**** BEGIN LOGGING AT Wed Mar 11 02:59:57 2009 Mar 11 07:31:19 03ghost 07org.openembedded.dreambox * rb0e2814a00 10openembedded.git/packages/enigma2/enigma2.bb: enigma2.bb:set rreplaces/rconflicts for softwaremanager to resolve installtion / enigma startup problems Mar 11 07:31:21 03ghost 07org.openembedded.dreambox * rb386c6b8e3 10openembedded.git/packages/dreambox/dreambox-dvb-modules.bb: dreambox-dvb-modules.bb: update dm800/dm8000 drivers Mar 11 07:31:22 03ghost 07org.openembedded.dreambox * r8ffb148879 10openembedded.git/packages/dreambox/dreambox-secondstage.bb: dreambox-secondstage.bb: update dm800/dm8000 secondstage loader Mar 11 07:31:25 03ghost 07org.openembedded.dreambox * rf35b908b77 10openembedded.git/packages/enigma2/enigma2.bb: enigma2.bb: push SRCDATE Mar 11 07:31:28 03ghost 07org.openembedded.dreambox * rae693705f0 10openembedded.git/packages/linux/ (linux-dm800.bb linux-dm800/dm800_defconfig): Mar 11 07:31:31 linux-dm800.bb: push revision Mar 11 07:31:33 dm800_defconfig: remove mem=128M ... the current secondstage sets this value Mar 11 07:31:35 03ghost 07org.openembedded.dreambox.release_25 * r7e06943098 10openembedded.git/packages/linux/ (linux-dm8000.bb linux-dm8000/dm8000_defconfig): Mar 11 07:31:38 linux-dm8000.bb: push revision Mar 11 07:31:40 dm8000_defconfig: remove mem=128M from kernel cmdline... the current secondstage loader sets this value now Mar 11 07:31:44 03ghost 07org.openembedded.dreambox.release_25 * r962ebc4af3 10openembedded.git/packages/linux/ (linux-dm800.bb linux-dm800/dm800_defconfig): Mar 11 07:31:49 linux-dm800.bb: push revision Mar 11 07:31:51 dm800_defconfig: remove mem=128M ... the current secondstage sets this value Mar 11 07:31:53 03ghost 07org.openembedded.dreambox * r678b29e5c8 10openembedded.git/packages/linux/ (linux-dm8000.bb linux-dm8000/dm8000_defconfig): Mar 11 07:31:56 linux-dm8000.bb: push revision Mar 11 07:31:58 dm8000_defconfig: remove mem=128M from kernel cmdline... the current secondstage loader sets this value now Mar 11 07:32:00 03ghost 07org.openembedded.dreambox.release_25 * rcc6f3d0f3f 10openembedded.git/packages/dreambox/dreambox-secondstage.bb: dreambox-secondstage.bb: update dm800/dm8000 secondstage loader Mar 11 07:32:03 03ghost 07org.openembedded.dreambox.release_25 * r09dd7439b2 10openembedded.git/packages/dreambox/dreambox-dvb-modules.bb: dreambox-dvb-modules.bb: update dm800/dm8000 drivers Mar 11 07:32:08 03ghost 07org.openembedded.dreambox.release_25 * r7ebca4e5f4 10openembedded.git/: Merge branch 'org.openembedded.dreambox.release_25' of git.opendreambox.org:git/opendreambox-1.5 into org.openembedded.dreambox.release_25 Mar 11 07:32:14 03Felix Domke 07org.openembedded.dreambox.release_25 * r6eea81063d 10openembedded.git/: Merge branch 'org.openembedded.dreambox.release_25' of git://git.opendreambox.org/git/ghost/opendreambox-1.5 into org.openembedded.dreambox.release_25 Mar 11 07:32:20 03ghost 07org.openembedded.dreambox.release_25 * rd516d68e18 10openembedded.git/packages/enigma2/enigma2.bb: enigma2.bb: push SRCDATE Mar 11 07:32:23 03ghost 07org.openembedded.dreambox.release_25 * r845b2a7e01 10openembedded.git/conf/distro/opendreambox-1.5.conf: opendreambox-1.5.conf: set correct feed for release 25 Mar 11 07:32:26 03Felix Domke 07org.openembedded.dreambox * r0df02fc696 10openembedded.git/: Merge branch 'org.openembedded.dreambox' of