**** BEGIN LOGGING AT Fri Feb 03 02:59:56 2006
Feb 03 03:20:40 <fishhead> I am going to be going off my sleeping med for a trial to see how I do without it, and going to switch to a over the counter sleep aid, so if I get a little freaky, bear with me
Feb 03 03:26:19 <ka6sox-office> AchiestDragon, so that is all the adapters?
Feb 03 03:27:19 <AchiestDragon> well 4 of them 
Feb 03 03:27:42 <ka6sox-office> k
Feb 03 03:27:57 <ka6sox-office> the Buffers on the aztag are only good to 4.8v?
Feb 03 03:28:04 <AchiestDragon> the xilinx 6pin , the altera 10 pin , the arm 20 and 14 pin 
Feb 03 03:28:17 <ka6sox-office> those are the major ones.
Feb 03 03:28:33 <ka6sox-office> the Xilinx 6 pin allows me to use the flying leads I have.
Feb 03 03:29:02 <ka6sox-office> if you would be so kind as to put a row of male pins on the adapter :)
Feb 03 03:29:03 <AchiestDragon> well got a 5v compatabilaty board now also that will let you use it with 5v logic levels
Feb 03 03:29:30 <ka6sox-office> ah...cool
Feb 03 03:29:40 <fishhead> I heard good things about xilinx
Feb 03 03:29:55 <fishhead> fpga seems to be one of those techs where they said it would take over everything else
Feb 03 03:30:02 <fishhead> and instead it didn't turn out to be so hot
Feb 03 03:30:03 <AchiestDragon> hmmm,, remeber if there is no adaptor for a spesific format use the analizer cable with the probes on the end , going to document that 
Feb 03 03:30:07 <fishhead> but found another market where it owns all
Feb 03 03:30:15 <fishhead> kinda like ppc
Feb 03 03:30:17 <ka6sox-office> AchiestDragon, okay 
Feb 03 03:30:20 <fishhead> it's wicked in embedded space
Feb 03 03:30:39 <ka6sox-office> AchiestDragon, the analyzer cable is 36pin?
Feb 03 03:30:45 <ka6sox-office> (connector)
Feb 03 03:30:55 <AchiestDragon> no
Feb 03 03:31:01 <ka6sox-office> oh...
Feb 03 03:31:08 <ka6sox-office> I must have misunderstood
Feb 03 03:31:20 <AchiestDragon> page 16 on the sch
Feb 03 03:31:36 <ka6sox-office> looking
Feb 03 03:31:43 <AchiestDragon> there is the 36way that goes to the main board 
Feb 03 03:32:11 <ka6sox-office> ah..thats what I saw.
Feb 03 03:32:48 <AchiestDragon> but once it gets to the head pcb then its useing a 26way  standard for the analizer probes or the jtag adaptor pcbs to connect to 
Feb 03 03:33:02 <ka6sox-office> k
Feb 03 03:33:15 <ka6sox-office> I should look at the probes I have here.
Feb 03 03:33:47 <ka6sox-office> for my HP
Feb 03 03:33:53 <AchiestDragon> k
Feb 03 03:33:55 <AchiestDragon> :)
Feb 03 03:34:41 <ka6sox-office> its a 2X20 .1"
Feb 03 03:35:06 <ka6sox-office> the cable is weaved with fibres to strengthen it.
Feb 03 03:35:54 <ka6sox-office> (when I was building the Space Station Arm we had to do the same thing for the electronics cables.
Feb 03 03:38:54 <ka6sox-office> back from home in a bit
Feb 03 03:40:09 <AchiestDragon> btw the standard for the analizer probe cable i refered to was ment to read , standard .1" pitch connector 
Feb 03 03:41:23 * fishhead bbl
**** ENDING LOGGING AT Fri Feb 03 04:14:11 2006

**** BEGIN LOGGING AT Fri Feb 03 04:16:11 2006
Feb 03 04:30:19 <fishhead> what do you guys think of http://www.softwareandstuff.com/dm_MY69M.html
Feb 03 04:31:37 <ka6sox> dunno the quality of it but it looks good.
Feb 03 04:33:05 <fishhead> thx:
Feb 03 04:33:14 <fishhead> only paid $20 :)
Feb 03 04:45:47 <fishhead> well now I got a meter again
Feb 03 04:45:48 <fishhead> thx
**** ENDING LOGGING AT Fri Feb 03 10:59:56 2006