**** BEGIN LOGGING AT Thu Jul 19 02:59:58 2007 Jul 19 23:01:39 this is probably a faq, but is there any possible way to adapt a willem to connect to a jtag header? Jul 20 00:51:42 hello Jul 20 01:16:03 AchiestDragon: you seem the least idle -- is there a faq url for jtag n00bs? Jul 20 01:16:51 hmm ,, what you want to know Jul 20 01:18:24 well, for starters, are unbuffered cables for mips only, or would one be ok for arm? Jul 20 01:20:00 it depends , you need to check the voltage that the target will support Jul 20 01:20:38 some of the cheep jtag cables only support 5v signal levels , and some chips need 3.3v or 2.5v Jul 20 01:23:56 i'm referring to the design that has just four 100Ω resistors Jul 20 01:24:04 for 3.3V Jul 20 02:07:07 http://elm-chan.org/works/avrx/xilinx.png Jul 20 02:07:53 hmm Jul 20 02:08:01 this one Jul 20 02:08:41 http://www.frozeneskimo.com/electronics/xilinx-jtag-download-cable-schematic/ Jul 20 02:12:11 bed time for me anyway **** ENDING LOGGING AT Fri Jul 20 02:59:56 2007