**** BEGIN LOGGING AT Sun May 27 02:59:59 2012 May 27 12:00:59 ping khem May 27 14:06:00 all my auctions on ebay end in the next hour if anyones interested: atccss.net/index.php?p=4sale May 27 15:03:30 ccssnet, just had a look, are you sure you own a 3G ram ? May 27 15:17:22 GNUtoo-desktop: I am travelling these days so less connectivity May 27 15:18:36 ok May 27 15:18:57 btw did you make any progress in disabling thumb May 27 15:19:00 khem, removing ld-is-gold from arm in general but not x86 in SHR didn't fix it May 27 15:19:13 hmmm May 27 15:19:20 same illegal instruction or segfault May 27 15:19:24 ok May 27 15:19:33 so it seems something else is in play here May 27 15:19:37 yes May 27 15:19:42 probably gcc 4.7 May 27 15:19:47 yes May 27 15:19:55 ok can you confirm that it works with denzil branch ? May 27 15:20:01 yes I can May 27 15:20:31 I compiled both firefox and chromium on the work laptop with denzil branch and I checked both on target May 27 15:20:39 exact same recipe fails on master May 27 15:20:46 ok May 27 15:20:50 with some minor changes for chromium tough May 27 15:21:00 just to make some -Werror go away May 27 15:21:36 hmm May 27 15:22:11 can you run the chromium binaries built with denzil branch on image from master ? May 27 15:22:29 that will narrow it down to gcc-4.7+chromium May 27 15:22:38 then we can start digging deeper May 27 15:22:52 yes give me some minutes May 27 15:22:55 ok May 27 15:25:26 hmmm I built for armv6 on denzil May 27 15:25:47 I guess it's a problem May 27 15:30:02 khem, I guess the armv6 binaries are useless right? May 27 15:30:17 or should I still try them? May 27 16:00:44 khem, could my _init() segfault bug be related to that: May 27 16:00:47 http://sourceware.org/bugzilla/show_bug.cgi?id=14052 May 27 16:00:54 I'll check my LD version May 27 16:01:37 the bad versions are: May 27 16:01:38 ld-2.22.52.0.[12] May 27 16:01:49 hiho May 27 16:02:16 hi May 27 16:02:34 GNU gold (GNU Binutils 2.22) 1.11 May 27 16:02:47 how to get the rest of the version?> May 27 16:02:52 s#>## May 27 16:04:07 khem, I found that by chance by looking at the kernel commits May 27 16:04:08 5d1204582e7bc0682fb019e5666bd62cc27260b4 May 27 17:07:07 lautriv: yes 3 1gb sticks of ram. o well now, auctions ended. but in general, i have about 12gb of ram here for sale. mostly server May 27 21:03:05 khem, ping May 27 21:03:16 khem, both denzil binaries works on SHR May 27 21:03:31 s/both/the two / May 27 21:12:31 GNUtoo-desktop, are you used to usbserial ? May 27 21:13:43 not very May 27 21:13:44 why? May 27 21:14:19 what's the difference with cdc_acm? May 27 21:15:41 GNUtoo-desktop, i load usbserial and g_serial (gadget) but see nothing with lsusb on the host, kernel's commandline is console=ttyGS0,115200 May 27 21:17:20 1) what's your setup May 27 21:17:26 2) I never used g_serial May 27 21:18:20 setup is a plain console-image (angstrom) on hx4700 with kernel3.0.1 May 27 21:18:49 i had this all up in the past but lost some fineprint in the meanwhile May 27 21:19:07 did you compile the kernel yourself? May 27 21:19:12 because you have many issues May 27 21:19:28 and I think you should decide about the right order to solve them May 27 21:20:30 haha, the right order is to get something on the screen (serial console) to react on. May 27 21:20:57 Hi May 27 21:21:05 ok so you want to solve your compilation issue first May 27 21:21:07 it's easy May 27 21:21:12 I gave you a patch May 27 21:21:17 did it work May 27 21:21:18 or not May 27 21:21:28 if it didn't work it's way harder May 27 21:23:04 hello there May 27 21:23:15 GNUtoo-desktop, patch did nothing but a native compiler did the