git://git.opendreambox.org/git/ghost/opendreambox-1.5 into org.openembedded.dreambox Mar 11 09:28:27 good morning Mar 11 09:30:48 morning :) Mar 11 09:37:41 Hi, I have got a challenge for someone: Getting proftpd in OE. http://sources.busybox.net/index.py/trunk/buildroot/package/proftpd/ Mar 11 09:38:40 that someone was me until I got stuck with an autotools issue :-) Mar 11 09:48:47 morning Mar 11 09:50:24 likewise: why profftpd, aren't there any others ? Mar 11 09:51:06 currently not on a linux box, so can't give it a try :-( Mar 11 09:51:10 good morning Mar 11 09:51:15 florian: hi Mar 11 09:53:12 hi blindman Mar 11 09:53:17 hi florian and effem Mar 11 09:53:36 hey woglinde, gm! Mar 11 09:56:33 to perform file system bench marking tests, what should be the mount options should i use -osync switch to mount Mar 11 09:56:48 eFfeM: we only have vsftpd and ftpd in OE, vsftpd does not allow out-of-system user-management. Mar 11 09:59:59 ah ok Mar 11 10:02:29 i tried bonnie++ i get a write speed of 1616K/s which is very low for a sdmmc card Mar 11 10:02:48 hm Mar 11 10:02:57 dzel I think it isnt slow Mar 11 10:03:56 i have seen some results which say they get write speed of 7 to 10 MBPS Mar 11 10:04:10 i think im not interpreting bonnie results properly Mar 11 10:06:17 woglinde: am i right? i think i should get somewhere close to 10mbps Mar 11 10:06:37 hm overhead of jffs2 Mar 11 10:07:04 morning all Mar 11 10:07:23 so how exactly are we supposed to interpret bonnie results Mar 11 10:07:23 he rp Mar 11 10:07:24 woglinde: jffs2 on sd? Mar 11 10:07:28 RP: hi! Mar 11 10:07:41 florian he didnt tell Mar 11 10:08:00 im using ext3 on sd card Mar 11 10:08:20 ah ok Mar 11 10:08:32 if i use dd i get a different result from bonnie Mar 11 10:09:04 guys, i need to go for a meeting, will be back soon Mar 11 10:09:08 sorry about this Mar 11 10:14:03 ~seen hrw Mar 11 10:14:27 hrw was last seen on IRC in channel #oe, 13h 57m 44s ago, saying: 'time for Leffe Blond and sleep'. Mar 11 10:18:57 morgen woglinde Mar 11 10:18:58 morning Mar 11 10:26:26 03Florian Boor 07org.openembedded.dev * r69a1526137 10openembedded.git/packages/gpe-scap/gpe-scap_svn.bb: gpe-scap: bump PV of svn recipe Mar 11 10:26:37 03Florian Boor 07org.openembedded.dev * re60f38e330 10openembedded.git/packages/gpe-scap/gpe-scap_1.4.bb: gpe-scap: Add 1.4 fixing MIPS target support. Mar 11 10:43:02 hello, I just start use openembedded recently. I encounter the problem that 'to find the package where some file or config file stores' very often. Is there any tip for overcome this inconvience? Thank you all ~ Mar 11 10:44:06 Mat0220 hm? Mar 11 10:44:15 I dont understand the question Mar 11 10:45:07 woglinde: hi, :-) Mar 11 10:45:11 woglinde: for example Mar 11 10:45:18 Mat0220: you mean 'to find which package contains file'? Mar 11 10:46:44 woglinde: "I hope to change 'resolv.conf', but need a long time to find the right package if I am not so familiar it directory structure " Mar 11 10:46:53 hrw: yes, thank you :-) Mar 11 10:47:44 base-files Mar 11 10:48:17 Mat0220: one option is: rm `find tmp/deploy/ -name Packages*`;bitbake package-index and then look into Packages.filelist files Mar 11 10:49:07 woglinde: thanks! Mar 11 10:49:22 hrw: cool! That what I want :-D Mar 11 10:49:34 woglinde: NOTE: package openjdk-6-cacao-jre-6b14-r0: task do_build: