**** BEGIN LOGGING AT Fri Feb 20 02:59:58 2009
Feb 20 04:59:11 <swinchen> any idea how I would convert the old format: target_script 0 reset program.script to the new format?  I think it is something like... $_TARGETNAME configure -event ??????? "script program.script"  but I dont what goes ???????
Feb 20 05:12:27 <swinchen> guess thats a no :/
Feb 20 05:54:22 <olympionex> I'm sure this place is for people discussing higher level issues, but is anyone willing to help me figure out a JTAG usage issue?
Feb 20 08:37:53 <blogic> hi
Feb 20 08:41:57 <blogic> so, i saw that there is now mips support :)
Feb 20 08:42:08 <blogic> like how mature is it ?
Feb 20 08:42:30 <blogic> sorry, i am just goind to dump some questions, i guess the reply time will be a bit in this channel
Feb 20 08:43:05 <blogic> i wanna get it up and running with some ralink, atheros and infineon mips32R1/R2
Feb 20 08:43:55 <blogic> i have a bdi already running on the atheros and the ralink, but the bdi is not mine and i need to return it at some point
Feb 20 08:44:14 <blogic> so i was thinking of using the usbprog benedikt sauther made and openocd
Feb 20 08:44:25 <blogic> does that make sense ?
Feb 20 08:44:40 <blogic> anything i should know, before ordering the pcbs 
Feb 20 12:50:59 <mib_tlnbkt> any idea around here on how to recover a bricked thecus n1200?
Feb 20 15:15:50 <brolin> hi all, i'm trying to recover a bootloader in a toradex-pxa270 system, i installed openocd and have a amontec-tiny jtag
Feb 20 15:16:59 <brolin> the openocd that i installed was from svn, when i run openocd i get the error
Feb 20 15:17:01 <brolin> Open On-Chip Debugger 1.0 (2009-02-20-09:46) svn:1377
Feb 20 15:17:01 <brolin> BUGS? Read http://svn.berlios.de/svnroot/repos/openocd/trunk/BUGS
Feb 20 15:17:01 <brolin> $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $
Feb 20 15:17:09 <brolin> invalid command name "is:#_config"
Feb 20 15:17:41 <brolin> any idea what means
Feb 20 15:18:50 <brolin> excuse me, was a uncommented line in the config file
Feb 20 15:22:22 <keesj> hi
Feb 20 15:34:45 <brolin> hi keesj 
Feb 20 15:37:43 <blogic> lo
Feb 20 15:38:46 <brolin> whe run openocd i get the next message invalid command name "daemon_startup_reset"
Feb 20 15:39:23 <brolin> and show messages related with old syntax
Feb 20 15:39:56 <brolin> the config file was stolen from a link at internet
Feb 20 15:40:09 <brolin> https://lists.berlios.de/pipermail/openocd-development/attachments/20070119/1162b9ab/attachment-0003.ksh
Feb 20 16:13:59 <olympionex> is it possible to permanantly damage a flash chip using jtag (other than exceeding its flash cycle rating)?
Feb 20 16:14:49 <olympionex> When I first connected my dev board, I was able to probe the external flash on the microcontroller, but not write to it
Feb 20 16:14:54 <olympionex> I would get an error
Feb 20 16:15:02 <olympionex> now the probe completely fails
Feb 20 16:20:12 <dirk2> keesj: ping
Feb 20 17:42:54 <johnrw> hey folks... I got an error... trying to setup gdb to openocd on an xscale board... and got "warning: shared library handler failed to enable breakpoint" which google says can be fixed with the "arm7_9 sw_bkpts enable" cmd... but on xscale... it doesn't work...
Feb 20 17:43:32 <johnrw> is there and alternate cmd for xscale?
Feb 20 17:43:51 <johnrw> I'm using openocd rev 728
**** ENDING LOGGING AT Sat Feb 21 02:59:57 2009