trick, the image and kernel are booting but something is not proper, i assume to have some bad defaults but hard to debug on a touchscreen without keyboard with 800x600 res. May 27 21:23:47 bad defaults? May 27 21:23:56 you need to use the same config on both sides May 27 21:23:59 to findout the problem May 27 21:25:15 GNUtoo-desktop, g_serial is CDC_ACM && CDC_OBEX , but it should report some serial-device on usb.......i could imagine that systemd makes problems. May 27 21:25:55 hmmm May 27 21:25:58 systemd is userspace May 27 21:26:15 since you have a working setup try the working kernel with the current userspace May 27 21:26:16 i just done this http://paste.ubuntu.com/1009454/ May 27 21:27:03 but i don't know where to find my enigma2.ipk May 27 21:27:04 what is enigma2? May 27 21:27:15 it's in your deploy dir May 27 21:27:30 where ? May 27 21:27:59 do you know where the workdir is May 27 21:28:02 or the builddir May 27 21:28:36 GNUtoo-desktop, is there some image still running with sysV and inittab instead systemd ? May 27 21:29:27 yes there are May 27 21:29:51 it's still possible to run without systemd May 27 21:29:55 we do that at work May 27 21:30:12 do you mean here : ~/Desktop/Dreambox/opendreambox/build/dm800 May 27 21:30:15 ? May 27 21:30:23 do an ls inside that dir May 27 21:30:49 bitbake.lock conf mumudvb Packages.filelist pseudodone May 27 21:30:53 for ls May 27 21:31:11 ls mumudvb ? May 27 21:31:54 aclocal.m4 ChangeLog config.log config.status configure configure.ac COPYING depcomp doc doxygen install-sh Makefile Makefile.am Makefile.in missing README README-fr scripts src May 27 21:32:22 hmmm May 27 21:32:29 and in ~/Desktop/Dreambox/opendreambox/build ? May 27 21:32:40 else you could do a find May 27 21:32:49 because I know the usual structure May 27 21:33:04 but the problem is that I don't know where opendreambox script put that structure May 27 21:33:17 dm800 May 27 21:34:08 for ls May 27 21:34:22 yes, ls inside May 27 21:34:45 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox/build/dm800# ls May 27 21:34:45 bitbake.lock conf mumudvb Packages.filelist pseudodone May 27 21:35:02 no in build May 27 21:35:03 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox/build# ls May 27 21:35:03 dm800 May 27 21:35:08 ah ok May 27 21:35:16 then do a find -name "*.ipk" May 27 21:35:19 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox# ls May 27 21:35:20 bitbake bitbake.env build conf cross-compile.env doc LICENSE Makefile meta-bsp meta-opendreambox meta-openembedded openembedded-core scripts sources sstate-cache tmp May 27 21:35:21 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox# May 27 21:35:32 ok let me read it May 27 21:35:39 and try not to past too much lines at once May 27 21:35:53 cd tmp May 27 21:35:54 ls May 27 21:36:04 then it should be inside tmp May 27 21:36:07 ok May 27 21:36:07 like that: May 27 21:36:32 but paste the ls of inside tmp first May 27 21:36:57 like what ? May 27 21:37:05 i don't received May 27 21:37:27 ls /home/debianser/Desktop/Dreambox/opendreambox/tmp May 27 21:38:10 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox# ls /home/debianser/Desktop/Dreambox/opendreambox/tmp May 27 21:38:11 abi_version cache cooker.log.20120526095220 cooker.log.20120526214228 cooker.log.20120526215409 cooker.log.20120527003145 cooker.log.20120527003543 qa.log stamps work-shared May 27 21:38:12 buildhistory ccache cooker.log.20120526095838 cooker.log.20120526215013 cooker.log.20120527000339 cooker.log.20120527003235 deploy saved_tmpdir sysroots May 27 21:38:13 buildstats cooker.log.20120526095217 cooker.log.20120526095840 cooker.log.20120526215235 