completed Mar 11 10:49:46 hrw cool Mar 11 10:49:53 Thank you all :-) Mar 11 10:49:59 robert was at this stage too Mar 11 10:50:13 woglinde: but he used OE rather then Poky Mar 11 10:50:14 I am building now for the n800 Mar 11 10:50:21 hrw ah gotcha Mar 11 10:50:41 and then try to get it compile within scratchbox2 Mar 11 10:50:56 woglinde: I am preparing some patches for Poky to make it more possible without extra patches Mar 11 10:51:20 hrw hm how did you geht the snmp error fixed? Mar 11 10:51:22 woglinde: openjdk-6 for example is not buildable at all under Poky due to lack of 'subdir' param in SRC_URI Mar 11 10:51:28 snmp error? Mar 11 10:51:33 and the compare_and_swap for long? Mar 11 10:51:42 the error you posted me yesterday Mar 11 10:51:42 woglinde: in? Mar 11 10:51:51 woglinde: ah.. retried Mar 11 10:53:45 for 2009 I hope the finish jigsaw process quick Mar 11 10:58:14 hm robert didnt the update the openjdk to 14b02 yet Mar 11 11:05:17 ok, time to add features to Poky again Mar 11 11:11:06 can why dd and bonnie report different values? has anyone used both for benchmarking Mar 11 11:11:36 dd is not benchmark, bonnie is Mar 11 11:16:38 bonnie is reporting write speed of 1616K/s but dd is reporting nearly 10mbps Mar 11 11:16:52 so i cannot correlate and see what is wrong Mar 11 11:17:56 sometime back somebody passed a comment saying 1616kb/s is perfectly normal Mar 11 11:18:04 so im confused Mar 11 12:00:03 sir, am i getting consused between MB/s which dd outputs and KBytes/s which bonnie reports? Mar 11 12:07:31 hi gnutoo Mar 11 12:07:43 hi Mar 11 12:08:09 woglinde: do you any ideas about the problem im facing? Mar 11 12:08:11 I will get a replacement for my bug device soon... Mar 11 12:12:52 Gnutoo yours is broken? Mar 11 12:13:24 yes,the screen is always white...they think it's the bug-base Mar 11 12:13:33 hm Mar 11 12:15:27 by the way I should check if the default libsdl-mixer compiles fine with libtool-1.x and if so make oe use the newer one... Mar 11 12:17:20 woglinde, by the way do you know any testing framework that can: *)apply a patch or a combination *)compiles qemu *)try to compile emacs and report if it succeed or fails...how do they do for compiling the cross-compiler...they may have similar software... Mar 11 12:17:37 aeh? Mar 11 12:17:55 ho sorry Mar 11 12:18:06 you have to write your own stuff Mar 11 12:19:47 ok but is there anything that I can use like libraries or program that would permit me to write only a small part for the custom stuff? Mar 11 12:21:17 I bet the answer is no Mar 11 12:21:21 hm you could use oe couldnt you? Mar 11 12:21:28 thanks a lot anyway Mar 11 12:22:00 good idea...maybe I should generate some recipes and bitbake them...it would be simplier Mar 11 12:22:20 s/simplier/more simple than executing bitbake's shell files Mar 11 13:18:14 hey python experts Mar 11 13:18:28 how do I check whether a variable has no value (NoneType) Mar 11 13:18:43 I need this to detect whether PARALLEL_MAKE is not set Mar 11 13:19:52 it is needed for this: Mar 11 13:19:52 pm = bb.data.getVar('PARALLEL_MAKE', d, 1); Mar 11 13:19:52 if : Mar 11 13:19:52 return "1" Mar 11 13:20:21 hm isnt this working? Mar 11 13:21:28 this? which this? Mar 11 13:23:08 ah Mar 11 13:23:09 hehe Mar 11 13:23:14 try if bb.data.getVar('PARALLEL_MAKE', d, 1) Mar 11 13:23:30 from autotools Mar 11 13:23:31 