**** BEGIN LOGGING AT Tue Jan 15 02:59:57 2008
Jan 15 03:01:53 <JRsup1> I'm working on a project for the NSLU2 that requires building from source a 2.6.23 kernel based slugos.  I haven't built in quite a while.  Can someone point me in the right direction on where to start?  I don't know if I need to start w/ instructions from openembeded's site or nslu2-linux.
Jan 15 03:07:07 <ka6sox> JRsup1, use the master makefile
Jan 15 03:07:25 <ka6sox> the current SVN unstable kernel is a 2.6.23
Jan 15 03:07:37 <ka6sox> (the mastermakefile from nslu2-linux.org)
Jan 15 03:08:00 <ka6sox> (2.6.23.17? (7?))
Jan 15 03:08:46 <JRsup1> ok...good...that's the path I was going to take.  Do you know what the current monotone version they're using is?  Is it still .28?
Jan 15 03:09:10 <ka6sox> I think so..I've not upgraded the Monotone server in a LONG time.
Jan 15 03:09:13 <JRsup1> I had trouble the other day trying to find and install an old version.  I was hoping I wouldn't have to
Jan 15 03:09:31 <ka6sox> you will unless you want to spend a LOT of time converting.
Jan 15 03:09:43 <ka6sox> (hours)
Jan 15 03:10:02 <JRsup1> yeah...I did that once before.  Left the system running for most of a day.
Jan 15 03:10:08 <ka6sox> yep
Jan 15 03:10:40 <JRsup1> I'm running ubuntu 7.10 as my build system.  It couldn't find the dependencies for the older monotone.  any suggestions?
Jan 15 03:13:35 <JRsup1> That, and I'm still bad enough that I don't know if I should get the dapper or sarge .deb for monotone.
Jan 15 03:15:49 <ka6sox> I had to build it from scratch
Jan 15 03:15:55 <ka6sox> wasn't fun to build boot
Jan 15 03:15:57 <ka6sox> er boost
Jan 15 03:16:58 <ka6sox> I guess its enough of a pain that it might be worth building it statically
Jan 15 03:32:07 <JRsup1> ...well...I'll figure it out I guess.  Thanks!
Jan 15 03:32:22 <ka6sox-away> ya
Jan 15 03:32:27 <ka6sox-away> enjoy!
Jan 15 03:46:11 * ka6sox admires the good job done on the gentoo-wiki for the nslu2
Jan 15 03:57:19 <CIA-21> 03bzhou * r7584 10optware/trunk/platforms/ (toolchain-slugosbe.mk toolchain-slugosle.mk): toolchain-slugos*: made TARGET_CROSS_TOOLCHAIN_LOCATION overridable
Jan 15 03:57:50 <ka6sox-away> eno, I've been doing some research on the config file and think I've got a workable one.
Jan 15 03:58:00 <eno> cool
Jan 15 03:58:21 <ka6sox-away> ie one that is workable out of the box but fairly secure.
Jan 15 03:59:14 <ka6sox-away> eno, did you receive my email of yesterday?
Jan 15 04:00:50 <eno> the one about scheduled cheli outage? yes
Jan 15 04:05:26 <ka6sox-away> okay good, then I'll send the file there
Jan 15 04:58:12 <CIA-21> 03bzhou * r7585 10optware/trunk/make/py-routes.mk: py-routes: 1.7 -> 1.7.1
Jan 15 05:05:25 <CIA-21> 03bzhou * r7586 10optware/trunk/make/yougrabber.mk: yougrabber: 0.29.2 -> 0.29.3
Jan 15 05:10:14 <cizzi> im following instructions on http://www.nslu2-linux.org/wiki/Optware/X11 but when I type 'ipkg install vte xdpyinfo xauth' on my debian etch system installed on nslu2 it doesnt find the packages
Jan 15 05:10:21 <cizzi> i also tried with apt-get install
Jan 15 05:11:28 <ka6sox-away> cizzi do you have optware installed on your Debian slug?
Jan 15 05:11:34 <cizzi> i don't believe so
Jan 15 05:13:21 <cizzi> can i install optware as a package?
Jan 15 05:13:24 <cizzi> over debian etch
Jan 15 05:13:27 <cizzi> on my nslu2?
Jan 15 05:16:01 <eno> with debian slug, you rarely need optware packages
Jan 15 05:16:41 <cizzi> im just trying to enable x forwarding to my nslu2
Jan 15 05:17:21 <ka6sox-away> openssh can do that..but dropbear can't
Jan 15 05:17:32 <cizzi> it works for all my debian boxes
Jan 15 05:17:37 <cizzi> same procedure doesnt work on nslu2
Jan 15 05:17:49 <cizzi> (gkrellm:4107): Gtk-WARNING **: cannot open display:
Jan 15 05:17:50 <ka6sox-away> are you using -Y?
Jan 15 05:17:53 <cizzi> putty
Jan 15 05:18:00 <cizzi> and sshd
Jan 15 05:18:15 <eno> where do you want the X client app display to?
Jan 15 05:18:21 <cizzi> to my windows machine
Jan 15 05:18:30 <cizzi> with xming
Jan 15 05:19:03 <cizzi> ka6sox - i didnt put -Y anywhere
Jan 15 05:19:10 <cizzi> is that in putty ?
Jan 15 05:20:08 <CIA-21> 03bzhou * r7587 10optware/trunk/make/py-clips.mk: py-clips: 1.0.4.320 -> 1.0.6.335
Jan 15 05:20:35 <ka6sox-away> that would be a putty option.
Jan 15 05:20:48 <cizzi> its required?
Jan 15 05:20:50 <cizzi> and why
Jan 15 05:20:55 <cizzi> the other machiens dont need it
Jan 15 05:21:32 <ka6sox-away> I am no putty expert..but I do use it.
Jan 15 05:22:01 <cizzi> do i put that in "remote command" field?
Jan 15 05:22:07 <ka6sox-away> so I can't help you there but I do know that for openssh you use ssh -Y or -X to enable forwarding.
Jan 15 05:23:33 <cizzi> not working, seems to be something specific about the nlsu2 unit
Jan 15 05:23:47 <cizzi> thansk anyways
Jan 15 05:23:55 <ka6sox-away> about 2yrs ago JP30 wrote something up about that.
Jan 15 05:24:02 <ka6sox-away> check hte wiki
Jan 15 05:24:50 <eno> putty configuration, Connection, SSH, Tunnels, X11 forwarding, Enable X11 forwarding
Jan 15 05:24:53 <eno> ?
Jan 15 05:25:04 <ka6sox-away> eno has it.
Jan 15 05:25:07 <ka6sox-away> Kewl.
Jan 15 05:25:26 <ka6sox-away> okay back to working on config files
Jan 15 05:25:48 <cizzi> i'll work on it another time
Jan 15 14:08:18 <CIA-21> 03oleo * r7588 10optware/trunk/make/openssh.mk: openssh: provide sftp-server as separate package
Jan 15 14:16:47 <CIA-21> 03oleo * r7589 10optware/trunk/make/openssh.mk: openssh: remove package conflict
Jan 15 19:39:31 <Larry1981> mwester, u there ?
Jan 16 00:17:35 <CIA-21> 03rwhitby * r983 10kernel/trunk/ (Makefile patches/2.6.23/KERNEL): Updated to 2.6.23.14
**** ENDING LOGGING AT Wed Jan 16 02:59:57 2008