cooker.log.20120527003137 cooker.log.20120527003534 pkgdata sstate-control work May 27 21:38:27 that was too much lines May 27 21:38:31 use a pastebin next time May 27 21:38:32 anyway May 27 21:39:41 cd /home/debianser/Desktop/Dreambox/opendreambox/tmp/deploy/ipk May 27 21:39:44 hi ant May 27 21:39:56 and you'll see your'll see some directories May 27 21:40:09 I think the opendreambox is mips according to your log May 27 21:40:21 so go in the mips directory and you'll find the ipk May 27 21:41:02 you can export the dirs via webserver too May 27 21:41:13 yes that's what I do May 27 21:41:14 done GNUtoo-desktop May 27 21:42:22 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox/tmp/deploy/ipk/dm800# e May 27 21:42:23 e2freefrag e2undo editor else env eps2eps esac evince-thumbnailer exicyclog exim_convert4r4 eximstats exiqsumm export May 27 21:42:24 e2fsck ebb editres enable envsubst epspdf etex evolution exigrep exim_dbmbuild exim_tidydb exit expr May 27 21:42:26 e2image echo egrep enc2xs eog epspdftk eval evolution-settings exim exim_dumpdb exinext exiwhat extractbb May 27 21:42:27 e2label ed eject enchant epiphany epstopdf evince ex exim4 exim_fixdb exipick expand May 27 21:42:28 e2pall edit elif enchant-lsmod epiphany-browser eqn evince-previewer exec exim_checkaccess exim_lock exiqgrep expiry May 27 21:42:29 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox/tmp/deploy/ipk/dm800# e May 27 21:42:29 oh no May 27 21:42:35 stupid May 27 21:42:40 I already told him to use a pastebin May 27 21:42:46 when he pasted too much lines May 27 21:42:52 i ok next time May 27 21:42:54 sure May 27 21:43:07 gnutoo yeah thats why I called it supid May 27 21:44:54 what i have to do now ? May 27 21:45:11 I dont know what you want to do May 27 21:45:12 i still can't enigma2 on May 27 21:45:35 you have to export the dirs via a webserver May 27 21:45:42 why ? May 27 21:45:46 azertyu, do a find -name "*.ipk" | grep enigma or to do like woglinde suggested May 27 21:45:47 and it to the opkg.conf files May 27 21:45:54 and use opkg via network May 27 21:46:09 or copy over the ipkg with scp or via sdcard May 27 21:46:32 later is maybee more pain May 27 21:46:36 to get all deps May 27 21:48:53 http://paste.ubuntu.com/1010375/ May 27 21:49:15 cd .. May 27 21:49:18 and redo the find May 27 21:50:20 http://paste.ubuntu.com/1010378/ May 27 21:50:21 redone May 27 21:51:16 hmm May 27 21:51:24 I suggest the webserver approach May 27 21:51:32 since you may have a ton of dependencies May 27 21:52:13 well May 27 21:52:30 now what i m looking to do is May 27 21:52:51 it is just to compile mumudvb to my dreambox dm800 May 27 21:53:09 so i just download the source code from here May 27 21:53:14 bitbake mumudvb May 27 21:53:39 http://gitweb.braice.net/gitweb?p=mumudvb;a=snapshot;h=1.6;sf=tgz May 27 21:53:54 then tar -zxvf mumu May 27 21:54:00 or write a recipe May 27 21:54:06 if there is not one May 27 21:54:50 just a sec May 27 21:55:02 once i unzip mumudvb May 27 21:55:13 i got all these files and folders aclocal.m4 ChangeLog config.log config.status configure configure.ac COPYING depcomp doc doxygen install-sh Makefile Makefile.am Makefile.in missing README README-fr scripts src May 27 21:56:25 so write a recipe which inherits autotools May 27 21:56:31 thats not to complicate May 27 21:56:31 just a sec May 27 21:56:40 and you have dozen examples in oe-core May 27 21:57:05 once after source bitbake.env May 27 21:58:40 im trying to add a layer for my pogoplug pro, used rasppi as a starting point and added kernel, features, tune, etc May 27 21:58:42 i put mumudvb here May 27 21:58:51 /home/debianser/Desktop/Dreambox/opendreambox/build/dm800/mumudvb