if bb.data.getVar('INHIBIT_AUTOTOOLS_DEPS', d, 1): return '' Mar 11 13:24:37 actually I need it the other way round, so Mar 11 13:24:37 if not pm: Mar 11 13:24:37 should do it Mar 11 13:28:15 do we support multiple checksums.ini files by now? Mar 11 13:28:24 (e.g. for overlays) Mar 11 13:31:24 no Mar 11 13:31:46 nope Mar 11 13:32:11 rschuster, OE devs are going to remove checksum.ini in a while Mar 11 13:32:31 then the problem will be "fixed" Mar 11 13:32:38 ah ok Mar 11 13:33:02 but as of today there is no way to use several chacksum files Mar 11 13:33:33 booxter: ok Mar 11 13:33:48 you can make 'cat checksum_overlay.ini >> checksum.ini' after you added new entry to your overlayed checksum.ini Mar 11 13:34:03 that's what I do on my overlayed project Mar 11 13:44:50 rschuster: hi Mar 11 13:45:31 hi marcin Mar 11 13:45:31 rschuster: have a moment? Mar 11 13:45:34 hrw: sure Mar 11 13:54:34 booxter, I do not see the checksums file being removed Mar 11 13:55:56 hi rschuster1 Mar 11 13:57:01 hi florian Mar 11 14:28:44 Crofton|work, I haven't said that it IS removed Mar 11 14:28:49 it WILL BE removed Mar 11 14:29:15 booxter, I do not think so Mar 11 14:29:23 I saw no conclusion from the discussion Mar 11 14:30:50 * mwester-laptop thinks we should leave checksums.ini the way it is, and focus all that energy on fixing some of the OTHER badly-broken policies with OE, like the one that encourages everyone to DELETE stuff at the drop of a hat. Mar 11 14:31:20 yep Mar 11 14:42:37 mwester-laptop, +1 Mar 11 14:42:53 although we do need a way to add another checksum.ini file for overlays Mar 11 14:43:11 True. But I thought we have some excellent suggestions on how to do that already. Mar 11 14:43:48 Someone should just commit a change with one of those suggestions for a local checksums.ini, and see if anyone howls. Mar 11 14:43:55 yep Mar 11 14:44:03 that is the only change we need Mar 11 14:44:24 the existing disable checksum code is good enough for users Mar 11 14:45:33 wtf Mar 11 14:45:54 where the hell ncurses-native gets this info Mar 11 14:45:58 BTW, just as a data point -- this past weekend someone pointed out a problem building something for SlugOS; it turned out that the upstream (official) package.tar.Z got swapped with an older version of same; that upstream error would never have been caught without the checksums.ini file. So I too am in favor of a simple solution to extend it, that does not force people to disable it. Mar 11 14:46:40 mwester, good to know the mechanism can caught upstream errors :) Mar 11 14:47:07 Someone fixed it in OE; but instead of changing the SRC_URI to point to a location that had the correct packages, they upgraded to the latest version and deleted all the older ones entirely. :( Mar 11 14:47:15 urg Mar 11 14:48:30 It turns out to be "no big deal" after a little testing, but it illustrates how the existing checksum.ini mechanism can force less-than-optimal behavior for other changes. Mar 11 15:22:58 hi thesing Mar 11 15:23:41 hi everybody Mar 11 15:23:45 morning guys Mar 11 15:24:09 'allo Mar 11 15:25:11 hi kergoth Mar 11 15:52:14 likewise, you need proftpd Mar 11 15:52:17 there is comes: Mar 11 15:52:26 03Frans Meulenbroeks 07org.openembedded.dev * rcab70860b8 10openembedded.git/ (conf/checksums.ini packages/proftpd/proftpd_1.3.2.bb): proftpd: yet another ftp daemon; created