**** BEGIN LOGGING AT Thu Jul 05 02:59:56 2007 Jul 05 14:34:58 Hello, someone have information about Marvell Libertas JTAG? Jul 05 14:35:45 the Marvell 88W8510 or 88W8515 Jul 05 14:56:37 juanpaul: that information is highly restricted by marvell Jul 05 14:56:58 juanpaul: with that said, Jul 05 14:57:07 juanpaul: there are some documents floating around on the net\ Jul 05 14:57:57 prpplague, what we can do about this? Nothing? Jul 05 14:59:25 prpplague, there's a project called "Liberated Libertas" at this address: http://www.bitsum.com/openwiking/owbase/ow.asp?WL-530G Jul 05 15:00:49 prpplague, but, is specific for the asus WL-530g (88W8510), I have the Edimax EW-7203APg (88W8515) Jul 05 15:02:07 prpplague, I have 4 Edimax that wont bootup, and, i'm trying to found information to make it back alive Jul 05 15:05:47 prpplague, I will keep searching, when i have some news i will be back here Jul 05 15:10:05 juanpaul: marvell requires some serious NDA's to get datasheets Jul 05 15:11:57 prpplague, yeah, I think it's sucks Jul 05 15:13:01 prpplague, because this i will think 1.000.000 of times before buying any device made by them Jul 05 21:34:06 hello prpplague Jul 05 21:34:12 I am curious one question Jul 05 21:34:30 if I was banned in #edev, why did you let me idle and talk to folks in there 3 weeks before you did anything Jul 05 21:34:35 just a simple question Jul 05 21:35:50 and for the rest of you, 74HCT is sufficient for the wiggler correct or so I need a faster cmos version Jul 05 21:36:19 and any signalling issues with using a cat5 cable for the wigger Jul 05 21:36:28 flyback-: probably because i was not there Jul 05 21:36:38 ok fair enough then Jul 05 21:36:58 flyback-: i was not online due to a heavy work load and i was on holiday Jul 05 21:37:00 * flyback- is discovering how well cat5 works for things like his ttl serial card Jul 05 21:37:13 could have sworn you were in the channel many times when I checked logs Jul 05 21:37:26 but that's fine at least I know you weren't dicking with me Jul 05 21:37:28 so fair enouh Jul 05 21:37:33 ok Jul 05 21:37:59 man cat5 cable is so high quality even I can't burn off the insilation with my iron :P Jul 05 21:38:05 wish I had known yrs ago Jul 05 21:38:15 might have been more willing to do projects :P Jul 05 21:39:01 prpplague since I didn't have any max232's handy I did the reverse Jul 05 21:39:07 converted a rs232 card into a ttl card Jul 05 21:39:08 :P Jul 05 21:39:28 yeah it worked too the webpal bootloader came up till I dropped the whole thing :/ Jul 05 21:44:46 doh Jul 05 21:45:02 i'll fix it, I just been too damn busy with the job and health issues :P Jul 05 21:45:11 I mabye get in 1-2 hrs a day of actually sitting up in bed Jul 05 21:45:13 after work :P Jul 05 21:45:50 but damn all these yrs of never feeling like I could have done projects Jul 05 21:45:59 half of it was shitty irons and shitty wire that melted Jul 05 21:46:36 yep, gotta spend some money on quality parts and tools Jul 05 21:46:50 well I thought I did :P Jul 05 21:47:10 oh before I scoot Jul 05 21:47:12 check this Jul 05 21:47:17 you MUST CHECK THIS Jul 05 21:47:48 http://www.futurlec.com/Mini_RS232_TTL_3V.shtml Jul 05 21:47:53 http://www.futurlec.com/Mini_RS232_TTL_5V.shtml Jul 05 21:47:56 got cheap? Jul 05 21:48:11 and I know you can use one of these Jul 05 21:48:12 http://www.futurlec.com/Mini_SC.shtml Jul 05 21:49:42 those sd/mmc protoboards are nice Jul 05 21:49:47 work well with juicebox Jul 05 21:49:50 yeah they got a lot of cheap stuff Jul 05 21:49:58 rtc board like $5 etc Jul 05 21:50:44 * prpplague adds the futurlec products to the wiki page Jul 05 21:50:58 dude cf to ide adaptors are like $3-$4 places now and even claim to work with dma if the card does Jul 05 21:50:59 :) Jul 05 21:51:17 yeah I figured you would :P Jul 05 21:51:56 http://www.elinux.org/RS232_Level_Shifter Jul 05 21:52:13 cool :) Jul 05 21:52:37 yeah I been taking apart and looking at some older low end cable modem routers Jul 05 21:52:45 and they would make a nice arm7tdmi devel board Jul 05 21:53:16 I had a nice befsr one with 512kb flash and 512kb ram and the flash was plcc and the ram j-lead so I could have soldered in sockets to add more Jul 05 21:53:25 but my dad's router burned up so I ended up giving it to him :/ Jul 05 21:54:29 I been looking at that moble phone datacable mod but haven't found a source yet Jul 05 21:55:00 oh yeah one other url Jul 05 21:55:07 some cheap s*** usb stuff etc Jul 05 21:55:11 might be good source of parts etc Jul 05 21:55:35 www.dealextreme.com Jul 05 21:56:19 peace out Jul 05 22:00:23 http://www.futurlec.com/Mini_Opto_Isolator.shtml Jul 05 22:00:27 "flyback proof" Jul 05 22:00:28 :P **** ENDING LOGGING AT Fri Jul 06 02:59:57 2007