May 27 21:58:51 doing this from within a schroot. and i get: ERROR: Unable to determine endianness for architecture 'INVALID' May 27 21:59:03 is that related to my layer, or my build environment? May 27 21:59:19 its a i386 schroot running on an amd64 host May 27 21:59:30 but i can't run bitbake mumudvb May 27 21:59:35 i got this error ; May 27 21:59:53 http://paste.ubuntu.com/1010387/ May 27 22:00:07 what is this ? i still don't understand it May 27 22:00:40 BitBake must be run from within your build directory May 27 22:01:01 /home/debianser/Desktop/Dreambox/opendreambox/"""""build""""/dm800/mumudv May 27 22:02:53 m4t, it means that some variables were not set May 27 22:03:11 even this things not working May 27 22:03:13 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox# bitbake build/dm800/mumudvb/ May 27 22:03:14 Unable to find conf/bblayers.conf May 27 22:03:16 BitBake must be run from within your build directory May 27 22:03:18 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox# May 27 22:03:35 http://paste.ubuntu.com/1010388/ May 27 22:03:49 GNUtoo-desktop , any way to figure out which? May 27 22:04:21 yes, the endianess variable May 27 22:04:30 it should be overrided May 27 22:04:32 and it's not May 27 22:04:36 azertyu you are funny May 27 22:04:37 so you're doing something wrong May 27 22:04:49 tell me what's wrong ? May 27 22:05:02 m4t, try to do a layer from scratch....it seem easier May 27 22:05:13 azertyu -> /home/debianser/Desktop/Dreambox/opendreambox May 27 22:05:14 all what you need is conf/bblayer.conf May 27 22:05:27 -> bitbake mumudv May 27 22:05:37 gnutoo first he was an on the wrong dir May 27 22:05:47 now he made the wrong command May 27 22:06:40 do i need to add it to layers.txt? May 27 22:06:52 even that not working woglinde May 27 22:06:53 http://paste.ubuntu.com/1010393/ May 27 22:07:00 ok May 27 22:07:12 azertyu did you follow any manual? May 27 22:07:19 m4t, let me look May 27 22:07:22 yes yours May 27 22:07:24 thanks May 27 22:07:48 from here : http://dreamboxupdate.com/download/opendreambox/2.0.0/doc/opendreambox.pdf May 27 22:08:01 m4t, sorry it's conf/layer.conf May 27 22:08:07 no, I meant to setup your oe build enviroment May 27 22:08:12 m4t, : May 27 22:08:22 basically inside the layer create a conf/layer.conf May 27 22:08:32 conf/bblayers.conf? May 27 22:08:42 i have a layer.conf May 27 22:08:50 ok May 27 22:09:05 and conf/bblayer.conf is for including the layer May 27 22:09:25 o.O May 27 22:09:32 cross talking? May 27 22:09:47 what i have to do ? May 27 22:10:26 add it to EXTRALAYERS eh? May 27 22:11:45 why i got that error ? May 27 22:11:54 Unable to find conf/bblayers.conf May 27 22:12:01 weee there we go. May 27 22:12:06 :-) thanks GNUtoo-desktop May 27 22:12:34 azertyu did you run the enviroment .sh file? May 27 22:13:03 yes i just run this command May 27 22:13:05 source bitbake.env May 27 22:13:30 okay May 27 22:13:41 did you checked if bitbake.env is correct? May 27 22:13:46 meh sorry to redirect stderr: ERROR: Failure expanding variable None, expression was ${@bb.fetch.get_checksum_file_list(d)} which triggered exception FetchError: Fetcher failure for URL: 'git://gitorious.org/opie/opie.git;protocol=git;subpath=noncore/apps/opie-reader;name=first'. Please set SRCREV to a valid value May 27 22:13:51 maybee you have to run cross-compile.env too May 27 22:14:59 m4t what you want todo? May 27 22:15:13 bitbake console-image May 27 22:15:29 for what? May 27 22:15:37 pogoplugpro i added.. May 27 22:15:53 not working May 27 22:16:01 i also add this command May 27 22:16:06 source cross-compile.env May 27 22:16:09 but not