recipe Mar 11 15:52:53 i only build it, but did not test it; leaving that part up to you :-) Mar 11 16:12:46 ~seen mickey|zzZZzz Mar 11 16:12:49 mickey|zzzzzz is currently on #htc-linux (4d 9m 37s), last said: 'nytowl: for fso/ms5.5 you should also bump to the latest versions of frameworkd, libgsm0710mux, and fso-abyss'. Mar 11 16:13:10 ~seen mickeyl Mar 11 16:13:11 mickeyl was last seen on IRC in channel #oe, 5d 2h 26m 15s ago, saying: '~bon appetit'. Mar 11 16:13:17 eFfeM, mickey|zzZZzz mentioned he was going on vacation Mar 11 16:13:23 ah ok Mar 11 16:13:47 i have a python issue, but I am not really a python wiz Mar 11 16:14:11 oe zope-interface does not install in site-packages subdir Mar 11 16:14:25 but eFfeM is a python n00b Mar 11 16:16:20 So we can change whatever we want, at least until he gets back! :-D Mar 11 16:16:46 I am afraid of python :) Mar 11 16:17:14 mickeyl is on vacation this week Mar 11 16:18:39 woglinde: thanks Mar 11 16:18:56 will see if i can resolve it, or try to find another python wiz Mar 11 16:19:46 eFfeM: and it fails to run on target due to that? Mar 11 16:20:40 hrw, apparently if I install zopeinterface it installs in /usr/lib/python2.6/zope/interface and if i run coherence it says it cannot find it Mar 11 16:20:54 could also be something is wrong with the package itself Mar 11 16:21:28 Crofton|work: real programmers can write fortran in every language, even in python :-) Mar 11 16:22:26 * eFfeM has o'reilly's python cookbook, but no pots to cook in :-) Mar 11 16:22:56 * Crofton|work knows FORTRAN, well used to know Mar 11 16:23:00 hi ph5 Mar 11 16:24:04 eFfeM: recipe is zope or zope-interface? Mar 11 16:25:00 hrw, recipe is zope, it also generates python-zopeinterface Mar 11 16:25:06 ok Mar 11 16:25:10 building now Mar 11 16:25:20 * hrw do not know Python Mar 11 16:25:31 well it does build ! Mar 11 16:25:54 but patching etc is my life recently Mar 11 16:26:31 lol Mar 11 16:26:58 03Ulf Samuelsson 07ulf/atmel * r678732e083 10openembedded.git/packages/u-boot/u-boot_1.3.4.bb: Mar 11 16:26:58 Fix syntax error in u-boot-1.3.4 recipe Mar 11 16:26:58 Please enter the commit message for your changes. Lines starting Mar 11 16:27:13 i tried to move the dir to site-packages but that did not work, trying to install again Mar 11 16:28:53 angstrom feed is down ? Mar 11 16:29:06 being called for dinner, back in 30 mins or so Mar 11 16:52:28 hi woglinde Mar 11 17:21:38 Jay7: hi Mar 11 17:22:43 Would you guys here please put some load on linuxtogo.org? ;) Mar 11 17:23:36 what kind of load? Mar 11 17:23:52 hello, is there some info on mingw and openembedded somewhere? Mar 11 17:23:54 florian: forkbomb is enough? Mar 11 17:23:54 florian: hey :) Mar 11 17:24:18 apache benchmark? :) Mar 11 17:24:26 hrw: send some emails, browse the webserver... pull some git trees... Mar 11 17:25:13 well, now I see loading on sdb too :) Mar 11 17:25:14 florian: we have git there? /me never pulled Mar 11 17:25:56 * pH5 uses the opportunity to run git gc on his kernel tree Mar 11 17:26:04 Jay7: moved /var/lib to the second disk. It took ages... the disk performance sucks. Mar 11 17:26:17 more precisely: which distro should I select for mingw? Mar 11 17:26:27 hrw: see http://git.linuxtogo.org Mar 11 17:26:58 florian: ssh at least behaves more interactively than yesterday :) Mar 11 17:27:21 Jay7: yes.. the