 2nd stage boot loader... the problem is that even when flashing this 2nd stage boot loader with a version of APEX compilled for more that 32MB of RAM than it wont write the SDR_CONFIG register... is there any way to eg. hardcode the register change or get it by changing some command lines while setting up APEX before I buld it ?? Nov 05 10:27:19 dunno - ask Marc Singer Nov 05 10:31:26 do you have his @ maybe ? Nov 05 10:37:04 should be on the apex home page Nov 05 10:38:31 can't find it there :/ also it appears that it's not in the APEX source Nov 05 10:41:17 Szafran: google is your friend Nov 05 10:45:03 03rwhitby * r551 10kernel/trunk/patches/2.6.19/ (42-nas100d-mtd-load-mac.patch defconfig series): Enabled patches that read mac and firmware from flash. Added mac reading patch for nas100d. Enabled a couple more modules in defconfig which had been accidentally missed. Nov 05 10:48:42 03rwhitby * r552 10kernel/trunk/patches/2.6.19/defconfig: 2.6.19 defconfig: fixed missing raid5 config item Nov 05 10:50:52 03rwhitby * r553 10kernel/trunk/Makefile-BE: Makefile-BE: merged back into Makefile Nov 05 10:57:36 ok, kernel build error was a furfy. Shouldn't accidentally use a snapgear arm compiler to compile the kernel. Nov 05 10:58:08 good old OE cross compiler always does the trick. Nov 05 11:10:44 03rwhitby * r554 10kernel/trunk/Makefile: Makefile: removed support for ds101 Nov 05 12:18:19 03rwhitby * r555 10kernel/trunk/ (4 files in 2 dirs): Makefile: added initial support for building apex. defconfig and patches need work. completely untested. Nov 05 13:44:32 03rwhitby * r556 10kernel/trunk/ (4 files in 2 dirs): Makefile: more apex support (multiple targets) and some very initial untested nas100d patches. Nov 05 15:41:59 03azummo * r557 10kernel/trunk/patches/2.6.19/ (13 files): Nov 05 15:41:59 Reordered patches to avoid dependecies conflicts Nov 05 15:41:59 Added ixp4xx net microcode driver and platform device for nslu2 Nov 05 18:24:16 what's the average price of an ebay bought slug in the US? Nov 05 18:29:26 <$80 I guess :-P Nov 05 18:29:47 i paid £55 in the uk Nov 05 18:29:58 afaik you can buy them for $80 from newegg, so a "used" one would probably be cheaper Nov 05 18:30:14 damn my wireless network Nov 05 18:30:24 it takes a break every couple of minutes Nov 05 18:35:46 dwery: what do you think about "replacing" slugos with angstrom? Nov 05 18:36:58 angostrom? what's that? Nov 05 18:37:08 it's a oe distro Nov 05 18:37:37 If it's customizable enough it only makes sense Nov 05 18:37:38 you know, I only use debian Nov 05 18:37:38 :) Nov 05 18:38:29 Instead of having everybody make their own, put effort in one big customizable one. Nov 05 18:39:36 looks like it'll be easier to customize for different devices too Nov 05 18:39:55 (eg. fsg3, dsmg600, nas100d, n2100) Nov 05 18:40:57 would that change affect all the apex/npe stuff the others are working on? Nov 05 18:41:09 shouldn't if it's well abstracted but still. Nov 05 19:00:36 btw.. I recently made some changes to the svn repo Nov 05 19:00:50 I'd appreciate if someone can confirm everything is still compiling Nov 05 19:00:55 thanks :) Nov 05 19:01:09 hehe Nov 05 19:01:32 I'll compile -rc4 and see Nov 05 19:01:46 as a bonus, the mtd partition from which the microcode is loaded is in platform device now Nov 05 19:02:01 and I think I used Ramdisk for the nslu2 Nov 05 19:02:09 that should be changed to the partition that will be used Nov 05 19:07:46 gotta build a toolchain first *cough* Nov 05 19:23:24 you're compiling native? Nov 05 19:24:51 no Nov 05 19:27:22 then apt-get install gcc-4.0-arm Nov 05 19:27:24 :) Nov 05 19:30:56 switched pc instead :P Nov 05 19:31:54 :) Nov 05 19:34:13 ok, compiling Nov 05 19:40:01 a few warnings, but seems to compile fine Nov 05 19:40:16 great Nov 05 19:40:18 thanks Nov 05 19:46:00 it failed :-P Nov 05 19:46:12 But it failed at devio, so it compiled just fine :-P Nov 05 21:55:47 svn commit is slow lately Nov 05 22:07:21 03bzhou * r4377 10optware/trunk/ (Makefile make/tinyscheme.mk): added and promoted tinyscheme Nov 05 22:23:38 Greetings friends - I'm a n00b so go easy on me. I have an unslung 6.8b slug, is it possible to use a usb hub so I can plug in both a printer and usb hard drive? Nov 05 22:27:03 I'm using this firmware: V2.3R63-uNSLUng-6.8-beta Nov 05 22:27:25 ~nslu2-faq Nov 05 22:27:27 it has been said that nslu2-faq is http://www.nslu2-linux.org/wiki/Main/FAQ Nov 05 22:27:37 ~nslu2-howto Nov 05 22:28:05 maybe, that the 1st link could help you.. Nov 05 22:28:22 ~good bot Nov 05 22:28:23 thanks, caplink811_log Nov 05 22:28:36 Ok, thanks for the link but the faq only covers "up to and including v5.5" Nov 05 22:28:39 I'm using v6.8 Nov 05 22:29:06 I guess i'll just try it and see once my drive enclosure arrives Nov 05 22:29:15 but ht emost topics are guilty for unslung-6.8 to Nov 05 22:29:39 ok, seems like it should work then. The slug works like a champ as a cups print server - i finally don't have to have my computer on to share this printer here :) Nov 05 22:29:47 s/ht emost/the most/ Nov 05 22:29:48 caplink811_log meant: but the most topics are guilty for unslung-6.8 to Nov 05 23:14:35 03rwhitby * r558 10kernel/trunk/patches/2.6.19/ (43-nas100d-mtd-microcode.patch defconfig series): Added support for mach-specific microcode partition location for nas100d Nov 05 23:17:45 03gda * r4378 10optware/trunk/make/clamav.mk: clamav: 0.88.6 **** ENDING LOGGING AT Mon Nov 06 02:59:57 2006