working May 27 22:16:23 i still got this error Unable to find conf/bblayers.conf May 27 22:16:28 m4t, btw is the sheevaplug and pogoplug not supported yet? May 27 22:16:31 what the hell that means ? May 27 22:16:35 GNUtoo-desktop yep May 27 22:16:39 ok May 27 22:16:55 well oxnas machine was supported up until '10 or something May 27 22:17:07 azertyu did you checked if bitbake.env is correct? May 27 22:17:11 this isnt sheeva though May 27 22:17:14 not marvell May 27 22:17:17 oxford semi May 27 22:17:23 no upstream kernel support May 27 22:17:31 what do you mean by correct May 27 22:17:41 *sigh* May 27 22:17:48 are you asking to check if bitbake is working correctlY ? May 27 22:17:53 no May 27 22:18:03 check if the env-variable are set correctly May 27 22:18:03 or what to check ? May 27 22:18:13 how ? May 27 22:18:15 and the dont point to rm May 27 22:18:19 or /dev/null May 27 22:18:26 m4t, ok May 27 22:18:27 just open the file and you will see May 27 22:19:14 bitbake cannt work correctly if the env-variables are pointing to wrong dirs May 27 22:19:35 which file i have to open ? May 27 22:20:05 bitbake.env May 27 22:20:46 i just removed the opie layer from bblayer.conf May 27 22:20:47 ok i got just only this line : export PATH=/home/debianser/Desktop/Dreambox/opendreambox/openembedded-core/scripts:/home/debianser/Desktop/Dreambox/opendreambox/bitbake/bin:${PATH} May 27 22:20:53 something is broken in git ? May 27 22:21:10 m4t, why? May 27 22:21:15 azertyu okay May 27 22:21:19 i dunno why, i didnt break it... May 27 22:21:30 but if it errors on parsing the recipe there is a problem May 27 22:21:41 m4t, what recipe? May 27 22:21:52 didnt say May 27 22:22:01 azertyu than try to check conf/local.conf May 27 22:22:04 something in opie May 27 22:22:18 if all variables which contains dirs are poiting to the right dirs May 27 22:22:24 im using the next branch btw May 27 22:22:27 in angstrom May 27 22:22:48 i don't have local.conf i just only got this one : opendreambox.conf May 27 22:22:56 azertyu and cross-compile.env too May 27 22:23:10 than check opendreambox.conf May 27 22:24:00 woglinde: for opendreambox.conf May 27 22:24:02 http://paste.ubuntu.com/1010410/ May 27 22:24:55 okay thats looks good May 27 22:24:59 this is for cross-compile.env : http://paste.ubuntu.com/1010412/ May 27 22:25:04 besides the one threads May 27 22:25:20 which could be set a bit higher if you have more procs May 27 22:27:03 i don't know May 27 22:27:22 azertyu okay forget cross-compile.env May 27 22:28:04 azertyu paste conf/bblayers.comf May 27 22:28:07 ups conf May 27 22:28:54 i don't have that file May 27 22:29:09 root@debianser:/home/debianser/Desktop/Dreambox/opendreambox/conf# ls May 27 22:29:11 opendreambox.conf May 27 22:29:24 as i said before i just only got opendreambox.conf May 27 22:30:33 azertyu hm okay than the manual is wrong or to old May 27 22:31:19 you never build .ipk package for opendreambox ? May 27 22:32:45 ok it is here May 27 22:32:46 oot@debianser:/home/debianser/Desktop/Dreambox/opendreambox# find -name *bblayers* May 27 22:32:48 ./.deps/.bblayers.conf.dm800.946165a6deca7c05e5d29ac29d9b7af9 May 27 22:32:49 ./build/dm800/conf/bblayers.conf May 27 22:32:51 ^C May 27 22:34:05 pastebin for bblayers http://paste.ubuntu.com/1010416/ May 27 22:34:44 okay May 27 22:34:52 try to go to /build/dm800/ May 27 22:35:04 and try bibake bubudvd there May 27 22:37:20 ok now i got this error : http://paste.ubuntu.com/1010419/ May 27 22:37:41 sigh May 27 22:37:48 //////////////////////////////////////////// May 27 22:37:59 only the name May 27 22:38:03 no version May 27 22:38:08 no trailing slash May 27 22:38:19 * GNUtoo-desktop hopes there is a recipe for bubudvd May 27 22:38:55 its building May 27 22:38:56 whee May 27 22:39:04 my last oe build is from like '09 May 27 22:39:08 before it became oe-core... May 27 22:39:14 what is an receipe ? May 27 22:39:21 i still maintain it with security/kernel updates May 27 22:39:23 any .bb file May 27 22:39:29 is a recipe May 27 22:39:30 dht-walnut, ppc405 May 27 22:39:45 had like 650days uptime before the battery in my UPS died May 27 22:39:57 what's that for ? May 27 22:40:08 o.O May 27 22:40:30 a recipes got your sw build May 27 22:40:40 good nite May 27 22:41:06 anyone there ? May 27 22:41:45 ERROR: Nothing PROVIDES 'mumudvb/' May 27 22:41:50 what's that mean ? May 27 22:42:18 have i need to change mumudvb sources code to an other ? May 27 22:42:21 azertyu, remove the last \ May 27 22:42:23 oops May 27 22:42:26 azertyu, remove the last / May 27 22:42:50 give me samething May 27 22:42:52 ERROR: Nothing PROVIDES 'mumudvb' May 27 22:43:19 then as woglinde said you have to make a recipe May 27 22:43:24 if there isn't one already May 27 22:43:53 how to making a recipe May 27 22:44:03 i don't know May 27 22:45:47 I think the wiki + http://www.yoctoproject.org/documentation have some documentation May 27 22:46:05 basically the key point is to add that line in the recipe: "inherit autotools" May 27 22:46:11 it's not the only thing to add tough May 27 22:46:21 now I've to debug that: May 27 22:46:32 mmc0: host doesn't support card's voltages May 27 22:47:03 http://www.openembedded.org/wiki/How_to_create_a_bitbake_recipe_for_dummies ? May 27 22:48:12 basically add DESCRIPTION HOMEPAGE LICENSE LIC_FILES_CHKSUM DEPENDS SRC_URI SRC_URI[md5sum] SRC_URI[sha256sum] and "inherit autotools" May 27 22:48:29 I hope I didinf't forget one May 27 22:48:35 else look at existing recipes May 27 22:48:37 well i just find this : http://mumudvb.braice.net/mumudrupal/node/34 May 27 22:49:08 there that one tell that he add recipe May 27 22:49:13 and give this link May 27 22:49:18 yes May 27 22:49:28 http://git.opendreambox.org/?p=ghost/opendreambox-1.6;a=summary May 27 22:49:32 then all that you have to do is to convert the recipe May 27 22:49:46 i don't how it works May 27 22:49:57 http://git.opendreambox.org/?p=ghost/opendreambox-1.6;a=tree;f=recipes/mumudvb;h=d9f714585d68e12313a5bf36ef4842cafb8592b4;hb=HEAD May 27 22:49:59 copy the files May 27 22:50:15 remove the do_stage May 27 22:50:43 then add the following variables: May 27 22:50:55 LICENSE LIC_FILES_CHKSUM SRC_URI[md5sum] SRC_URI[sha256sum] May 27 22:51:10 put all that(the recipes files) in the right place May 27 22:51:12 and bitbake it May 27 22:51:45 which file i have to copy May 27 22:51:47 ? May 27 22:51:57 here i got 3 files May 27 22:51:59 http://git.opendreambox.org/?p=ghost/opendreambox-1.6;a=tree;f=recipes/mumudvb;h=d9f714585d68e12313a5bf36ef4842cafb8592b4;hb=HEAD May 27 22:52:06 yes May 27 22:52:10 copy all that May 27 22:52:31 put it in the opendreambox layer May 27 22:54:13 copy it on the right directory tough May 27 22:54:21 give me a minute to find the opendreambox layer May 27 22:58:06 hmmm it's not listed here: http://www.openembedded.org/wiki/LayerIndex May 27 22:59:12 let me clone it May 27 23:00:20 put the files in in meta-opendreambox/recipes-dreambox/mumudvd/ May 27 23:02:51 have i need to create this 2 folder ? May 27 23:03:00 recipes-dreambos May 27 23:03:16 yes May 27 23:03:26 debianser@debianser:~/Desktop/Dreambox/opendreambox/meta-openembedded$ ls May 27 23:03:28 COPYING.MIT README contrib meta-efl meta-gnome meta-gpe meta-initramfs meta-multimedia meta-oe meta-xfce toolchain-layer May 27 23:03:30