webserver too, but the load is quite low currently. Mar 11 17:27:45 well.. we need publish some news on linuxdevices.com ;) Mar 11 17:27:49 Jay7: I have changed some parameters for memory management too Mar 11 17:28:38 * florian thinks that would be a good idea but we'd had to create some content to write about first Mar 11 17:29:46 omg.. Mar 11 17:29:53 huhu... a gzip attack ;) Mar 11 17:30:03 runnable in vmstat is very big :) Mar 11 17:30:25 indeed Mar 11 17:30:41 but system load is low enough Mar 11 17:31:10 http://git.linuxtogo.org/ do not respond Mar 11 17:31:11 wait and system in top Mar 11 17:31:26 http://linuxtogo.org/ do not responding too Mar 11 17:31:56 gzip attack eats apache :) Mar 11 17:32:21 so my puf has not chance;( Mar 11 17:33:51 nice load Mar 11 17:38:40 gitwebs seems to be really evil :) Mar 11 17:39:09 I had 200 threads on git.linuxtogo.org Mar 11 17:39:13 changed it to 2000 now Mar 11 17:40:37 hi everybody Mar 11 17:41:18 ah that's why projects is that slow ;) Mar 11 17:41:22 hi chouimat|away Mar 11 17:41:29 ah the other one :-) Mar 11 17:41:48 florian: you asked for load ;D Mar 11 17:42:08 I love puf util Mar 11 17:42:10 florian: hehe :) Mar 11 17:42:28 I used it a lot years ago to fetch websites for coverCD for magazine Mar 11 17:43:52 Its good to see that the CPU is used pretty well by now instead of waiting for I/O only. Mar 11 17:44:38 hrw: you could try the same with projets.linuxtogo.org once the current run in finished Mar 11 17:45:18 why not at same time? Mar 11 17:45:56 hum why not? the load is 21 only Mar 11 17:46:00 :) Mar 11 17:46:41 woglinde, hi, did you cross-compile using mingw? Mar 11 17:48:18 puf warning: connect to 'git.linuxtogo.org' timed out Mar 11 17:48:46 started also projects Mar 11 17:48:55 Ah... that migth be the apache configuration not allowing more clients. Mar 11 17:48:59 * hrw -> off Mar 11 17:49:19 have a nice rest of day Mar 11 17:49:29 hrw|gone: thanks - same to you! Mar 11 17:49:34 florian: they will get killed in half hour Mar 11 17:49:50 18:49 hrw@home:~$ sleep 180;killall -9 puf Mar 11 17:50:35 hrw|gone: ehh... better add another '0' :) Mar 11 17:55:00 has anyone had success with rosetta in recent builds? It is segfaulting for me on my beagle and overo builds :-( Mar 11 18:17:15 florian: limit connections from same ip :) Mar 11 18:17:34 but sufficient for proxies and NAT's Mar 11 18:24:30 Jay7: :-) Mar 11 18:32:58 bbl Mar 11 18:34:44 florian: argh.. right Mar 11 18:40:50 hm wt moved to version 2.99 but this version has incompatibilities with the previous version, should I create a new package (e.g. wt3 as 2.99 already has the incompatibilities wiich are for 3.0) or should we just make a new wt version? Mar 11 18:41:01 i doubt if wt is in heavy use Mar 11 18:49:38 eFfeM: I think just adding new recipe for new version should be ok Mar 11 18:52:18 ok, more opinions? (or should i better post this q to the mailing list) Mar 11 19:01:28 cbrake: ping Mar 11 19:02:02 garren: hello Mar 11 19:02:27 garren: mono built for the beagleboard for me, but I did not run on target yet. How did your tests go? Mar 11 19:02:27 cbrake: thanks for the help with mono it compiled fine for the beagle... Mar 11 19:03:13 It runs on the target but the only problem is I wrote a small app using gtk version 2.12 and it cant find it on the target Mar 11 19:03:50 garren: