**** BEGIN LOGGING AT Sun Sep 18 02:59:56 2005 Sep 18 09:30:07 ~weather ksba Sep 18 09:30:11 Santa Barbara, Santa Barbara Municipal Airport, CA, United States; (KSBA) 34-25-34N 119-50-37W 3M; last updated: 2005.09.18 1353 UTC; Dew Point: 48.9 F (9.4 C); Pressure (altimeter): 29.89 in. Hg (1012 hPa); Relative Humidity: 92%; Sky conditions: clear; Temperature: 51.1 F (10.6 C); Visibility: 6 mile(s); Weather: Mist; Wind: Calm Sep 18 09:30:42 ~weather phnl Sep 18 09:30:45 Honolulu, Honolulu International Airport, HI, United States; (PHNL) 21-19-39N 157-56-35W 4M; last updated: 2005.09.18 1353 UTC; Dew Point: 66.9 F (19.4 C); Pressure (altimeter): 30 in. Hg (1015 hPa); Relative Humidity: 75%; Sky conditions: mostly clear; Temperature: 75.0 F (23.9 C); Visibility: 10 mile(s); Wind: from the ENE (070 degrees) at 5 MPH (4 KT) Sep 18 09:30:53 now thats more like it! Sep 18 09:31:00 ~weather pogg Sep 18 09:31:03 I can't find station code "POGG" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Sep 18 11:32:47 ep1220 ping! Sep 18 11:44:12 ep1220: what if we eliminate the pb2232 and just put the FT2232 directly on the board? we can get them for a good price and the only real issue is the prom (cheap) and the connector (usb B connector) Sep 18 13:15:03 rats. Sep 18 13:15:06 missed him. Sep 18 23:39:59 ka6sox: ping Sep 19 00:05:28 ep1220, pong Sep 19 00:06:05 I read Your suggestion in the log. Sep 19 00:06:40 Using the FTDI directly would make problems for build-it-yourself Sep 19 00:06:51 This chip has a 0.5mm pitch Sep 19 00:07:05 ah.. Sep 19 00:07:25 Also most other parts on the moduel are needed. Sep 19 00:07:32 ep... Sep 19 00:07:37 bummer Sep 19 00:07:46 Plus we would need a multilayer Sep 19 00:11:39 BTW: Do You know the PPC COP/JTAG IF ? **** ENDING LOGGING AT Mon Sep 19 02:59:56 2005