there is an old gtk-sharp recipe that probably needs updated Mar 11 19:04:06 cbrake: oh I see a package for 2.10.2 Mar 11 19:04:17 of gtk-sharp will it be compatible? Mar 11 19:11:49 good morning all Mar 11 19:12:00 err, greetings Mar 11 19:13:54 questions about a device i'd like to categorize, can anyone help? Mar 11 19:14:07 cbrake: how hard will it be to upgrade the recipe to a later gtk-sharp? Mar 11 19:14:12 curious if I have a chance of installing anything besides Windows CE on it Mar 11 19:14:39 garren: copy the recipe, change the file name, and any version info in the recipe, and try to build it :-) Mar 11 19:14:47 garren: if it works, send me a patch and I'll push it Mar 11 19:14:57 garren: otherwise, I'll help you debug it Mar 11 19:14:57 ok will try Mar 11 19:15:08 cbrake: great thanks Mar 11 19:16:13 Device: NEC Panel-i 6, Intel XScale PXA270 520MHz, 64MB ROM, 128 RAM Mar 11 19:16:21 Am I in the wrong place here? Mar 11 19:36:32 cbrake: just trying to get the version right is these the sources I must point gtk-sharp to http://ftp.novell.com/pub/mono/sources-stable/? Mar 11 19:40:07 what do I do with this opkg remove error message: pkg_run_script: ERROR: uninstalled package python-coherence has a NULL tmp_unpack_dir Mar 11 19:40:16 is this something wrong in the recipe ? Mar 11 19:44:21 is there a package on oe for python-multiprocessing? Mar 11 19:45:31 CIA-2 - koen - are you "here"? Mar 11 19:45:38 err... Mar 11 19:45:43 koen - are you here? Mar 11 19:49:13 ~seen koen Mar 11 19:49:29 koen was last seen on IRC in channel #oe, 454d 9h 43m 6s ago, saying: 'I forgot to commit that portion yesterday'. Mar 11 19:49:33 robtow: ask in #beagle Mar 11 19:49:35 like2wise: Koen is on Bossa now Mar 11 19:49:51 ah Mar 11 19:49:58 lucky chap Mar 11 19:50:51 would someone bite when I offer a small recipe bounty (EUR25 for a proftpd recipe that works)? Mar 11 19:51:48 03Frans Meulenbroeks 07org.openembedded.dev * r3e60916fa5 10openembedded.git/packages/python/python-coherence_0.6.2.bb: python-coherence: updated DEPENDS (removed unneeded zope, added a few missing ones) Mar 11 19:51:48 03Frans Meulenbroeks 07org.openembedded.dev * r15fe207f42 10openembedded.git/packages/zope/zope_3.3.1.bb: zope: added __init__.py* files to python-zopeinterface, otherwie the package does not work! Mar 11 19:51:54 03Frans Meulenbroeks 07org.openembedded.dev * r706987bb34 10openembedded.git/packages/python/python-coherence_0.6.0.bb: python-coherence_0.6.0.bb: removed (should have been moved to 0.6.2 but a new 0.6.2 was made, so dropping this one now) Mar 11 19:51:59 like2wise Mar 11 19:52:05 eFfeM: yes? Mar 11 19:52:06 like2wise, i bite Mar 11 19:52:20 he bit (past tense) ;) Mar 11 19:52:23 the recipe is already checked in, did so about 2 hrs ago (see the log) Mar 11 19:52:45 eFfeM: haha, brilliant. If it works, the bounty is yours Mar 11 19:52:48 it builds without problem, haven't tested it Mar 11 19:53:13 lol, the bounty is not needed, it was a piece of cake :-) Mar 11 19:53:20 eFfeM: you see, a colleague is strungling with proftpd, another with ixp4xx/uclibc and I absolutely have zero time at this moment Mar 11 19:54:09 eFfeM: what was the issue with autotools? Mar 11 19:54:17 actually noticed that the install file just said: run configure, and did not mention running automake, so I just created a bare bones recipe without inherit autotools Mar 11 19:54:32 eFfeM: haha, RTFM issue Mar 11 19:54:37 yes Mar 11 19:55:04 eFfeM: maybe I can send you some hardware or something then? any needs? Mar 11 19:55:05 i struggled for 15 minutes with it, patching configure.in etc then read the file and got it right the first time Mar 11 19:55:25 eFfeM: so a good OE hacker should earn EUR 100 / hour, you just proved it Mar 11 19:55:27 it might be that an additional .conf file or so needs to be added to the recipe, haven't really checked that Mar 11 19:55:28 :-) Mar 11 19:55:32 lol Mar 11 19:55:39 are you offering a job ? Mar 11 19:55:42 eFfeM: an Amazon book maybe? Mar 11 19:55:47 eFfeM: not yet :-) Mar 11 19:56:11 eFfeM: interested in OE work? Mar 11 20:00:58 :) Mar 11 20:02:03 100 eur/h is good rate. but finding customer for it is not so good Mar 11 20:05:34 cbrake: could you look at this a install error http://pastebin.com/d70f8e3ad Mar 11 20:05:54 hrw: haha, it was a joke based on the EUR25 bounty matched in 15 minutes. Mar 11 20:06:00 I know ;d Mar 11 20:06:36 like2wise: but bounties are good thing Mar 11 20:07:10 * hrw -> sleep Mar 11 20:07:13 gn Mar 11 20:09:26 hrw|gone: fixed the python-zopeinterface problem Mar 11 20:09:35 hrw: zzz tight Mar 11 20:09:38 arg Mar 11 20:09:54 * kergoth really needs to get a version of bb.data that tracks variable refs Mar 11 20:09:56 kergoth: $0 ? Mar 11 20:10:33 * kergoth thinks about trying to wrap the existing bb.data and add tracking rather than trying to replace the thing Mar 11 20:11:01 garren: I don't have any ideas offhand Mar 11 20:11:37 garren: that portion of the install is trying to automatically determine dependencies, so perhaps that is broke Mar 11 20:11:55 garren: let me kick off a build here Mar 11 20:12:05 cbrake: yeah I think so... Mar 11 20:12:55 cbrake: the only cahnges I've done is bump the version to 2.12.7 and add that file to the checksums.ini Mar 11 20:16:54 garren: this could be kind of nasty Mar 11 20:17:44 garren: one thing you might try is remove the "inherit mono" as that is what does the auto depends stuff Mar 11 20:17:49 garren: but that may break other things Mar 11 20:18:01 garren: I'm building a bunch of dependencies right now Mar 11 20:20:30 cbrake: yeah it doesn't look like a simple error... whats the easiest approach to debugging this Mar 11 20:22:15 garren: figure out what commands the mono class is running, and then trace through what it is doing Mar 11 20:22:27 garren: its likely just a path issues or something Mar 11 20:22:47 hmmm Mar 11 20:22:51 cbrake: ok Mar 11 20:22:54 garren: I would try without the mono class first though Mar 11 20:23:06 cbrake: ok i'll try that now Mar 11 20:26:10 cbrake: I'm trying again without mono and mono-native Mar 11 20:26:12 re Mar 11 20:31:57 cbrake: I get the same compile error Mar 11 20:42:21 garren: ok, I'm caught up with you. I'll look at it some over the next day -- I don't have any ideas yet without digging in first Mar 11 20:43:15 cbrake: cool. I've got to go but will keep trying from my side. If you make any progess please let me know. Thanks for the help sp far :-) Mar 11 20:46:42 garren: sure, catch you later Mar 11 20:55:56 florian, ping Mar 11 20:56:26 john3909: pong Mar 11 20:57:06 There is no checksum for gpe-scape-1.4 in checksum.ini Mar 11 20:57:33 args Mar 11 20:57:37 * florian fixes Mar 11 21:07:22